-Junkbuster User Manual
+Privoxy User Manual
- By: Junkbuster Developers
+ By: Privoxy Developers
- $Id: user-manual.sgml,v 1.32 2002/03/03 09:26:06 joergs Exp $
+ $Id: user-manual.sgml,v 1.53 2002/03/24 11:51:00 swa Exp $
- The user manual gives the users information on how to install and
- configure Internet Junkbuster. Internet Junkbuster is an application
- that provides privacy and security to users of the World Wide Web.
+ The user manual gives users information on how to install, configure
+ and use Privoxy. Privoxy is a web proxy with advanced filtering
+ capabilities for protecting privacy, filtering web page content,
+ managing cookies, controlling access, and removing ads, banners,
+ pop-ups and other obnoxious Internet Junk. Privoxy has a very flexible
+ configuration and can be customized to suit individual needs and
+ tastes. Privoxy has application for both stand-alone systems and
+ multi-user networks.
You can find the latest version of the user manual at
[1]http://ijbswa.sourceforge.net/user-manual/.
-
- Feel free to send a note to the developers at
- <[2]ijbswa-developers@lists.sourceforge.net>.
_________________________________________________________________
Table of Contents
- 1. [3]Introduction
+ 1. [2]Introduction
- 1.1. [4]New Features
+ 1.1. [3]New Features
- 2. [5]Installation
+ 2. [4]Installation
- 2.1. [6]Source
- 2.2. [7]Red Hat
- 2.3. [8]SuSE
- 2.4. [9]OS/2
- 2.5. [10]Windows
- 2.6. [11]Other
+ 2.1. [5]Source
+ 2.2. [6]Red Hat
+ 2.3. [7]SuSE
+ 2.4. [8]OS/2
+ 2.5. [9]Windows
+ 2.6. [10]Other
- 3. [12]Junkbuster Configuration
+ 3. [11]Privoxy Configuration
- 3.1. [13]The Main Configuration File
- 3.2. [14]The Actions File
- 3.3. [15]The Filter File
- 3.4. [16]Templates
+ 3.1. [12]Controlling Privoxy with Your Web Browser
+ 3.2. [13]Configuration Files Overview
+ 3.3. [14]The Main Configuration File
- 4. [17]Quickstart to Using Junkbuster
- 5. [18]Contact the Developers
- 6. [19]Copyright and History
+ 3.3.1. [15]Defining Other Configuration Files
+ 3.3.2. [16]Other Configuration Options
+ 3.3.3. [17]Access Control List (ACL)
+ 3.3.4. [18]Forwarding
+ 3.3.5. [19]Windows GUI Options
+
+ 3.4. [20]The Actions File
+
+ 3.4.1. [21]URL Domain and Path Syntax
+ 3.4.2. [22]Actions
+ 3.4.3. [23]Aliases
+
+ 3.5. [24]The Filter File
+ 3.6. [25]Templates
+
+ 4. [26]Quickstart to Using Privoxy
- 6.1. [20]License
- 6.2. [21]History
+ 4.1. [27]Command Line Options
- 7. [22]See also
- 8. [23]Appendix
+ 5. [28]Contacting the Developers, Bug Reporting and Feature Requests
+ 6. [29]Copyright and History
- 8.1. [24]Regular Expressions
+ 6.1. [30]License
+ 6.2. [31]History
+
+ 7. [32]See also
+ 8. [33]Appendix
+
+ 8.1. [34]Regular Expressions
+
+ 21
+ 22
+ 23
+ 24
+ 25
+ 26
+ 27
+ 28
+ 29
+
+ 8.2. [35]Privoxy's Internal Pages
+ 8.3. [36]Anatomy of an Action
1. Introduction
- Internet Junkbuster is a web proxy with advanced filtering
- capabilities for protecting privacy, filtering web page content,
- managing cookies, controlling access, and removing ads, banners,
- pop-ups and other obnoxious Internet Junk. Junkbuster has a very
- flexible configuration and can be customized to suit individual needs
- and tastes. Internet Junkbuster has application for both stand-alone
- systems and multi-user networks.
+ Privoxy is a web proxy with advanced filtering capabilities for
+ protecting privacy, filtering and modifying web page content, managing
+ cookies, controlling access, and removing ads, banners, pop-ups and
+ other obnoxious Internet Junk. Privoxy has a very flexible
+ configuration and can be customized to suit individual needs and
+ tastes. Privoxy has application for both stand-alone systems and
+ multi-user networks.
This documentation is included with the current BETA version of
- Internet Junkbuster and is incomplete at this point. The most up to
- date reference for the time being is still the comments in the source
- files and in the individual configuration files. Development of
- version 3.0 is currently nearing completion, and includes many
- significant changes and enhancements over earlier versions. The target
- release date for stable v3.0 RSN.
+ Privoxy and is mostly complete at this point. The most up to date
+ reference for the time being is still the comments in the source files
+ and in the individual configuration files. Development of version 3.0
+ is currently nearing completion, and includes many significant changes
+ and enhancements over earlier versions. The target release date for
+ stable v3.0 is "soon" ;-)
Since this is a BETA version, not all new features are well tested.
- This documentation may be slightly out of sync as a result. And there
- may be bugs, though hopefully not many!
+ This documentation may be slightly out of sync as a result (especially
+ with CVS sources). And there may be bugs, though hopefully not many!
_________________________________________________________________
1.1. New Features
- In addition to Junkbuster's traditional features of ad and banner
- blocking and cookie management, this is a list of new features
- currently under development:
+ In addition to Internet Junkbuster's traditional feature of ad and
+ banner blocking and cookie management, Privoxy provides new features,
+ some of them currently under development:
* Integrated browser based configuration and control utility
- ([25]http://i.j.b). Browser-based tracing of rule and filter
+ ([37]http://i.j.b). Browser-based tracing of rule and filter
effects.
- * Modularized configuration that will allow for system wide
- settings, and individual user settings. (not implemented yet,
- probably a 3.1 feature)
* Blocking of annoying pop-up browser windows.
* HTTP/1.1 compliant (most, but not all 1.1 features are supported).
* Support for Perl Compatible Regular Expressions in the
* Improved cookie management features (e.g. session based cookies).
* Builds from source on most UNIX-like systems. Packages available
for: Linux (RedHat, SuSE, or Debian), Windows, Sun Solaris, Mac
- OSX, OS/2.
+ OSX, OS/2, HP-UX 11 and AmigaOS.
* In addition, the configuration is much more powerful and versatile
over-all.
_________________________________________________________________
2. Installation
- Junkbuster is available as raw source code, or pre-compiled binaries.
- See the [26]Junkbuster Home Page for current release info. Junkbuster
- is also available via [27]CVS. This is the recommended approach at
- this time. But please be aware that CVS is constantly changing, and it
- may break in mysterious ways.
+ Privoxy is available as raw source code, or pre-compiled binaries. See
+ the [38]Privoxy Home Page for binaries and current release info.
+ Privoxy is also available via [39]CVS. This is the recommended
+ approach at this time. But please be aware that CVS is constantly
+ changing, and it may break in mysterious ways.
_________________________________________________________________
2.1. Source
For gzipped tar archives, unpack the source:
tar xzvf ijb_source_* [.tgz or .tar.gz]
- cd ijb_source_2.9.10_beta
+ cd ijb_source_2.9.11_beta
For retrieving the current CVS sources, you'll need the CVS package
installed first. To download CVS source:
This will create both binary and src RPMs in the usual places.
Example:
- /usr/src/redhat/RPMS/i686/junkbuster-2.9.10-1.i686.rpm
+ /usr/src/redhat/RPMS/i686/privoxy-2.9.11-1.i686.rpm
- /usr/src/redhat/SRPMS/junkbuster-2.9.10-1.src.rpm
+ /usr/src/redhat/SRPMS/privoxy-2.9.11-1.src.rpm
To install, of course:
- rpm -Uvv /usr/src/redhat/RPMS/i686/junkbuster-2.9.10-1.i686.rpm
+ rpm -Uvv /usr/src/redhat/RPMS/i686/privoxy-2.9.11-1.i686.rpm
- This will place the Junkbuster configuration files in
- /etc/junkbuster/, and log files in /var/log/junkbuster/.
+ This will place the Privoxy configuration files in /etc/privoxy/, and
+ log files in /var/log/privoxy/.
_________________________________________________________________
2.3. SuSE
This will create both binary and src RPMs in the usual places.
Example:
- /usr/src/packages/RPMS/i686/junkbuster-2.9.10-1.i686.rpm
+ /usr/src/packages/RPMS/i686/privoxy-2.9.11-1.i686.rpm
- /usr/src/packages/SRPMS/junkbuster-2.9.10-1.src.rpm
+ /usr/src/packages/SRPMS/privoxy-2.9.11-1.src.rpm
To install, of course:
- rpm -Uvv /usr/src/packages/RPMS/i686/junkbuster-2.9.10-1.i686.rpm
+ rpm -Uvv /usr/src/packages/RPMS/i686/privoxy-2.9.11-1.i686.rpm
- This will place the Junkbuster configuration files in
- /etc/junkbuster/, and log files in /var/log/junkbuster/.
