# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.179 2009/02/22 14:48:31 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.195 2011/01/22 12:33:11 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 - 2008 the SourceForge
+# Written by and Copyright (C) 2001-2010 members of the
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = ""
-SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
+SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
#############################################################################
SBIN_DEST = @sbindir@
MAN_DIR = @mandir@
MAN_DEST = $(MAN_DIR)/man1
+MAN_PAGE = privoxy.1
SHARE_DEST = @datadir@
DOC_DEST = $(SHARE_DEST)/doc/privoxy
VAR_DEST = @localstatedir@
SED = sed
GREP = grep
CAT = cat
-RPM = rpm
-RPMBUILD = rpmbuild
MV = mv
TAR = tar
LN = ln
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
+# If your SF user name differs from your local one,
+# change this to "ssh -l sf-username"
+SSH = ssh
#############################################################################
-# Setup for make distribution rh and suse for now
+# Setup for make distribution for now.
#############################################################################
-TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
+TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
#############################################################################
# We include these files in our distributions
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
- privoxy.1
+ $(MAN_PAGE)
#############################################################################
# Filenames and libraries
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
+.PHONY: all inifiles solaris-dist \
+win-dist tarball-dist dok webserver clean clobber tags \
+install CONF_DEST LOG_DEST \
PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Strip master copy comments from default.action:
#############################################################################
default.action: default.action.master
- $(GREP) -v '^#MASTER#' $< > $@
+ $(GREP) -v '^#MASTER#' default.action.master > $@
#############################################################################
# Win32 config files
# tar.gz with the current date in the name and as a releasenumber in the
# spec-file. But the main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
-# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+# This creates a tar.gz.
#############################################################################
create-snapshot:
@tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
cd $$TMPDIR/current; \
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi;\
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi; \
- $(RM) $$TMPFILE; \
- cd $$TMPDIR/current; \
$(TAR) --exclude ".cvsignore" --exclude "CVS" \
-czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
$(RM) -rf $$TMPDIR
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
# example: if the Makefile has the sticky tag v_2_9_13, you'll get
-# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
-# Red Hat and one for SuSe (different spec-files)
+# privoxy-*-2.4.13.tar.gz.
#############################################################################
create-archive:
make SNAPVERSION=$(SNAPVERSION) create-snapshot
-#############################################################################
-# RPM specifice stuff (SuSE or Redhat, ..)
-#############################################################################
-rpm-stuff: dist-check clean clobber
- for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit 1; \
- fi; \
- done; \
-
-check-release:
- @if [ "$(RPM_PACKAGEV)" = "" ]; then \
- echo ; \
- echo " ERROR: NO RPM_PACKAGEV VALUE"; \
- echo " No value given for RPM_PACKAGEV. Please use:"; \
- echo " make dist-upload RPM_PACKAGEV=release"; \
- echo " where \"release\" is the release number you want to and"; \
- echo " where \"dist\" is the name of the distro (redhat or suse)"; \
- echo ; \
- echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
- echo ""; \
- echo "ATTENTION: If your distribution use a specific tag on the"; \
- echo " release field (like \"cl\" for Conectiva, and"; \
- echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
- echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
- echo " Do it like you would do for a redhat package,"; \
- echo " (i.e. just the number)."; \
- echo ; \
- exit 1; \
- fi
-
-
-#############################################################################
-# Create Conectiva specfile from RedHat specfile
-#############################################################################
-conectiva-spec:
- $(RM) privoxy-cl.spec
- chmod a+x genclspec.sh
- ./genclspec.sh
-
-#############################################################################
-# Conectiva distribution for x86
-#############################################################################
-conectiva-dist: rpm-stuff conectiva-spec
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-conectiva-upload: check-release
- make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
-
-#############################################################################
-# redhat distribution alpha and x86
-#############################################################################
-redhat-dist: rpm-stuff
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# For testing build issues only! Use redhat-dist for official releases.
-redhat-test:
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -tb $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
- @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
-
-# anonymously ncftps the rpms to sourceforge
-redhat-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
-
-
-#############################################################################
-# Creates a Red Hat sourcepackage from CVS (not from the current sources
-# on disk)
-#############################################################################
-redhat-srpm:
- make create-archive
- $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
-
-
-#############################################################################
-# suse distribution. works fine. no need to be root.
-#############################################################################
-suse-dist: rpm-stuff
-# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
-# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
-# privoxy-suse.spec > $$TMPFILE ; then \
-# $(MV) -f $$TMPFILE privoxy-suse.spec; \
-# else \
-# $(ECHO) "Could not set version info in specfile."; \
-# exit 1;\
-# fi
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# anonymously ncftps the rpms to sourceforge
-suse-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
-
-# handle with care. use with root.
