-# Sample Configuration File for Privoxy v3.0.11
+# Sample Configuration File for Privoxy v3.0.17
#
-# $Id: config,v 1.71 2009/02/08 18:35:48 fabiankeil Exp $
+# $Id: config,v 1.93 2010/11/13 12:48:18 fabiankeil Exp $
#
-# Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
+# Copyright (C) 2001-2010 Privoxy Developers http://www.privoxy.org/
#
####################################################################
# #
#
# user-manual /usr/share/doc/privoxy/user-manual
#
-#
# The User Manual is then available to anyone with
# access to Privoxy, by following the built-in URL:
# http://config.privoxy.org/user-manual/ (or the shortcut:
#
# user-manual http://example.com/privoxy/user-manual/
#
-#
# WARNING!!!
#
# If set, this option should be the first option in the config
# separate file, such as user.filter.
#
filterfile default.filter
-#filterfile user.filter # User customizations
+filterfile user.filter # User customizations
#
#
# 2.6. logfile
# debug 2 # show each connection status
# debug 4 # show I/O status
# debug 8 # show header parsing
-# debug 16 # log all data written to the network into the logfile
+# debug 16 # log all data written to the network
# debug 32 # debug force feature
# debug 64 # debug regular expression filters
# debug 128 # debug redirects
# debug 2048 # CGI user interface
# debug 4096 # Startup banner and warnings.
# debug 8192 # Non-fatal errors
+# debug 32768 # log all data read from the network
#
#
# To select multiple debug levels, you can either add them or
# use multiple debug lines.
#
# A debug level of 1 is informative because it will show you each
-# request as it happens. 1, 4096 and 8192 are recommended so that
-# you will notice when things go wrong. The other levels are
-# probably only of interest if you are hunting down a specific
+# request as it happens. 1, 1024, 4096 and 8192 are recommended
+# so that you will notice when things go wrong. The other levels
+# are probably only of interest if you are hunting down a specific
# problem. They can produce a hell of an output (especially 16).
#
# Privoxy used to ship with the debug levels recommended above
#
# Effect if unset:
#
-# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
-# recommended for home users who run Privoxy on the same machine
-# as their browser.
+# Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is suitable
+# and recommended for home users who run Privoxy on the same
+# machine as their browser.
#
# Notes:
#
# if you want to serve requests from other machines (e.g. on your
# local network) as well, you will need to override the default.
#
-# If you leave out the IP address, Privoxy will bind to all
+# IPv6 addresses containing colons have to be quoted by brackets.
+#
+# If you leave out the IP address, Privoxy will bind to all IPv4
# interfaces (addresses) on your machine and may become reachable
# from the Internet. In that case, consider using access control
# lists (ACL's, see below), and/or a firewall.
#
# listen-address 192.168.0.1:8118
#
+# Suppose you are running Privoxy on an IPv6-capable machine and
+# you want it to listen on the IPv6 address of the loopback device:
+#
+# listen-address [::1]:8118
#
listen-address 127.0.0.1:8118
#
#
# Type of value:
#
-# src_addr[/src_masklen] [dst_addr[/dst_masklen]]
+# src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]]
+#
+# Where src_addr and dst_addr are IPv4 addresses in dotted
+# decimal notation or valid DNS names, port is a port number, and
+# src_masklen and dst_masklen are subnet masks in CIDR notation,
+# i.e. integer values from 2 to 30 representing the length
+# (in bits) of the network address. The masks and the whole
+# destination part are optional.
#
-# Where src_addr and dst_addr are IP addresses in dotted decimal
-# notation or valid DNS names, and src_masklen and dst_masklen are
-# subnet masks in CIDR notation, i.e. integer values from 2 to 30
-# representing the length (in bits) of the network address. The
-# masks and the whole destination part are optional.
+# If your system implements RFC 3493, then src_addr and dst_addr
+# can be IPv6 addresses delimeted by brackets, port can be a
+# number or a service name, and src_masklen and dst_masklen can
+# be a number from 0 to 128.