+ This will place the Privoxy configuration files in /etc/privoxy/, and
+ log files in /var/log/privoxy/.
_________________________________________________________________
2.4. OS/2
- Junkbuster is packaged in a WarpIN self- installing archive. The
+ Privoxy is packaged in a WarpIN self- installing archive. The
self-installing program will be named depending on the release
version, something like: ijbos2_setup_1.2.3.exe. In order to install
it, simply run this executable or double-click on its icon and follow
- the WarpIN installation panels. A shadow of the Junkbuster executable
+ the WarpIN installation panels. A shadow of the Privoxy executable
will be placed in your startup folder so it will start automatically
whenever OS/2 starts.
- The directory you choose to install Junkbuster into will contain all
- of the configuration files.
+ The directory you choose to install Privoxy into will contain all of
+ the configuration files.
If you would like to build binary images on OS/2 yourself, you will
need a few Unix-like tools: autoconf, autoheader and sh. These tools
Some quick notes on other Operating Systems.
For FreeBSD (and other *BSDs?), the build will require gmake instead
- of the included make. gmake is available from [28]http://www.gnu.org.
+ of the included make. gmake is available from [40]http://www.gnu.org.
The rest should be the same as above for Linux/Unix.
_________________________________________________________________
-3. Junkbuster Configuration
+3. Privoxy Configuration
+
+ All Privoxy configuration is kept in text files. These files can be
+ edited with a text editor. Many important aspects of Privoxy can also
+ be controlled easily with a web browser.
+ _________________________________________________________________
+
+3.1. Controlling Privoxy with Your Web Browser
+
+ Privoxy can be reached by the special URL [41]http://i.j.b/ (or
+ alternately [42]http://ijbswa.sourceforge.net/config/), which is an
+ internal page. You will see the following section:
+
+Please choose from the following options:
+
+ * Show information about the current configuration
+ * Show the source code version numbers
+ * Show the client's request headers.
+ * Show which actions apply to a URL and why
+ * Toggle Privoxy on or off
+ * Edit the actions list
+
+
+ This should be self-explanatory. Note the last item is an editor for
+ the "actions list", which is where much of the ad, banner, cookie, and
+ URL blocking magic is configured as well as other advanced features of
+ Privoxy. This is an easy way to adjust various aspects of Privoxy
+ configuration. The actions file, and other configuration files, are
+ explained in detail below. Privoxy will automatically detect any
+ changes to these files.
+
+ "Toggle Privoxy On or Off" is handy for sites that might have problems
+ with your current actions and filters, or just to test if a site
+ misbehaves, whether it is Privoxy causing the problem or not. Privoxy
+ continues to run as a proxy in this case, but all filtering is
+ disabled.
+ _________________________________________________________________
+
+3.2. Configuration Files Overview
For Unix, *BSD and Linux, all configuration files are located in
- /etc/junkbuster/ by default. For MS Windows, OS/2, and AmigaOS these
- are all in the same directory as the Junkbuster executable. The name
- and number of configuration files has changed from previous versions,
- and is subject to change as development progresses.
+ /etc/privoxy/ by default. For MS Windows, OS/2, and AmigaOS these are
+ all in the same directory as the Privoxy executable. The name and
+ number of configuration files has changed from previous versions, and
+ is subject to change as development progresses.
The installed defaults provide a reasonable starting point, though
possibly aggressive by some standards. For the time being, there are
* The main configuration file is named config on Linux, Unix, BSD,
OS/2, and AmigaOS and config.txt on Windows.
- * The ijb.action file is used to define various "actions" relating
- to images, banners, pop-ups, access restrictions, banners and
- cookies. There is a CGI based editor for this file that can be
- accessed via [29]http://i.j.b. This is the easiest method of
- configuring actions. (Other actions files are included as well
- with differing levels of filtering and blocking, e.g.
+ * The default.action file is used to define various "actions"
+ relating to images, banners, pop-ups, access restrictions, banners
+ and cookies. There is a CGI based editor for this file that can be
+ accessed via [43]http://i.j.b. (Other actions files are included
+ as well with differing levels of filtering and blocking, e.g.
ijb-basic.action.)
- * The re_filterfile file can be used to rewrite the raw page
- content, including text as well as embedded HTML and JavaScript.
+ * The default.filter file can be used to re-write the raw page
+ content, including viewable text as well as embedded HTML and
+ JavaScript, and whatever else lurks on any given web page.
- ijb.action and re_filterfile can use Perl style regular expressions
- for maximum flexibility. All files use the "#" character to denote a
- comment. Such lines are not processed by Junkbuster. After making any
- changes, there is no need to restart Junkbuster in order for the
- changes to take effect. Junkbuster should detect such changes
+ default.action and default.filter can use Perl style regular
+ expressions for maximum flexibility. All files use the "#" character
+ to denote a comment. Such lines are not processed by Privoxy. After
+ making any changes, there is no need to restart Privoxy in order for
+ the changes to take effect. Privoxy should detect such changes
automatically.
While under development, the configuration content is subject to
please check all your configuration files on important issues.
_________________________________________________________________
-3.1. The Main Configuration File
+3.3. The Main Configuration File
Again, the main configuration file is named config on Linux/Unix/BSD
and OS/2, and config.txt on Windows. Configuration lines consist of an
blockfile blocklist.ini
- Indicates that the blockfile is named "blocklist.ini".
+ Indicates that the blockfile is named "blocklist.ini". (A default
+ installation does not use this.)
A "#" indicates a comment. Any part of a line following a "#" is
ignored, except if the "#" is preceded by a "\".
Thus, by placing a "#" at the start of an existing configuration line,
you can make it a comment and it will be treated as if it weren't
there. This is called "commenting out" an option and can be useful to
- turn off features: If you comment out the "logfile" line, junkbuster
- will not log to a file at all. Watch for the "default:" section in
- each explanation to see what happens if the option is left unset (or
+ turn off features: If you comment out the "logfile" line, Privoxy will
+ not log to a file at all. Watch for the "default:" section in each
+ explanation to see what happens if the option is left unset (or
commented out).
Long lines can be continued on the next line by using a "\" as the
very last character.
- There are various aspects of Junkbuster behavior that can be tuned.
+ There are various aspects of Privoxy behavior that can be tuned.
_________________________________________________________________
-3.1.1. Defining Other Configuration Files
+3.3.1. Defining Other Configuration Files
- Junkbuster can use a number of other files to tell it what ads to
- block, what cookies to accept, etc. This section of the configuration
- file tells Junkbuster where to find all those other files.
+ Privoxy can use a number of other files to tell it what ads to block,
+ what cookies to accept, etc. This section of the configuration file
+ tells Privoxy where to find all those other files.
- On Windows and AmigaOS, Junkbuster looks for these files in the same
- directory as the executable. On Unix and OS/2, Junkbuster looks for
- these files in the current working directory. In either case, an
- absolute path name can be used to avoid problems.
+ On Windows and AmigaOS, Privoxy looks for these files in the same
+ directory as the executable. On Unix and OS/2, Privoxy looks for these
+ files in the current working directory. In either case, an absolute
+ path name can be used to avoid problems.
When development goes modular and multi-user, the blocker, filter, and
per-user config will be stored in subdirectories of "confdir". For
The location of the configuration files:
- confdir /etc/junkbuster # No trailing /, please.
+ confdir /etc/privoxy # No trailing /, please.
The directory where all logging (i.e. logfile and jarfile) takes
place. No trailing "/", please:
- logdir /var/log/junkbuster
+ logdir /var/log/privoxy
Note that all file specifications below are relative to the above two
directories!
- The "ijb.action" file contains patterns to specify the actions to
+ The "default.action" file contains patterns to specify the actions to
apply to requests for each site. Default: Cookies to and from all
destinations are kept only during the current browser session (i.e.
they are not saved to disk). Pop-ups are disabled for all sites. All
- sites are filtered if "re_filterfile" specified. No sites are blocked.
- An empty image is displayed for filtered ads and other images
- (formerly "tinygif"). The syntax of this file is explained in detail
- [30]below.
+ sites are filtered through selected sections of "default.filter". No
+ sites are blocked. The Privoxy logo is displayed for filtered ads and
+ other images. The syntax of this file is explained in detail
+ [44]below. Other "actions" files are included, and you are free to use
+ any of them. They have varying degrees of aggressiveness.
- actionsfile ijb.action
+ actionsfile default.action
- The "re_filterfile" file contains content modification rules. These
- rules permit powerful changes on the content of Web pages, e.g., you
- could disable your favorite JavaScript annoyances, rewrite the actual
- content, or just have some fun replacing "Microsoft" with "MicroSuck"
- wherever it appears on a Web page. Default: No content modification,
- or whatever the developers are playing with :-/
+ The "default.filter" file contains content modification rules that use
+ "regular expressions". These rules permit powerful changes on the
+ content of Web pages, e.g., you could disable your favorite JavaScript
+ annoyances, re-write the actual displayed text, or just have some fun
+ replacing "Microsoft" with "MicroSuck" wherever it appears on a Web
+ page. Default: whatever the developers are playing with :-/
- re_filterfile re_filterfile
+ Filtering requires buffering the page content, which may appear to
+ slow down page rendering since nothing is displayed until all content
+ has passed the filters. (It does not really take longer, but seems
+ that way since the page is not incrementally displayed.) This effect
+ will be more noticeable on slower connections.
