# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.50 2002/04/02 03:46:24 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.112 2002/06/28 18:30:10 jongfoster Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
+RPM_PACKAGEV = ""
+SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
#############################################################################
-# Directories for "make install"
+# Source directories
#############################################################################
+DIR_PRIVOXY_ROOT := .
+DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
+DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
+DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
-DEST = @prefix@
-CONFDEST = @prefix@@sysconfdir@
-SBIN_DEST = @prefix@@sbindir@
-MAN_DEST = @prefix@@mandir@
+#############################################################################
+# Directories for "make install"
+#############################################################################
+DEST = @prefix@
+CONFDEST = @prefix@@sysconfdir@
+SBIN_DEST = @prefix@@sbindir@
+MAN_DEST = @prefix@@mandir@
+DOK_WEB_USEM = doc/webserver/user-manual
#############################################################################
# Build tools
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
-#INSTALL = cp -f
INSTALL = @INSTALL@
INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
TAR = tar
LN = ln
WDUMP = @WDUMP@ -dump
+JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
-DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
-DB2HTML = @DB2HTML@
-DKPREFIX = @DKPREFIX@
+DOC_STATUS = @DOC_STATUS@
+# Note: Please make sure that -d ldp.dsl\#html stays the last option to
+# $(JADEBIN), because for some targets "-notoc" will be appended
+# to it (--> "ldp.dsl\#html-notoc").
+DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html
MAN2HTML = @MAN2HTML@
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
+PERL = perl
+DOC_DIR = doc/source
+DOC_TMP = $(DOC_DIR)/tmp
+DKPREFIX = @DKPREFIX@
#User Group paras
USER = @USER@
# Program to do LF->CRLF
#
-# The sed version should be the most portable, but it doesn't for for me,
+# The sed version should be the most portable, but it doesn't work for me,
# the other two do. FIXME.
# - Jon
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
-DOSFILTER = perl -p -e 's/\n/\r\n/'
+DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
#############################################################################
# Setup for make distribution rh and suse for now
# and escape every '#' in the find. doh.
CONFIG_FILES = config trust \
default.action \
- basic.action intermediate.action advanced.action \
+ standard.action user.action \
default.filter \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
DOC_FILES = AUTHORS LICENSE README ChangeLog \
- `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` privoxy.1
+ `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
+ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
+ `find doc/webserver/ -name "*.css"` \
+ privoxy.1
#############################################################################
# Filenames and libraries
#############################################################################
-C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
- list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
- urlmatch.c
-
-C_OBJS = $(C_SRC:.c=.@OBJEXT@)
+C_SRC = \
+ $(DIR_PRIVOXY_SRC)/actions.c \
+ $(DIR_PRIVOXY_SRC)/cgi.c \
+ $(DIR_PRIVOXY_SRC)/cgiedit.c \
+ $(DIR_PRIVOXY_SRC)/cgisimple.c \
+ $(DIR_PRIVOXY_SRC)/deanimate.c \
+ $(DIR_PRIVOXY_SRC)/encode.c \
+ $(DIR_PRIVOXY_SRC)/errlog.c \
+ $(DIR_PRIVOXY_SRC)/filters.c \
+ $(DIR_PRIVOXY_SRC)/gateway.c \
+ $(DIR_PRIVOXY_SRC)/jbsockets.c \
+ $(DIR_PRIVOXY_SRC)/jcc.c \
+ $(DIR_PRIVOXY_SRC)/killpopup.c \
+ $(DIR_PRIVOXY_SRC)/list.c \
+ $(DIR_PRIVOXY_SRC)/loadcfg.c \
+ $(DIR_PRIVOXY_SRC)/loaders.c \
+ $(DIR_PRIVOXY_SRC)/miscutil.c \
+ $(DIR_PRIVOXY_SRC)/parsers.c \
+ $(DIR_PRIVOXY_SRC)/ssplit.c \
+ $(DIR_PRIVOXY_SRC)/urlmatch.c
+
+C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
-W32_FILES = @WIN_ONLY@w32.res
-W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
+W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
+W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES)
+W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
W32_INIS = @WIN_ONLY@config.txt trust.txt
-PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
-PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
+PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c
+PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
-PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
-PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
-PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
+PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c
+PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
+PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
-# No REGEX (Either because dynamically linked pcreposix, or no regex at all):
+# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
-# GNU REGEX:
-@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
-# PCRE REGEX:
-@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
+@STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
-REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
+REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
REGEX_HDRS = $(REGEX_SRC:.c=.h)