-suse-clean:
- $(RPM) -e junkbuster-suse || true
- $(RM) -r /etc/junkbuster
- $(RM) -r /etc/rc.d/junkbuster*
- $(RM) -r /var/run/junkbuster.pid
- $(RM) -r /var/log/junkbuster
- $(RM) /etc/init.d/junkbuster
- $(RM) /usr/sbin/junkbuster
- $(RM) /usr/sbin/rcjunkbuster
- $(RM) /usr/share/man/man1/junkbuster.1.gz
- $(RPM) -e privoxy-suse || true
- $(RM) -r /etc/privoxy
- $(RM) -r /etc/rc.d/privoxy*
- $(RM) -r /var/run/privoxy.pid
- $(RM) -r /var/log/privoxy
- $(RM) /etc/init.d/privoxy
- $(RM) /usr/sbin/privoxy
- $(RM) /usr/sbin/rcprivoxy
- $(RM) /usr/share/man/man1/privoxy.1.gz
-
#############################################################################
# generic distribution
#############################################################################
gen-clean:
$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
-#############################################################################
-# solaris distribution. verified on SF machines by swa.
-#############################################################################
-solaris-dist: gen-dist
- @$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-solaris-upload: gen-upload
- @$(ECHO) Done.
-# use with care
-solaris-clean: gen-clean
- @$(ECHO) Done.
-
-#############################################################################
-# hpux distribution
-#############################################################################
-hpux-dist:
- @$(ECHO) coming soon.
-hpux-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# debian distribution
-#############################################################################
-debian-dist:
- @$(ECHO) coming soon.
-debian-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# macosx distribution
-#############################################################################
-macosx-dist:
- @$(ECHO) coming soon.
-macosx-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# amiga distribution
-#############################################################################
-amiga-dist:
- @$(ECHO) coming soon.
-amiga-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# freebsd distribution. verified on SF machines by swa.
-#############################################################################
-freebsd-dist: gen-dist
- @$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-freebsd-upload: gen-upload
- @$(ECHO) Done.
-# use with care
-freebsd-clean: gen-clean
- @$(ECHO) Done.
-
-#############################################################################
-# Windows distribution
-#############################################################################
-win-dist:
- $(ECHO) Not implemented.
-
-
#############################################################################
# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
# (FIXME:) only parts of the static / generated docs mix in doc/webserver
# man page, one variation. Try to use the next target, just 'make man'.
dok-man:
$(RM) doc/man/* doc/webserver/man-page/*.html
-ifneq ($(MAN2HTML),false)
+ ifneq ($(MAN2HTML),false)
$(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
- man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
+ man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
$(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
-else
+ else
$(MAKE) groff2html
-endif
+ endif
# Build man page from sgml. This requires the SGMLSpm perl module.
# See CPAN, or your favorite perl repository. This is the preferred
man: dok-release
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
- perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
- perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
- perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
- perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
- perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
- perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
- $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' $(MAN_PAGE) ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE)
# For those with man2html ala RH7s.
man2html:
mkdir -p doc/webserver/man-page
-ifneq ($(MAN2HTML),false)
- $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
+ ifneq ($(MAN2HTML),false)
+ $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html
$(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
$(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
# Twice because my version of man2html is pulling in commas and periods in URLs.
$(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
# Get rid of spurious \a from conversion. (How to do this with perl?)
$(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
-else
+ else
$(MAKE) groff2html
-endif
+ endif
# Otherwise we get plain groff conversion.
groff2html:
- $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+ $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
# readme page and INSTALL file
dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
@$(ECHO) Documentation created.
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
- @$(ECHO) Documentation created.
-
-## Make README
-redhat-readme:
- cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../README && $(RM) -r tmp.html
-
## Make AUTHORS file
dok-authors:
cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
-ifeq ($(CODE_STATUS),stable)
+ ifeq ($(CODE_STATUS),stable)
@$(ECHO) Setting docs to stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
-else
+ else
@$(ECHO) Setting docs to not stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
-endif
+ endif
# Create release announcement in text and html, with short and long versions.
# This is a standalone target, and must be invoked directly.
webserver: tidy
@$(ECHO) -------------------------------------------------------
@$(ECHO) You will need to "create" a SF shell first:
- @$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create
+ @$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create
@$(ECHO) Please make sure your documentation files are up to date.
- @$(ECHO) Note that this command updates the home page and scps
+ @$(ECHO) Note that this command updates the home page and copys
@$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
- @$(ECHO) You will also need to change the user-manual symlink manually.
+ @$(ECHO) Note that a botched upload can result in the documentation
+ @$(ECHO) on the website becoming unreachable! Also the CSS files
+ @$(ECHO) currently seem to end up at the wrong place.
@$(ECHO) -------------------------------------------------------
+ @$(ECHO) Replacing the user-manual symlink
+ @$(SSH) shell.sourceforge.net "cd /home/groups/i/ij/ijbswa/htdocs && rm user-manual \
+ && mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual"
+
@$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
@$(ECHO) Fixing permissions
- @ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
- @ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
- @ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
-
+ @$(SSH) shell.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
web-actions: tidy
@$(ECHO) Uploading
@cd doc/webserver/actions; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+ $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
@$(ECHO) Fixing permissions
- @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
- @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+ @$(SSH) ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
+ @$(SSH) ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
##
dok-put:
-czf $(DOC_FILE) ;\
$(ECHO) "Uploading doc package ..." ;\
scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
- @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
+ @$(SSH) ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
$(RM) $(DOC_FILE)
dok-get:
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
+w32.res: w32.rc w32res.h icons/radar-01.ico icons/radar-02.ico icons/radar-03.ico icons/radar-04.ico icons/radar-05.ico icons/radar-06.ico icons/radar-07.ico icons/radar-08.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
+ `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
tidy:
$(RM) `find . -name "*~"`
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
- @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
- -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
+ -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
$(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
- $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
- $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
- $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
- $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
- $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
- $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
@# XXX: the chkconfig line may need a DESTDIR prefix.
