-# Sample Configuration file for Privoxy v2.9.15
+# Sample Configuration File for Privoxy v2.9.20
#
# Copyright (C) 2001, 2002 Privoxy Developers http://privoxy.org
#
-# $Id: config,v 1.39 2002/05/12 03:21:21 hal9 Exp $
-#
-##################################################################
-# #
-# Table of Contents #
-# #
-# I. INTRODUCTION #
-# II. FORMAT OF THE CONFIGURATION FILE #
-# #
-# 1. CONFIGURATION AND LOG FILE LOCATIONS #
-# 2. LOCAL SET-UP DOCUMENTATION #
-# 3. DEBUGGING #
-# 4. ACCESS CONTROL AND SECURITY #
-# 5. FORWARDING #
-# 6. WINDOWS GUI OPTIONS #
-# #
-##################################################################
-
-#
-# I. INTRODUCTION
-# ===============
+# $Id: config,v 1.39.2.4 2002/08/07 01:35:23 hal9 Exp $
+#
+####################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. CONFIGURATION AND LOG FILE LOCATIONS #
+# 2. LOCAL SET-UP DOCUMENTATION #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+####################################################################
+#
+#
+# I. INTRODUCTION
+# ===============
#
# This file holds the Privoxy configuration. If you modify this file,
# you will need to send a couple of requests to the proxy before any
# with the name 'config.txt' in the same directory where Privoxy
# is installed.
#
-
+#
# II. FORMAT OF THE CONFIGURATION FILE
# ====================================
#
#
# Long lines can be continued on the next line by using a `\' as the
# last character.
+#
-
+#
# 1. CONFIGURATION AND LOG FILE LOCATIONS
# =======================================
#
#
# The user running Privoxy, must have read permission for all
# configuration files, and write permission to any files that would
-# be modified, such as log files.
+# be modified, such as log files and actions files.
#
+#
# 1.1. confdir
# ============
#
#
confdir .
+#
# 1.2. logdir
# ===========
#
#
logdir .
+#
# 1.3. actionsfile
# ================
#
# Default values:
#
# standard # Internal purposes, no editing recommended
+#
# default # Main actions file
+#
# user # User customizations
#
# Effect if unset:
actionsfile default # Main actions file
actionsfile user # User customizations
+#
# 1.4. filterfile
# ===============
#
#
filterfile default.filter
+#
# 1.5. logfile
# ============
#
#
logfile logfile
+#
# 1.6. jarfile
# ============
#
#
jarfile jarfile
+#
# 1.7. trustfile
# ==============
#
# If you use + operator in the trust file, it may grow considerably
# over time.
#
-#trusfile trust
-
+#trustfile trust
+#
# 2. LOCAL SET-UP DOCUMENTATION
# =============================
#
# If you intend to operate Privoxy for more users than just yourself,
# it might be a good idea to let them know how to reach you, what
# you block and why you do that, your policies, etc.
+#
+#
# 2.1. user-manual
# ================
#
#
# Unix, in local filesystem:
#
-# user-manual file:///usr/share/doc/privoxy-2.9.15/user-manual/
+# user-manual file:///usr/share/doc/privoxy-2.9.18/user-manual/
#
# Any platform, on local webserver (called "local-webserver"):
#
# user-manual http://local-webserver/privoxy-user-manual/
#
-# +-----------------------------------------------------------------+
-# | Warning |
-# |-----------------------------------------------------------------|
-# |If this option is defined, it must come first! It is needed |
-# |before the rest of config is read. |
-# +-----------------------------------------------------------------+
+# WARNING!!!
+#
+# If set, this option should be the first option in the config
+# file, because it is used while the config file is being read.
#
#user-manual http://www.privoxy.org/user-manual/
+#
# 2.2. trust-info-url
# ===================
#
trust-info-url http://www.example.com/why_we_block.html
trust-info-url http://www.example.com/what_we_allow.html
+#
# 2.3. admin-address
# ==================
#
#
#admin-address privoxy-admin@example.com
+#
# 2.4. proxy-info-url
# ===================
#
#
#proxy-info-url http://www.example.com/proxy-service.html
-
+#
# 3. DEBUGGING
# ============
#
# These options are mainly useful when tracing a problem. Note that
# you might also want to invoke Privoxy with the --no-daemon command
# line option when debugging.
+#
+#
# 3.1. debug
# ==========
#
#
# The available debug levels are:
#
-# debug 1 # show each GET/POST/CONNECT request
-# debug 2 # show each connection status
-# debug 4 # show I/O status
-# debug 8 # show header parsing
-# debug 16 # log all data into the logfile
-# debug 32 # debug force feature
-# debug 64 # debug regular expression filter
-# debug 128 # debug fast redirects
-# debug 256 # debug GIF de-animation
-# debug 512 # Common Log Format
-# debug 1024 # debug kill pop-ups
-# debug 4096 # Startup banner and warnings.