# Dependencies introduced by #include "project.h".
-PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
+PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h
# Socket libraries for platforms that need them explicitly defined
SOCKET_LIB = @SOCKET_LIB@
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
+.PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install
+install conectiva-spec conectiva-dist conectiva-upload debian-dist \
+debian-upload ensure-wdump ensure-jadebin ensure-dkprefix
#############################################################################
-# Define this explicitly because Solaris is broken!
+# Compile command
#############################################################################
-%.o: %.c
+$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ)
+ $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ)
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+$(DIR_PRIVOXY_OBJ):
+ mkdir obj
#############################################################################
# Win32 config files
re_filterfile.txt: re_filterfile
$(DOSFILTER) < $< > $@
+
+#############################################################################
+# Pre-dist check:
+#############################################################################
+dist-check:
+ @if [ -d CVS ]; then \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** WARNING ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
+ $(ECHO) "*** that you are trying to build a distribution ***"; \
+ $(ECHO) "*** package based on a checked out, not an ***"; \
+ $(ECHO) "*** exported copy of the source tree. Please ***"; \
+ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
+ $(ECHO) "*** developer manual. ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
+ $(ECHO) -n "really want to proceed: "; \
+ read answer; \
+ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
+ fi;
+
+
#############################################################################
# RPM specifice stuff (SuSE or Redhat, ..)
#############################################################################
-rpm-stuff:
+rpm-stuff: dist-check clean clobber
for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
if [ ! -w $(RPM_BASE)/$$dir ]; then \
$(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
fi; \
done; \
- $(MAKE) clobber
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+check-release:
+ @if [ "$(RPM_PACKAGEV)" = "" ]; then \
+ echo ; \
+ echo " ERROR: NO RPM_PACKAGEV VALUE"; \
+ echo " No value given for RPM_PACKAGEV. Please use:"; \
+ echo " make dist-upload RPM_PACKAGEV=release"; \
+ echo " where \"release\" is the release number you want to and"; \
+ echo " where \"dist\" is the name of the distro (redhat or suse)"; \
+ echo ; \
+ echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
+ echo ""; \
+ echo "ATTENTION: If your distribution use a specific tag on the"; \
+ echo " release field (like \"cl\" for Conectiva, and"; \
+ echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
+ echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
+ echo " Do it like you would do for a redhat package,"; \
+ echo " (i.e. just the number)."; \
+ echo ; \
+ exit 1; \
+ fi
+
+
+#############################################################################
+# Create Conectiva specfile from RedHat specfile
+#############################################################################
+conectiva-spec:
+ $(RM) privoxy-cl.spec
+ chmod a+x genclspec.sh
+ ./genclspec.sh
+
+#############################################################################
+# Conectiva distribution for x86
+#############################################################################
+conectiva-dist: rpm-stuff conectiva-spec
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPM) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+conectiva-upload: check-release
+ make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
#############################################################################
# redhat distribution alpha and x86
#############################################################################
redhat-dist: rpm-stuff
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- privoxy-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
- $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
+# For testing build issues only! Use redhat-dist for official releases.