- -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
- $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
- chkconfig --del $(PROGRAM) 2>/dev/null;\
- fi
-@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
$(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
-@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)*
-$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
@# Log and pidfile
fi;\
fi
- @# init scripts and logrotate
+ @# init scripts
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
if [ -f $(DESTDIR)/etc/slackware-version ] && \
[ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
$(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
- elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
- && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
- $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
-e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
-e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
-e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
-
-#############################################################################
-
-## Local Variables:
-## tab-width: 3
-## end:
-
-# $Log: GNUmakefile.in,v $
-# Revision 1.179 2009/02/22 14:48:31 hal9
-# Updates to the 'make webserver' target that recreates the home page and uploads
-# fresh documents to reflect new SF realities, and more explanation of process.
-#
-# Revision 1.178 2009/02/08 18:35:48 fabiankeil
-# Move the match-all section into a separate file
-# (match-all.action) so we can safely overwrite the
-# default actions when updating. Based on Roland's
-# patch #1563977.
-#
-# Revision 1.177 2009/01/13 16:44:32 fabiankeil
-# Delete the standard.action file after moving
-# the pre-settings over to the default actions.
-#
-# Revision 1.176 2008/09/21 13:24:37 fabiankeil
-# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
-#
-# Revision 1.175 2008/08/30 12:03:07 fabiankeil
-# Remove FEATURE_COOKIE_JAR.
-#
-# Revision 1.174 2008/07/18 17:50:47 fabiankeil
-# Fix whitespace.
-#
-# Revision 1.173 2008/06/18 18:28:42 fabiankeil
-# Remove PDF-related stuff.
-#
-# Revision 1.172 2008/06/17 16:16:08 fabiankeil
-# - Stop building text files nobody cares about.
-# - Update copyright year.
-#
-# Revision 1.171 2008/06/13 15:24:57 fabiankeil
-# Move previously inline'd Perl code for the config-file target
-# into a separate file, have it work with older perl releases,
-# clean it up a bit and fix the "underlining" code.
-#
-# Revision 1.170 2008/06/12 16:38:50 fabiankeil
-# Add third-level domain to URL in dok-get target.
-#
-# Revision 1.169 2008/06/09 17:28:31 fabiankeil
-# - Recommend https for releasing files.
-# - Fix a warning about datarootdir being ignored.
-#
-# Revision 1.168 2008/05/23 18:03:12 fabiankeil
-# - Shorten meta description inserted in dok-webserver
-# and dok-index target.
-# - In config-file target, unset LANG for w3m as we
-# might otherwise end up with multi-byte characters.
-#
-# Revision 1.167 2008/05/23 14:39:09 fabiankeil
-# Silence dok-user complaint about @# not being found.
-#
-# Revision 1.166 2008/05/23 14:04:57 fabiankeil
-# - Get config-file target working with more recent Perl
-# versions. The generated file is still messed up, though.
-# - Fix comment typo.
-#
-# Revision 1.165 2008/05/22 16:57:23 fabiankeil
-# Fix coffee machine.
-#
-# Revision 1.164 2008/05/22 10:26:26 fabiankeil
-# - Remove parsers.@OBJEXT@'s dependency on encode.h.
-# - Include Emacs backup files in tidy target again.
-#
-# Revision 1.163 2008/05/04 18:01:53 fabiankeil
-# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
-#
-# Revision 1.162 2008/03/30 13:31:42 fabiankeil
-# Add DESTDIR support for the uninstall target.
-#
-# Revision 1.161 2008/03/30 13:19:13 fabiankeil
-# Add DESTDIR support for the install target. Closes PR#1910612.
-# Patch by Radoslaw Zielinski with minor modifications.
-#
-# Revision 1.160 2008/03/27 18:27:19 fabiankeil
-# Remove kill-popups action.
-#
-# Revision 1.159 2008/03/21 11:13:53 fabiankeil
-# Only gather host information if it's actually needed.
-# Also move the code out of accept_connection() so it's less likely
-# to delay other incoming connections if the host is misconfigured.
-#
-# Revision 1.158 2007/12/11 21:29:25 fabiankeil
-# Fix dependency list for cgiedit.c.
-#
-# Revision 1.157 2007/12/10 02:28:02 hal9
-# Unset $LANG for text processing of docs so we get pure text.
-#
-# Revision 1.156 2007/11/15 03:17:43 hal9
-# Some workaround changes to the config file perl stuff and comments, which is
-# broken here all by itself on perl 5.8.8.
-#
-# Revision 1.155 2007/09/22 16:23:25 fabiankeil
-# Update copyright line.
-#
-# Revision 1.154 2007/02/07 11:52:40 fabiankeil
-# Fix suse-dist as described in BR#1654052.
