- Announcing Privoxy v.3.0.17 stable
------------------------------------------------------------------
-
-This is mainly a bug-fix release for the previously released Privoxy 3.0.16.
-
-It contains fixes for two bugs that could cause connections to hang under
-certain circumstances when keep-alive support was enabled, until they timed
-out or where closed by the server.
+ Announcing Privoxy 3.0.34 stable
+--------------------------------------------------------------------
-See http://www.privoxy.org/3.0.17/user-manual/whatsnew.html for details.
+Privoxy 3.0.34 fixes a few minor bugs and comes with a couple of
+general improvements and new features.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.34
--------------------------------------------------------------------
-*** Version 3.0.17 Stable ***
-
-- Fixed last-chunk-detection for responses where the content was small
- enough to be read with the body, causing Privoxy to wait for the
- end of the content until the server closed the connection or the
- request timed out. Reported by "Karsten" in #3028326.
-- Responses with status code 204 weren't properly detected as body-less
- like RFC2616 mandates. Like the previous bug, this caused Privoxy to
- wait for the end of the content until the server closed the connection
- or the request timed out. Fixes #3022042 and #3025553, reported by a
- user with no visible name. Most likely also fixes a bunch of other
- AJAX-related problem reports that got closed in the past due to
- insufficient information and lack of feedback.
-- Fixed an ACL bug that made it impossible to build a blacklist.
- Usually the ACL directives are used in a whitelist, which worked
- as expected, but blacklisting is still useful for public proxies
- where one only needs to deny known abusers access.
-- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
- network. This should make debugging various parsing issues a lot easier.
-- The IPv6 code is enabled by default on Windows versions that support it.
- Patch submitted by oCameLo in #2942729.
-- In mingw32 versions, the user.filter file is reachable through the
- GUI, just like default.filter is. Feature request 3040263.
-- Added the configure option --enable-large-file-support to set a few
- defines that are required by platforms like GNU/Linux to support files
- larger then 2GB. Mainly interesting for users without proper logfile
- management.
-- Logging with "debug 16" no longer stops at the first nul byte which is
- pretty useless. Non-printable characters are replaced with their hex value
- so the result can't span multiple lines making parsing them harder then
- necessary.
-- Privoxy logs when reading an action, filter or trust file.
-- Fixed incorrect regression test markup which caused a test in
- 3.0.16 to fail while Privoxy itself was working correctly.
- While Privoxy accepts hide-referer, too, the action name is actually
- hide-referrer which is also the name used one the final results page,
- where the test expected the alias.
-
-- CGI interface improvements:
- - In finish_http_response(), continue to add the 'Connection: close'
- header if the client connection will not be kept alive.
- Anonymously pointed out in #2987454.
- - Apostrophes in block messages no longer cause parse errors
- when the blocked page is viewed with JavaScript enabled.
- Reported by dg1727 in #3062296.
- - Fix a bunch of anchors that used underscores instead of dashes.
- - Allow to keep the client connection alive after crunching the previous request.
- Already opened server connections can be kept alive, too.
- - In cgi_show_url_info(), don't forget to prefix URLs that only contain
- http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
- - Show the 404 CGI page if cgi_send_user_manual() is called while
- local user manual delivery is disabled.
+- Bug fixes:
+ - Improve the handling of chunk-encoded responses by buffering the data
+ even if filters are disabled and properly keeping track of where the
+ various chunks are supposed to start and end. Previously Privoxy would
+ merely check the last bytes received to see if they looked like the
+ last-chunk. This failed to work if the last-chunk wasn't received in one
+ read and could also result in actual data being misdetected
+ as last-chunk.
+ Should fix: SF support request #1739.
+ Reported by: withoutname.
+ - remove_chunked_transfer_coding(): Refuse to de-chunk invalid data
+ Previously the data could get corrupted even further.
+ Now we simply pass the unmodified data to the client.
+ - gif_deanimate(): Tolerate multiple image extensions in a row.
+ This allows to deanimate all the gifs on:
+ https://commons.wikimedia.org/wiki/Category:Animated_smilies
+ Fixes SF bug #795 reported by Celejar.
+ - OpenSSL generate_host_certificate(): Use X509_get_subject_name()
+ instead of X509_get_issuer_name() to get the issuer for generated
+ website certificates so there are no warnings in the browser when using
+ an intermediate CA certificate instead of a self-signed root certificate.
+ Problem reported and patch submitted by Chakib Benziane.
+ - can_filter_request_body(): Fix a log message that contained a spurious u.
+ - handle_established_connection(): Check for pending TLS data from the client
+ before checking if data is available on the connection.
+ The TLS library may have already consumed all the data from the client
+ response in which case poll() and select() will not detect that data is
+ available to be read.