+
+ filterfile default.filter
The logfile is where all logging and error messages are written. The
- logfile can be useful for tracking down a problem with Junkbuster
- (e.g., it's not blocking an ad you think it should block) but in most
- cases you probably will never look at it.
+ logfile can be useful for tracking down a problem with Privoxy (e.g.,
+ it's not blocking an ad you think it should block) but in most cases
+ you probably will never look at it.
Your logfile will grow indefinitely, and you will probably want to
periodically remove it. On Unix systems, you can do this with a cron
job (see "man cron"). For Redhat, a logrotate script has been
included.
- On SuSE Linux systems, you can place a line like
- "/var/log/junkbuster.* +1024k 644 nobody.nogroup" in /etc/logfiles,
- with the effect that cron.daily will automatically archive, gzip, and
- empty the log, when it exceeds 1M size.
+ On SuSE Linux systems, you can place a line like "/var/log/privoxy.*
+ +1024k 644 nobody.nogroup" in /etc/logfiles, with the effect that
+ cron.daily will automatically archive, gzip, and empty the log, when
+ it exceeds 1M size.
Default: Log to the a file named logfile. Comment out to disable
logging.
logfile logfile
- The "jarfile" defines where Junkbuster stores the cookies it
- intercepts. Note that if you use a "jarfile", it may grow quite large.
- Default: Don't store intercepted cookies.
+ The "jarfile" defines where Privoxy stores the cookies it intercepts.
+ Note that if you use a "jarfile", it may grow quite large. Default:
+ Don't store intercepted cookies.
#jarfile jarfile
- If you specify a "trustfile", Junkbuster will only allow access to
- sites that are named in the trustfile. You can also mark sites as
- trusted referrers, with the effect that access to untrusted sites will
- be granted, if a link from a trusted referrer was used. The link
- target will then be added to the "trustfile". This is a very
- restrictive feature that typical users most probably want to leave
- disabled. Default: Disabled, don't use the trust mechanism.
+ If you specify a "trustfile", Privoxy will only allow access to sites
+ that are named in the trustfile. You can also mark sites as trusted
+ referrers, with the effect that access to untrusted sites will be
+ granted, if a link from a trusted referrer was used. The link target
+ will then be added to the "trustfile". This is a very restrictive
+ feature that typical users most probably want to leave disabled.
+ Default: Disabled, don't use the trust mechanism.
#trustfile trust
trust-info-url http://www.your-site.com/what_we_allow.html
_________________________________________________________________
-3.1.2. Other Configuration Options
+3.3.2. Other Configuration Options
This part of the configuration file contains options that control how
- Junkbuster operates.
+ Privoxy operates.
"Admin-address" should be set to the email address of the proxy
administrator. It is used in many of the proxy-generated pages.
#admin-address fill@me.in.please
"Proxy-info-url" can be set to a URL that contains more info about
- this Junkbuster installation, it's configuration and policies. It is
- used in many of the proxy-generated pages and its use is highly
- recommended in multi-user installations, since your users will want to
- know why certain content is blocked or modified. Default: Don't show a
- link to on-line documentation.
+ this Privoxy installation, it's configuration and policies. It is used
+ in many of the proxy-generated pages and its use is highly recommended
+ in multi-user installations, since your users will want to know why
+ certain content is blocked or modified. Default: Don't show a link to
+ on-line documentation.
proxy-info-url http://www.your-site.com/proxy.html
- "Listen-address" specifies the address and port where Junkbuster will
+ "Listen-address" specifies the address and port where Privoxy will
listen for connections from your Web browser. The default is to listen
- on the localhost port 8000, and this is suitable for most users. (In
+ on the localhost port 8118, and this is suitable for most users. (In
your web browser, under proxy configuration, list the proxy server as
- "localhost" and the port as "8000").
+ "localhost" and the port as "8118").
- If you already have another service running on port 8000, or if you
+ If you already have another service running on port 8118, or if you
want to serve requests from other machines (e.g. on your local
network) as well, you will need to override the default. The syntax is
"listen-address [<ip-address>]:<port>". If you leave out the IP
- address, junkbuster will bind to all interfaces (addresses) on your
+ address, Privoxy will bind to all interfaces (addresses) on your
machine and may become reachable from the Internet. In that case,
consider using access control lists (acl's) (see "aclfile" above), or
a firewall.
- For example, suppose you are running Junkbuster on a machine which has
+ For example, suppose you are running Privoxy on a machine which has
the address 192.168.0.1 on your local private network (192.168.0.0)
and has another outside connection with a different address. You want
it to serve requests from inside only:
- listen-address 192.168.0.1:8000
+ listen-address 192.168.0.1:8118
If you want it to listen on all addresses (including the outside
connection):
- listen-address :8000
+ listen-address :8118
If you do this, consider using ACLs (see "aclfile" above). Note: you
will need to point your browser(s) to the address and port that you
- have configured here. Default: localhost:8000 (127.0.0.1:8000).
+ have configured here. Default: localhost:8118 (127.0.0.1:8118).
The debug option sets the level of debugging information to log in the
logfile (and to the console in the Windows version). A debug level of
debug 8192 # ERROR = Non-fatal errors
It is highly recommended that you enable ERROR reporting (debug 8192),
- at least until the next stable release.
+ at least until v3.0 is released.
- The reporting of FATAL errors (i.e. ones which crash JunkBuster) is
+ The reporting of FATAL errors (i.e. ones which crash Privoxy) is
always on and cannot be disabled.
If you want to use CLF (Common Log Format), you should set "debug 512"
debug 4096 # Info
debug 8192 # Errors - *we highly recommended enabling this*
- Junkbuster normally uses "multi-threading", a software technique that
+ Privoxy normally uses "multi-threading", a software technique that
permits it to handle many different requests simultaneously. In some
cases you may wish to disable this -- particularly if you're trying to
- debug a problem. The "single-threaded" option forces Junkbuster to
- handle requests sequentially. Default: Multi-threaded mode.
+ debug a problem. The "single-threaded" option forces Privoxy to handle
+ requests sequentially. Default: Multi-threaded mode.
#single-threaded
- "toggle" allows you to temporarily disable all Junkbuster's filtering.
+ "toggle" allows you to temporarily disable all Privoxy's filtering.
Just set "toggle 0".
- The Windows version of Junkbuster puts an icon in the system tray,
- which also allows you to change this option. If you right-click on
- that icon (or select the "Options" menu), one choice is "Enable".
- Clicking on enable toggles Junkbuster on and off. This is useful if
- you want to temporarily disable Junkbuster, e.g., to access a site
- that requires cookies which you would otherwise have blocked. This can
- also be toggled via a web browser at the Junkbuster internal address
- of [31]http://i.j.b on any platform.
+ The Windows version of Privoxy puts an icon in the system tray, which
+ also allows you to change this option. If you right-click on that icon
+ (or select the "Options" menu), one choice is "Enable". Clicking on
+ enable toggles Privoxy on and off. This is useful if you want to
+ temporarily disable Privoxy, e.g., to access a site that requires
+ cookies which you would otherwise have blocked. This can also be
+ toggled via a web browser at the Privoxy internal address of
+ [45]http://i.j.b on any platform.
- "toggle 1" means Junkbuster runs normally, "toggle 0" means that
- Junkbuster becomes a non-anonymizing non-blocking proxy. Default: 1
- (on).
+ "toggle 1" means Privoxy runs normally, "toggle 0" means that Privoxy
+ becomes a non-anonymizing non-blocking proxy. Default: 1 (on).
toggle 1
For content filtering, i.e. the "+filter" and "+deanimate-gif"
- actions, it is necessary that Junkbuster buffers the entire document
+ actions, it is necessary that Privoxy buffers the entire document
body. This can be potentially dangerous, since a server could just
keep sending data indefinitely and wait for your RAM to exhaust. With
nasty consequences.
buffer-limit 4069
- To enable the web-based ijb.action file editor set enable-edit-actions
- to 1, or 0 to disable. Note that you must have compiled JunkBuster
- with support for this feature, otherwise this option has no effect.
- This internal page can be reached at [32]http://i.j.b.
+ To enable the web-based default.action file editor set
+ enable-edit-actions to 1, or 0 to disable. Note that you must have
+ compiled Privoxy with support for this feature, otherwise this option
+ has no effect. This internal page can be reached at [46]http://i.j.b.
Security note: If this is enabled, anyone who can use the proxy can
edit the actions file, and their changes will affect all users. For
enable-edit-actions 1
- Allow JunkBuster to be toggled on and off remotely, using your web
+ Allow Privoxy to be toggled on and off remotely, using your web
browser. Set "enable-remote-toggle"to 1 to enable, and 0 to disable.
- Note that you must have compiled JunkBuster with support for this
+ Note that you must have compiled Privoxy with support for this
feature, otherwise this option has no effect.
