-<!DOCTYPE Article PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
+<!entity % dummy "INCLUDE">
+<!entity supported SYSTEM "supported.sgml">
+<!entity newfeatures SYSTEM "newfeatures.sgml">
+<!entity p-intro SYSTEM "privoxy.sgml">
+]>
<!--
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
File : $Source: /cvsroot/ijbswa/current/doc/source/developer-manual.sgml,v $
Purpose : developer manual
This file belongs into
ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- $Id: developer-manual.sgml,v 1.2 2001/09/13 15:20:17 swa Exp $
+ $Id: developer-manual.sgml,v 1.18 2002/04/03 03:51:48 hal9 Exp $
Written by and Copyright (C) 2001 the SourceForge
- IJBSWA team. http://ijbswa.sourceforge.net
+ Privoxy team. http://www.privoxy.org/
Based on the Internet Junkbuster originally written
by and Copyright (C) 1997 Anonymous Coders and
<article id="index">
<artheader>
- <title>Junkbuster Developer Manual</title>
+ <title>Privoxy Developer Manual</title>
- <pubdate>$Id: developer-manual.sgml,v 1.2 2001/09/13 15:20:17 swa Exp $</pubdate>
+ <pubdate>$Id: developer-manual.sgml,v 1.18 2002/04/03 03:51:48 hal9 Exp $</pubdate>
<authorgroup>
<author>
- <affiliation>
- <orgname>By: Junkbuster Developers</orgname>
- </affiliation>
+ <affiliation>
+ <orgname>By: Privoxy Developers</orgname>
+ </affiliation>
</author>
</authorgroup>
<abstract>
- <para>
- The developer manual gives the users information on how to help the developer
-team. It provides guidance on coding, testing, documentation and other
-issues. The Internet Junkbuster is an application
-that provides privacy and security to the user of the world wide web.
+<![%dummy;[
+ <para>
+ <comment>
+ This is here to keep vim syntax file from breaking :/
+ If I knew enough to fix it, I would.
+ PLEASE DO NOT REMOVE! HB: hal@foobox.net
+ </comment>
</para>
- <para>
-You can find the latest version of the user manual at <ulink
-url="http://ijbswa.sourceforge.net/doc/developer-manual/">http://ijbswa.sourceforge.net/doc/developer-manual/</ulink>.
-Please see the Contact section in the user-manual if you want to contact the developers.
+ ]]>
+<para>
+ The developer manual gives the users information on how to help the developer
+ team. It provides guidance on coding, testing, documentation and other
+ issues.
</para>
+<!--
+ Include privoxy.sgml:
+-->
+&p-intro;
+
+<para>
+ You can find the latest version of the this manual at <ulink
+ url="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/</ulink>.
+ Please see the Contact section of the <ulink
+ url="../user-manual/contact.html">User Manual</ulink> on how to contact the
+ developers.
+</para>
+
+<!-- <para> -->
+<!-- Feel free to send a note to the developers at <email>ijbswa-developers@lists.sourceforge.net</email>. -->
+<!-- </para> -->
- <para>
- Feel free to send a note to the developers at <email>ijbswa-developers@lists.sourceforge.net</email>.
- </para>
</abstract>
</artheader>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="introduction"><title>Introduction</title>
- <para>To be filled.
-</para>
+<!--
+
+ I don't like seeing blank space :) So added *something* here.
+
+ -->
+ <para>
+ <application>Privoxy</application>, as an heir to
+ <application>Junkbuster</application>, is an Open Source project
+ and licensed under the GPL. As such, <application>Privoxy</application>
+ development is potentially open to anyone who has the time, knowledge,
+ and desire to contribute in any capacity. Our goals are simply to
+ continue the mission, to improve <application>Privoxy</application>, and
+ to make it available to as wide an audience as possible.
+ </para>
+ <para>
+ One does not have to be a programmer to contribute. Packaging, testing,
+ and porting, are all important jobs as well.
+ </para>
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
- <sect1 id="quickstart"><title>Quickstart to Junkbuster Development</title>
- <para>To be filled.
+ <sect1 id="quickstart"><title>Quickstart to Privoxy Development</title>
+ <para>
+You'll need an account on <ulink
+url="http://sourceforge.net">Sourceforge</ulink> to support our development.
+Mail your ID to the list and wait until a project manager has added you.
</para>
- </sect1>
+<para>
+For the time being (read, this section is under construction), please note the
+following guidelines for changing stuff in the code. If it is
+ <orderedlist numeration="arabic">
+ <listitem><para>
+ A bugfix / clean-up / cosmetic thing: shoot
+ </para></listitem>
+ <listitem><para>
+ A new feature that can be turned off: shoot
+ </para></listitem>
+ <listitem><para>
+ A clear improvement w/o side effects on other parts of the code: shoot
+ </para></listitem>
+ <listitem><para>
+ A matter of taste: ask the list
+ </para></listitem>
+ <listitem><para>
+ A major redesign of some part of the code: ask the list
+ </para></listitem>
+ </orderedlist>
+ </para>
+</sect1>
+
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="documentation"><title>Documentation Guidelines</title>
<para>
-All docs should be ...
-<ItemizedList>
- <ListItem>
- <Para>in a format that is widely used. I propose HTML.