+ Sponsored by: Robert Klemme.
+ - ssl_send_certificate_error(): Don't crash if there's no certificate
+ information available. This is only relevant when Privoxy is built with
+ wolfSSL 5.0.0 or later (code not yet published). Earlier wolfSSL versions
+ or the other TLS backends don't seem to trigger the crash.
+ - socks5_connect(): Add support for target hosts specified as IPv4 address
+ Previously the IP address was sent as domain.
+
+- General improvements:
+ - Add a client-body-tagger action which creates tags based on
+ the content of the request body.
+ Sponsored by: Robert Klemme.
+ - When client-body filters are enabled, buffer the whole request
+ before opening a connection to the server.
+ Makes it less likely that the server connection times out
+ and we don't open a connection if the buffering fails anyway.
+ Sponsored by: Robert Klemme.
+ - Add periods to a couple of log messages.
+ - accept_connection(): Add missing space to a log message.
+ - Initialize ca-related defaults with strdup_or_die() so errors
+ aren't silently ignored.
+ - make_path: Use malloc_or_die() in cases where allocation errors
+ were already fatal anyway.
+ - handle_established_connection(): Improve an error message slightly.
+ - receive_client_request(): Reject https URLs without CONNECT request.
+ - Include all requests in the statistics if mutexes are available.
+ Previously in case of reused connections only the last request got
+ counted. The statistics still aren't perfect but it's an improvement.
+ - Add read_socks_reply() and start using it in socks5_connect()
+ to apply the socket timeout more consistently.
+ - socks5_connect(): Deal with domain names in the socks reply
+ - Add a filter for bundeswehr.de that hides the cookie and
+ privacy info banner.
- Action file improvements:
- - Enable user.filter by default. Suggested by David White in #3001830.
- - Block .sitestat.com/. Reported by johnd16 in #3002725.
- - Block .atemda.com/. Reported by johnd16 in #3002723.
- - Block js.adlink.net/. Reported by johnd16 in #3002720.
- - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
- - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
- - Fix problems noticed on Yahoo mail and news pages.
- - Remove the too broad yahoo section, only keeping the
- fast-redirects exception as discussed on ijbswa-devel@.
- - Don't block adesklets.sourceforge.net. Reported in #2974204.
- - Block chartbeat ping tracking. Reported in #2975895.
- - Tag CSS and image requests with cautious and medium settings, too.
- - Don't handle view.atdmt.com as image. It's used for click-throughs
- so users should be able to "go there anyway".
- Reported by Adam Piggott in #2975927.
- - Also let the refresh-tags filter remove invalid refresh tags where
- the 'url=' part is missing. Anonymously reported in #2986382.
- While at it, update the description to mention the fact that only
- refresh tags with refresh times above 9 seconds are covered.
- - javascript needs to be blocked with +handle-as-empty-document to
- work around Firefox bug 492459. So move .js blockers from
- +block{Might be a web-bug.} -handle-as-empty-document to
- +block{Might be a web-bug.} +handle-as-empty-document.
- - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
- - Block another omniture tracking domain.
- - Added a range-requests tagger.
- - Added two sections to get Flickr's Ajax interface working with
- default pre-settings. If you change the configuration to block
- cookies by default, you'll need additional exceptions.
- Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.
-
-- Documentation improvements:
- - Explicitly mention how to match all URLs.
- - Consistently recommend socks5 in the Tor FAQ entry and mention
- its advantage compared to socks4a. Reported by David in #2960129.
- - Slightly improve the explanation of why filtering may appear
- slower than it is.
- - Grammar fixes for the ACL section.
- - Fixed a link to the 'intercepting' entry and add another one.
- - Rename the 'Other' section to 'Mailing Lists' and reword it
- to make it clear that nobody is forced to use the trackers
- - Note that 'anonymously' posting on the trackers may not always
- be possible.
- - Suggest to enable debug 32768 when suspecting parsing problems.
-
-- Privoxy-Log-Parser improvements:
- - Gather statistics for ressources, methods, and HTTP versions
- used by the client.
- - Also gather statistics for blocked and redirected requests.
- - Provide the percentage of keep-alive offers the client accepted.
- - Add a --url-statistics-threshold option.
- - Add a --host-statistics-threshold option to also gather
- statistics about how many request where made per host.
- - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
- - Add a --shorten-thread-ids option to replace the thread id with
- a decimal number.
- - Accept and ignore: Looks like we got the last chunk together
- with the server headers. We better stop reading.
- - Accept and ignore: Continue hack in da house.
- - Accept and higlight: Rejecting connection from 10.0.0.2.
- Maximum number of connections reached.
- - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
- - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
- - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
- - Accept and highlight: Reducing expected bytes to 0. Marking
- the server socket tainted after throwing 4 bytes away.
- - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'
-
-- Code cleanups:
- - Remove the next member from the client_state struct. Only the main
- thread needs access to all client states so give it its own struct.
- - Garbage-collect request_contains_null_bytes().
- - Ditch redundant code in unload_configfile().
- - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
- - In write_socket(), remove the write-only variable write_len in
- an ifdef __OS2__ block. Spotted by cppcheck.
- - In connect_to(), don't declare the variable 'flags' on OS/2 where
- it isn't used. Spotted by cppcheck.
- - Limit the scope of various variables. Spotted by cppcheck.
- - In add_to_iob(), turn an interestingly looking for loop into a
- boring while loop.
- - Code cleanup in preparation for external filters.
- - In listen_loop(), mention the socket on which we accepted the
- connection, not just the source IP address.
- - In write_socket(), also log the socket we're writing to.
- - In log_error(), assert that escaped characters get logged
- completely or not at all.
- - In log_error(), assert that ival and sval have reasonable values.
- There's no reason not to abort() if they don't.
- - Remove an incorrect cgi_error_unknown() call in a
- cannnot-happen-situation in send_crunch_response().
- - Clean up white-space in http_response definition and
- move the crunch_reason to the beginning.
- - Turn http_response.reason into an enum and rename it
- to http_response.crunch_reason.
- - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
- - Fix white-space in a log message in remove_chunked_transfer_coding().
- While at it, add a note that the message doesn't seem to
- be entirely correct and should be improved later on.
-
-- GNUmakefile improvements:
- - Use $(SSH) instead of ssh, so one only needs to specify a username once.
- - Removed references to the action feedback thingy that hasn't been
- working for years.
- - Consistently use shell.sourceforge.net instead of shell.sf.net so
- one doesn't need to check server fingerprints twice.
- - Removed GNUisms in the webserver and webactions targets so they
- work with standard tar.
+ - Disable filter{banners-by-size} for .freiheitsfoo.de/.
+ - Disable filter{banners-by-size} for freebsdfoundation.org/.
+ - Disable fast-redirects for consent.youtube.com/.
+ - Block requests to ups.xplosion.de/.
+ - Block requests for elsa.memoinsights.com/t.
+ - Fix a typo in a test.
+ - Disable fast-redirects for launchpad.net/.
+ - Unblock .eff.org/.
+ - Stop unblocking .org/.*(image|banner) which appears to be too generous
+ It let requests like:
+ https://stats.noblogs.org/piwik.php?action_name=anti%20gentrifizierungs%20fest&idsite=10175&rec=1&r=220192&h=17&m=7&s=44&url=https%3A%2F%2Fmuellemcalling.noblogs.org%2F&urlref=https%3A%2F%2Fmuellemcalling.noblogs.org%2Finfostande%2F&_id=&_idn=1&_refts=0&send_image=0&cookie=1&res=1366x768&pv_id=eqr7jX&pf_net=7&pf_srv=3&pf_tfr=2281&pf_dm1=156
+ pass.
+ The example URL http://www.gnu.org/graphics/gnu-head-banner.png is
+ already unblocked due to .gnu.org being unblocked.
+ - Unblock adfd.org/.
+ - Disable filter{banners-by-link} for .eff.org/.
+ - Block requests to odb.outbrain.com/.
+ - Disable fast-redirects for .gandi.net/.
+ - Disable fast-redirects{} for .onion/.*/status/.
+ - Disable fast-redirects{} for twitter.com/.*/status/.
+ - Unblock pinkstinks.de/.
+ - Disable fast-redirects for .hagalil.com/.
+
+- Privoxy-Log-Parser:
+ - Bump version to 0.9.5.
+ - Highlight more log messages.
+ - Highlight the Crunch reason only once. Previously the "crunch reason"
+ could also be highlighted when the URL contained a matching string.
+ The real crunch reason only occurs once per line, so there's no need
+ to continue looking for it after it has been found once.
+ While at it, add a comment with an example log line.
+
+- uagen:
+ - Bump version to 1.2.4.
+ - Update BROWSER_VERSION and BROWSER_REVISION to 102.0
+ to match the User-Agent of the current Firefox ESR.
+ - Explicitly document that changing the 'Gecko token' is suspicious.
+ - Consistently use a lower-case 'c' as copyright symbol.
+ - Bump copyright.
+ - Add 'aarch64' as Linux architecture.
+ - Add OpenBSD architecture 'arm64'.
+ - Stop using sparc64 as FreeBSD architecture.
+ It hasn't been supported for a while now.