Security note: If this is enabled, anyone who can use the proxy can
- toggle it on or off (see [33]http://i.j.b), and their changes will
+ toggle it on or off (see [47]http://i.j.b), and their changes will
affect all users. For shared proxies, you probably want to disable
this. Default: enabled.
enable-remote-toggle 1
_________________________________________________________________
-3.1.3. Access Control List (ACL)
+3.3.3. Access Control List (ACL)
Access controls are included at the request of some ISPs and systems
administrators, and are not usually needed by individual users. Please
The field separator (FS) is whitespace (space or tab).
- IMPORTANT NOTE: If the junkbuster is using a forwarder (see below) or
- a gateway for a particular destination URL, the DST_ADDR that is
+ IMPORTANT NOTE: If Privoxy is using a forwarder (see below) or a
+ gateway for a particular destination URL, the DST_ADDR that is
examined is the address of the forwarder or the gateway and NOT the
address of the ultimate target. This is necessary because it may be
- impossible for the local Junkbuster to determine the address of the
+ impossible for the local Privoxy to determine the address of the
ultimate target (that's often what gateways are used for).
Here are a few examples to show how the ACL features work:
permit-access localhost
A silly example to illustrate permitting any host on the class-C
- subnet with Junkbuster to go anywhere:
+ subnet with Privoxy to go anywhere:
- permit-access www.junkbusters.com/24
+ permit-access www.privoxy.com/24
Except deny one particular IP address from using it at all:
- deny-access ident.junkbusters.com
+ deny-access ident.privoxy.com
You can also specify an explicit network address and subnet mask.
Explicit addresses do not have to be resolved to be used.
to allow all *.org domains. Every IP address listed must resolve
fully.
- An ISP may want to provide a Junkbuster that is accessible by "the
- world" and yet restrict use of some of their private content to hosts
- on its internal network (i.e. its own subscribers). Say, for instance
- the ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit
- netmask). This is how they could do it:
+ An ISP may want to provide a Privoxy that is accessible by "the world"
+ and yet restrict use of some of their private content to hosts on its
+ internal network (i.e. its own subscribers). Say, for instance the ISP
+ owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask). This
+ is how they could do it:
permit-access 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
# with the following exceptions
Anyone can access the proxy.
_________________________________________________________________
-3.1.4. Forwarding
+3.3.4. Forwarding
This feature allows chaining of HTTP requests via multiple proxies. It
can be used to better protect privacy and confidentiality when
requests via multiple gateways allowing transparent access to multiple
networks without having to modify browser configurations.
- Also specified here are SOCKS proxies. Junkbuster SOCKS 4 and SOCKS
- 4A. The difference is that SOCKS 4A will resolve the target hostname
- using DNS on the SOCKS server, not our local DNS client.
+ Also specified here are SOCKS proxies. Privoxy SOCKS 4 and SOCKS 4A.
+ The difference is that SOCKS 4A will resolve the target hostname using
+ DNS on the SOCKS server, not our local DNS client.
The syntax of each line is:
forward .* lpwa.com:8000
forward :443 .
- See the FAQ for instructions on how to automate the login procedure
- for LPWA. Some users have reported difficulties related to LPWA's use
- of "." as the last element of the domain, and have said that this can
- be fixed with this:
+ Some users have reported difficulties related to LPWA's use of "." as
+ the last element of the domain, and have said that this can be fixed
+ with this:
forward lpwa. lpwa.com:8000
forward .* proxy:8080
Also, we're told they insist on getting cookies and JavaScript, so you
- should add home.com to the cookie file. We consider JavaScript a
+ should allow cookies from home.com. We consider JavaScript a potential
security risk. Java need not be enabled.
In this example direct connections are made to all "internal" domains,
This is a bit tricky, but here's an example:
host-a has a PPP connection to isp-a.com. And host-b has a PPP
- connection to isp-b.com. host-a can run a Junkbuster proxy with
+ connection to isp-b.com. host-a can run a Privoxy proxy with
forwarding like this:
forward .* .
- forward isp-b.com host-b:8000
+ forward isp-b.com host-b:8118
- host-b can run a Junkbuster proxy with forwarding like this:
+ host-b can run a Privoxy proxy with forwarding like this:
forward .* .
- forward isp-a.com host-a:8000
+ forward isp-a.com host-a:8118
Now, anyone on the Internet (including users on host-a and host-b) can
set their browser's proxy to either host-a or host-b and be able to
forward localhost.localdomain . # Loopback address
forward www.ukc.mirror.ac.uk . # Specific host
- If you intend to chain Junkbuster and squid locally, then chain as
- browser -> squid -> junkbuster is the recommended way.
+ If you intend to chain Privoxy and squid locally, then chain as
+ browser -> squid -> privoxy is the recommended way.
Your squid configuration could then look like this:
- # Define junkbuster as parent cache
+ # Define Privoxy as parent cache
- cache_peer 127.0.0.1 parent 8000 0 no-query
+ cache_peer 127.0.0.1 parent 8118 0 no-query
# Define ACL for protocol FTP
acl FTP proto FTP
- # Do not forward ACL FTP to junkbuster
+ # Do not forward ACL FTP to privoxy
always_direct allow FTP
- # Do not forward ACL CONNECT (https) to junkbuster
+ # Do not forward ACL CONNECT (https) to privoxy
always_direct allow CONNECT
- # Forward the rest to junkbuster
+ # Forward the rest to privoxy
never_direct allow all
_________________________________________________________________
-3.1.5. Windows GUI Options
+3.3.5. Windows GUI Options
- Junkbuster has a number of options specific to the Windows GUI
- interface:
+ Privoxy has a number of options specific to the Windows GUI interface:
- If "activity-animation" is set to 1, the Junkbuster icon will animate
- when "Junkbuster" is active. To turn off, set to 0.
+ If "activity-animation" is set to 1, the Privoxy icon will animate
+ when "Privoxy" is active. To turn off, set to 0.
activity-animation 1
- If "log-messages" is set to 1, Junkbuster will log messages to the
+ If "log-messages" is set to 1, Privoxy will log messages to the
console window:
log-messages 1
log-max-lines 200
- If "log-highlight-messages" is set to 1, Junkbuster will highlight
+ If "log-highlight-messages" is set to 1, Privoxy will highlight
portions of the log messages with a bold-faced font:
log-highlight-messages 1
log-font-size 8
- "show-on-task-bar" controls whether or not Junkbuster will appear as a
+ "show-on-task-bar" controls whether or not Privoxy will appear as a
button on the Task bar when minimized:
show-on-task-bar 0
If "close-button-minimizes" is set to 1, the Windows close button will
- minimize Junkbuster instead of closing the program (close with the
- exit option on the File menu).
+ minimize Privoxy instead of closing the program (close with the exit
+ option on the File menu).
close-button-minimizes 1
The "hide-console" option is specific to the MS-Win console version of
- JunkBuster. If this option is used, Junkbuster will disconnect from
- and hide the command console.
+ Privoxy. If this option is used, Privoxy will disconnect from and hide
+ the command console.
#hide-console
_________________________________________________________________
-3.2. The Actions File
+3.4. The Actions File
- The "ijb.action" file (formerly actionsfile) is used to define what
- actions Junkbuster takes, and thus determines how images, cookies and
- various other aspects of HTTP content and transactions are handled.
- Images can be anything you want, including ads, banners, or just some
- obnoxious image that you would rather not see. Cookies can be accepted
- or rejected, or accepted only during the current browser session (i.e.
- not written to disk). Changes to ijb.action should be immediately
- visible to Junkbuster without the need to restart.
+ The "default.action" file (formerly actionsfile) is used to define
+ what actions Privoxy takes, and thus determines how images, cookies
+ and various other aspects of HTTP content and transactions are
+ handled. Images can be anything you want, including ads, banners, or
+ just some obnoxious URL that you would rather not see. Cookies can be
+ accepted or rejected, or accepted only during the current browser
+ session (i.e. not written to disk). Changes to default.action should
+ be immediately visible to Privoxy without the need to restart.
+
+ The easiest way to edit "actions" file is with a browser by loading
+ [48]http://i.j.b/, and then select "Edit Actions List". A text editor
+ can also be used.
To determine which actions apply to a request, the URL of the request
is compared to all patterns in this file. Every time it matches, the
list of applicable actions for the URL is incrementally updated. You
- can trace this process by visiting [34]http://i.j.b/show-url-info.
-
- The actions file can be edited with a browser by loading
- [35]http://i.j.b/, and then select "Edit Actions".
+ can trace this process by visiting [49]http://i.j.b/show-url-info.
There are four types of lines in this file: comments (begin with a "#"
character), actions, aliases and patterns, all of which are explained
- below, as well as the configuration file syntax that Junkbuster
+ below, as well as the configuration file syntax that Privoxy
understands.
_________________________________________________________________
-3.2.1. URL Domain and Path Syntax
+3.4.1. URL Domain and Path Syntax
Generally, a pattern has the form <domain>/<path>, where both the
<domain> and <path> part are optional. If you only specify a domain
"www4.example.com", "wwwd.example.com", "wwwz.example.com", etc., but
not "wwww.example.com".