- </Para>
- </ListItem>
- <ListItem>
- <Para>we either
- <ItemizedList>
- <ListItem>
- <Para>generate man pages from the documentation (let's _NOT_
-write them manually), or</Para>
- </ListItem>
- <ListItem><Para>we have a man page that points to the
- documentation (I propose this option)
- </Para></ListItem>
- </ItemizedList></Para></ListItem>
- <ListItem><Para>have a consistent layout</Para></ListItem>
- <ListItem><Para>have a link to the latest version of the document (i.e. point to a URL at sf)</Para></ListItem>
- <ListItem><Para>be consistent with the redirect script (i.e. the junkbuster program
- points via the redirect URL at sf to valid end-points in the document)</Para></ListItem>
- <ListItem><Para>started from scratch but recycle parts from the original junkbuster documents</Para></ListItem>
- </ItemizedList>
+ All formal documents are maintained in docbook SGML and located
+ in the <computeroutput>doc/source</computeroutput> directory. You will
+ need <ulink url="http://www.docbook.org">docbook</ulink> and the
+ docbook stylesheets (or comparable alternatives), and either
+ <application>jade</application> or <application>openjade</application>
+ installed in order to build docs from source. Currently there is
+ <ulink
+ url="../user-manual/index.html"><citetitle>user-manual</citetitle></ulink>,
+ <ulink
+ url="../faq/index.html"><citetitle>FAQ</citetitle></ulink>,
+ and, of course this, the <citetitle>developer-manual</citetitle> in
+ this format.
+ </para>
+ <para>
+ Other, less formal documents (e.g. README, LICENSE) are
+ maintained as plain text files in the toplevel source
+ directory.
+ </para>
+ <para>
+ Packagers are encouraged to include this documentation. For those
+ without the ability to build the docs locally, text versions of
+ each are kept in CVS. Or HTML versions can be downloaded from the <ulink
+ url="http://www.privoxy.org">www.privoxy.org</ulink> website, which
+ should be fairly current.
+ </para>
+ <para>
+ Formal documents are built with the Makefile targets of
+ <computeroutput>make dok</computeroutput>, or alternately
+ <computeroutput>make redhat-dok</computeroutput>. If you
+ have problems, try both. The build process uses the document
+ SGML sources in <computeroutput>doc/source</computeroutput> to
+ update all text files in <computeroutput>doc/text</computeroutput>
+ and to update all HTML documents in
+ <computeroutput>doc/webserver</computeroutput>.
+ </para>
+ <para>
+ Documentation writers should please make sure documents build
+ successfully before committing to CVS.
+ </para>
+ <para>
+ How do you update the webserver (i.e. the pages on privoxy.org)?
+ <orderedlist numeration="arabic">
+ <listitem><para>
+ First, build the docs by running <computeroutput>make
+ dok</computeroutput> (or alternately <computeroutput>make
+ redhat-dok</computeroutput>).
+ </para></listitem>
+ <listitem><para>
+ Run <computeroutput>make webserver</computeroutput> which copies all files from
+<computeroutput>doc/webserver</computeroutput> to the sourceforge webserver
+via scp.
+ </para></listitem>
+ </orderedlist>
</para>
- </sect1>
+ </sect1>
+
+<!-- <listitem><para>be consistent with the redirect script (i.e. the <application>Privoxy</application> program -->
+<!-- points via the redirect URL at sf to valid end-points in the document)</para></listitem> -->
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="coding"><title>Coding Guidelines</title>
<sect2 id="s1"><title>Introduction</title>
- <para>This set of standards is designed to make our lives easier.
- It is developed with the simple goal of helping us keep the
- "new and improved Junkbusters" consistent and reliable. Thus
- making maintenance easier and increasing chances of success of
- the project.</para>
+ <para>This set of standards is designed to make our lives easier. It is
+ developed with the simple goal of helping us keep the "new and improved
+ <application>Privoxy</application>" consistent and reliable. Thus making
+ maintenance easier and increasing chances of success of the
+ project.</para>
- <para>And that of course comes back to us as individuals. If we
- can increase our development and product efficiencies then we
- can solve more of the request for changes/improvements and in
- general feel good about ourselves. ;-></para>
+ <para>And that of course comes back to us as individuals. If we can
+ increase our development and product efficiencies then we can solve more
+ of the request for changes/improvements and in general feel good about
+ ourselves. ;-></para>
</sect2>
<sect3 id="s3"><title>Comment, Comment, Comment</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Comment as much as possible without commenting the obvious.
For example do not comment "aVariable is equal to bVariable".
If the comment describes something different than what the code
is doing then maybe a programming error is occurring.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
/* if page size greater than 1k ... */
if ( PageLength() > 1024 )
<sect3 id="s4"><title>Use blocks for comments</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Comments can help or they can clutter. They help when they
are differentiated from the code they describe. One line
and the code. Block identifiers do, by surrounding the code
with a clear, definable pattern.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
/*********************************************************************
* This will stand out clearly in your code!
DoSomethingVeryImportant();
}</programlisting>
- <para><emphasis>Exception:</></para>
+ <para><emphasis>Exception:</emphasis></para>
<para>If you are trying to add a small logic comment and do not
wish to "disrubt" the flow of the code, feel free to use a 1
<sect3 id="s5"><title>Keep Comments on their own line</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>It goes back to the question of readability. If the comment
is on the same line as the code it will be harder to read than
at the end of closing braces, when used to comment
parameters.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
/*********************************************************************
* This will stand out clearly in your code,
short DoSomethingVeryImportant(
- short firstParam, /* represents something */
- short nextParam /* represents something else */ )
+ short firstparam, /* represents something */
+ short nextparam /* represents something else */ )
{
...code here...
<sect3 id="s6"><title>Comment each logical step</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Logical steps should be commented to help others follow the
intent of the written code and comments will make the code more
<sect3 id="s7"><title>Comment All Functions Thoroughly</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>A reader of the code should be able to look at the comments
just prior to the beginning of a function and discern the
<sect3 id="s8"><title>Comment at the end of braces if the
content is more than one screen length</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Each closing brace should be followed on the same line by a
comment that describes the origination of the brace if the
<para>use following a closing brace: } /* -END- if() or while ()
or etc... */</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
if ( 1 == X )
{
<sect3 id="s10"><title>Variable Names</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Use all lowercase, and seperate words via an underscore
('_'). Do not start an identifier with an underscore. (ANSI C
reserves these for use by the compiler and system headers.) Do
not use identifiers which are reserved in ANSI C++. (E.g.