#
# Default value:
#
# Unset
#
+# If no port is specified, any port will match. If no src_masklen
+# or src_masklen is given, the complete IP address has to match
+# (i.e. 32 bits for IPv4 and 128 bits for IPv6).
+#
# Effect if unset:
#
# Don't restrict access further than implied by listen-address
# names. If a DNS name resolves to multiple IP addresses, only
# the first one is used.
#
+# Some systems allow IPv4 clients to connect to IPv6 server
+# sockets. Then the client's IPv4 address will be translated by the
+# system into IPv6 address space with special prefix ::ffff:0:0/96
+# (so called IPv4 mapped IPv6 address). Privoxy can handle it
+# and maps such ACL addresses automatically.
+#
# Denying access to particular sites by ACL may have undesired
# side effects if the site in question is hosted on a machine
# which also hosts other sites (most sites are).
# permit-access 192.168.45.64/26
# deny-access 192.168.45.73 www.dirty-stuff.example.com
#
+# Allow access from the IPv4 network 192.0.2.0/24 even if listening
+# on an IPv6 wild card address (not supported on all platforms):
+#
+# permit-access 192.0.2.0/24
+#
+#
+# This is equivalent to the following line even if listening on
+# an IPv4 address (not supported on all platforms):
+#
+# permit-access [::ffff:192.0.2.0]/120
#
#
# 4.8. buffer-limit
# to denote "all URLs". http_parent[:port] is the DNS name or
# IP address of the parent HTTP proxy through which the requests
# should be forwarded, optionally followed by its listening port
-# (default: 8080). Use a single dot (.) to denote "no forwarding".
+# (default: 8000). Use a single dot (.) to denote "no forwarding".
#
# Default value:
#
# If http_parent is ".", then requests are not forwarded to
# another HTTP proxy but are made directly to the web servers.
#
+# http_parent can be a numerical IPv6 address (if RFC 3493 is
+# implemented). To prevent clashes with the port delimiter,
+# the whole IP address has to be put into brackets. On the other
+# hand a target_pattern containing an IPv6 address has to be put
+# into angle brackets (normal brackets are reserved for regular
+# expressions already).
+#
# Multiple lines are OK, they are checked in sequence, and the
# last match wins.
#
# forward .isp.example.net .
#
#
+# Parent proxy specified by an IPv6 address:
+#
+# forward / [2001:DB8::1]:8000
+#
+#
+# Suppose your parent proxy doesn't support IPv6:
+#
+# forward / parent-proxy.example.org:8000
+# forward ipv6-server.example.org .
+# forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> .
#
#
# 5.2. forward-socks4, forward-socks4a and forward-socks5
# With forward-socks5 the DNS resolution will happen on the remote
# server as well.
#
+# socks_proxy and http_parent can be a numerical IPv6 address
+# (if RFC 3493 is implemented). To prevent clashes with the port
+# delimiter, the whole IP address has to be put into brackets. On
+# the other hand a target_pattern containing an IPv6 address has
+# to be put into angle brackets (normal brackets are reserved
+# for regular expressions already).
+#
# If http_parent is ".", then requests are not forwarded to another
# HTTP proxy but are made (HTTP-wise) directly to the web servers,
# albeit through a SOCKS proxy.
# To chain Privoxy and Tor, both running on the same system,
# you would use something like:
#
-# forward-socks4a / 127.0.0.1:9050 .
+# forward-socks5 / 127.0.0.1:9050 .
#
#
# The public Tor network can't be used to reach your local network,
#
#
#
-#
# 5.3. forwarded-connect-retries
# ===============================
#
# manually. Start with a small value and check Privoxy's logfile
# from time to time, to see how many retries are usually needed.
#
+# Due to a bug, this option currently also causes Privoxy to
+# retry in case of certain problems with direct connections.