+redhat-test:
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -tb $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+ @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
# anonymously ncftps the rpms to sourceforge
-redhat-upload:
+redhat-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
# suse distribution. works fine. no need to be root.
#############################################################################
suse-dist: rpm-stuff
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- privoxy-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
-
- $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
+# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+# privoxy-suse.spec > $$TMPFILE ; then \
+# $(MV) -f $$TMPFILE privoxy-suse.spec; \
+# else \
+# $(ECHO) "Could not set version info in specfile."; \
+# exit 1;\
+# fi
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
$(RPM) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# anonymously ncftps the rpms to sourceforge
-suse-upload:
+suse-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
# handle with care. use with root.
suse-clean:
- rpm -e junkbuster-suse || true
- rm -rf /etc/junkbuster
- rm -rf /etc/rc.d/junkbuster*
- rm -rf /var/run/junkbuster.pid
- rm -rf /var/log/junkbuster
- rm -f /etc/init.d/junkbuster
- rm -f /usr/sbin/junkbuster
- rm -f /usr/sbin/rcjunkbuster
- rm -f /usr/share/man/man1/junkbuster.1.gz
- rpm -e privoxy-suse || true
- rm -rf /etc/privoxy
- rm -rf /etc/rc.d/privoxy*
- rm -rf /var/run/privoxy.pid
- rm -rf /var/log/privoxy
- rm -f /etc/init.d/privoxy
- rm -f /usr/sbin/privoxy
- rm -f /usr/sbin/rcprivoxy
- rm -f /usr/share/man/man1/privoxy.1.gz
+ $(RPM) -e junkbuster-suse || true
+ $(RM) -r /etc/junkbuster
+ $(RM) -r /etc/rc.d/junkbuster*
+ $(RM) -r /var/run/junkbuster.pid
+ $(RM) -r /var/log/junkbuster
+ $(RM) /etc/init.d/junkbuster
+ $(RM) /usr/sbin/junkbuster
+ $(RM) /usr/sbin/rcjunkbuster
+ $(RM) /usr/share/man/man1/junkbuster.1.gz
+ $(RPM) -e privoxy-suse || true
+ $(RM) -r /etc/privoxy
+ $(RM) -r /etc/rc.d/privoxy*
+ $(RM) -r /var/run/privoxy.pid
+ $(RM) -r /var/log/privoxy
+ $(RM) /etc/init.d/privoxy
+ $(RM) /usr/sbin/privoxy
+ $(RM) /usr/sbin/rcprivoxy
+ $(RM) /usr/share/man/man1/privoxy.1.gz
#############################################################################
# generic distribution
#############################################################################
-gen-dist:
+gen-dist: dist-check
@$(ECHO) ""
@$(ECHO) "You have run autoconf && autoheader && ./configure right?"
@$(ECHO) ""
$(STRIP_PROG) $(PROGRAM)
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
# add program
- (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+ (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
# add config files
for foo in $(CONFIG_FILES); do \
- (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# add documentation
for foo in $(DOC_FILES); do \
- (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
#############################################################################
-# solaris distribution
+# solaris distribution. verified on SF machines by swa.
#############################################################################
solaris-dist: gen-dist
@$(ECHO) Done.
# debian distribution
#############################################################################
debian-dist:
- @$(ECHO) coming soon.
+ @$(ECHO) Creating Debian package. Will exist in parent directory.
+ dpkg-buildpackage -rfakeroot -us -uc
debian-upload:
- @$(ECHO) coming soon.
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
#############################################################################
# macosx distribution
@$(ECHO) coming soon.
#############################################################################
-# freebsd distribution
+# freebsd distribution. verified on SF machines by swa.
#############################################################################
-freebsd-dist:
- @$(ECHO) coming soon.
-freebsd-upload:
- @$(ECHO) coming soon.
+freebsd-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the package to sourceforge
+freebsd-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+freebsd-clean: gen-clean
+ @$(ECHO) Done.
#############################################################################
# Windows distribution
#############################################################################
win-dist:
- $(ECHO) Not implemented.
+ @$(ECHO) RTFM. You shouldn't run configure before making
+ @$(ECHO) the Windows release, so you need to start again from
+ @$(ECHO) a clean CVS export.
+ @false
#############################################################################
-# Tarball distribution
+# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
+# (FIXME:) only parts of the static / generated docs mix in doc/webserver
#############################################################################
-tarball-dist: clobber
+
+tarball-dist: dist-check clean clobber
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
- cd .. && find privoxy-$(VERSION)-$(CODE_STATUS)
-# cd .. && $(TAR) --exclude "CVS" --exclude "#*" --exclude ".#*" --exclude ".cvsignore" -cvhzf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz privoxy-$(VERSION)-$(CODE_STATUS)
-# $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
- @$(ECHO) Tarball without any binary created.