-# (I didn't test it, but it's done the same
-# way in redhat-dist which is known to work).
-#
-# Revision 1.153 2007/01/07 07:36:36 joergs
-# Added AmigaOS4 support.
-#
-# Revision 1.152 2006/12/13 14:53:51 etresoft
-# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
-#
-# Revision 1.151 2006/11/30 01:08:55 hal9
-# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
-#
-# Revision 1.150 2006/10/25 11:55:45 fabiankeil
-# Fix sed regexes for rewriting "confdir ." and "logdir .".
-# Thanks to Darel Henman for reporting this.
-#
-# Revision 1.149 2006/10/11 01:40:28 hal9
-# Apply patch from Neil McCalden to fix syntax issue.
-#
-# Revision 1.148 2006/09/26 10:57:58 hal9
-# Including Karsten's patch to fix make create-snapshot.
-#
-# Revision 1.147 2006/09/13 01:25:16 hal9
-# Make sure install forces in new default.action, default.filter, and
-# standard.filter. These are privoxy files, not user files.
-#
-# Revision 1.146 2006/09/08 23:57:19 hal9
-# User manual images are now user-manual doc directory, and fix make install
-# target accordingly.
-#
-# Revision 1.145 2006/09/08 02:32:00 hal9
-# Various changes to implement building and installing docs to be compatible
-# with the new "user-manual" settings in config from Roland. Docbook does not
-# seem to like dealing with more than one css file, so workaround that here.
-# Change 'make install' so it provides p_doc.css in the user-manual doc
-# directory so that functions well, and lastly modify 'make install' so that the
-# PATH is automatically set, and the 'user-manual' directive should done during
-# the install.
-#
-# Revision 1.144 2006/09/07 22:53:20 hal9
-# Make sure config sgml build related artifacts are cleaned out.
-#
-# Revision 1.143 2006/09/02 15:59:40 hal9
-# Add to code status to make install output.
-#
-# Revision 1.142 2006/08/29 01:46:24 hal9
-# Add user.filter to $CONFIGS.
-#
-# Revision 1.141 2006/08/12 03:54:37 david__schmidt
-# Windows service integration
-#
-# Revision 1.140 2006/07/18 14:48:45 david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
-# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
-# only place it is used.
-#
-# Revision 1.104.2.27 2004/02/07 16:11:10 oes
-# Make clobber remove the autom4te.cache dir.
-# Closes BR #889300
-#
-# Revision 1.104.2.26 2004/01/31 16:32:25 oes
-# Adding a check for an htmldoc variant from the debian diff
-#
-# Revision 1.104.2.25 2004/01/31 01:15:33 oes
-# Fixed a typo; updated copyright notice
-#
-# Revision 1.104.2.24 2003/12/03 10:30:02 oes
-# - Added new dependency: actions.c -> ssplit.h
-# - Excluded PDF docs from src tarball
-#
-# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
-# Strip trailing spaces from config-file generation, bug #724596.
-#
-# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
-# Minor changes for Privoxy home page:
-# - Handle © more sanely
-# - include link to announce.txt
-# Also, disable 'make announce' target.
-#
-# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
-# Catch up with main trunk install/uninstall. Quiet output, etc.
-#
-# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
-# Port of make install, etc from main trunk. Needs testing! Add Slackware
-# support, and other related changes. Update related docs.
-#
-# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
-# New user-manual examples in config-file are getting wrapped. Add warning.
-#
-# Revision 1.104.2.18 2002/08/23 12:22:40 oes
-# Added warning to broken install target
-#
-# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
-# More (minor) cleanup of html before pdf processing to make some relative
-# links work as pdf -> pdf. Upload pdf as zip archive now.
-#
-# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
-# Added pdf docs to make webserver target.
-#
-# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
-# New targets for man page (make man) and pdf (make dok-pdf) targets.
-#
-# Revision 1.104.2.14 2002/08/10 11:19:37 oes
-# - Make -Ipcre (again) conditional on STATIC_PCRE
-# - $(RPMBUILD) -> $(RPM) for SuSE
-# - Add dependency: pcrs.o deps on config.h
-#
-# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
-# Remove pdf2 target, and make it dok-shtml (single page html for pdf
-# conversion).
-#
-# Revision 1.104.2.12 2002/08/06 11:29:36 oes
-# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
-#
-# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
-# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
-# *I think* it was supposed to be (was breaking upload targets since it was
-# set to RPM_VERSION).
-#
-# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
-# cleanups of the redhat-srpm target
-#
-# Revision 1.104.2.9 2002/07/26 15:17:02 oes
-# - Added generation of default.action from defaul.action.master
-# - Deleted obsolete re_filterfile.txt generation
-#
-# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
-# added helper targets to the makefile. They shouldn't break anything, but
-# make my life a lot easier.
-#
-# The new rpm has been splitted into two parts, one for package installation/
-# removal, one for package building.
-# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
-# by rpmbuild -ta (this is backwards compatible)
-#
-# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
-# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
-# thus breaking them completely.
