# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.11 2002/03/06 14:33:18 sarantis Exp $
+# $Id: GNUmakefile.in,v 1.204 2011/09/06 18:45:28 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 the SourceForge
-# IJBSWA team. http://ijbswa.sourceforge.net
+# Written by and Copyright (C) 2001-2011 members of the
+# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and
+# by and Copyright (C) 1997 Anonymous Coders and
# Junkbusters Corporation. http://www.junkbusters.com
#
-# This program is free software; you can redistribute it
+# This program is free software; you can redistribute it
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
-# $Log: GNUmakefile.in,v $
-# Revision 1.11 2002/03/06 14:33:18 sarantis
-# Use proper temp file, not "abc".
-#
-# Revision 1.10 2002/03/06 14:19:35 sarantis
-# Cleanup PID_FILE_PATH from redhat-dist target
-#
-# Revision 1.9 2002/03/05 17:31:11 morcego
-# Search for docbook.dsl. Should solve portability problems for SuSe.
-#
-# Revision 1.8 2002/03/05 14:07:42 morcego
-# configure now detects rpm topdir, and change GNUmakefile acordingly
-# (based on sugestion by Sarantis Paskalis)
-#
-# Revision 1.7 2002/03/05 13:43:28 morcego
-# Checking for text browser, so redhat-dok can work.
-#
-# Revision 1.6 2002/03/05 13:10:51 morcego
-# Changes to implement redhat-dok (Hal Burgiss)
-# Changes to make it work on other distros and out-of-the-shelf configurations
-#
-# Revision 1.5 2002/02/27 15:30:39 hal9
-# Reset $(RPM_PACKAGEV) to 1 (was 2)
-#
-# Revision 1.4 2002/01/17 21:44:04 jongfoster
-# Adding urlmatch.[ch]
-#
-# Revision 1.3 2002/01/04 15:26:08 oes
-# Added tarball-src target
-#
-# Revision 1.2 2001/12/30 14:07:31 steudten
-# - Add signal handling (unix)
-# - Add SIGHUP handler (unix)
-# - Add creation of pidfile (unix)
-# - Add action 'top' in rc file (RH)
-# - Add entry 'SIGNALS' to manpage
-# - Add exit message to logfile (unix)
-#
-# Revision 1.1 2001/12/01 11:22:57 jongfoster
-# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-# make break in a more obvious way.
-# Adding .PHONY section.
-#
-# Revision 1.40 2001/12/01 00:24:11 jongfoster
-# Renaming various config files
-# Fixing CR->CRLF under Win32 (I hope)
-#
-# Revision 1.39 2001/11/06 12:07:30 steudten
-# Add --clean for building rpm in target redhat-dist.
-#
-# Revision 1.38 2001/11/05 21:35:23 steudten
-# Complete rewrite for the 'redhat-dist' target.
-# Checks for writeable RPM build directories for calling user.
-# So you must not be root, just set the modes to 1777 to
-# build a RH package.
-# Fix the upload-target to be arch independant.
-# Add target for 'solaris-dist' - coming soon.
-#
-# Revision 1.37 2001/11/01 00:52:04 hal9
-# Redhat-upload stuff per Stefan.
-#
-# Revision 1.36 2001/10/31 19:26:13 swa
-# automate process of uploading new releases
-# to sf.
-#
-# Revision 1.35 2001/10/15 22:14:59 joergs
-# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
-# the general CFLAGS already.
-#
-# Revision 1.34 2001/10/15 18:28:06 steudten
-# remove config.cache for target clobber.
-# Cleanup make dist for RH and S.u.S.E.
-#
-# Revision 1.33 2001/10/10 12:43:33 oes
-# Added ugly hack to make install target work at least for some setups.
-#
-# Revision 1.32 2001/10/09 22:38:19 jongfoster
-# Correcting actionsfile filename for Win32 INI build
-#
-# Revision 1.31 2001/09/23 10:13:48 swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30 2001/09/19 17:55:49 oes
-# Fixed CFLAGS
-#
-# Revision 1.29 2001/09/16 17:34:27 jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28 2001/09/13 15:19:08 swa
-# we want text files as well.
-#
-# Revision 1.27 2001/09/13 13:11:37 steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26 2001/09/12 23:44:54 david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25 2001/09/12 22:55:45 joergs
-# AmigaOS support added.