template, class, true, false, ...). This is in case we ever
- decide to port JunkBuster to C++.</para>
+ decide to port Privoxy to C++.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
int ms_iis5_hack = 0;</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>
<programlisting>
<sect3 id="s11"><title>Function Names</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Use all lowercase, and seperate words via an underscore
('_'). Do not start an identifier with an underscore. (ANSI C
reserves these for use by the compiler and system headers.) Do
not use identifiers which are reserved in ANSI C++. (E.g.
template, class, true, false, ...). This is in case we ever
- decide to port JunkBuster to C++.</para>
+ decide to port Privoxy to C++.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
int load_some_file( struct client_state *csp )</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>
<programlisting>
<sect3 id="s12"><title>Header file prototypes</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Use a descriptive parameter name in the function prototype
in header files. Use the same parameter name in the header file
that you use in the c file.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
(.h) extern int load_aclfile( struct client_state *csp );
(.c) int load_aclfile( struct client_state *csp )</programlisting>
- <para><emphasis>Instead of:</>
+ <para><emphasis>Instead of:</emphasis>
<programlisting>
(.h) extern int load_aclfile( struct client_state * ); or
(.h) extern int load_aclfile();
<sect3 id="s13"><title>Enumerations, and #defines</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Use all capital letters, with underscores between words. Do
not start an identifier with an underscore. (ANSI C reserves
these for use by the compiler and system headers.)</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
(enumeration) : enum Boolean { FALSE, TRUE };
(#define) : #define DEFAULT_SIZE 100;</programlisting>
- <para><emphasis>Note:</> We have a standard naming scheme for #defines
+ <para><emphasis>Note:</emphasis> We have a standard naming scheme for #defines
that toggle a feature in the preprocessor: FEATURE_>, where
> is a short (preferably 1 or 2 word) description.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
#define FEATURE_FORCE 1
<sect3 id="s14"><title>Constants</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Spell common words out entirely (do not remove vowels).</para>
<para>Use underscore (_) to separate adjacent acronyms and
abbreviations. Never terminate a name with an underscore.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
#define USE_IMAGE_LIST 1</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>
<programlisting>
<sect3 id="s16"><title>Put braces on a line by themselves.</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>The brace needs to be on a line all by itself, not at the
end of the statement. Curly braces should line up with the
easier to identify the opening and closing braces for a
block.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
if ( this == that )
{
...
}</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>if ( this == that ) { ... }</para>
<para>if ( this == that ) { ... }</para>
- <para><emphasis>Note:</> In the special case that the if-statement is
+ <para><emphasis>Note:</emphasis> In the special case that the if-statement is
inside a loop, and it is trivial, i.e. it tests for a
condidtion that is obvious from the purpose of the block,
one-liners as above may optically preserve the loop structure
and make it easier to read.</para>
- <para><emphasis>Status:</> developer-discrection.</para>
+ <para><emphasis>Status:</emphasis> developer-discrection.</para>
- <para><emphasis>Example exception:</></para>
+ <para><emphasis>Example exception:</emphasis></para>
<programlisting>
while ( more lines are read )
{
<sect3 id="s17"><title>ALL control statements should have a
block</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Using braces to make a block will make your code more
readable and less prone to error. All control statements should
have a block defined.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
if ( this == that )
{
DoSomethingElse();
}</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>if ( this == that ) DoSomething(); DoSomethingElse();</para>
<para>if ( this == that ) DoSomething();</para>
- <para><emphasis>Note:</> The first example in "Instead of" will execute
+ <para><emphasis>Note:</emphasis> The first example in "Instead of" will execute
in a manner other than that which the developer desired (per
indentation). Using code braces would have prevented this
"feature". The "explanation" and "exception" from the point
<sect3 id="s18"><title>Do not belabor/blow-up boolean
expressions</title>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
structure->flag = ( condition );</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>if ( condition ) { structure->flag = 1; } else {
structure->flag = 0; }</para>
- <para><emphasis>Note:</> The former is readable and consice. The later
+ <para><emphasis>Note:</emphasis> The former is readable and consice. The later
is wordy and inefficient. Please assume that any developer new
to the project has at least a "good" knowledge of C/C++. (Hope
I do not offend by that last comment ... 8-)</para>
<sect3 id="s19"><title>Use white space freely because it is
free</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Make it readable. The notable exception to using white space
freely is listed in the next guideline.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
int firstValue = 0;
int someValue = 0;
<sect3 id="s20"><title>Don't use white space around structure
operators</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>- structure pointer operator ( "->" ) - member operator (
"." ) - functions and parentheses</para>
connection between the object and variable/function name is not
as clear.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
aStruct->aMember;
aStruct.aMember;
FunctionName();</programlisting>
- <para><emphasis>Instead of:</> aStruct -> aMember; aStruct . aMember;
+ <para><emphasis>Instead of:</emphasis> aStruct -> aMember; aStruct . aMember;
FunctionName ();</para>
<sect3 id="s21"><title>Make the last brace of a function stand
out</title>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
int function1( ... )
{
} /* -END- function2 */
</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>int function1( ... ) { ...code... return( retCode ); } int
function2( ... ) { }</para>
- <para><emphasis>Note:</> Use 1 blank line before the closing brace and 2
+ <para><emphasis>Note:</emphasis> Use 1 blank line before the closing brace and 2
lines afterwards. This makes the end of function standout to
the most casual viewer. Although function comments help
seperate functions, this is still a good coding practice. In
"do" loops, and long if {} statements too. After all whitespace
is free!</para>
- <para><emphasis>Status:</> developer-discrection on the number of blank
+ <para><emphasis>Status:</emphasis> developer-discrection on the number of blank
lines. Enforced is the end of function comments.</para>
<sect3 id="s22"><title>Use 3 character indentions</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>If some use 8 character TABs and some use 3 character TABs,
the code can look *very* ragged. So use 3 character indentions
only. If you like to use TABs, pass your code through a filter
such as "expand -t3" before checking in your code.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
static const char * const url_code_map[256] =
{
<sect3 id="s24"><title>Initialize all variables</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Do not assume that the variables declared will not be used
until after they have been assigned a value somewhere else in
the code. Remove the chance of accidentally using an unassigned
variable.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
short anShort = 0;
float aFloat = 0;
struct *ptr = NULL;</programlisting>
- <para><emphasis>Note:</> It is much easier to debug a SIGSEGV if the
+ <para><emphasis>Note:</emphasis> It is much easier to debug a SIGSEGV if the
message says you are trying to access memory address 00000000
and not 129FA012; or arrayPtr[20] causes a SIGSEV vs.