-#
-# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
-# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
-# index.html and team/index.html)
-#
-# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
-# This is more cleanup on the make config-file target. Most issues for
-# automatic generation are taken care of. There are still some problems
-# that require hand editing. Namely, some of the examples that are > 80 chars.
-#
-# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
-# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
-# new target is 'make config-file', _not_ make config.
-#
-# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
-# 'make config' target added (WIP) for future generation of config file from
-# text in u-m so the two are in sync. New generated config, which requires
-# some hand editing for the time being.
-#
-# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
-# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
-# not being cleaned up in doc/webserver.
-#
-# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
-# Remove Table of Contents from readme with oes's dsl trick.
-#
-# Revision 1.104 2002/05/24 00:03:49 oes
-# Use p_doc.css for the Homepage for consistency
-#
-# Revision 1.103 2002/05/23 23:19:00 oes
-# Use dsl without TOC for the homepage
-#
-# Revision 1.102 2002/05/16 01:20:17 hal9
-# make announce target added.
-#
-# Revision 1.101 2002/05/15 12:28:46 oes
-# Trying to keep Hal happy :)
-#
-# Revision 1.100 2002/05/08 13:48:18 hal9
-# Ooops, that trashed JB v2.0.2 comment. Fixed.
-#
-# Revision 1.99 2002/05/08 13:42:07 hal9
-# This fixes the numbering problem on index.html in contact info section (.1.). Using
-# perl, since its way too convoluted to try to fix proper with docbook.
-#
-# Revision 1.98 2002/05/03 14:33:06 oes
-# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
-#
-# Revision 1.97 2002/04/27 20:27:43 swa
-# no longer needed due to new
-# PACKAGE_VERSION process
-#
-# Revision 1.96 2002/04/27 17:44:32 morcego
-# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
-# - Using the RM macro everywhere rm is called (either we use, or don't)
-# - Same for RPM
-#
-# Revision 1.95 2002/04/27 15:37:25 swa
-# replacing directory in document creation process
-# no longer necessary.
-#
-# Revision 1.94 2002/04/27 08:23:29 swa
-# pdf process reviewed and cleaned up
-#
-# Revision 1.93 2002/04/27 04:55:53 morcego
-# privoxy-cl.spec now gets removed by clobber target
-#
-# Revision 1.92 2002/04/27 04:53:40 morcego
-# Adding --exclude "PACKAGERS" to every tar command that applies (not for
-# webserver target)
-#
-# Revision 1.91 2002/04/27 04:44:51 morcego
-# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
-# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
-# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
-# conectiva-upload
-# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
-# for Conectiva Linux
-#
-# Revision 1.90 2002/04/26 17:46:53 swa
-# be consistent
-#
-# Revision 1.89 2002/04/26 17:20:54 swa
-# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
-#
-# Revision 1.88 2002/04/25 19:13:57 morcego
-# Removed RPM release number declaration on configure.in
-# Changed makefile to use given value for RPM_PACKAGEV when on uploading
-# targets (will produce an error, explaining who to do it, if no value
-# if provided).
-#
-# Revision 1.87 2002/04/23 14:10:59 swa
-# now create pdf documents
-#
-# Revision 1.86 2002/04/15 04:30:27 hal9
-# Missed two -pi.bak's on perl/cygwin problem.
-#
-# Revision 1.85 2002/04/14 01:05:34 hal9
-# Revert dok-webserver change for SF logo.
-#
-# Revision 1.84 2002/04/13 22:43:25 hal9
-# -Fix dok-webserver for SF logo (more perl).
-# -Change all perl -pi to perl -pi.bak for Cygwin problem.
-#
-# Revision 1.83 2002/04/12 09:39:25 oes
-# Excluding yet more files from tarball; making dist warning yet more scary
-#
-# Revision 1.82 2002/04/11 21:07:11 oes
-# Excluding more files from tarball build
-#
-# Revision 1.81 2002/04/11 14:40:27 oes
-# Fixed typo -- Thanks, Moritz!
-#
-# Revision 1.80 2002/04/11 12:50:00 oes
-# Fixed tarball-dist target
-#
-# Revision 1.79 2002/04/11 06:49:28 oes
-# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
-#
-# Revision 1.78 2002/04/09 13:37:11 sarantis
-# fix tar options typo
-#
-# Revision 1.77 2002/04/09 13:28:53 swa
-# build suse and gen-dist with html docs
-#
-# Revision 1.76 2002/04/08 22:43:41 oes
-# Fix: Include dotfiles in fixing webserver permissions
-#
-# Revision 1.75 2002/04/08 22:14:59 oes
-# Silencing tar warnings in the web* targets
-#
-# Revision 1.74 2002/04/08 15:22:44 hal9
-# This has finishing touches for dok building. Should be ready to go.
-# -The main doc build is now 'make dok', should work on Redhat too.
-# -Removed man page from main doc build. It is built separately due to
-# perl scripts that most aren't likely to have.
-#
-# Revision 1.73 2002/04/08 14:03:24 oes
-# oes for al: Fix install target
-#
-# Revision 1.72 2002/04/08 13:42:11 oes
-# Added safety check to *-dist targets; fixed permissions for feedback logfile
-#
-# Revision 1.71 2002/04/07 20:32:03 hal9
-# -Add meta data kludge for make dok-webserver via $(PERL).