-# debug 8192 # Non-fatal errors
+# debug 1 # show each GET/POST/CONNECT request
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filter
+# debug 128 # debug fast redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # debug kill pop-ups
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
#
# To select multiple debug levels, you can either add them or
# use multiple debug lines.
#
debug 1 # show each GET/POST/CONNECT request
debug 4096 # Startup banner and warnings
-debug 8192 # Errors - *we highly recommended enabling this
+debug 8192 # Errors - *we highly recommended enabling this*
+#
# 3.2. single-threaded
# ====================
#
#
#single-threaded
-
+#
# 4. ACCESS CONTROL AND SECURITY
# ==============================
#
# This section of the config file controls the security-relevant
# aspects of Privoxy's configuration.
+#
+#
# 4.1. listen-address
# ===================
#
#
listen-address 127.0.0.1:8118
+#
# 4.2. toggle
# ===========
#
#
toggle 1
+#
# 4.3. enable-remote-toggle
# =========================
#
#
enable-remote-toggle 1
+#
# 4.4. enable-edit-actions
# ========================
#
#
enable-edit-actions 1
+#
# 4.5. ACLs: permit-access and deny-access
# ========================================
#
# deny-access 192.168.45.73 www.dirty-stuff.example.com
#
+#
# 4.6. buffer-limit
# =================
#
#
buffer-limit 4096
-
+#
# 5. FORWARDING
# =============
#
#
# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
# 4 and SOCKS 4A protocols.
+#
+#
# 5.1. forward
# ============
#
#
# Type of value:
#
-# target_domain[:port] http_parent[/port]
+# target_pattern http_parent[:port]
#
-# Where target_domain is a domain name pattern (see the chapter
-# on domain matching in the default.action file), http_parent
-# is the address of the parent HTTP proxy as an IP addresses in
-# dotted decimal notation or as a valid DNS name (or "." to denote
-# "no forwarding", and the optional port parameters are TCP ports,
-# i.e. integer values from 1 to 64535
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use /
+# to denote "all URLs". http_parent[:port] is the DNS name or
+# IP address of the parent HTTP proxy through which the requests
+# should be forwarded, optionally followed by its listening port
+# (default: 8080). Use a single dot (.) to denote "no forwarding".
#
# Default value:
#
# Everything goes to an example anonymizing proxy, except SSL on
# port 443 (which it doesn't handle):
#
-# forward .* anon-proxy.example.org:8080
+# forward / anon-proxy.example.org:8080
# forward :443 .
#
# Everything goes to our example ISP's caching proxy, except for
# requests to that ISP's sites:
#
-# forward .*. caching-proxy.example-isp.net:8000
+# forward / caching-proxy.example-isp.net:8000
# forward .example-isp.net .
#
+#
# 5.2. forward-socks4 and forward-socks4a
# =======================================
#
#
# Type of value:
#
-# target_domain[:port] socks_proxy[/port] http_parent[/port]
+# target_pattern socks_proxy[:port] http_parent[:port]
#
-# Where target_domain is a domain name pattern (see the chapter
-# on domain matching in the default.action file), http_parent
-# and socks_proxy are IP addresses in dotted decimal notation
-# or valid DNS names (http_parent may be "." to denote "no HTTP
-# forwarding"), and the optional port parameters are TCP ports,
-# i.e. integer values from 1 to 64535
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use / to
+# denote "all URLs". http_parent and socks_proxy are IP addresses
+# in dotted decimal notation or valid DNS names (http_parent may
+# be "." to denote "no HTTP forwarding"), and the optional port
+# parameters are TCP ports, i.e. integer values from 1 to 64535
#
# Default value:
#
# ISP's proxy by way of example.com's corporate SOCKS 4A gateway
# to the Internet.
#
-# forward-socks4a .*. socks-gw.example.com:1080 www-cache.example-isp.net:8080
+# forward-socks4a / socks-gw.example.com:1080 www-cache.example-isp.net:8080
# forward .example.com .
#
# A rule that uses a SOCKS 4 gateway for all destinations but no
# HTTP parent looks like this:
#
-# forward-socks4 .*. socks-gw.example.com:1080 .
-
+# forward-socks4 / socks-gw.example.com:1080 .
+#
+#
# 6. WINDOWS GUI OPTIONS
# ======================
#
# Privoxy has a number of options specific to the Windows GUI
# interface:
+#
# If "activity-animation" is set to 1, the Privoxy icon will animate
# when "Privoxy" is active. To turn off, set to 0.
#
#activity-animation 1
-#
# If "log-messages" is set to 1, Privoxy will log messages to the
# console window:
#
#log-messages 1
-#
# If "log-buffer-size" is set to 1, the size of the log buffer,
# i.e. the amount of memory used for the log messages displayed in
# infinitely and eat up all your memory!
#
#log-buffer-size 1
-#
# log-max-lines is the maximum number of lines held in the log
# buffer. See above.
#
#log-max-lines 200
-#
# If "log-highlight-messages" is set to 1, Privoxy will highlight
# portions of the log messages with a bold-faced font:
#
#log-highlight-messages 1
-#
# The font used in the console window:
#
#log-font-name Comic Sans MS
-#
# Font size used in the console window:
#
#log-font-size 8
-#
# "show-on-task-bar" controls whether or not Privoxy will appear as
# a button on the Task bar when minimized:
#
#show-on-task-bar 0
-#
# If "close-button-minimizes" is set to 1, the Windows close button
# will minimize Privoxy instead of closing the program (close with
# the exit option on the File menu).
#
#close-button-minimizes 1
-#
# The "hide-console" option is specific to the MS-Win console version
# of Privoxy. If this option is used, Privoxy will disconnect from
# and hide the command console.
#
#hide-console
+
#
projects / privoxy.git / blobdiff