# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.147 2006/09/13 01:25:16 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.162 2008/03/30 13:31:42 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 - 2004 the SourceForge
+# Written by and Copyright (C) 2001 - 2007 the SourceForge
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
@STATIC_PCRE_ONLY@ -Ipcre
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
# fi
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# anonymously ncftps the rpms to sourceforge
#
# Documentation
#
-# converts doc/source/*.sgml into html, text and man pages
+# converts doc/source/*.sgml into html, text, pdf and man pages
#
#############################################################################
$(RM) -r doc/source/developer-manual
mkdir -p doc/text doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
+ cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && env -u LANG $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
# user manual
dok-user:
@# for all doc set-ups, including the 'user manual' config option in local \
@#system where it MUST be in same directory as html.
$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
- cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
+ cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && env -u LANG $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
# faq
dok-faq:
$(RM) -r doc/source/faq
mkdir -p doc/text doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
+ cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && env -u LANG $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
# man page, one variation. Try to use the next target, just 'make man'.
dok-man:
# readme page and INSTALL file
dok-readme: dok-release
cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
- $(WDUMP) tmp.html > ../../README ;\
+ env -u LANG $(WDUMP) tmp.html > ../../README ;\
$(DB)-notoc -V nochunks install.sgml > tmp.html &&\
- $(WDUMP) tmp.html > ../../INSTALL ;\
+ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
$(RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
## Make AUTHORS file
dok-authors:
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
# NOTE: This will require some hand editing. The new file is outputted
# as config.new so that problem sections can be compared to previous
# version. This is hardcored to w3m for html/text conversion. Also,
-# requires the shell util 'fmt'.
+# requires the shell util 'fmt'. 2007-11-14: note the perl below dies
+# with perl 5.8.8. The same code pasted into a free standing script,
+# without the makefile-isms, works fine.
config-file: dok-release
cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
w3m -dump __tmp.html |fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
- /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
- $$header_len=0 unless $$hit_header;\
- if ($$hit_header) {\
- print "# ";\
- for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
- print "\n";\
- };\
- $$hit_header=0;\
- $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
- $$header_len = length($$_);\
- s/^/# /; /^# #{12,}/ && s/^# #/####/;\
- s/^.*$$// if $$hit_option;\
- $$hit_option=0;\
- s/^\n//; s/^#\s*-{20,}//; s/ *$$//;\
- $$hit_option=1 if s/^#\s+@@//;' config.new
+ $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
+ /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
+ my $$hit_header;\
+ $$header_len=0 unless $$hit_header;\
+ if ($$hit_header) {\
+ print "# ";\
+ for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
+ print "\n";\
+ };\
+ my $$hit_header;\
+ $$hit_header=0;\
+ $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
+ $$header_len = length($$_);\
+ s/^/# /; /^# #{12,}/ && s/^# #/####/;\
+ s/^.*$$// if $$hit_option;\
+ $$hit_option=0;\
+ s/^\n//; s/^#\s*-{20,}//; s/ *$$//;\
+ $$hit_option=1 if s/^#\s+@@//;' config.new
+
$(RM) *.bak
@$(ECHO) "****************************************************"
@$(ECHO) "The output file is config.new."
#############################################################################
actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@else
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
+@AMIGAOS_ONLY@endif
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
@$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
$(CHMOD) $(DIR_MODE) $(MKDIR)
- @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
- $(LOG_DEST) $(PID_DEST)
+ @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
+ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
+ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
@# Install the executable binary, strip if invoked as install-strip
@test -n "$(STRIP)" &&\
$(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
- $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
- $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
+ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
@# Install the DOCS and man page. install-sh only does one file at a time.