-#
-# Revision 1.24 2001/09/12 17:28:59 david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23 2001/09/12 16:28:42 swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22 2001/09/10 16:31:23 swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21 2001/09/10 11:12:49 oes
-# Turning on -Wall
-#
-# Revision 1.20 2001/08/02 22:04:29 jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19 2001/07/30 22:14:03 jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18 2001/07/29 17:09:17 jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-# which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17 2001/07/28 16:44:54 oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16 2001/07/15 19:45:33 jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15 2001/07/13 13:48:07 oes
-# - Moved STATIC #define for pcre to (ac)config.h
-# - Made -Ipcre depandant on static pcre compilation to
-# avoid version conflicts
-# - Included compilation and depandancies for new deanimate.c
-# - Made changes to the pcre/pcreposix/pcrs build process
-# as required by the new library autodetection in
-# configure.in
-#
-# Revision 1.14 2001/07/01 16:27:44 oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13 2001/06/29 13:18:36 oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12 2001/06/12 17:15:56 swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
-#
-# Revision 1.11 2001/06/11 11:26:35 sarantis
-# RPM version should be the same as ijbswa version. The rpm release is
-# specified in the specfile.
-#
-# Revision 1.10 2001/06/07 17:27:45 swa
-# added suse build section
-#
-# Revision 1.9 2001/06/04 18:31:58 swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.8 2001/06/04 10:44:57 swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-# Revision 1.7 2001/06/03 17:09:09 swa
-# swa for oes: reversed my earlier change
-#
-# Revision 1.6 2001/06/03 17:07:27 swa
-# swa for oes
-#
-# Revision 1.5 2001/06/03 13:57:26 swa
-# compile cgi.c (for andreas' GUI)
-#
-# Revision 1.4 2001/05/31 21:18:45 jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
-#
-# Revision 1.3 2001/05/29 20:02:48 joergs
-# Changes for AmigaOS added.
-#
-# Revision 1.2 2001/05/17 22:23:23 oes
-# - Added auto-generation of CRLFs for Win32 config files
-# - Added comment-prefix to all Win32-only options in the config file
-# and provided auto stripping of this prefix for the Win32 platform by make
-#
-# Revision 1.1.1.1 2001/05/15 13:59:00 oes
-# Initial import of version 2.9.3 source tree
-#
-#
+
+#############################################################################
+# Set make command correctly
+#############################################################################
+@SET_MAKE@
#############################################################################
# Version number (for RPM)
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
-RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = 1
+SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
#############################################################################
-# Directories for "make install"
+# "make install" directories and variables
#############################################################################
-DEST = @sysconfdir@/junkbuster
-SBIN_DEST = @sbindir@
-MAN_DEST = @mandir@
-
+#User Group paras
+USER = @USER@
+GROUP = @GROUP@
+
+datarootdir = @datarootdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+CONF_BASE = @sysconfdir@
+SBIN_DEST = @sbindir@
+MAN_DIR = @mandir@
+MAN_DEST = $(MAN_DIR)/man1
+MAN_PAGE = privoxy.1
+SHARE_DEST = @datadir@
+DOC_DEST = $(SHARE_DEST)/doc/privoxy
+VAR_DEST = @localstatedir@
+LOGS_DEST = $(VAR_DEST)/log/privoxy
+PIDS_DEST = $(VAR_DEST)/run
+
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# by the target rule CONF_DEST
+#
+# also if the $prefix is /usr/local and there is no
+# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
+# instead in this situation
+#
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# changes this to /var for storing the logs and pidfile
+
+# used in source dir only, the install goes to $share_dest/doc/privoxy
+DOK_WEB = doc/webserver/
+
+# Install usage should be compatible with install-sh.
+INSTALL = @INSTALL@
+# Binaries
+BIN_MODE = 0755
+# Support files, docs, etc.
+RA_MODE = 0664
+# Directory
+DIR_MODE = 0755
+# Files daemon writes to.
+RWD_MODE = 0660
+INSTALL_P = -m $(BIN_MODE)
+INSTALL_T = -m $(RA_MODE)
+INSTALL_D = -m $(DIR_MODE) -d
+INSTALL_R = -m $(RWD_MODE)
+
+# install options for superuser install
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
#############################################################################
-PROGRAM = junkbuster@EXEEXT@
+PROGRAM = privoxy@EXEEXT@
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
-INSTALL = cp -f
+
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
+ID = id
LD = @CC@
RM = rm -f
+CP = cp -f
+RMDIR = rmdir
+MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
+GREP = grep
CAT = cat
-RPM = rpm
-MV = mv
+MV = mv
TAR = tar
-MAKE = make
LN = ln
+TOUCH = touch
+KILL = kill
+CHMOD = chmod
+CHOWN = chown
+CHGRP = chgrp
+GROUPS = groups
WDUMP = @WDUMP@ -dump
+JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
-DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
-DKPREFIX = @DKPREFIX@
+DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
+DB2HTML = @DB2HTML@
+MAN2HTML = @MAN2HTML@
+G2H_CMD = groff -mandoc -Thtml
+TARGET_OS = @host@
+PERL = perl
+DOC_DIR = doc/source
+DOC_TMP = $(DOC_DIR)/tmp
+DOC_STATUS = @DOC_STATUS@
+TIDY = tidy -modify -indent -clean -wrap 78
# Program to do LF->CRLF
#
# - Jon
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
-DOSFILTER = perl -p -e 's/\n/\r\n/'
+DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
+CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
+#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
+# If your SF user name differs from your local one,
+# change this to "ssh -l sf-username"
+SSH = ssh
+WWW_ROOT = /home/project-web/ijbswa
#############################################################################
-# Setup for make distribution rh and suse for now
+# Setup for make distribution for now.