+
+ for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
+ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
+ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
+ done && \
+ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
+
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Tarball distribution created.
# anonymously ncftps the tarball to sourceforge
tarball-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
-# handle with care
tarball-clean:
- $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
#############################################################################
#
#
#############################################################################
-# our style file
-doc/source/ldpOK.dsl:
- if [ "$(DKPREFIX)" != "none" ]; then \
- sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
- else \
- cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
- fi
-
-# Otherwise we get plain groff conversion.
-groff2html:
- $(G2H_CMD) ./privoxy.1 > doc/webserver/man-page/privoxy-man-page.html
-
-## developer manual
-dok-devel: doc/source/ldpOK.dsl
- mkdir -p doc/text
- rm -rf doc/webserver/developer-manual
- cd doc/source && $(DB2HTML) -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
-
-## user manual
-dok-user: doc/source/ldpOK.dsl
- mkdir -p doc/text
- rm -rf doc/webserver/user-manual
- cd doc/source && $(DB2HTML) -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
-
-## faq
-dok-faq: doc/source/ldpOK.dsl
- mkdir -p doc/text
- rm -rf doc/webserver/faq
-# Turn off section numbering for FAQ
- sed 's/(define %section-autolabel% #t)/(define %section-autolabel% #f)/' doc/source/ldpOK.dsl > tmp.dsl && mv -f tmp.dsl doc/source/ldpOK.dsl
- cd doc/source && $(DB2HTML) -s ldpOK.dsl faq.sgml && mv faq ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-
-## man page
-dok-man: doc/source/ldpOK.dsl
- mkdir -p doc/man
- mkdir -p doc/webserver/man-page
- if [ "$(MAN2HTML)" != "false" ]; then \
- $(ECHO) "<html><head><title>Privoxy|Doc/Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
- man ./privoxy.1 | $(MAN2HTML) -bare \
- >> doc/webserver/man-page/privoxy-man-page.html; \
- $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
- else \
- $(MAKE) groff2html; \
- fi
-dok: dok-devel dok-user dok-faq dok-man
-## kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
- @$(ECHO) Documentation created.
-
-#
-# an alternative to the above dok
-#
-redhat-dok: doc/source/ldpOK.dsl man2html
- mkdir -p doc/text doc/man doc/source/user-manual \
- doc/source/developer-manual doc/source/faq
-## user manual
- rm -rf doc/webserver/user-manual
- cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
- mv user-manual ../webserver
- cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
- user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
- cd .. && mv developer-manual ../webserver
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
- developer-manual
-## faq
- rm -rf doc/webserver/faq
-# Turn off section numbering for FAQ
- sed 's/(define %section-autolabel% #t)/(define %section-autolabel% #f)/' doc/source/ldpOK.dsl > tmp.dsl && mv -f tmp.dsl doc/source/ldpOK.dsl
- cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-# kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
-
-# For those with man2html ala RH7's.
-man2html:
- mkdir -p doc/webserver/man-page
- if [ "$(MAN2HTML)" != "false" ]; then \
- $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \
- perl -pi -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' doc/webserver/man-page/privoxy-man-page.html; \
- else \
- $(MAKE) groff2html; \
- fi
+dok:
+ cd $(DOC_DIR) && $(MAKE)
#############################################################################
#
# moves dokumentation to webserver
#
#############################################################################
-webserver:
+webserver: tidy
@$(ECHO) -------------------------------------------------------
@$(ECHO) You have run make dok/redhat-dok before, right?
@$(ECHO) Note that this command scps all stuff to the webserver,
@$(ECHO) it will not remove obsolete documents.