+#
# Examples:
#
# forwarded-connect-retries 1
forwarded-connect-retries 0
#
#
-# 5.4. accept-intercepted-requests
+# 6. MISCELLANEOUS
+# =================
+#
+# 6.1. accept-intercepted-requests
# =================================
#
# Specifies:
accept-intercepted-requests 0
#
#
-# 5.5. allow-cgi-request-crunching
+# 6.2. allow-cgi-request-crunching
# =================================
#
# Specifies:
allow-cgi-request-crunching 0
#
#
-# 5.6. split-large-forms
+# 6.3. split-large-forms
# =======================
#
# Specifies:
split-large-forms 0
#
#
-# 5.7. keep-alive-timeout
+# 6.4. keep-alive-timeout
# ========================
#
# Specifies:
#
# Effect if unset:
#
-# Connections are not reused.
+# Connections are not kept alive.
#
# Notes:
#
+# This option allows clients to keep the connection to Privoxy
+# alive. If the server supports it, Privoxy will keep the
+# connection to the server alive as well. Under certain
+# circumstances this may result in speed-ups.
+#
+# By default, Privoxy will close the connection to the server if
+# the client connection gets closed, or if the specified timeout
+# has been reached without a new request coming in. This behaviour
+# can be changed with the connection-sharing option.
+#
# This option has no effect if Privoxy has been compiled without
# keep-alive support.
#
+# Note that a timeout of five seconds as used in the default
+# configuration file significantly decreases the number of
+# connections that will be reused. The value is used because some
+# browsers limit the number of connections they open to a single
+# host and apply the same limit to proxies. This can result in a
+# single website "grabbing" all the connections the browser allows,
+# which means connections to other websites can't be opened until
+# the connections currently in use time out.
+#
+# Several users have reported this as a Privoxy bug, so the default
+# value has been reduced. Consider increasing it to 300 seconds
+# or even more if you think your browser can handle it. If your
+# browser appears to be hanging it can't.
+#
# Examples:
#
# keep-alive-timeout 300
#
-keep-alive-timeout 300
+keep-alive-timeout 5
+#
+#
+# 6.5. default-server-timeout
+# ============================
+#
+# Specifies:
+#
+# Assumed server-side keep-alive timeout if not specified by
+# the server.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# None
#
+# Effect if unset:
+#
+# Connections for which the server didn't specify the keep-alive
+# timeout are not reused.
+#
+# Notes:
#
-# 5.8. socket-timeout
+# Enabling this option significantly increases the number of
+# connections that are reused, provided the keep-alive-timeout
+# option is also enabled.
+#
+# While it also increases the number of connections problems when
+# Privoxy tries to reuse a connection that already has been closed
+# on the server side, or is closed while Privoxy is trying to
+# reuse it, this should only be a problem if it happens for the
+# first request sent by the client. If it happens for requests
+# on reused client connections, Privoxy will simply close the
+# connection and the client is supposed to retry the request
+# without bothering the user.
+#
+# Enabling this option is therefore only recommended if the
+# connection-sharing option is disabled.
+#
+# It is an error to specify a value larger than the
+# keep-alive-timeout value.
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support.
+#
+# Examples:
+#
+# default-server-timeout 60
+#
+#default-server-timeout 60
+#
+#
+# 6.6. connection-sharing
+# ========================
+#
+# Specifies:
+#
+# Whether or not outgoing connections that have been kept alive
+# should be shared between different incoming connections.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections are not shared.
+#
+# Notes:
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support, or if it's disabled.
+#
+# Notes:
+#
+# Note that reusing connections doesn't necessary cause
+# speedups. There are also a few privacy implications you should
+# be aware of.
+#
+# If this option is effective, outgoing connections are shared
+# between clients (if there are more than one) and closing the
+# browser that initiated the outgoing connection does no longer
+# affect the connection between Privoxy and the server unless
+# the client's request hasn't been completed yet.
+#
+# If the outgoing connection is idle, it will not be closed until
+# either Privoxy's or the server's timeout is reached. While
+# it's open, the server knows that the system running Privoxy is
+# still there.
