Purpose : Used with other docs and files only.
- $Id: p-config.sgml,v 2.38 2009/02/09 16:49:47 fabiankeil Exp $
+ $Id: p-config.sgml,v 2.52 2009/06/03 18:30:18 fabiankeil Exp $
Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
See LICENSE.
<para>
The main config file controls all aspects of <application>Privoxy</application>'s
operation that are not location dependent (i.e. they apply universally, no matter
- where you may be surfing).
+ where you may be surfing). Like the filter and action files, the config file is
+ a plain text file and can be modified with a text editor like emacs, vim or
+ notepad.exe.
</para>
]]>
Sample Configuration File for Privoxy v&p-version;
</title>
<para>
- $Id: p-config.sgml,v 2.38 2009/02/09 16:49:47 fabiankeil Exp $
+ $Id: p-config.sgml,v 2.52 2009/06/03 18:30:18 fabiankeil Exp $
</para>
<para>
Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
</para>
<para>
A debug level of 1 is informative because it will show you each request
- as it happens. <emphasis>1, 4096 and 8192 are recommended</emphasis>
+ as it happens. <emphasis>1, 1024, 4096 and 8192 are recommended</emphasis>
so that you will notice when things go wrong. The other levels are
probably only of interest if you are hunting down a specific problem.
They can produce a hell of an output (especially 16).
<term>Effect if unset:</term>
<listitem>
<para>
- Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for
- home users who run <application>Privoxy</application> on the same machine as
- their browser.
+ Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is suitable and
+ recommended for home users who run <application>Privoxy</application> on
+ the same machine as their browser.
</para>
</listitem>
</varlistentry>
serve requests from other machines (e.g. on your local network) as well, you
will need to override the default.
</para>
+ <para>
+ IPv6 addresses containing colons have to be quoted by brackets.
+ </para>
<para>
If you leave out the IP address, <application>Privoxy</application> will
- bind to all interfaces (addresses) on your machine and may become reachable
+ bind to all IPv4 interfaces (addresses) on your machine and may become reachable
from the Internet. In that case, consider using <link
linkend="acls">access control lists</link> (ACL's, see below), and/or
- a firewall.
+ a firewall. If the hostname is localhost, <application>Privoxy</application>
+ will explicitly try to bind to an IPv4 address. For other hostnames it depends
+ on the operating system which IP version will be used.
</para>
<para>
If you open <application>Privoxy</application> to untrusted users, you will
<para>
<programlisting>
listen-address 192.168.0.1:8118
+</programlisting>
+ </para>
+ <para>
+ Suppose you are running <application>Privoxy</application> on an
+ IPv6-capable machine and you want it to listen on the IPv6 address
+ of the loopback device:
+ </para>
+ <para>
+ <programlisting>
+ listen-address [::1]:8118
</programlisting>
</para>
</listitem>
<term>Type of value:</term>
<listitem>
<para>
- <replaceable class="parameter">src_addr</replaceable>[/<replaceable class="parameter">src_masklen</replaceable>]
- [<replaceable class="parameter">dst_addr</replaceable>[/<replaceable class="parameter">dst_masklen</replaceable>]]
+ <replaceable class="parameter">src_addr</replaceable>[:<replaceable class="parameter">port</replaceable>][/<replaceable class="parameter">src_masklen</replaceable>]
+ [<replaceable class="parameter">dst_addr</replaceable>[:<replaceable class="parameter">port</replaceable>][/<replaceable class="parameter">dst_masklen</replaceable>]]
</para>
<para>
Where <replaceable class="parameter">src_addr</replaceable> and
- <replaceable class="parameter">dst_addr</replaceable> are IP addresses in dotted decimal notation or valid
- DNS names, and <replaceable class="parameter">src_masklen</replaceable> and
+ <replaceable class="parameter">dst_addr</replaceable> are IPv4 addresses in dotted decimal notation or valid
+ DNS names, <replaceable class="parameter">port</replaceable> is a port
+ number, and <replaceable class="parameter">src_masklen</replaceable> and
<replaceable class="parameter">dst_masklen</replaceable> are subnet masks in CIDR notation, i.e. integer
values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole
destination part are optional.
</para>
+ <para>
+ If your system implements
+ <ulink url="http://tools.ietf.org/html/rfc3493">RFC 3493</ulink>, then
+ <replaceable class="parameter">src_addr</replaceable> and <replaceable
+ class="parameter">dst_addr</replaceable> can be IPv6 addresses delimeted by
+ brackets, <replaceable class="parameter">port</replaceable> can be a number
+ or a service name, and
+ <replaceable class="parameter">src_masklen</replaceable> and
+ <replaceable class="parameter">dst_masklen</replaceable> can be a number
+ from 0 to 128.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
<term>Default value:</term>
<listitem>
<para><emphasis>Unset</emphasis></para>
+ <para>
+ If no <replaceable class="parameter">port</replaceable> is specified,
+ any port will match. If no <replaceable class="parameter">src_masklen</replaceable> or
+ <replaceable class="parameter">src_masklen</replaceable> is given, the complete IP
+ address has to match (i.e. 32 bits for IPv4 and 128 bits for IPv6).