@$(ECHO) -------------------------------------------------------
- cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- @$(ECHO) Fixing permissions
- @ssh ijbswa.sourceforge.net chmod -R g+rw /home/groups/i/ij/ijbswa/htdocs/ 2> /dev/null
-webquick:
- cd doc/webserver/actions && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/actions
+ @$(ECHO) Uploading
+ @cd doc/webserver; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+
@$(ECHO) Fixing permissions
- @ssh ijbswa.sourceforge.net chmod -R g+rw /home/groups/i/ij/ijbswa/htdocs/actions 2> /dev/null
+ @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+ @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
+web-actions: tidy
+ @$(ECHO) Uploading
+ @cd doc/webserver/actions; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+
+ @$(ECHO) Fixing permissions
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
+ @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
-encode.@OBJEXT@: encode.c encode.h config.h
-errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
-gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
-jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
-list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
-loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
-miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
-ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
-urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
-
-# GNU regex
-gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
+$(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h
+$(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
+$(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
+$(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
+$(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS)
+$(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h
+$(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h
+$(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h
+$(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
+$(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h
+$(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h
+$(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
+$(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h
+$(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h
+$(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h
+$(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h
+$(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
+$(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h
+$(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+$(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h
# PCRE
-pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
-pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
-pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
+$(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
+$(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
+$(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c
+$(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
+$(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
# An auxiliary program makes the PCRE default character table source
-pcre/chartables.c: pcre/dftables@EXEEXT@
- pcre/dftables@EXEEXT@ >pcre/chartables.c
+$(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@
+ $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c
-pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
- $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
+$(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h
+ $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
# Win32
-w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
-w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
-
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
+$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
+$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
+$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h win32.h
+
+$(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
+ $(DIR_PRIVOXY_SRC)/w32res.h \
+ $(DIR_PRIVOXY_SRC)/config.h \
+ $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \
+ $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \
+ $(DIR_PRIVOXY_SRC)/icons/idle.ico \
+ $(DIR_PRIVOXY_SRC)/icons/privoxy.ico
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
-@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
-@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
+$(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h
$(PROGRAM): $(OBJS) $(W32_FILES)
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) junkbuster config.log
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) \
+ `find . -name TAGS -o -name tags`
-clobber: clean
- $(RM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` `find . -name TAGS` config.status config.h.in config.log junkbuster.log privoxy.log config.cache *~ *.tar.gz configure
+tidy:
+ $(RM) `find . -name "*~"`
+# $(RM) `find . -name "#*#"` # what is this for??
+ $(RM) `find . -name ".\#*"`
+
+clobber: tidy
+ $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
+ privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \
+ $(DOC_DIR)/GNUmakefile
+
+#
+# FIXME: What is all this?
+#
+ $(RM) cscope.* *.pdb *.lib *.exp
+
+distclean: clobber
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
$(STRIP_PROG) $(PROGRAM)
$(INSTALL) $(INSTALL_D) $(SBIN_DEST)
$(INSTALL) $(INSTALL_D) $(DEST)/user-manual
- $(INSTALL) $(INSTALL_D) $(DEST)/templates
- $(INSTALL) $(INSTALL_D) $(CONFDEST)
+ $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
+ $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
$(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
- if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi
- $(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates
+ if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
+ $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
$(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
# FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
# FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
$(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
+coffee:
+ @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
+ 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
+ 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
+ 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
+ 193,51,228,11,1,0,0);'|zcat
#############################################################################
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.112 2002/06/28 18:30:10 jongfoster
+# Fixing bugs compiling PCRE
+#
+# Revision 1.111 2002/06/05 00:26:21 hal9
+# Move all doc build stuff to doc/source/GNUmakefile, leaving a 'make dok'
+# target only in toplevel. Add DOC_STATUS variable so docs can be built without
+# touching sgml source.
+#
+# Revision 1.110 2002/06/04 14:51:48 jongfoster
+# Updating for new paths:
+# - Source files in src/
+# - Object files in obj/
+#
+# Revision 1.109 2002/05/28 09:16:15 oes
+# Added comment for -notoc kludge
+#
+# Revision 1.108 2002/05/28 03:56:08 hal9
+# make dok-index target for privoxy-index.html. Fix *bak dead soldiers in
+# doc/webserver.
+#
+# Revision 1.107 2002/05/27 23:26:33 mal0rd
+# Made doc-generation configuration automatic.
+# References to DB2HTML were removed, not used.