+#
+# If there are more than one client (maybe even belonging to
+# multiple users), they will be able to reuse each others
+# connections. This is potentially dangerous in case of
+# authentication schemes like NTLM where only the connection
+# is authenticated, instead of requiring authentication for
+# each request.
+#
+# If there is only a single client, and if said client can keep
+# connections alive on its own, enabling this option has next to
+# no effect. If the client doesn't support connection keep-alive,
+# enabling this option may make sense as it allows Privoxy to keep
+# outgoing connections alive even if the client itself doesn't
+# support it.
+#
+# You should also be aware that enabling this option increases
+# the likelihood of getting the "No server or forwarder data"
+# error message, especially if you are using a slow connection
+# to the Internet.
+#
+# This option should only be used by experienced users who
+# understand the risks and can weight them against the benefits.
+#
+# Examples:
+#
+# connection-sharing 1
+#
+#connection-sharing 1
+#
+#
+# 6.7. socket-timeout
# ====================
#
# Specifies:
#
# Effect if unset:
#
-# A default value of 180 seconds is used.
+# A default value of 300 seconds is used.
+#
+# Notes:
+#
+# For SOCKS requests the timeout currently doesn't start until
+# the SOCKS server accepted the request. This will be fixed in
+# the next release.
#
# Examples:
#
-# socket-timeout 180
+# socket-timeout 300
+#
+socket-timeout 300
+#
+#
+# 6.8. max-client-connections
+# ============================
+#
+# Specifies:
+#
+# Maximum number of client connections that will be served.
+#
+# Type of value:
+#
+# Positive number.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections are served until a resource limit is reached.
+#
+# Notes:
+#
+# Privoxy creates one thread (or process) for every incoming
+# client connection that isn't rejected based on the access
+# control settings.
+#
+# If the system is powerful enough, Privoxy can theoretically deal
+# with several hundred (or thousand) connections at the same time,
+# but some operating systems enforce resource limits by shutting
+# down offending processes and their default limits may be below
+# the ones Privoxy would require under heavy load.
+#
+# Configuring Privoxy to enforce a connection limit below the
+# thread or process limit used by the operating system makes
+# sure this doesn't happen. Simply increasing the operating
+# system's limit would work too, but if Privoxy isn't the only
+# application running on the system, you may actually want to
+# limit the resources used by Privoxy.
+#
+# If Privoxy is only used by a single trusted user, limiting the
+# number of client connections is probably unnecessary. If there
+# are multiple possibly untrusted users you probably still want
+# to additionally use a packet filter to limit the maximal number
+# of incoming connections per client. Otherwise a malicious user
+# could intentionally create a high number of connections to
+# prevent other users from using Privoxy.
+#
+# Obviously using this option only makes sense if you choose a
+# limit below the one enforced by the operating system.
+#
+# Examples:
+#
+# max-client-connections 256
+#
+#max-client-connections 256
+#
+#
+# 6.9. handle-as-empty-doc-returns-ok
+# ====================================
+#
+# Note:
+#
+# This is a work-around for Firefox bug 492459: " Websites are no
+# longer rendered if SSL requests for JavaScripts are blocked by
+# a proxy. " (https:/ /bugzilla.mozilla.org/show_bug.cgi?id=492459)
+#
+# Specifies:
+#
+# The status code Privoxy returns for pages blocked with
+# +handle-as-empty-document.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy returns a status 403(forbidden) for all blocked pages.
+#
+# Effect if set:
+#
+# Privoxy returns a status 200(OK) for pages blocked with
+# +handle-as-empty-document and a status 403(Forbidden) for all
+# other blocked pages.
#
-socket-timeout 180
+handle-as-empty-doc-returns-ok 1
#
#
-# 6. WINDOWS GUI OPTIONS
+# 7. WINDOWS GUI OPTIONS
# =======================
#
# Privoxy has a number of options specific to the Windows GUI