arrayPtr[0].</para>
- <para><emphasis>Status:</> developer-discrection if and only if the
+ <para><emphasis>Status:</emphasis> developer-discrection if and only if the
variable is assigned a value "shortly after" declaration.</para>
</sect3>
<sect3 id="s26"><title>Name functions that return a boolean as a
question.</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Value should be phrased as a question that would logically
be answered as a true or false statement</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
ShouldWeBlockThis();
ContainsAnImage();
<sect3 id="s27"><title>Always specify a return type for a
function.</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>The default return for a function is an int. To avoid
ambiguity, create a return for a function when the return has a
<sect3 id="s28"><title>Minimize function calls when iterating by
using variables</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>It is easy to write the following code, and a clear argument
can be made that the code is easy to understand:</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
-for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ )
+for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ )
{
....
}</programlisting>
- <para><emphasis>Note:</> Unfortunately, this makes a function call for
+ <para><emphasis>Note:</emphasis> Unfortunately, this makes a function call for
each and every iteration. This increases the overhead in the
program, because the compiler has to look up the function each
time, call it, and return a value. Depending on what occurs in
assign the value to a variable, and evaluate using the
variable.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
size_t len = blockListLength();
-for ( size_t cnt = 0; cnt < len; cnt ++ )
+for ( size_t cnt = 0; cnt < len; cnt ++ )
{
....
}</programlisting>
- <para><emphasis>Exceptions:</> if the value of blockListLength() *may*
+ <para><emphasis>Exceptions:</emphasis> if the value of blockListLength() *may*
change or could *potentially* change, then you must code the
function call in the for/while loop.</para>
<sect3 id="s29"><title>Pass and Return by Const Reference</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>This allows a developer to define a const pointer and call
your function. If your function does not have the const
char *s2 );</para>
<para>I could then not use it to compare argv's in main: int main(
- int argc, const char *argv[] ) { strcmp( argv[0], "junkbusters"
+ int argc, const char *argv[] ) { strcmp( argv[0], "privoxy"
); }</para>
<para>Both these pointers are *const*! If the c runtime library
<sect3 id="s30"><title>Pass and Return by Value</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Most structures cannot fit onto a normal stack entry (i.e.
they are not 4 bytes or less). Aka, a function declaration
<sect3 id="s31"><title>Names of include files</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Your include statements should contain the file name without
a path. The path should be listed in the Makefile, using -I as
partial path to distinguish their header files from system or
other header files.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
#include <iostream.h> /* This is not a local include */
#include "config.h" /* This IS a local include */
</programlisting>
- <para><emphasis>Exception:</></para>
+ <para><emphasis>Exception:</emphasis></para>
<para>
<programlisting>
</programlisting>
</para>
- <para><emphasis>Note:</> Please! do not add "-I." to the Makefile
+ <para><emphasis>Note:</emphasis> Please! do not add "-I." to the Makefile
without a _very_ good reason. This duplicates the #include
"file.h" behaviour.</para>
<sect3 id="s32"><title>Provide multiple inclusion
protection</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Prevents compiler and linker errors resulting from
redefinition of items.</para>
with your file name, with "." Changed to "_", and make it
uppercase.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
#ifndef PROJECT_H_INCLUDED
#define PROJECT_H_INCLUDED
<sect3 id="s33"><title>Use `extern "C"` when appropriate</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>If our headers are included from C++, they must declare our
functions as `extern "C"`. This has no cost in C, but increases
the potential re-usability of our code.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
#ifdef __cplusplus
extern "C"
<sect3 id="s34"><title>Where Possible, Use Forward Struct
Declaration Instead of Includes</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Useful in headers that include pointers to other struct's.
Modifications to excess header files may cause needless
compiles.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
/*********************************************************************
* We're avoiding an include statement here!
struct file_list;
extern file_list *xyz;</programlisting>
- <para><emphasis>Note:</> If you declare "file_list xyz;" (without the
+ <para><emphasis>Note:</emphasis> If you declare "file_list xyz;" (without the
pointer), then including the proper header file is necessary.
If you only want to prototype a pointer, however, the header
file is unneccessary.</para>
- <para><emphasis>Status:</> Use with discrection.</para>
+ <para><emphasis>Status:</emphasis> Use with discrection.</para>
</sect3>
<sect3 id="s36"><title>Turn on warnings</title>
- <para><emphasis>Explanation</></para>
+ <para><emphasis>Explanation</emphasis></para>
<para>Compiler warnings are meant to help you find bugs. You
should turn on as many as possible. With GCC, the switch is
<sect3 id="s37"><title>Provide a default case for all switch
statements</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>What you think is guaranteed is never really guaranteed. The
value that you don't think you need to check is the one that
someday will be passed. So, to protect yourself from the
unknown, always have a default step in a switch statement.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
switch( hash_string( cmd ) )
{
} /* end switch( hash_string( cmd ) ) */</programlisting>
- <para><emphasis>Note:</> If you already have a default condition, you
+ <para><emphasis>Note:</emphasis> If you already have a default condition, you
are obviously exempt from this point. Of note, most of the
WIN32 code calls `DefWindowProc' after the switch statement.