+# --with-docbook now only needed if in odd path.
+#
+# Revision 1.106 2002/05/26 04:55:11 mal0rd
+# Added debian-dist and debian-upload targets. Also documented usage.
+#
+# Revision 1.105 2002/05/25 22:48:19 hal9
+# Add -notoc to README build (per oes's dsl magic).
+#
+# Revision 1.104 2002/05/24 00:03:49 oes
+# Use p_doc.css for the Homepage for consistency
+#
+# Revision 1.103 2002/05/23 23:19:00 oes
+# Use dsl without TOC for the homepage
+#
+# Revision 1.102 2002/05/16 01:20:17 hal9
+# make announce target added.
+#
+# Revision 1.101 2002/05/15 12:28:46 oes
+# Trying to keep Hal happy :)
+#
+# Revision 1.100 2002/05/08 13:48:18 hal9
+# Ooops, that trashed JB v2.0.2 comment. Fixed.
+#
+# Revision 1.99 2002/05/08 13:42:07 hal9
+# This fixes the numbering problem on index.html in contact info section (.1.). Using
+# perl, since its way too convoluted to try to fix proper with docbook.
+#
+# Revision 1.98 2002/05/03 14:33:06 oes
+# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
+#
+# Revision 1.97 2002/04/27 20:27:43 swa
+# no longer needed due to new
+# PACKAGE_VERSION process
+#
+# Revision 1.96 2002/04/27 17:44:32 morcego
+# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
+# - Using the RM macro everywhere rm is called (either we use, or don't)
+# - Same for RPM
+#
+# Revision 1.95 2002/04/27 15:37:25 swa
+# replacing directory in document creation process
+# no longer necessary.
+#
+# Revision 1.94 2002/04/27 08:23:29 swa
+# pdf process reviewed and cleaned up
+#
+# Revision 1.93 2002/04/27 04:55:53 morcego
+# privoxy-cl.spec now gets removed by clobber target
+#
+# Revision 1.92 2002/04/27 04:53:40 morcego
+# Adding --exclude "PACKAGERS" to every tar command that applies (not for
+# webserver target)
+#
+# Revision 1.91 2002/04/27 04:44:51 morcego
+# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
+# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
+# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
+# conectiva-upload
+# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
+# for Conectiva Linux
+#
+# Revision 1.90 2002/04/26 17:46:53 swa
+# be consistent
+#
+# Revision 1.89 2002/04/26 17:20:54 swa
+# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
+#
+# Revision 1.88 2002/04/25 19:13:57 morcego
+# Removed RPM release number declaration on configure.in
+# Changed makefile to use given value for RPM_PACKAGEV when on uploading
+# targets (will produce an error, explaining who to do it, if no value
+# if provided).
+#
+# Revision 1.87 2002/04/23 14:10:59 swa
+# now create pdf documents
+#
+# Revision 1.86 2002/04/15 04:30:27 hal9
+# Missed two -pi.bak's on perl/cygwin problem.
+#
+# Revision 1.85 2002/04/14 01:05:34 hal9
+# Revert dok-webserver change for SF logo.
+#
+# Revision 1.84 2002/04/13 22:43:25 hal9
+# -Fix dok-webserver for SF logo (more perl).
+# -Change all perl -pi to perl -pi.bak for Cygwin problem.
+#
+# Revision 1.83 2002/04/12 09:39:25 oes
+# Excluding yet more files from tarball; making dist warning yet more scary
+#
+# Revision 1.82 2002/04/11 21:07:11 oes
+# Excluding more files from tarball build
+#
+# Revision 1.81 2002/04/11 14:40:27 oes
+# Fixed typo -- Thanks, Moritz!
+#
+# Revision 1.80 2002/04/11 12:50:00 oes
+# Fixed tarball-dist target
+#
+# Revision 1.79 2002/04/11 06:49:28 oes
+# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
+#
+# Revision 1.78 2002/04/09 13:37:11 sarantis
+# fix tar options typo
+#
+# Revision 1.77 2002/04/09 13:28:53 swa
+# build suse and gen-dist with html docs
+#
+# Revision 1.76 2002/04/08 22:43:41 oes
+# Fix: Include dotfiles in fixing webserver permissions
+#
+# Revision 1.75 2002/04/08 22:14:59 oes
+# Silencing tar warnings in the web* targets
+#
+# Revision 1.74 2002/04/08 15:22:44 hal9
+# This has finishing touches for dok building. Should be ready to go.