+ </para>
</listitem>
</varlistentry>
<varlistentry>
like <quote>*.org</quote> or partial domain names. If a DNS name resolves to multiple
IP addresses, only the first one is used.
</para>
+ <para>
+ Some systems allows IPv4 client to connect to IPv6 server socket.
+ Then the client's IPv4 address will be translated by system into
+ IPv6 address space with special prefix ::ffff:0:0/96 (so called IPv4
+ mapped IPv6 address). <application>Privoxy</application> can handle it
+ and maps such ACL addresses automatically.
+ </para>
<para>
Denying access to particular sites by ACL may have undesired side effects
if the site in question is hosted on a machine which also hosts other sites
deny-access 192.168.45.73 www.dirty-stuff.example.com
</screen>
</para>
+ <para>
+ Allow access from the IPv4 network 192.0.2.0/24 even if listening on
+ an IPv6 wild card address (not supported on all platforms):
+ </para>
+ <para>
+ <programlisting>
+ permit-access 192.0.2.0/24
+</programlisting>
+ </para>
+ <para>
+ This is equivalent to the following line even if listening on an
+ IPv4 address (not supported on all platforms):
+ </para>
+ <para>
+ <programlisting>
+ permit-access [::ffff:192.0.2.0]/120
+</programlisting>
+ </para>
</listitem>
</varlistentry>
</variablelist>
denote <quote>all URLs</quote>.
<replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>]
is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded,
- optionally followed by its listening port (default: 8080).
+ optionally followed by its listening port (default: 8000).
Use a single dot (<literal>.</literal>) to denote <quote>no forwarding</quote>.
</para>
</listitem>
If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not
forwarded to another HTTP proxy but are made directly to the web servers.
</para>
+ <para>
+ <replaceable class="parameter">http_parent</replaceable> can be a
+ numerical IPv6 address (if
+ <ulink url="http://tools.ietf.org/html/rfc3493">RFC 3493</ulink> is
+ implemented). To prevent clashes with the port delimiter, the whole IP
+ address has to be put into brackets. On the other hand a <replaceable
+ class="parameter">target_pattern</replaceable> containing an IPv6 address
+ has to be put into angle brackets (normal brackets are reserved for
+ regular expressions already).
+ </para>
<para>
Multiple lines are OK, they are checked in sequence, and the last match wins.
</para>
forward .isp.example.net .
</screen>
</para>
+ <para>
+ Parent proxy specified by an IPv6 address:
+ </para>
+ <para>
+ <programlisting>
+ foward / [2001:DB8::1]:8000
+</programlisting>
+ </para>
+ <para>
+ Suppose your parent proxy doesn't support IPv6:
+ </para>
+ <para>
+ <programlisting>
+ forward / parent-proxy.example.org:8000
+ forward ipv6-server.example.org .
+ forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> .
+</programlisting>
+ </para>
</listitem>
</varlistentry>
</variablelist>
<para>
With <literal>forward-socks5</literal> the DNS resolution will happen on the remote server as well.
</para>
+ <para>
+ <replaceable class="parameter">socks_proxy</replaceable> and
+ <replaceable class="parameter">http_parent</replaceable> can be a
+ numerical IPv6 address (if
+ <ulink url="http://tools.ietf.org/html/rfc3493">RFC 3493</ulink> is
+ implemented). To prevent clashes with the port delimiter, the whole IP
+ address has to be put into brackets. On the other hand a <replaceable
+ class="parameter">target_pattern</replaceable> containing an IPv6 address
+ has to be put into angle brackets (normal brackets are reserved for
+ regular expressions already).
+ </para>
<para>
If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not
forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through
</para>
<para>
<screen>
- forward-socks4a / 127.0.0.1:9050 .
+ forward-socks5 / 127.0.0.1:9050 .
</screen>
</para>
<![%config-file;[<literallayout>@@forwarded-connect-retries 0</literallayout>]]>
</sect3>
+</sect2>
+
+<sect2 id="misc">
+<title>Miscellaneous</title>
+
<sect3 renderas="sect4" id="accept-intercepted-requests"><title>accept-intercepted-requests</title>
<variablelist>
<varlistentry>
<term>Effect if unset:</term>
<listitem>
<para>
- Connections are not reused.
+ Connections are not kept alive.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Notes:</term>
<listitem>
+ <para>
+ This option allows clients to keep the connection to &my-app;
+ alive. If the server supports it, &my-app; will keep
+ the connection to the server alive as well. Under certain
+ circumstances this may result in speed-ups.
+ </para>
+ <para>
+ By default, &my-app; will close the connection to the server if
+ the client connection gets closed, or if the specified timeout
+ has been reached without a new request coming in. This behaviour
+ can be changed with the <ulink
+ url="#CONNECTION-SHARING">connection-sharing</ulink> option.
+ </para>
<para>
This option has no effect if <application>Privoxy</application>
has been compiled without keep-alive support.