This API call *should* be included in a default statement.</para>
- <para><emphasis>Another Note:</> This is not so much a readability issue
+ <para><emphasis>Another Note:</emphasis> This is not so much a readability issue
as a robust programming issue. The "anomly code goes here" may
be no more than a print to the STDERR stream (as in
load_config). Or it may really be an ABEND condition.</para>
- <para><emphasis>Status:</> Programmer discretion is advised.</para>
+ <para><emphasis>Status:</emphasis> Programmer discretion is advised.</para>
</sect3>
<sect3 id="s38"><title>Try to avoid falling through cases in a
switch statement.</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>In general, you will want to have a 'break' statement within
each 'case' of a switch statement. This allows for the code to
<sect3 id="s39"><title>Use 'long' or 'short' Instead of
'int'</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>On 32-bit platforms, int usually has the range of long. On
16-bit platforms, int has the range of short.</para>
- <para><emphasis>Status:</> open-to-debate. In the case of most FSF
+ <para><emphasis>Status:</emphasis> open-to-debate. In the case of most FSF
projects (including X/GNU-Emacs), there are typedefs to int4,
int8, int16, (or equivalence ... I forget the exact typedefs
now). Should we add these to IJB now that we have a "configure"
<sect3 id="s40"><title>Don't mix size_t and other types</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>The type of size_t varies across platforms. Do not make
assumptions about whether it is signed or unsigned, or about
<sect3 id="s41"><title>Declare each variable and struct on its
own line.</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>It can be tempting to declare a series of variables all on
one line. Don't.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
long a = 0;
long b = 0;
long c = 0;</programlisting>
- <para><emphasis>Instead of:</></para>
+ <para><emphasis>Instead of:</emphasis></para>
<para>long a, b, c;</para>
- <para><emphasis>Explanation:</> - there is more room for comments on the
+ <para><emphasis>Explanation:</emphasis> - there is more room for comments on the
individual variables - easier to add new variables without
messing up the original ones - when searching on a variable to
find its type, there is less clutter to "visually"
eliminate</para>
- <para><emphasis>Exceptions:</> when you want to declare a bunch of loop
+ <para><emphasis>Exceptions:</emphasis> when you want to declare a bunch of loop
variables or other trivial variables; feel free to declare them
on 1 line. You should, although, provide a good comment on
their functions.</para>
- <para><emphasis>Status:</> developer-discrection.</para>
+ <para><emphasis>Status:</emphasis> developer-discrection.</para>
</sect3>
<sect3 id="s42"><title>Use malloc/zalloc sparingly</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>Create a local stuct (on the stack) if the variable will
live and die within the context of one function call.</para>
<para>Only "malloc" a struct (on the heap) if the variable's life
will extend beyond the context of one function call.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
If a function creates a struct and stores a pointer to it in a
list, then it should definately be allocated via `malloc'.
<sect3 id="s43"><title>The Programmer Who Uses 'malloc' is
Responsible for Ensuring 'free'</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>If you have to "malloc" an instance, you are responsible for
insuring that the instance is `free'd, even if the deallocation
"good thing (tm)". You may need to offer a
free/unload/destuctor type function to accomodate this.</para>
- <para><emphasis>Example:</></para>
+ <para><emphasis>Example:</emphasis></para>
<programlisting>
int load_re_filterfile( struct client_state *csp ) { ... }
static void unload_re_filterfile( void *f ) { ... }</programlisting>
- <para><emphasis>Exceptions:</></para>
+ <para><emphasis>Exceptions:</emphasis></para>
<para>The developer cannot be expected to provide `free'ing
functions for C run-time library functions ... such as
`strdup'.</para>
- <para><emphasis>Status:</> developer-discrection. The "main" use of this
+ <para><emphasis>Status:</emphasis> developer-discrection. The "main" use of this
standard is for allocating and freeing data structures (complex
or nested).</para>
<sect3 id="s44"><title>Add loaders to the `file_list' structure
and in order</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>I have ordered all of the "blocker" file code to be in alpha
order. It is easier to add/read new blockers when you expect a
certain order.</para>
- <para><emphasis>Note:</> It may appear that the alpha order is broken in
+ <para><emphasis>Note:</emphasis> It may appear that the alpha order is broken in
places by POPUP tests coming before PCRS tests. But since
POPUPs can also be referred to as KILLPOPUPs, it is clear that
it should come first.</para>
<sect3 id="s45"><title>"Uncertain" new code and/or changes to
exitinst code, use FIXME</title>
- <para><emphasis>Explanation:</></para>
+ <para><emphasis>Explanation:</emphasis></para>
<para>If you have enough confidence in new code or confidence in
your changes, but are not *quite* sure of the reprocussions,
<para>/* FIXME: new code that *may* break something else... */
...new code here...</para>
- <para><emphasis>Note:</> If you make it clear that this may or may not
+ <para><emphasis>Note:</emphasis> If you make it clear that this may or may not
be a "good thing (tm)", it will be easier to identify and
include in the project (or conversly exclude from the
project).</para>
<sect2 id="s46"><title>Addendum: Template for files and function
comment blocks:</title>
- <para><emphasis>Example for file comments:</></para>
+ <para><emphasis>Example for file comments:</emphasis></para>
<programlisting>
-const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.2 2001/09/13 15:20:17 swa Exp $";
+const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.18 2002/04/03 03:51:48 hal9 Exp $";
/*********************************************************************
*
* File : $S<!-- Break CVS Substitution -->ource$
* Purpose : (Fill me in with a good description!)
*
* Copyright : Written by and Copyright (C) 2001 the SourceForge
- * IJBSWA team. http://ijbswa.sourceforge.net
+ * Privoxy team. http://www.privoxy.org/
*
* Based on the Internet Junkbuster originally written
* by and Copyright (C) 1997 Anonymous Coders and
const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
</programlisting>
- <para><emphasis>Note:</> This declares the rcs variables that should be
+ <para><emphasis>Note:</emphasis> This declares the rcs variables that should be
added to the "show-proxy-args" page. If this is a brand new
creation by you, you are free to change the "Copyright" section
to represent the rights you wish to maintain.</para>
- <para><emphasis>Note:</> The formfeed character that is present right
+ <para><emphasis>Note:</emphasis> The formfeed character that is present right
after the comment flower box is handy for (X|GNU)Emacs users to
skip the verbige and get to the heart of the code (via
`forward-page' and `backward-page'). Please include it if you
can.</para>
- <para><emphasis>Example for file header comments:</></para>
+ <para><emphasis>Example for file header comments:</emphasis></para>
<programlisting>
#ifndef _FILENAME_H
#define _FILENAME_H
-#define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.2 2001/09/13 15:20:17 swa Exp $"
+#define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.18 2002/04/03 03:51:48 hal9 Exp $"
/*********************************************************************
*
* File : $S<!-- Break CVS Substitution -->ource$
* Purpose : (Fill me in with a good description!)