- If Junkbuster was compiled with "pcre" support (default), Perl
- compatible regular expressions can be used. See the pcre/docs/
- directory or "man perlre" (also available on
- [36]http://www.perldoc.com/perl5.6/pod/perlre.html) for details. A
- brief discussion of regular expressions is in the [37]Appendix. For
+ If Privoxy was compiled with "pcre" support (default), Perl compatible
+ regular expressions can be used. See the pcre/docs/ directory or "man
+ perlre" (also available on
+ [50]http://www.perldoc.com/perl5.6/pod/perlre.html) for details. A
+ brief discussion of regular expressions is in the [51]Appendix. For
instance:
/.*/advert[0-9]+\.jpe?g - would match a URL from any domain, with any
starts with "PaTtErN" in exactly this capitalization.
_________________________________________________________________
-3.2.2. Actions
+3.4.2. Actions
Actions are enabled if preceded with a "+", and disabled if preceded
with a "-". Actions are invoked by enclosing the action name in curly
{-name} # disable this action totally
If nothing is specified in this file, no "actions" are taken. So in
- this case JunkBuster would just be a normal, non-blocking,
+ this case Privoxy would just be a normal, non-blocking,
non-anonymizing proxy. You must specifically enable the privacy and
- blocking features you need (although the provided default ijb.action
- file will give a good starting point).
+ blocking features you need (although the provided default
+ default.action file will give a good starting point).
Later defined actions always over-ride earlier ones. For multi-valued
actions, the actions are applied in the order they are specified.
- The list of valid Junkbuster "actions" are:
+ The list of valid Privoxy "actions" are:
* Add the specified HTTP header, which is not checked for validity.
You may specify this many times to specify many different headers:
+add-header{Name: value}
- * Block this URL totally.
+ * Block this URL totally. In a default installation, a "blocked" URL
+ will result in bright red banner that says "BLOCKED", with a
+ reason why it is being blocked.
+block
* De-animate all animated GIF images, i.e. reduce them to their last
* "+downgrade" will downgrade HTTP/1.1 client requests to HTTP/1.0
and downgrade the responses as well. Use this action for servers
- that use HTTP/1.1 protocol features that Junkbuster doesn't handle
+ that use HTTP/1.1 protocol features that Privoxy doesn't handle
well yet. HTTP/1.1 is only partially implemented. Default is not
to downgrade requests.
+downgrade
time is wasted, while your browser ask the server for one redirect
after the other. Plus, it feeds the advertisers.
The "+fast-redirects" option enables interception of these
- requests by Junkbuster, who will cut off all but the last valid
- URL in the request and send a local redirect back to your browser
+ requests by Privoxy, who will cut off all but the last valid URL
+ in the request and send a local redirect back to your browser
without contacting the remote site.
+fast-redirects
- * Filter the website through the re_filterfile:
- +filter{filename}
+ * Apply the filters in the section_header section of the
+ default.filter file to the site(s). default.filter sections are
+ grouped according to like functionality.
+ +filter{section_header}
+ Filter sections that are pre-defined in the supplied
+ default.filter include:
+
+ html-annoyances: Get rid of particularly annoying HTML abuse.
+
+ js-annoyances: Get rid of particularly annoying JavaScript abuse
+
+ no-poups: Kill all popups in JS and HTML
+
+ frameset-borders: Give frames a border
+
+ webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking)
+
+ no-refresh: Automatic refresh sucks on auto-dialup lines
+
+ fun: Text replacements for subversive browsing fun!
+
+ nimda: Remove (virus) Nimda code.
+
+ banners-by-size: Kill banners by size
+
+ crude-parental: Kill all web pages that contain the words "sex" or
+ "warez"
+
* Block any existing X-Forwarded-for header, and do not add a new
one:
+hide-forwarded
* Treat this URL as an image. This only matters if it's also
"+block"ed, in which case a "blocked" image can be sent rather
than a HTML page. See "+image-blocker{}" below for the control
- over what is actually sent.
+ over what is actually sent. If you want invisible ads, they should
+ be defined as images and blocked. And also, "image-blocker" should
+ be set to "blank".
+image
* Decides what to do with URLs that end up tagged with "{+block
- +image}". There are 4 options. "-image-blocker" will send a HTML
- "blocked" page, usually resulting in a "broken image" icon.
- "+image-blocker{logo}" will send a "JunkBuster" image.
- "+image-blocker{blank}" will send a 1x1 transparent GIF image. And
- finally, "+image-blocker{http://xyz.com}" will send a HTTP
- temporary redirect to the specified image. This has the advantage
- of the icon being being cached by the browser, which will speed up
- the display.
+ +image}", e.g an advertizement. There are five options.
+ "-image-blocker" will send a HTML "blocked" page, usually
+ resulting in a "broken image" icon. "+image-blocker{logo}" will
+ send a Privoxy logo image. "+image-blocker{blank}" will send a 1x1
+ transparent GIF image. And finally,
+ "+image-blocker{http://xyz.com}" will send a HTTP temporary
+ redirect to the specified image. This has the advantage of the
+ icon being being cached by the browser, which will speed up the
+ display. "+image-blocker{pattern}" will send a checkboard type
+ pattern, which scales better than the logo (which can get blocky
+ if the browser enlarges it too much).
+image-blocker{logo}
+image-blocker{blank}
+ +image-blocker{pattern}
+image-blocker{http://i.j.b/send-banner}
* By default (i.e. in the absence of a "+limit-connect" action),
- Junkbuster will only allow CONNECT requests to port 443, which is
- the standard port for https as a precaution.
+ Privoxy will only allow CONNECT requests to port 443, which is the
+ standard port for https as a precaution.
The CONNECT methods exists in HTTP to allow access to secure
websites (https:// URLs) through proxies. It works very simply:
the proxy connects to the server on the specified port, and then
#and above 500 are OK.
* "+no-compression" prevents the website from compressing the data.
- Some websites do this, which can be a problem for Junkbuster,
- since "+filter", "+no-popup" and "+gif-deanimate" will not work on
+ Some websites do this, which can be a problem for Privoxy, since
+ "+filter", "+no-popup" and "+gif-deanimate" will not work on
compressed data. This will slow down connections to those
websites, though. Default is "nocompression" is turned on.
+nocompression
www.ukc.ac.uk/cgi-bin/wac\.cgi\?
login.yahoo.com
- Turn on page filtering, with one exception for sourceforge:
+ Turn on page filtering according to rules in the defined sections of
+ refilterfile, and make one exception for sourceforge:
- # Run everything through the default filter file (re_filterfile):
- {+filter}
+ # Run everything through the filter file, using only the
+ # specified sections:
+ +filter{html-annoyances} +filter{js-annoyances} +filter{no-popups}\
+ +filter{webbugs} +filter{nimda} +filter{banners-by-size}
- # But please don't re_filter code from sourceforge!
+ # Then disable filtering of code from sourceforge!
{-filter}
.cvs.sourceforge.net
/.*/ad-bin/
/.*/adlib/server\.cgi
/autoads/
+
+ Note that many of these actions have the potential to cause a page to
+ misbehave, possibly even not to display at all. There are many ways a
+ site designer may choose to design his site, and what HTTP header
+ content he may depend on. There is no way to have hard and fast rules
+ for all sites. See the [52]Appendix for a brief example on
+ troubleshooting actions.
_________________________________________________________________
-3.2.3. Aliases
+3.4.3. Aliases
- Custom "actions", known to Junkbuster as "aliases", can be defined by
+ Custom "actions", known to Privoxy as "aliases", can be defined by
combining other "actions". These can in turn be invoked just like the
built-in "actions". Currently, an alias can contain any character
except space, tab, "=", "{" or "}". But please use only "a"- "z",
"0"-"9", "+", and "-". Alias names are not case sensitive, and must be
- defined before anything else in the ijb.actionfile ! And there can
+ defined before anything else in the default.actionfile ! And there can
only be one set of "aliases" defined.
Now let's define a few aliases:
.overclockers.co.uk
_________________________________________________________________
-3.3. The Filter File
+3.5. The Filter File
- The filter file defines what filtering of web pages Junkbuster does.
- The default filter file is re_filterfile, located in the config
- directory. In this file, any document content, whether viewable text
- or embedded non-visible content, can be changed.
+ Any web page can be dynamically modified with the filter file. This
+ modification can be removal, or re-writing, of any web page content,
+ including tags and non-visible content. The default filter file is
+ default.filter, located in the config directory.
+
+ The included example file is divided into sections. Each section
+ begins with the FILTER keyword, followed by the identifier for that
+ section, e.g. "FILTER: webbugs". Each section performs a similar type
+ of filtering, such as "html-annoyances".
This file uses regular expressions to alter or remove any string in
- the target page. Some examples from the included default
- re_filterfile:
+ the target page. The expressions can only operate on one line at a
+ time. Some examples from the included default default.filter:
Stop web pages from displaying annoying messages in the status bar by
deleting such references:
- # The status bar is for displaying link targets, not pointless buzzwo
- rds.
- # Again, check it out on http://www.airport-cgn.de/.
- s/status='.*?';*//ig
+ FILTER: html-annoyances
+ # New browser windows should be resizeable and have a location and st
+ atus
+ # bar. Make it so.
+ #
+ s/resizable="?(no|0)"?/resizable=1/ig s/noresize/yesresize/ig
+ s/location="?(no|0)"?/location=1/ig s/status="?(no|0)"?/status=1/ig
+ s/scrolling="?(no|0|Auto)"?/scrolling=1/ig
+ s/menubar="?(no|0)"?/menubar=1/ig
+ # The <BLINK> tag was a crime!