@# FIXME: only handles jpegs.
else \
DOC=$(prefix)/doc/privoxy ;\
fi;\
- $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
- $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
+ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
+ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
if [ -d "$(DOK_WEB)" ]; then \
- $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
+ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
for i in user-manual developer-manual faq; do \
for ii in $(DOK_WEB)/$$i/*html; do \
- $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
+ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
done ;\
done ;\
for i in $(DOK_WEB)/user-manual/*jpg; do \
- $(INSTALL) $(INSTALL_T) $$i $$DOC/user-manual;\
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
done ;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
- $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
- $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
- $(INSTALL) $(INSTALL_T) README $$DOC;\
- $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC/user-manual;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
- @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
- -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
- $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
- $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.tmp
+ $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
-@if [ $(check_doc) = 0 ]; then \
$(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
else \
@# Install the config support files. Test for root install, and abort
@# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
- @$(ECHO) Installing templates to $(CONF_DEST)/templates
+ @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
- $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
done
@# FIXME: group/user validation is overly convoluted.
fi ;\
INSTALL_CONF="$(INSTALL_R)" ;\
fi ;\
- $(ECHO) Installing configuration files to $(CONF_DEST);\
+ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
for i in $(CONFIGS); do \
- if [ "$$i" == "default.action" ] || [ "$$i" == "default.filter" ] || [ "$$i" == "standard.action" ]; then \
- $(RM) $(CONF_DEST)/$$i ;\
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] || [ "$$i" = "standard.action" ]; then \
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
$(ECHO) Installing fresh $$i;\
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
elif [ -s "$(CONF_DEST)/$$i" ]; then \
$(ECHO) Installing $$i as $$i.new ;\
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
NEW=1;\
else \
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
fi ;\
done ;\
if [ -n "$$NEW" ]; then \
- $(CHMOD) $(RWD_MODE) $(CONF_DEST)/*.new || exit 1 ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
$(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
fi ;\
- [ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
- $(ECHO) Checking logfiles in $(LOG_DEST) ;\
- $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || exit 1 ;\
if [ x$$USER != x ]; then \
- $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
if [ x$$GROUP_T != x ]; then \
- $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
- $(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || exit 1 ;\
if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
$(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
- $(SED) 's+%USER%+$$USER+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
$(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
- $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
$(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
$(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
$(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
- $(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
- $(MKDIR) /etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
- $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
+ $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
+ $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
+ $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
- $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
fi ;\
else \
$(ECHO) "No init script installed, install it manually if needed" ;\
$(RM) config.base config.tmp
@# mmmmm, good.
@$(ECHO) "$(PROGRAM_V) installation succeeded!"
- @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
# rmdir is used as a precaution since it will not remove non-empty
# directories. RH init script creates lock file and pid file.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
- -@if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
- /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
+ @# XXX: the chkconfig line may need a DESTDIR prefix.
+ -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
+ $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
chkconfig --del $(PROGRAM) 2>/dev/null;\
fi
- -@test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid` || :
- -@test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) /var/run/privoxy.pid ` || :
+ -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
+ -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
@# Program binary
@$(ECHO) Removing $(PROGRAM) binary