*
* Copyright : Written by and Copyright (C) 2001 the SourceForge
- * IJBSWA team. http://ijbswa.sourceforge.net
+ * Privoxy team. http://www.privoxy.org/
*
* Based on the Internet Junkbuster originally written
* by and Copyright (C) 1997 Anonymous Coders and
*/
</programlisting>
- <para><emphasis>Example for function comments:</></para>
+ <para><emphasis>Example for function comments:</emphasis></para>
<programlisting>
/*********************************************************************
*
*
* Description : (Fill me in with a good description!)
*
- * Parameters :
+ * parameters :
* 1 : param1 = pointer to an important thing
* 2 : x = pointer to something else
*
}
</programlisting>
- <para><emphasis>Note:</> If we all follow this practice, we should be
+ <para><emphasis>Note:</emphasis> If we all follow this practice, we should be
able to parse our code to create a "self-documenting" web
page.</para>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="cvs"><title>Version Control Guidelines</title>
- <para>To be filled. note on cvs comments. don't comment what you did, comment
-why you did it.
+ <para>To be filled. note on cvs comments. Don't only comment what you did,
+ but also why you did it!
</para>
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect2 id="testing-plan"><title>Testplan for releases</title>
<para>
-Explain release numbers. major, minor. developer releases. etc.
+ Explain release numbers. major, minor. developer releases. etc.
-<OrderedList Numeration="Arabic">
- <ListItem><Para>
+<orderedlist numeration="arabic">
+ <listitem><para>
Remove any existing rpm with rpm -e
-</Para></ListItem>
- <ListItem><Para>
+</para></listitem>
+ <listitem><para>
Remove any file that was left over. This includes (but is not limited to)
- <ItemizedList>
- <ListItem><Para>/var/log/junkbuster</Para></ListItem>
- <ListItem><Para>/etc/junkbuster</Para></ListItem>
- <ListItem><Para>/usr/sbin/junkbuster</Para></ListItem>
- <ListItem><Para>/etc/init.d/junkbuster</Para></ListItem>
- <ListItem><Para>/usr/doc/junkbuster*</Para></ListItem>
- </ItemizedList>
-</Para></ListItem>
- <ListItem><Para>
+ <itemizedlist>
+ <listitem><para>/var/log/privoxy</para></listitem>
+ <listitem><para>/etc/privoxy</para></listitem>
+ <listitem><para>/usr/sbin/privoxy</para></listitem>
+ <listitem><para>/etc/init.d/privoxy</para></listitem>
+ <listitem><para>/usr/doc/privoxy*</para></listitem>
+ </itemizedlist>
+</para></listitem>
+ <listitem><para>
Install the rpm. Any error messages?
-</Para></ListItem>
- <ListItem><Para>start,stop,status junkbuster with the specific script
- (e.g. /etc/rc.d/init/junkbuster stop). Reboot your machine. Does
- autostart work?</Para></ListItem>
- <ListItem><Para>Start browsing. Does the junkbuster work? Logfile written?</Para></ListItem>
- <ListItem><Para>Remove the rpm. Any error messages? All files removed?</Para></ListItem>
- </OrderedList>
+</para></listitem>
+ <listitem><para>start,stop,status <application>Privoxy</application> with the specific script
+ (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does
+ autostart work?</para></listitem>
+ <listitem><para>Start browsing. Does <application>Privoxy</application> work? Logfile written?</para></listitem>
+ <listitem><para>Remove the rpm. Any error messages? All files removed?</para></listitem>
+ </orderedlist>
</para>
</sect2>
<para>
Please submit test reports only with the <ulink url="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005">test form</ulink>
at sourceforge. Three simple steps:
- <ItemizedList>
-
- <ListItem><Para>Select category: the distribution you test on.</Para></ListItem>
- <ListItem><Para>Select group: the version of Junkbuster that we are about to release.</Para></ListItem>
- <ListItem><Para>Fill the Summary and Detailed Description with something
- intelligent (keep it short and precise).</Para>
- </ListItem>
- </ItemizedList>
- Do not mail to the mailinglist (we cannot keep track on issues there).
+ <itemizedlist>
+
+ <listitem><para>Select category: the distribution you test on.</para></listitem>
+ <listitem><para>Select group: the version of <application>Privoxy</application> that we are about to release.</para></listitem>
+ <listitem><para>Fill the Summary and Detailed Description with something
+ intelligent (keep it short and precise).</para>
+ </listitem>
+ </itemizedlist>
+ Do not mail to the mailinglist (we cannot keep track on issues there).
</para>
</sect2>
</sect1>
+
+ <!-- ~~~~~ New section ~~~~~ -->
+ <sect1 id="newrelease"><title>Releasing a new version</title>
+ <para>
+ To minimize trouble with distribution contents, webpage
+ errors and the like, we strongly encourage you
+ to follow this section if you prepare a new release of
+ code or new pages on the webserver.
+ </para>
+ <para>
+ The following programs are required to follow this process:
+ <filename>ncftpput</filename> (ncftp), <filename>scp</filename> (ssh),
+<filename>gmake</filename> (GNU's version of make), autoconf, cvs, ???.