+ #
+ s*<blink>|</blink>**ig
+ # Is this evil?
+ #
+ #s/framespacing="?(no|0)"?//ig
+ #s/margin(height|width)=[0-9]*//gi
Just for kicks, replace any occurrence of "Microsoft" with
- "MicroSuck":
+ "MicroSuck", and have a little fun with topical buzzwords:
+ FILTER: fun
s/microsoft(?!.com)/MicroSuck/ig
+ # Buzzword Bingo:
+ #
+ s/industry-leading|cutting-edge|award-winning/<font color=red><b>BING
+ O!</b></font>/ig
- Kill those auto-refresh tags:
+ Kill those pesky little web-bugs:
- # Kill refresh tags. I like to refresh myself. Manually.
- # check it out on http://www.airport-cgn.de/ and go to the arrivals p
- age.
- #
- s/<meta[^>]*http-equiv[^>]*refresh.*URL=([^>]*?)"?>/<link rev="x-refr
- esh" href=$1>/i
- s/<meta[^>]*http-equiv="?page-enter"?[^>]*content=[^>]*>/<!--no page
- enter for me-->/i
+ # webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking)
+ FILTER: webbugs
+ s/<img\s+[^>]*?(width|height)\s*=\s*['"]?1\D[^>]*?(width|height)\s*=\
+ s*['"]?1(\D[^>]*?)?>/<!-- Squished WebBug -->/sig
_________________________________________________________________
-3.4. Templates
+3.6. Templates
- When Junkbuster displays one of its internal pages, such as a 404 Not
+ When Privoxy displays one of its internal pages, such as a 404 Not
Found error page, it uses the appropriate template. On Linux, BSD, and
- Unix, these are locate in /etc/junkbuster/templates by default. These
+ Unix, these are located in /etc/privoxy/templates by default. These
may be customized, if desired.
_________________________________________________________________
-4. Quickstart to Using Junkbuster
+4. Quickstart to Using Privoxy
- Install package, then run and enjoy! JunkBuster accepts only one
- command line option -- the configuration file to be used. Example Unix
- startup command:
+ Install package, then run and enjoy! Privoxy is typically started by
+ specifying the main configuration file to be used on the command line.
+ Example Unix startup command:
- # /usr/sbin/junkbuster /etc/junkbuster/config
+ # /usr/sbin/privoxy /etc/privoxy/config
An init script is provided for SuSE and Redhat.
- For for SuSE: /etc/rc.d/junkbuster start
+ For for SuSE: /etc/rc.d/privoxy start
- For RedHat: /etc/rc.d/init.d/junkbuster start
+ For RedHat: /etc/rc.d/init.d/privoxy start
- If no configuration file is specified on the command line, Junkbuster
+ If no configuration file is specified on the command line, Privoxy
will look for a file named config in the current directory. Except on
Win32 where it will try config.txt. If no file is specified on the
- command line and no default configuration file can be found,
- Junkbuster will fail to start.
+ command line and no default configuration file can be found, Privoxy
+ will fail to start.
Be sure your browser is set to use the proxy which is by default at
- localhost, port 8000. With Netscape (and Mozilla), this can be set
+ localhost, port 8118. With Netscape (and Mozilla), this can be set
under Edit -> Preferences -> Advanced -> Proxies -> HTTP Proxy. For
Internet Explorer: Tools > Internet Properties -> Connections -> LAN
Setting. Then, check "Use Proxy" and fill in the appropriate info
- (Address: localhost, Port: 8000). Include if HTTPS proxy support too.
+ (Address: localhost, Port: 8118). Include if HTTPS proxy support too.
The included default configuration files should give a reasonable
starting point, though may be somewhat aggressive in blocking junk.
You will probably want to keep an eye out for sites that require
- persistent cookies, and add these to ijb.action as needed. By default,
- most of these will be accepted only during the current browser
- session, until you add them to the configuration. If you want the
- browser to handle this instead, you will need to edit ijb.action and
- disable this feature. If you use more than one browser, it would make
- more sense to let Junkbuster handle this. In which case, the
- browser(s) should be set to accept all cookies.
+ persistent cookies, and add these to default.action as needed. By
+ default, most of these will be accepted only during the current
+ browser session, until you add them to the configuration. If you want
+ the browser to handle this instead, you will need to edit
+ default.action and disable this feature. If you use more than one
+ browser, it would make more sense to let Privoxy handle this. In which
+ case, the browser(s) should be set to accept all cookies.
If a particular site shows problems loading properly, try adding it to
- the {fragile} section of ijb.action. This will turn off most actions
- for this site.
+ the {fragile} section of default.action. This will turn off most
+ actions for this site.
- HTTP/1.1 support is not fully implemented. If browsers that support
- HTTP/1.1 (like Mozilla or recent versions of I.E.) experience
- problems, you might try to force HTTP/1.0 compatibility. For Mozilla,
- look under Edit -> Preferences -> Debug -> Networking. Or set the
- "+downgrade" config option in ijb.action.
+ Privoxy is HTTP/1.1 compliant, but not all 1.1 features are as yet
+ implemented. If browsers that support HTTP/1.1 (like Mozilla or recent
+ versions of I.E.) experience problems, you might try to force HTTP/1.0
+ compatibility. For Mozilla, look under Edit -> Preferences -> Debug ->
+ Networking. Or set the "+downgrade" config option in default.action.
- After running Junkbuster for a while, you can start to fine tune the
+ After running Privoxy for a while, you can start to fine tune the
configuration to suit your personal, or site, preferences and
requirements. There are many, many aspects that can be customized.
- "Actions" (as specified in ijb.action) can be adjusted by pointing
- your browser to [38]http://i.j.b/, and then follow the link to "edit
+ "Actions" (as specified in default.action) can be adjusted by pointing
+ your browser to [53]http://i.j.b/, and then follow the link to "edit
the actions list". (This is an internal page and does not require
Internet access.)
- In fact, various aspects of Junkbuster configuration can be viewed
- from this page, including current configuration parameters, source
- code version numbers, the browser's request headers, and "actions"
- that apply to a given URL. In addition to the ijb.action file editor
- mentioned above, Junkbuster can also be turned "on" and "off" from
- this page.
+ In fact, various aspects of Privoxy configuration can be viewed from
+ this page, including current configuration parameters, source code
+ version numbers, the browser's request headers, and "actions" that
+ apply to a given URL. In addition to the default.action file editor
+ mentioned above, Privoxy can also be turned "on" and "off" from this
+ page.
- If you encounter problems, please verify it is a Junkbuster bug, by
- disabling Junkbuster, and then trying the same page. Also, try another
+ If you encounter problems, please verify it is a Privoxy bug, by
+ disabling Privoxy, and then trying the same page. Also, try another
browser if possible to eliminate browser or site problems. Before
reporting it as a bug, see if there is not a configuration option that
is enabled that is causing the page not to load. You can then add an
developers (see below).
_________________________________________________________________
-5. Contact the Developers
+4.1. Command Line Options
+
+ Privoxy may be invoked with the following command-line options:
+
+ * --version
+ Print version info and exit, Unix only.
+ * --help
+ Print a short usage info and exit, Unix only.
+ * --no-daemon
+ Don't become a daemon, i.e. don't fork and become process group
+ leader, don't detach from controlling tty. Unix only.
+ * --pidfile FILE
+ On startup, write the process ID to FILE. Delete the FILE on exit.
+ Failiure to create or delete the FILE is non-fatal. If no FILE
+ option is given, no PID file will be used. Unix only.
+ * --user USER[.GROUP]
+ After (optionally) writing the PID file, assume the user ID of
+ USER, and if included the GID of GROUP. Exit if the privileges are
+ not sufficient to do so. Unix only.
+ * configfile
+ If no configfile is included on the command line, Privoxy will
+ look for a file named "config" in the current directory (except on
+ Win32 where it will look for "config.txt" instead). Specify full
+ path to avoid confusion.
+ _________________________________________________________________
+
+5. Contacting the Developers, Bug Reporting and Feature Requests
- Feature requests and other questions should be posted to the
- [39]Feature request page at SourceForge. There is also an archive
- there.
+ We value your feedback. However, to provide you with the best support,
+ please note:
+
+ * Use the [54]Sourceforge support forum to get help.
+ * Submit bugs only thru our [55]Sourceforge bug forum. Make sure
+ that the bug has not already been submitted. Please try to verify
+ that it is a Privoxy bug, and not a browser or site bug first. If
+ you are using your own custom configuration, please try the stock
+ configs to see if the problem is a configuration related bug. And
+ if not using the latest development snapshot, please try the
+ latest one. Or even better, CVS sources.
+ * Submit feature requests only thru our [56]Sourceforge feature
+ request forum.
+
+ For any other issues, feel free to use the [57]mailing lists.
Anyone interested in actively participating in development and related
- discussions can join the appropriate mailing list [40]here. Archives
+ discussions can join the appropriate mailing list [58]here. Archives
are available here too.
-
- Please report bugs, using the form at [41]Sourceforge. Please try to
- verify that it is a Junkbuster bug, and not a browser or site bug
- first. Also, check to make sure this is not already a known bug.