-# -Add subdirs for 'make dok-release'.
-#
-# Revision 1.70 2002/04/07 08:59:40 swa
-# generated files. do NOT edit.
-# fixed directory bug in makefile.
-#
-# Revision 1.69 2002/04/07 08:10:47 swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments). Now committed webserver's
-# index file.
-#
-# Revision 1.68 2002/04/07 07:58:11 swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments)
-#
-# Revision 1.67 2002/04/07 05:31:42 hal9
-# Add 'dok-release' target:
-# -Set doc entities to VERSION and CODE_STATUS during make.
-# -Set doc conditional content flags (stable vs non-stable).
-# A separate target for the time being but needs to be incorporated into
-# dok build at some point.
-# -Filter out a spurious ^G from new man page > html converion in man2html.
-#
-# Revision 1.66 2002/04/06 20:28:21 jongfoster
-# Prettifying groff2html.
-# Using GNU Make's conditional makefile feature rather than shell "if"s.
-# (The shell "if"s were hiding errors)
-# "perl" -> "$(PERL)"
-# Spaces->tabs in a couple of places.
-#
-# Revision 1.65 2002/04/06 05:16:39 hal9
-# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
-# -Both of these will soon be generated files.
-#
-# Revision 1.64 2002/04/04 22:14:51 oes
-# No longer rely on find honoring -iname
-#
-# Revision 1.63 2002/04/04 21:06:22 swa
-# cosmetics.
-#
-# Revision 1.62 2002/04/04 20:49:50 swa
-# attempt to consolidate the
-# different dokbook versions.
-#
-# Revision 1.61 2002/04/04 19:18:21 swa
-# readme was leftover directory. use w3m instead
-# of lynx to be consistent among developers. use
-# consistent target naming.
-#
-# Revision 1.60 2002/04/04 12:25:41 oes
-# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
-#
-# Revision 1.59 2002/04/04 08:32:45 swa
-# wrong name for tarball-dist target. further fixed content of tarball dist
-#
-# Revision 1.58 2002/04/04 06:32:58 hal9
-# New dok targets for make readme.
-#
-# Revision 1.57 2002/04/04 00:36:36 gliptak
-# always use pcre for matching
-#
-# Revision 1.56 2002/04/03 22:28:03 gliptak
-# Removed references to gnu_regex
-#
-# Revision 1.55 2002/04/03 19:54:29 swa
-# freebsd tested to work. attempt to move tarball dist target forward
-#
-# Revision 1.54 2002/04/03 14:54:07 oes
-# Standard clean and clobber semantics II
-#
-# Revision 1.53 2002/04/03 14:19:16 oes
-# Standard clean and clobber semantics
-#
-# Revision 1.52 2002/04/03 02:56:18 hal9
-# Revert previous FAQ numbering kludge.
-#
-# Revision 1.51 2002/04/02 13:03:56 oes
-# Added fix for webserver permissions
-#
-# Revision 1.50 2002/04/02 03:46:24 hal9
-# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
-# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
-#
-# Revision 1.49 2002/03/30 22:20:12 swa
-# cd didn't work. neither did find.
-#
-# Revision 1.48 2002/03/30 19:04:06 swa
-# people release differently. no good.
-# I want to make parts of the docs only.
-#
-# Revision 1.47 2002/03/30 09:05:21 swa
-# better packaging. better rpm building.
-# tar failed on sun (no exclude there).
-#
-# Revision 1.46 2002/03/29 20:09:01 swa
-# al's patch
-#
-# Revision 1.45 2002/03/29 19:45:45 swa
-# for lazy swa
-#
-# Revision 1.44 2002/03/29 17:42:44 gliptak
-# Correcting for Solaris tar limitations
-#
-# Revision 1.43 2002/03/29 07:40:03 swa
-# fixed make webserver. doh
-#
-# Revision 1.42 2002/03/29 06:59:04 swa
-# other users could not modify files on webserver
-#
-# Revision 1.41 2002/03/28 20:43:00 swa
-# set make correctly
-#
-# Revision 1.40 2002/03/28 04:22:44 hal9
-# More on man2html stuff.
-#
-# Revision 1.39 2002/03/28 01:04:14 hal9
-# More man2html stuff for docs.
-#
-# Revision 1.38 2002/03/27 16:02:30 swa
-# have a generic target
-#
-# Revision 1.37 2002/03/27 15:30:26 swa
-# have a consistent appearance
-#
-# Revision 1.36 2002/03/27 14:58:08 swa
-# can be used by mutilple targets
-#
-# Revision 1.35 2002/03/27 14:53:19 swa
-# added solaris-dist
-#
-# Revision 1.34 2002/03/27 10:30:11 swa
-# we want a html man file on the webserver
-#
-# Revision 1.33 2002/03/27 03:05:35 hal9
-# Added man2html target for docs (redhat-dok only for now)
-#
-# Revision 1.32 2002/03/26 22:29:54 swa
-# we have a new homepage!