+ </para>
+
+ <sect2 id="beforerelease">
+ <title>Before the Release</title>
+ <para>
+ The following <emphasis>must be done by one of the
+ developers</emphasis> prior to each new release:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ Make sure that everybody who has worked on the code in the last
+ couple of days has had a chance to yell <quote>no!</quote> in case
+ they have pending changes/fixes in their pipelines.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Increment the version number in <filename>configure.in</filename> in
+ CVS. Also, the RPM release number in
+ <filename>configure.in</filename>. Do NOT touch version information
+ after export from CVS. <emphasis>All packages</emphasis> will use the
+ version and release data from <filename>configure.in</filename>.
+ Local files should not be changed, except prior to a CVS commit!!!
+ This way we are all on the same page!
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ If the default actionsfile has changed since last release,
+ bump up its version info in this line:
+ </para>
+ <para>
+ <programlisting>
+ {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
+ </programlisting>
+ </para>
+ <para>
+ Then change the version info in doc/webserver/actions/index.php,
+ line: '$required_actions_file_version = "A.B";'
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Tag all files in CVS with the version number with
+ <quote><command>cvs tag v_X_Y_Z</command></quote> (where X = major, Y
+ = minor, Z = point). Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work)
+ etc.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The first package uploaded should be the official
+ <quote>tarball</quote> release. This is built with the
+ <quote><command>make tarball-dist</command></quote> Makefile
+ target, and then can be uploaded with
+ <quote><command>make tarball-upload</command></quote> (see below).
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-web"><title>Update the webserver</title>
+ <para>
+ All files must be group-readable and group-writable (or no one else
+ will be able to change them). To update the webserver, create any
+ pages locally in the <filename>doc/webserver</filename> directory (or
+ create new directories under <filename>doc/webserver</filename>), then do
+ </para>
+ <para>
+ <programlisting>
+ make webserver
+ </programlisting>
+ </para>
+ <para>
+ Note that <quote><command>make dok</command></quote>
+ (or <quote><command>make redhat-dok</command></quote>) creates
+ <filename>doc/webserver/user-manual</filename>,
+ <filename>doc/webserver/developer-manual</filename>,
+ <filename>doc/webserver/faq</filename> and
+ <filename>doc/webserver/man-page</filename> automatically.
+ </para>
+ <para>
+ Please do NOT use any other means of transferring files to the
+ webserver. <quote><command>make webserver</command></quote> not only
+ uploads, but will make sure that the appropriate permissions are
+ preserved for shared group access.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-rpm"><title>SuSE or Red Hat</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ first.
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do
+ </para>
+ <para>
+ <programlisting>
+ make suse-dist or make redhat-dist
+ </programlisting>
+ </para>
+ <para>
+ To upload the package to Sourceforge, simply issue
+ </para>
+ <para>
+ <programlisting>
+ make suse-upload or make redhat-upload
+ </programlisting>
+ </para>
+ <para>
+ Go to the displayed URL and release the file publicly on Sourceforge.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-os2"><title>OS/2</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ cd ..
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co os2setup
+ </programlisting>
+ </para>
+ <para>
+ You will need a mix of development tools.
+ The main compilation takes place with IBM Visual Age C++.
+ Some ancillary work takes place with GNU tools, available from
+ various sources like hobbes.nmsu.edu.
+ Specificially, you will need <filename>autoheader</filename>,
+ <filename>autoconf</filename> and <filename>sh</filename> tools.
+ The packaging takes place with WarpIN, available from various sources, including
+ its home page: <ulink url="http://www.xworkplace.org/">xworkplace</ulink>.
+ </para>
+ <para>
+ Change directory to the <filename>os2setup</filename> directory.
+ Edit the os2build.cmd file to set the final executable filename.
+ For example,
+ <programlisting>
+ installExeName='privoxyos2_setup_2.9.13_beta.exe'
+ </programlisting>
+ Next, edit the <filename>IJB.wis</filename> file so the release number matches
+ in the <filename>PACKAGEID</filename> section:
+ <programlisting>
+ PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\2\9\13"
+ </programlisting>
+ You're now ready to build. Run:
+ <programlisting>
+ os2build
+ </programlisting>
+ And in the <filename>./files</filename> directory you will have the WarpIN-installable executable.
+ Upload this to <filename>uploads.sourceforge.net/incoming<filename>, create a release for it, and
+ you're done.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-solaris"><title>Solaris</title>
+ <para>
+ Login to Sourceforge's compilefarm via ssh
+ </para>
+ <para>
+ <programlisting>
+ ssh cf.sourceforge.net
+ </programlisting>
+ </para>
+ <para>
+ Choose the right operating system (not the Debian one). If you have
+ downloaded <application>Privoxy</application> before,
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ If not, please <ulink
+ url="http://www.privoxy.org/user-manual/user-manual/installation.html#INSTALLATION-SOURCE">checkout
+ Privoxy via CVS first</ulink>. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then run
+ </para>
+ <para>
+ <programlisting>
+ gmake solaris-dist
+ </programlisting>
+ </para>
+ <para>
+ which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
+ solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have
+ to manually upload the archive to Sourceforge's ftp server and release
+ the file publicly.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-windows"><title>Windows</title>
+ <para>
+ Ensure that you have the latest code version. Hence run
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do FIXME.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-debian"><title>Debian</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ first. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do FIXME.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-macosx"><title>Mac OSX</title>
+ <para>
+ Login to Sourceforge's compilefarm via ssh
+ </para>
+ <para>
+ <programlisting>
+ ssh cf.sourceforge.net
+ </programlisting>
+ </para>
+ <para>
+ Choose the right operating system. If you have downloaded Privoxy
+ before,
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ If not, please <ulink
+ url="http://www.privoxy.org/user-manual/user-manual/installation.html#INSTALLATION-SOURCE">checkout
+ Privoxy via CVS first</ulink>. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then run:
+ </para>
+ <para>
+ <programlisting>
+ make macosx-dist
+ </programlisting>
+ </para>
+ <para>
+ which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
+ macosx-upload</command> on the Sourceforge machine (no ncftpput). You now have
+ to manually upload the archive to Sourceforge's ftp server and release
+ the file publicly.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-freebsd"><title>FreeBSD</title>
+ <para>
+ Change the version number of <application>Privoxy</application> in the
+ configure.in file. Run:
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ Then ...