_________________________________________________________________
6. Copyright and History
6.1. License
- Internet Junkbuster is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
+ Privoxy is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the
+ Free Software Foundation; either version 2 of the License, or (at your
+ option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details, which is available from
- [42]the Free Software Foundation, Inc, 59 Temple Place - Suite 330,
+ [59]the Free Software Foundation, Inc, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.
_________________________________________________________________
6.2. History
Junkbuster was originally written by Anonymous Coders and
- [43]Junkbuster's Corporation, and was released as free open-source
- software under the GNU GPL. [44]Stefan Waldherr made many
- improvements, and started the [45]SourceForge project to rekindle
- development. The last stable release was v2.0.2, which has now grown
+ [60]Junkbuster's Corporation, and was released as free open-source
+ software under the GNU GPL. [61]Stefan Waldherr made many
+ improvements, and started the [62]SourceForge project Privoxy to
+ rekindle development. There are now several active developers
+ contributing. The last stable release was v2.0.2, which has now grown
whiskers ;-).
_________________________________________________________________
7. See also
- [46]http://sourceforge.net/projects/ijbswa
+ [63]http://sourceforge.net/projects/ijbswa
- [47]http://ijbswa.sourceforge.net/
+ [64]http://ijbswa.sourceforge.net/
- [48]http://i.j.b/
+ [65]http://i.j.b/
- [49]http://www.junkbusters.com/ht/en/cookies.html
+ [66]http://www.junkbusters.com/ht/en/cookies.html
- [50]http://www.waldherr.org/junkbuster/
+ [67]http://www.waldherr.org/junkbuster/
- [51]http://privacy.net/analyze/
+ [68]http://privacy.net/analyze/
- [52]http://www.squid-cache.org/
+ [69]http://www.squid-cache.org/
_________________________________________________________________
8. Appendix
8.1. Regular Expressions
- Junkbuster can use "regular expressions" in various config files.
+ Privoxy can use "regular expressions" in various config files.
Assuming support for "pcre" (Perl Compatible Regular Expressions) is
compiled in, which is the default. Such configuration directives do
not require regular expressions, but they can be used to increase
"string1" is replaced by "string2" in this example.
These are just some of the ones you are likely to use when matching
- URLs with Junkbuster, and is a long way from a definitive list. This
- is enough to get us started with a few simple examples which may be
- more illuminating:
+ URLs with Privoxy, and is a long way from a definitive list. This is
+ enough to get us started with a few simple examples which may be more
+ illuminating:
/.*/banners/.* - A simple example that uses the common combination of
"." and "*" to denote any character, zero or more times. In other
break it ;-).
We are barely scratching the surface of regular expressions here so
- that you can understand the default Junkbuster configuration files,
- and maybe use this knowledge to customize your own installation. There
- is much, much more that can be done with regular expressions. Now that
+ that you can understand the default Privoxy configuration files, and
+ maybe use this knowledge to customize your own installation. There is
+ much, much more that can be done with regular expressions. Now that
you know enough to get started, you can learn more on your own :/
More reading on Perl Compatible Regular expressions:
- [53]http://www.perldoc.com/perl5.6/pod/perlre.html
+ [70]http://www.perldoc.com/perl5.6/pod/perlre.html
+ _________________________________________________________________
+
+8.2. Privoxy's Internal Pages
+
+ Since Privoxy proxies each requested web page, it is easy for Privoxy
+ to trap certain URLs. In this way, we can talk directly to Privoxy,
+ and see how it is configured, see how our rules are being applied,
+ change these rules and other configuration options, and even turn
+ Privoxy's filtering off, all with a web browser.
+
+ The URLs listed below are the special ones that allow direct access to
+ Privoxy. Of course, Privoxy must be running to access these. If not,
+ you will get a friendly error message. Internet access is not
+ necessary either.
+
+ * Privoxy main page:
+
+ [71]http://ijbswa.sourceforge.net/config/
+ Alternately, this may be reached at [72]http://i.j.b/, but this
+ variation may not work as reliably as the above in some
+ configurations.
+ * Show information about the current configuration:
+
+ [73]http://ijbswa.sourceforge.net/config/show-status
+ * Show the source code version numbers:
+
+ [74]http://ijbswa.sourceforge.net/config/show-version
+ * Show the client's request headers:
+
+ [75]http://ijbswa.sourceforge.net/config/show-request
+ * Show which actions apply to a URL and why:
+
+ [76]http://ijbswa.sourceforge.net/config/show-url-info
+ * Toggle Privoxy on or off:
+
+ [77]http://ijbswa.sourceforge.net/config/toggle
+ Short cuts. Turn off, then on:
+
+ [78]http://ijbswa.sourceforge.net/config/toggle?set=disable
+
+ [79]http://ijbswa.sourceforge.net/config/toggle?set=enable
+ * Edit the actions list file:
+
+ [80]http://ijbswa.sourceforge.net/config/edit-actions
+
+ These may be bookmarked for quick reference.
+ _________________________________________________________________
+
+8.3. Anatomy of an Action
+
+ The way Privoxy applies "actions" to any given URL can be complex, and
+ not always so easy to understand what is happening. And sometimes we
+ need to be able to see just what Privoxy is doing. Especially, if
+ something Privoxy is doing is causing us a problem inadvertantly. It
+ can be a little daunting to look at the actions files themselves,
+ since they tend to be filled with "regular expressions" whose
+ consequences are not always so obvious. Privoxy provides the
+ [81]http://ijbswa.sourceforge.net/config/show-url-info page that can
+ show us very specifically how actions are being applied to any given
+ URL. This is a big help for troubleshooting.
+
+ First, enter one URL (or partial URL) at the prompt, and then Privoxy
+ will tell us how current configuration will handle it. This will not
+ help with filtering effects from the default.filter! It also will not
+ tell you about any other URLs that may be embedded within the URL you
+ are testing. For instance, images such as ads are expressed as URLs
+ within the raw page source of HTML pages. So you will only get info
+ for the actual URL that is pasted into the prompt area -- not any
+ sub-URLs. If you want to know about embedded URLs like ads, you will
+ have to dig those out of the HTML source. Use your browser's "View
+ Page Source" option for this.
+
+ Let's look at an example, [82]google.com, one section at a time:
+
+ System default actions:
+
+ { -add-header -block -deanimate-gifs -downgrade -fast-redirects -filter
+ -hide-forwarded -hide-from -hide-referer -hide-user-agent -image
+ -image-blocker -limit-connect -no-compression -no-cookies-keep
+ -no-cookies-read -no-cookies-set -no-popups -vanilla-wafer -wafer }
+
+
+ This is the top section, and only tells us of the compiled in
+ defaults. This is basically what Privoxy would do if there were not
+ any "actions" defined, i.e. it does nothing. Every action is disabled.
+ This is not particularly informative for our purposes here. OK, next
+ section:
+
+ Matches for http://google.com:
+
+ { -add-header -block +deanimate-gifs -downgrade +fast-redirects
+ +filter{html-annoyances} +filter{js-annoyances} +filter{no-popups}
+ +filter{webbugs} +filter{nimda} +filter{banners-by-size} +filter{hal}
+ +filter{fun} +hide-forwarded +hide-from{block} +hide-referer{forge}
+ -hide-user-agent -image +image-blocker{blank} +no-compression
+ +no-cookies-keep -no-cookies-read -no-cookies-set +no-popups
+ -vanilla-wafer -wafer }
+ /
+
+ { -no-cookies-keep -no-cookies-read -no-cookies-set }
+ .google.com
+
+ { -fast-redirects }
+ .google.com
+
+
+ This is much more informative, and tells us how we have defined our
+ "actions", and which ones match for our example, "google.com". The
+ first grouping shows our default settings, which would apply to all
+ URLs. If you look at your "actions" file, this would be the section
+ just below the "aliases" section near the top. This applies to all
+ URLs as signified by the single forward slash -- "/".
+
+ These are the default actions we have enabled. But we can define
+ additional actions that would be exceptions to these general rules,
+ and then list specific URLs that these exceptions would apply to. Last
+ match wins. Just below this then are two explict matches for
+ ".google.com". The first is negating our various cookie blocking
+ actions (i.e. we will allow cookies here). The second is allowing
+ "fast-redirects". Note that there is a leading dot here --
+ ".google.com". This will match any hosts and sub-domains, in the
+ google.com domain also, such as "www.google.com". So, apparently, we
+ have these actions defined somewhere in the lower part of our actions
+ file, and "google.com" is referenced in these sections.
+
+ And now we pull it altogether in the bottom section and summarize how
+ Privoxy is appying all its "actions" to "google.com":
+
+ Final results:
+
+ -add-header -block -deanimate-gifs -downgrade -fast-redirects
+ +filter{html-annoyances} +filter{js-annoyances} +filter{no-popups}
+ +filter{webbugs} +filter{nimda} +filter{banners-by-size} +filter{hal}
+ +filter{fun} +hide-forwarded +hide-from{block} +hide-referer{forge}
+ -hide-user-agent -image +image-blocker{blank} -limit-connect +no-compression
+ -no-cookies-keep -no-cookies-read -no-cookies-set +no-popups -vanilla-wafer
+ -wafer
+
+
+ Now another example, "ad.doubleclick.net":
+
+ { +block +image }
+ .ad.doubleclick.net
+
+ { +block +image }
+ ad*.