+# -The main doc build is now 'make dok', should work on Redhat too.
+# -Removed man page from main doc build. It is built separately due to
+# perl scripts that most aren't likely to have.
+#
+# Revision 1.73 2002/04/08 14:03:24 oes
+# oes for al: Fix install target
+#
+# Revision 1.72 2002/04/08 13:42:11 oes
+# Added safety check to *-dist targets; fixed permissions for feedback logfile
+#
+# Revision 1.71 2002/04/07 20:32:03 hal9
+# -Add meta data kludge for make dok-webserver via $(PERL).
+# -Add subdirs for 'make dok-release'.
+#
+# Revision 1.70 2002/04/07 08:59:40 swa
+# generated files. do NOT edit.
+# fixed directory bug in makefile.
+#
+# Revision 1.69 2002/04/07 08:10:47 swa
+# create some of the webserver docs
+# automatically (in particular if
+# those docs recycle other documentation
+# fragments). Now committed webserver's
+# index file.
+#
+# Revision 1.68 2002/04/07 07:58:11 swa
+# create some of the webserver docs
+# automatically (in particular if
+# those docs recycle other documentation
+# fragments)
+#
+# Revision 1.67 2002/04/07 05:31:42 hal9
+# Add 'dok-release' target:
+# -Set doc entities to VERSION and CODE_STATUS during make.
+# -Set doc conditional content flags (stable vs non-stable).
+# A separate target for the time being but needs to be incorporated into
+# dok build at some point.
+# -Filter out a spurious ^G from new man page > html converion in man2html.
+#
+# Revision 1.66 2002/04/06 20:28:21 jongfoster
+# Prettifying groff2html.
+# Using GNU Make's conditional makefile feature rather than shell "if"s.
+# (The shell "if"s were hiding errors)
+# "perl" -> "$(PERL)"
+# Spaces->tabs in a couple of places.
+#
+# Revision 1.65 2002/04/06 05:16:39 hal9
+# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
+# -Both of these will soon be generated files.
+#
+# Revision 1.64 2002/04/04 22:14:51 oes
+# No longer rely on find honoring -iname
+#
+# Revision 1.63 2002/04/04 21:06:22 swa
+# cosmetics.
+#
+# Revision 1.62 2002/04/04 20:49:50 swa
+# attempt to consolidate the
+# different dokbook versions.
+#
+# Revision 1.61 2002/04/04 19:18:21 swa
+# readme was leftover directory. use w3m instead
+# of lynx to be consistent among developers. use
+# consistent target naming.
+#
+# Revision 1.60 2002/04/04 12:25:41 oes
+# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
+#
+# Revision 1.59 2002/04/04 08:32:45 swa
+# wrong name for tarball-dist target. further fixed content of tarball dist
+#
+# Revision 1.58 2002/04/04 06:32:58 hal9
+# New dok targets for make readme.
+#
+# Revision 1.57 2002/04/04 00:36:36 gliptak
+# always use pcre for matching
+#
+# Revision 1.56 2002/04/03 22:28:03 gliptak
+# Removed references to gnu_regex
+#
+# Revision 1.55 2002/04/03 19:54:29 swa
+# freebsd tested to work. attempt to move tarball dist target forward
+#
+# Revision 1.54 2002/04/03 14:54:07 oes
+# Standard clean and clobber semantics II
+#
+# Revision 1.53 2002/04/03 14:19:16 oes
+# Standard clean and clobber semantics
+#
+# Revision 1.52 2002/04/03 02:56:18 hal9
+# Revert previous FAQ numbering kludge.
+#
+# Revision 1.51 2002/04/02 13:03:56 oes
+# Added fix for webserver permissions
+#
# Revision 1.50 2002/04/02 03:46:24 hal9
# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)