-#
-# Revision 1.31 2002/03/26 14:00:18 swa
-# fixed make tarball, tarball-dist, tarball-clean
-#
-# Revision 1.30 2002/03/25 12:52:25 swa
-# new targets
-#
-# Revision 1.29 2002/03/24 17:03:55 jongfoster
-# Name change
-#
-# Revision 1.28 2002/03/24 16:19:48 swa
-# configure needs to be generated.
-#
-# Revision 1.27 2002/03/24 16:13:57 swa
-# generated files are a nono in cvs
-#
-# Revision 1.26 2002/03/24 15:36:02 swa
-# did not build.
-#
-# Revision 1.25 2002/03/24 14:31:08 swa
-# remove more crappy files. set RPM
-# release version correctly.
-#
-# Revision 1.24 2002/03/24 14:19:55 swa
-# set rpm package release in configure.in. nowhere else.
-#
-# Revision 1.23 2002/03/24 13:06:49 swa
-# suse-clean now runs fine
-#
-# Revision 1.22 2002/03/24 12:56:21 swa
-# name change related issues.
-#
-# Revision 1.21 2002/03/24 12:43:57 swa
-# name change
-#
-# Revision 1.20 2002/03/24 11:39:17 jongfoster
-# Renaming config files
-#
-# Revision 1.19 2002/03/22 20:53:03 morcego
-# - Ongoing process to change name to JunkbusterNG
-# - configure/configure.in: no change needed
-# - GNUmakefile.in:
-# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-# - PROGRAM = jbng@EXEEXT@
-# - rh-spec now references as junkbusterng-rh.spec
-# - redhat-upload: references changed to junkbusterng-* (package names)
-# - tarball-dist: references changed to JunkbusterNG-distribution-*
-# - tarball-src: now JunkbusterNG-*
-# - install: initscript now junkbusterng.init and junkbusterng (when
-# installed)
-# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
-# - junkbusterng.spec:
-# - References to the expression ijb where changed where possible
-# - New package name: junkbusterng (all in lower case, acording to
-# the LSB recomendation)
-# - Version changed to: 2.9.13
-# - Release: 1
-# - Added: junkbuster to obsoletes and conflicts (Not sure this is
-# right. If it obsoletes, why conflict ? Have to check it later)
-# - Summary changed: Stefan, please check and aprove it
-# - Changes description to use the new name
-# - Sed string was NOT changed. Have to wait to the manpage to
-# change first
-# - Keeping the user junkbuster for now. It will require some aditional
-# changes on the script (scheduled for the next specfile release)
-# - Added post entry to move the old logfile to the new log directory
-# - Removing "chkconfig --add" entry (not good to have it automaticaly
-# added to the startup list).
-# - Added preun section to stop the service with the old name, as well
-# as remove it from the startup list
-# - Removed the chkconfig --del entry from the conditional block on
-# the preun scriptlet (now handled on the %files section)
-# - junkbuster.init: renamed to junkbusterng.init
-# - junkbusterng.init:
-# - Changed JB_BIN to jbng
-# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
-# be used where necessary (config dir)
-#
-# Aditional notes:
-# - The config directory is /etc/junkbuster yet. Have to change it on the
-# specfile, after it is changes on the code
-# - The only files that got renamed on the cvs tree were the rh specfile and
-# the init file. Some file references got changes on the makefile and on the
-# rh-spec (as listed above)
-#
-# Revision 1.18 2002/03/21 23:00:00 swa
-# want to autogenerate stuff.
-#
-# Revision 1.17 2002/03/19 19:30:04 morcego
-# - Fixing stylesheet checking on configure. If it is found, no further checks
-# should be done
-#
-# - configure will now check for db2html or docbook2html (should work now
-# on SuSe without the docbktls package)
-#
-# Revision 1.16 2002/03/14 22:32:32 hal9
-# Bumped the RPM version.
-#
-# Revision 1.15 2002/03/08 20:00:28 swa
-# some leftovers.
-#
-# Revision 1.14 2002/03/07 18:25:56 swa
-# synced redhat and suse build process
-#
-# Revision 1.13 2002/03/07 17:17:56 oes
-# (Hopefully) fixed for older make versions
-#
-# Revision 1.12 2002/03/07 15:28:27 swa
-# more informative
-#
-# Revision 1.11 2002/03/06 14:33:18 sarantis
-# Use proper temp file, not "abc".
-#
-# Revision 1.10 2002/03/06 14:19:35 sarantis
-# Cleanup PID_FILE_PATH from redhat-dist target
-#
-# Revision 1.9 2002/03/05 17:31:11 morcego
-# Search for docbook.dsl. Should solve portability problems for SuSe.
-#
-# Revision 1.8 2002/03/05 14:07:42 morcego
-# configure now detects rpm topdir, and change GNUmakefile acordingly
-# (based on sugestion by Sarantis Paskalis)
-#
-# Revision 1.7 2002/03/05 13:43:28 morcego
-# Checking for text browser, so redhat-dok can work.