+
+ { +block +image }
+ .doubleclick.net
+
+
+ We'll just show the interesting part here, the explicit matches. It is
+ matched three different times. Each as an "+block +image", which is
+ the expanded form of one of our aliases that had been defined as:
+ "+imageblock". ("Aliases" are defined in the first section of the
+ actions file and typically used to combine more than one action.)
+
+ Any one of these would have done the trick and blocked this as an
+ unwanted image. This is unnecessarily redundant since the last case
+ effectively would also cover the first. No point in taking chances
+ with these guys though ;-) Note that if you want an ad or obnoxious
+ URL to be invisible, it should be defined as "ad.doubleclick.net" is
+ done here -- as both a "+block" and an "+image". The custom alias
+ "+imageblock" does this for us.
+
+ One last example. Let's try "http://www.rhapsodyk.net/adsl/HOWTO/".
+ This one is giving us problems. We are getting a blank page. Hmmm...
+
+ Matches for http://www.rhapsodyk.net/adsl/HOWTO/:
+
+ { -add-header -block +deanimate-gifs -downgrade +fast-redirects
+ +filter{html-annoyances} +filter{js-annoyances} +filter{no-popups}
+ +filter{webbugs} +filter{nimda} +filter{banners-by-size} +filter{hal}
+ +filter{fun} +hide-forwarded +hide-from{block} +hide-referer{forge}
+ -hide-user-agent -image +image-blocker{blank} +no-compression
+ +no-cookies-keep -no-cookies-read -no-cookies-set +no-popups
+ -vanilla-wafer -wafer }
+ /
+
+ { +block +image }
+ /ads
+
+
+ Ooops, the "/adsl/" is matching "/ads"! But we did not want this at
+ all! Now we see why we get the blank page. We could now add a new
+ action below this that explictly does not block (-block) pages with
+ "adsl". There are various ways to handle such exceptions. Example:
+
+ { -block }
+ /adsl
+
+
+ Now the page displays ;-)
References
+ Visible links
1. http://ijbswa.sourceforge.net/user-manual/
- 2. mailto:ijbswa-developers@lists.sourceforge.net
- 3. file://localhost/home/swa/sf/current/doc/source/tmp.html#INTRODUCTION
- 4. file://localhost/home/swa/sf/current/doc/source/tmp.html#AEN27
- 5. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION
- 6. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-SOURCE
- 7. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-RH
- 8. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-SUSE
- 9. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-OS2
- 10. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-WIN
- 11. file://localhost/home/swa/sf/current/doc/source/tmp.html#INSTALLATION-OTHER
- 12. file://localhost/home/swa/sf/current/doc/source/tmp.html#CONFIGURATION
- 13. file://localhost/home/swa/sf/current/doc/source/tmp.html#AEN172
- 14. file://localhost/home/swa/sf/current/doc/source/tmp.html#ACTIONSFILE
- 15. file://localhost/home/swa/sf/current/doc/source/tmp.html#FILTERFILE
- 16. file://localhost/home/swa/sf/current/doc/source/tmp.html#AEN1130
- 17. file://localhost/home/swa/sf/current/doc/source/tmp.html#QUICKSTART
- 18. file://localhost/home/swa/sf/current/doc/source/tmp.html#CONTACT
- 19. file://localhost/home/swa/sf/current/doc/source/tmp.html#COPYRIGHT
- 20. file://localhost/home/swa/sf/current/doc/source/tmp.html#AEN1195
- 21. file://localhost/home/swa/sf/current/doc/source/tmp.html#AEN1201
- 22. file://localhost/home/swa/sf/current/doc/source/tmp.html#SEEALSO
- 23. file://localhost/home/swa/sf/current/doc/source/tmp.html#APPENDIX
- 24. file://localhost/home/swa/sf/current/doc/source/tmp.html#REGEX
- 25. http://i.j.b/
- 26. http://sourceforge.net/projects/ijbswa/
- 27. http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/current/
- 28. http://www.gnu.org/
- 29. http://i.j.b/
- 30. file://localhost/home/swa/sf/current/doc/source/tmp.html#ACTIONSFILE
- 31. http://i.j.b/
- 32. http://i.j.b/
- 33. http://i.j.b/
- 34. http://i.j.b/show-url-info
- 35. http://i.j.b/
- 36. http://www.perldoc.com/perl5.6/pod/perlre.html
- 37. file://localhost/home/swa/sf/current/doc/source/tmp.html#REGEX
- 38. http://i.j.b/
- 39. http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
- 40. http://sourceforge.net/mail/?group_id=11118
- 41. http://sourceforge.net/tracker/?group_id=11118&atid=111118
- 42. http://www.gnu.org/copyleft/gpl.html
- 43. http://www.junkbusters.com/ht/en/ijbfaq.html
- 44. http://www.waldherr.org/junkbuster/
- 45. http://sourceforge.net/projects/ijbswa/
- 46. http://sourceforge.net/projects/ijbswa
- 47. http://ijbswa.sourceforge.net/
+ 2. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INTRODUCTION
+ 3. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN28
+ 4. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION
+ 5. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-SOURCE
+ 6. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-RH
+ 7. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-SUSE
+ 8. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-OS2
+ 9. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-WIN
+ 10. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INSTALLATION-OTHER
+ 11. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#CONFIGURATION
+ 12. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN147
+ 13. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN165
+ 14. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN196
+ 15. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN229
+ 16. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN322
+ 17. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN459
+ 18. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN547
+ 19. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN656
+ 20. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#ACTIONSFILE
+ 21. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN754
+ 22. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN828
+ 23. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1148
+ 24. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#FILTERFILE
+ 25. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1207
+ 26. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#QUICKSTART
+ 27. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1263
+ 28. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#CONTACT
+ 29. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#COPYRIGHT
+ 30. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1322
+ 31. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1328
+ 32. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#SEEALSO
+ 33. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#APPENDIX
+ 34. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#REGEX
+ 35. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1512
+ 36. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#ACTIONSANAT
+ 37. http://i.j.b/
+ 38. http://sourceforge.net/projects/ijbswa/
+ 39. http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/current/
+ 40. http://www.gnu.org/
+ 41. http://i.j.b/
+ 42. http://ijbswa.sourceforge.net/config/
+ 43. http://i.j.b/
+ 44. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#ACTIONSFILE
+ 45. http://i.j.b/
+ 46. http://i.j.b/
+ 47. http://i.j.b/
48. http://i.j.b/
- 49. http://www.junkbusters.com/ht/en/cookies.html
- 50. http://www.waldherr.org/junkbuster/
- 51. http://privacy.net/analyze/
- 52. http://www.squid-cache.org/
- 53. http://www.perldoc.com/perl5.6/pod/perlre.html
+ 49. http://i.j.b/show-url-info
+ 50. http://www.perldoc.com/perl5.6/pod/perlre.html
+ 51. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#REGEX
+ 52. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#ACTIONSANAT
+ 53. http://i.j.b/
+ 54. http://sourceforge.net/tracker/?group_id=11118&atid=211118
+ 55. http://sourceforge.net/tracker/?group_id=11118&atid=111118
+ 56. http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
+ 57. http://sourceforge.net/mail/?group_id=11118
+ 58. http://sourceforge.net/mail/?group_id=11118
+ 59. http://www.gnu.org/copyleft/gpl.html
+ 60. http://www.junkbusters.com/ht/en/ijbfaq.html
+ 61. http://www.waldherr.org/junkbuster/
+ 62. http://sourceforge.net/projects/ijbswa/
+ 63. http://sourceforge.net/projects/ijbswa
+ 64. http://ijbswa.sourceforge.net/
+ 65. http://i.j.b/
+ 66. http://www.junkbusters.com/ht/en/cookies.html
+ 67. http://www.waldherr.org/junkbuster/
+ 68. http://privacy.net/analyze/
+ 69. http://www.squid-cache.org/
+ 70. http://www.perldoc.com/perl5.6/pod/perlre.html
+ 71. http://ijbswa.sourceforge.net/config/
+ 72. http://i.j.b/
+ 73. http://ijbswa.sourceforge.net/config/show-status
+ 74. http://ijbswa.sourceforge.net/config/show-version
+ 75. http://ijbswa.sourceforge.net/config/show-request
+ 76. http://ijbswa.sourceforge.net/config/show-url-info
+ 77. http://ijbswa.sourceforge.net/config/toggle
+ 78. http://ijbswa.sourceforge.net/config/toggle?set=disable
+ 79. http://ijbswa.sourceforge.net/config/toggle?set=enable
+ 80. http://ijbswa.sourceforge.net/config/edit-actions
+ 81. http://ijbswa.sourceforge.net/config/show-url-info
+ 82. http://google.com/
+
+ Hidden links:
+ 83. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1384
+ 84. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1392
+ 85. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1395
+ 86. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1398
+ 87. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1401
+ 88. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1406
+ 89. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1409
+ 90. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1412
+ 91. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#AEN1418
projects / privoxy.git / blobdiff