+ </para>
+ <para>
+ Login to Sourceforge's compilefarm via ssh:
+ </para>
+ <para>
+ <programlisting>
+ ssh cf.sourceforge.net
+ </programlisting>
+ </para>
+ <para>
+ Choose the right operating system. If you have downloaded Privoxy
+ before,
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ If not, please <ulink
+ url="http://www.privoxy.org/user-manual/user-manual/installation.html#INSTALLATION-SOURCE">checkout
+ Privoxy via CVS first</ulink>. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then run:
+ </para>
+ <para>
+ <programlisting>
+ gmake freebsd-dist
+ </programlisting>
+ </para>
+ <para>
+ which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
+ freebsd-upload</command> on the Sourceforge machine (no ncftpput). You now have
+ to manually upload the archive to Sourceforge's ftp server and release
+ the file publicly.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-tarball"><title>Tarball</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ first. Run:
+ </para>
+ <para>
+ <programlisting>
+ make clobber
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do:
+ </para>
+ <para>
+ <programlisting>
+ make tarball-dist
+ </programlisting>
+ </para>
+ <para>
+ To upload the package to Sourceforge, simply issue
+ </para>
+ <para>
+ <programlisting>
+ make tarball-upload
+ </programlisting>
+ </para>
+ <para>
+ Goto the displayed URL and release the file publicly on Sourceforge.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-hpux"><title>HP-UX 11</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ first. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do FIXME.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-amiga"><title>Amiga OS</title>
+ <para>
+ Ensure that you have the latest code version. Hence run:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ first. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then do FIXME.
+ </para>
+ </sect2>
+
+ <sect2 id="newrelease-aix"><title>AIX</title>
+ <para>
+ Login to Sourceforge's compilefarm via ssh:
+ </para>
+ <para>
+ <programlisting>
+ ssh cf.sourceforge.net
+ </programlisting>
+ </para>
+ <para>
+ Choose the right operating system. If you have downloaded Privoxy
+ before:
+ </para>
+ <para>
+ <programlisting>
+ cd current
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ </programlisting>
+ </para>
+ <para>
+ If not, please <ulink
+ url="http://www.privoxy.org/user-manual/user-manual/installation.html#INSTALLATION-SOURCE">checkout
+ Privoxy via CVS first</ulink>. Run:
+ </para>
+ <para>
+ <programlisting>
+ autoheader && autoconf && ./configure
+ </programlisting>
+ </para>
+ <para>
+ Then run:
+ </para>
+ <para>
+ <programlisting>
+ make aix-dist
+ </programlisting>
+ </para>
+ <para>
+ which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
+ aix-upload</command> on the Sourceforge machine (no ncftpput). You now have
+ to manually upload the archive to Sourceforge's ftp server and release
+ the file publicly.
+ </para>
+ </sect2>
+
+ </sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="contact"><title>Contact the developers</title>
- <para>Please see the user manual for information on how to contact the developers.
+ <para>
+ Please see the contact page in the <ulink
+ url="../user-manual/contact.html">user-manual</ulink> for details.
</para>
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="copyright"><title>Copyright and History</title>
- <para>Please see the user manual for information on Copyright and History.
- </para>
+ <para>
+ Please see the <ulink
+ url="../user-manual/copyright.html#HISTORY">user-manual</ulink> for
+ information on Copyright and History.
+ </para>
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="seealso"><title>See also</title>
- <para>Please see the user manual for information on references.
+ <para>
+ Please see the <ulink
+ url="../user-manual/seealso.html">user-manual</ulink> for others
+ references.
</para>
</sect1>
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
$Log: developer-manual.sgml,v $
+ Revision 1.18 2002/04/03 03:51:48 hal9
+ Touch ups.
+
+ Revision 1.17 2002/04/03 01:21:17 hal9
+ Implementing Andreas's suggestions for Release sections.
+
+ Revision 1.16 2002/03/31 23:04:40 hal9
+ Fleshed out the doc section, and added something for an intro so it was not
+ blank.
+
+ Revision 1.15 2002/03/30 22:29:47 swa
+ wrong make flavour
+
+ Revision 1.14 2002/03/30 19:04:08 swa
+ people release differently. no good.
+ I want to make parts of the docs only.
+
+ Revision 1.13 2002/03/27 01:16:41 hal9
+ ditto
+
+ Revision 1.12 2002/03/27 01:02:51 hal9
+ Touch up on name change...
+
+ Revision 1.11 2002/03/26 22:29:55 swa
+ we have a new homepage!
+
+ Revision 1.10 2002/03/24 12:33:01 swa
+ more additions.
+
+ Revision 1.9 2002/03/24 11:01:05 swa
+ name change
+
+ Revision 1.8 2002/03/23 15:13:11 swa
+ renamed every reference to the old name with foobar.
+ fixed "application foobar application" tag, fixed
+ "the foobar" with "foobar". left junkbustser in cvs
+ comments and remarks to history untouched.
+
+ Revision 1.7 2002/03/11 13:13:27 swa
+ correct feedback channels
+
+ Revision 1.6 2002/02/24 14:25:06 jongfoster
+ Formatting changes. Now changing the doctype to DocBook XML 4.1
+ will work - no other changes are needed.
+
+ Revision 1.5 2001/10/31 18:16:51 swa
+ documentation added: howto generate docs in text and html
+ format, howto move stuff to the webserver.
+
+ Revision 1.4 2001/09/23 10:13:48 swa
+ upload process established. run make webserver and
+ the documentation is moved to the webserver. documents
+ are now linked correctly.
+
+ Revision 1.3 2001/09/13 15:27:40 swa
+ cosmetics
+
Revision 1.2 2001/09/13 15:20:17 swa
merged standards into developer manual