-#
-# Revision 1.6 2002/03/05 13:10:51 morcego
-# Changes to implement redhat-dok (Hal Burgiss)
-# Changes to make it work on other distros and out-of-the-shelf configurations
-#
-# Revision 1.5 2002/02/27 15:30:39 hal9
-# Reset $(RPM_PACKAGEV) to 1 (was 2)
-#
-# Revision 1.4 2002/01/17 21:44:04 jongfoster
-# Adding urlmatch.[ch]
-#
-# Revision 1.3 2002/01/04 15:26:08 oes
-# Added tarball-src target
-#
-# Revision 1.2 2001/12/30 14:07:31 steudten
-# - Add signal handling (unix)
-# - Add SIGHUP handler (unix)
-# - Add creation of pidfile (unix)
-# - Add action 'top' in rc file (RH)
-# - Add entry 'SIGNALS' to manpage
-# - Add exit message to logfile (unix)
-#
-# Revision 1.1 2001/12/01 11:22:57 jongfoster
-# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-# make break in a more obvious way.
-# Adding .PHONY section.
-#
-# Revision 1.40 2001/12/01 00:24:11 jongfoster
-# Renaming various config files
-# Fixing CR->CRLF under Win32 (I hope)
-#
-# Revision 1.39 2001/11/06 12:07:30 steudten
-# Add --clean for building rpm in target redhat-dist.
-#
-# Revision 1.38 2001/11/05 21:35:23 steudten
-# Complete rewrite for the 'redhat-dist' target.
-# Checks for writeable RPM build directories for calling user.
-# So you must not be root, just set the modes to 1777 to
-# build a RH package.
-# Fix the upload-target to be arch independant.
-# Add target for 'solaris-dist' - coming soon.
-#
-# Revision 1.37 2001/11/01 00:52:04 hal9
-# Redhat-upload stuff per Stefan.
-#
-# Revision 1.36 2001/10/31 19:26:13 swa
-# automate process of uploading new releases
-# to sf.
-#
-# Revision 1.35 2001/10/15 22:14:59 joergs
-# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
-# the general CFLAGS already.
-#
-# Revision 1.34 2001/10/15 18:28:06 steudten
-# remove config.cache for target clobber.
-# Cleanup make dist for RH and S.u.S.E.
-#
-# Revision 1.33 2001/10/10 12:43:33 oes
-# Added ugly hack to make install target work at least for some setups.
-#
-# Revision 1.32 2001/10/09 22:38:19 jongfoster
-# Correcting actionsfile filename for Win32 INI build
-#
-# Revision 1.31 2001/09/23 10:13:48 swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30 2001/09/19 17:55:49 oes
-# Fixed CFLAGS
-#
-# Revision 1.29 2001/09/16 17:34:27 jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28 2001/09/13 15:19:08 swa
-# we want text files as well.
-#
-# Revision 1.27 2001/09/13 13:11:37 steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26 2001/09/12 23:44:54 david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25 2001/09/12 22:55:45 joergs
-# AmigaOS support added.
-#
-# Revision 1.24 2001/09/12 17:28:59 david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23 2001/09/12 16:28:42 swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22 2001/09/10 16:31:23 swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21 2001/09/10 11:12:49 oes
-# Turning on -Wall
-#
-# Revision 1.20 2001/08/02 22:04:29 jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19 2001/07/30 22:14:03 jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18 2001/07/29 17:09:17 jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-# which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17 2001/07/28 16:44:54 oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16 2001/07/15 19:45:33 jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15 2001/07/13 13:48:07 oes
-# - Moved STATIC #define for pcre to (ac)config.h
-# - Made -Ipcre depandant on static pcre compilation to
-# avoid version conflicts
-# - Included compilation and depandancies for new deanimate.c
-# - Made changes to the pcre/pcreposix/pcrs build process
-# as required by the new library autodetection in
-# configure.in
-#
-# Revision 1.14 2001/07/01 16:27:44 oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13 2001/06/29 13:18:36 oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12 2001/06/12 17:15:56 swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
-#
-# Revision 1.11 2001/06/11 11:26:35 sarantis
-# RPM version should be the same as ijbswa version. The rpm release is
-# specified in the specfile.
-#
-# Revision 1.10 2001/06/07 17:27:45 swa
-# added suse build section
-#
-# Revision 1.9 2001/06/04 18:31:58 swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.8 2001/06/04 10:44:57 swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-# Revision 1.7 2001/06/03 17:09:09 swa
-# swa for oes: reversed my earlier change
-#
-# Revision 1.6 2001/06/03 17:07:27 swa
-# swa for oes
-#
-# Revision 1.5 2001/06/03 13:57:26 swa
-# compile cgi.c (for andreas' GUI)
-#
-# Revision 1.4 2001/05/31 21:18:45 jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
-#
-# Revision 1.3 2001/05/29 20:02:48 joergs
-# Changes for AmigaOS added.
-#
-# Revision 1.2 2001/05/17 22:23:23 oes
-# - Added auto-generation of CRLFs for Win32 config files
-# - Added comment-prefix to all Win32-only options in the config file
-# and provided auto stripping of this prefix for the Win32 platform by make
-#
-# Revision 1.1.1.1 2001/05/15 13:59:00 oes
-# Initial import of version 2.9.3 source tree
-#
-#