+
+- Build system:
+ - Makefile: Add a 'dok' target that depends on the 'error' target
+ to show the "You are not using GNU make or did nor run configure"
+ message.
+ - configure: Fix --with-msan option.
+ Also (probably) reported by Andrew Savchenko.
+
+- macOS build system:
+ - Enable HTTPS inspection when building the macOS binary
+ (using OpenSSL as TLS library).
+
+- Documentation:
+ - Add OpenSSL to the list of libraries that may be licensed under the
+ Apache 2.0 license in which case the linked Privoxy binary has to be
+ distributed under the GPLv3 or later.
+ - config: Fix the documented ca-directory default value.
+ Reported by avoidr.
+ - Rebuild developer-manual and tidy with 'HTML Tidy for FreeBSD version 5.8.0'.
+ - Update developer manual with new macOS packaging instructions.
+ - Note that the FreeBSD installation instructions work for
+ ElectroBSD as well.
+ - Note that FreeBSD/ElectroBSD users can try to install Privoxy
+ as binary package using 'pkg'.
-----------------------------------------------------------------
About Privoxy:
Privoxy is Free Software and licensed under the GNU GPLv2.
-Privoxy is an associated project of Software in the Public Interest (SPI).
+Our TODO list is rather long. Helping hands and donations are welcome:
-Helping hands and donations are welcome:
+ * https://www.privoxy.org/participate
- * http://www.privoxy.org/faq/general.html#PARTICIPATE
+ * https://www.privoxy.org/donate
- * http://www.privoxy.org/faq/general.html#DONATE
-
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
+At present, Privoxy is known to run on Windows 95 and later versions
+(98, ME, 2000, XP, Vista, Windows 7, Windows 10 etc.), GNU/Linux
+(RedHat, SuSE, Debian, Fedora, Gentoo, Slackware and others),
+Mac OS X (10.4 and upwards on PPC and Intel processors), Haiku,
+DragonFly, ElectroBSD, FreeBSD, NetBSD, OpenBSD, Solaris,
+and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
Privoxy provides many supplemental features, that give the end-user
more control, more privacy and more freedom:
+ * Supports "Connection: keep-alive". Outgoing connections can be kept
+ alive independently from the client. Currently not available on all
+ platforms.
- * Supports "Connection: keep-alive". Outgoing connections can be kept
- alive independently from the client. Currently not available on all
- platforms.
+ * Supports IPv6, provided the operating system does so too,
+ and the configure script detects it.
- * Supports IPv6, provided the operating system does so too,
- and the configure script detects it.
+ * Supports tagging which allows to change the behaviour based on client
+ and server headers.
- * Supports tagging which allows to change the behaviour based on client
- and server headers.
+ * Supports https inspection which allows to filter https requests.
- * Can be run as an "intercepting" proxy, which obviates the need to
- configure browsers individually.
+ * Can be run as an "intercepting" proxy, which obviates the need to
+ configure browsers individually.
- * Sophisticated actions and filters for manipulating both server and
- client headers.
+ * Sophisticated actions and filters for manipulating both server and
+ client headers.
- * Can be chained with other proxies.
+ * Can be chained with other proxies.
- * Integrated browser based configuration and control utility at
- http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
- tracing of rule and filter effects. Remote toggling.
+ * Integrated browser based configuration and control utility at
+ http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
+ tracing of rule and filter effects. Remote toggling.
- * Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ * Web page filtering (text replacements, removes banners based on size,
+ invisible "web-bugs" and HTML annoyances, etc.)
- * Modularized configuration that allows for standard settings and user
- settings to reside in separate files, so that installing updated actions
- files won't overwrite individual user settings.
+ * Modularized configuration that allows for standard settings and user
+ settings to reside in separate files, so that installing updated actions
+ files won't overwrite individual user settings.
- * Support for Perl Compatible Regular Expressions in the configuration
- files, and a more sophisticated and flexible configuration syntax.
+ * Support for Perl Compatible Regular Expressions in the configuration
+ files, and a more sophisticated and flexible configuration syntax.
- * GIF de-animation.
+ * GIF de-animation.
- * Bypass many click-tracking scripts (avoids script redirection).
+ * Bypass many click-tracking scripts (avoids script redirection).
- * User-customizable HTML templates for most proxy-generated pages (e.g.
- "blocked" page).
+ * User-customizable HTML templates for most proxy-generated pages (e.g.
+ "blocked" page).
- * Auto-detection and re-reading of config file changes.
-
- * Most features are controllable on a per-site or per-location basis.
+ * Auto-detection and re-reading of config file changes.
+ * Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
-Home Page:
- http://www.privoxy.org/
+Home Page:
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>
projects / privoxy.git / blobdiff