- $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+ $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
@# config files and dir, and maybe old install backups
- -@if [ -d $(CONF_DEST) ]; then \
- $(ECHO) Saving $(PROGRAM) config files to /tmp/$(PROGRAM)-save ;\
- $(MKDIR) /tmp/$(PROGRAM)-save ;\
- cd $(CONF_DEST) ;\
- for i in $(CONFIGS); do \
- [ -f $$i ] && $(CP) $$i /tmp/$(PROGRAM)-save ;\
+ -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ cd $(DESTDIR)$(CONF_DEST) ;\
+ for i in $(DESTDIR)$(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
done ;\
fi
@$(ECHO) Removing $(PROGRAM) config files
- -@for i in $(CONFIGS); do \
+ -@for i in $(DESTDIR)$(CONFIGS); do \
test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
- $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
done
- -@test -d $(CONF_DEST)/templates && $(RM) -r $(CONF_DEST)/templates &&\
- $(ECHO) "Removing $(CONF_DEST)/templates/*"
+ -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(MAN_DEST)/privoxy.1*
- -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
+ -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
@# Log and jarfile and pidfile
@$(ECHO) Removing $(PROGRAM) logs
- -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid $(DESTDIR)$(LOG_DEST)/jarfile
@# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
@$(ECHO) Removing $(PROGRAM) directories
- @for i in $(LOG_DEST) $(CONF_DEST); do \
+ @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done
@if [ ! "$(prefix)" = "/usr/local" ] ;then \
- for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
+ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
+ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done;\
- if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
- $(ECHO) Removing $(prefix)/var/log ;\
- $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
fi ;\
- if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
- $(ECHO) Removing $(prefix)/var/run ;\
- $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
fi ;\
- if test $(prefix)/var != /var && test -d $(prefix)/var; then \
- $(ECHO) Removing $(prefix)/var ;\
- $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
fi ;\
- if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
- $(ECHO) Removing $(prefix) ;\
- $(ECHO) Removing installation directory $(prefix) ;\
- $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
+ $(ECHO) Removing $(DESTDIR)$(prefix) ;\
+ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
+ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
fi;\
fi
@# init scripts and logrotate
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
- if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
- $(RM) /etc/rc.d/rc.privoxy ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(RM) /etc/init.d/privoxy ;\
+ if [ -f $(DESTDIR)/etc/slackware-version ] && \
+ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
+ elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
+ && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
$(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
fi ;\
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.162 2008/03/30 13:31:42 fabiankeil
+# Add DESTDIR support for the uninstall target.
+#
+# Revision 1.161 2008/03/30 13:19:13 fabiankeil
+# Add DESTDIR support for the install target. Closes PR#1910612.
+# Patch by Radoslaw Zielinski with minor modifications.
+#
+# Revision 1.160 2008/03/27 18:27:19 fabiankeil
+# Remove kill-popups action.
+#
+# Revision 1.159 2008/03/21 11:13:53 fabiankeil
+# Only gather host information if it's actually needed.
+# Also move the code out of accept_connection() so it's less likely
+# to delay other incoming connections if the host is misconfigured.
+#
+# Revision 1.158 2007/12/11 21:29:25 fabiankeil
+# Fix dependency list for cgiedit.c.
+#
+# Revision 1.157 2007/12/10 02:28:02 hal9
+# Unset $LANG for text processing of docs so we get pure text.
+#
+# Revision 1.156 2007/11/15 03:17:43 hal9
+# Some workaround changes to the config file perl stuff and comments, which is
+# broken here all by itself on perl 5.8.8.
+#
+# Revision 1.155 2007/09/22 16:23:25 fabiankeil
+# Update copyright line.
+#
+# Revision 1.154 2007/02/07 11:52:40 fabiankeil
+# Fix suse-dist as described in BR#1654052.
+# (I didn't test it, but it's done the same
+# way in redhat-dist which is known to work).
+#
+# Revision 1.153 2007/01/07 07:36:36 joergs
+# Added AmigaOS4 support.
+#
+# Revision 1.152 2006/12/13 14:53:51 etresoft
+# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
+#
+# Revision 1.151 2006/11/30 01:08:55 hal9
+# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
+#
+# Revision 1.150 2006/10/25 11:55:45 fabiankeil
+# Fix sed regexes for rewriting "confdir ." and "logdir .".
+# Thanks to Darel Henman for reporting this.
+#
+# Revision 1.149 2006/10/11 01:40:28 hal9
+# Apply patch from Neil McCalden to fix syntax issue.
+#
+# Revision 1.148 2006/09/26 10:57:58 hal9
+# Including Karsten's patch to fix make create-snapshot.
+#
# Revision 1.147 2006/09/13 01:25:16 hal9
# Make sure install forces in new default.action, default.filter, and
# standard.filter. These are privoxy files, not user files.