</sect3>
+<sect3 renderas="sect4" id="connection-sharing"><title>connection-sharing</title>
+<variablelist>
+ <varlistentry>
+ <term>Specifies:</term>
+ <listitem>
+ <para>
+ Whether or not outgoing connections that have been kept alive
+ should be shared between different incoming connections.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Type of value:</term>
+ <listitem>
+ <para>
+ <replaceable>0 or 1</replaceable>
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Default value:</term>
+ <listitem>
+ <para>None</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Effect if unset:</term>
+ <listitem>
+ <para>
+ Connections are not shared.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ This option has no effect if <application>Privoxy</application>
+ has been compiled without keep-alive support, or if it's disabled.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ Note that reusing connections doesn't necessary cause speedups.
+ There are also a few privacy implications you should be aware of.
+ </para>
+ <para>
+ If this option is effective, outgoing connections are shared between
+ clients (if there are more than one) and closing the browser that initiated
+ the outgoing connection does no longer affect the connection between &my-app;
+ and the server unless the client's request hasn't been completed yet.
+ </para>
+ <para>
+ If the outgoing connection is idle, it will not be closed until either
+ <application>Privoxy's</application> or the server's timeout is reached.
+ While it's open, the server knows that the system running &my-app; is still
+ there.
+ </para>
+ <para>
+ If there are more than one client (maybe even belonging to multiple users),
+ they will be able to reuse each others connections. This is potentially
+ dangerous in case of authentication schemes like NTLM where only the
+ connection is authenticated, instead of requiring authentication for
+ each request.
+ </para>
+ <para>
+ If there is only a single client, and if said client can keep connections
+ alive on its own, enabling this option has next to no effect. If the client
+ doesn't support connection keep-alive, enabling this option may make sense
+ as it allows &my-app; to keep outgoing connections alive even if the client
+ itself doesn't support it.
+ </para>
+ <para>
+ You should also be aware that enabling this option increases the likelihood
+ of getting the "No server or forwarder data" error message, especially if you
+ are using a slow connection to the Internet.
+ </para>
+ <para>
+ This option should only be used by experienced users who
+ understand the risks and can weight them against the benefits.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Examples:</term>
+ <listitem>
+ <para>
+ connection-sharing 1
+ </para>
+ </listitem>
+ </varlistentry>
+</variablelist>
+<![%config-file;[<literallayout>@@#connection-sharing 1</literallayout>]]>
+</sect3>
+
+
<sect3 renderas="sect4" id="socket-timeout"><title>socket-timeout</title>
<variablelist>
<varlistentry>
<term>Effect if unset:</term>
<listitem>
<para>
- A default value of 180 seconds is used.
+ A default value of 300 seconds is used.
</para>
</listitem>
</varlistentry>
<term>Examples:</term>
<listitem>
<para>
- socket-timeout 180
+ socket-timeout 300
+ </para>
+ </listitem>
+ </varlistentry>
+</variablelist>
+<![%config-file;[<literallayout>@@socket-timeout 300</literallayout>]]>
+</sect3>
+
+
+<sect3 renderas="sect4" id="max-client-connections"><title>max-client-connections</title>
+<variablelist>
+ <varlistentry>
+ <term>Specifies:</term>
+ <listitem>
+ <para>
+ Maximum number of client connections that will be served.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Type of value:</term>
+ <listitem>
+ <para>
+ <replaceable>Positive number.</replaceable>
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Default value:</term>
+ <listitem>
+ <para>None</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Effect if unset:</term>
+ <listitem>
+ <para>
+ Connections are served until a resource limit is reached.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ &my-app; creates one thread (or process) for every incoming client
+ connection that isn't rejected based on the access control settings.
+ </para>
+ <para>
+ If the system is powerful enough, &my-app; can theoretically deal with
+ several hundred (or thousand) connections at the same time, but some
+ operating systems enforce resource limits by shutting down offending
+ processes and their default limits may be below the ones &my-app; would
+ require under heavy load.
+ </para>
+ <para>
+ Configuring &my-app; to enforce a connection limit below the thread
+ or process limit used by the operating system makes sure this doesn't
+ happen. Simply increasing the operating system's limit would work too,
+ but if &my-app; isn't the only application running on the system,
+ you may actually want to limit the resources used by &my-app;.
+ </para>
+ <para>
+ If &my-app; is only used by a single trusted user, limiting the
+ number of client connections is probably unnecessary. If there
+ are multiple possibly untrusted users you probably still want to
+ additionally use a packet filter to limit the maximal number of
+ incoming connections per client. Otherwise a malicious user could
+ intentionally create a high number of connections to prevent other
+ users from using &my-app;.
+ </para>
+ <para>
+ Obviously using this option only makes sense if you choose a limit
+ below the one enforced by the operating system.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Examples:</term>
+ <listitem>
+ <para>
+ max-client-connections 256
</para>
</listitem>
</varlistentry>
</variablelist>
-<![%config-file;[<literallayout>@@socket-timeout 180</literallayout>]]>
+<![%config-file;[<literallayout>@@#max-client-connections 256</literallayout>]]>
</sect3>