#############################################################################
-TAR_ARCH = /tmp/ijbswa-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
-TMPFILE = mktemp -q /tmp/$(PROGRAM).XXXXXX
+TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
+
+#############################################################################
+# We include these files in our distributions
+#############################################################################
+CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
+# take care that no CVS .cvsignore or other crappy files
+# are included here
+# and escape every '#' in the find. doh.
+CONFIG_FILES = $(CONFIGS) \
+ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
+
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
+ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
+ `find doc/webserver/ -name "*.css"` \
+ $(MAN_PAGE)
#############################################################################
# Filenames and libraries
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
+W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
-W32_INIS = @WIN_ONLY@config.txt trust.txt re_filterfile.txt
+W32_INIS = @WIN_ONLY@config.txt trust.txt
PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
-# No REGEX (Either because dynamically linked pcreposix, or no regex at all):
+# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
-# GNU REGEX:
-@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
-# PCRE REGEX:
-@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
+@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
REGEX_HDRS = $(REGEX_SRC:.c=.h)
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-# Add your flags here
-OTHER_CFLAGS =
+# Add your flags here
+OTHER_CFLAGS =
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
- @STATIC_PCRE_ONLY@ -Ipcre
+ @STATIC_PCRE_ONLY@ -Ipcre
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
#
# There should NOT be any targets above this line.
#############################################################################
-all: $(PROGRAM)
+all: $(PROGRAM) default.action
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install
-
+.PHONY: all inifiles solaris-dist \
+win-dist tarball-dist dok webserver clean clobber tags \
+install CONF_DEST LOG_DEST \
+PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Define this explicitly because Solaris is broken!
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+#############################################################################
+# Strip master copy comments from default.action:
+#############################################################################
+default.action: default.action.master
+ $(GREP) -v '^#MASTER#' default.action.master > $@
#############################################################################
# Win32 config files
#############################################################################
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
- -e 's!\logfile logfile!logfile junkbuster.log!' \
- -e 's!\re_filterfile re_filterfile!re_filterfile re_filterfile.txt!' \
+ -e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
$(DOSFILTER) > $@
- # LF to CRLF in ijb.action
- $(DOSFILTER) <ijb.action >ijb.action.txt && mv ijb.action.txt ijb.action
+ # LF to CRLF in default.action
+ $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
+ # LF to CRLF in default.filter
+ $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
- $(DOSFILTER) < $< > $@
+ $(DOSFILTER) < $< > $@
-re_filterfile.txt: re_filterfile
- $(DOSFILTER) < $< > $@
+#############################################################################
+# Pre-dist check:
+#############################################################################
+dist-check:
+ @if [ -d CVS ]; then \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** WARNING ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
+ $(ECHO) "*** that you are trying to build a distribution ***"; \
+ $(ECHO) "*** package based on a checked out, not an ***"; \
+ $(ECHO) "*** exported copy of the source tree. Please ***"; \
+ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
+ $(ECHO) "*** developer manual. ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
+ $(ECHO) -n "really want to proceed: "; \
+ read answer; \
+ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
+ fi;
#############################################################################
-# redhat distribution alpha and x86
+# create tar.gz from CVS:
+# This make-target is usually called through 'create-archive'. If you
+# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
+# tar.gz with the current date in the name and as a releasenumber in the
+# spec-file. But the main usage is to run it as follows (Red Hat example):
+# make SNAPVERSION=1.6x create-snapshot
+# This creates a tar.gz.
#############################################################################
+create-snapshot:
+ @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
+ [ x"$$tag" = x"(none)" ] && tag=HEAD; \
+ echo "*** Creating package from $$tag!"; \
+ TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
+ cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
+ cd $$TMPDIR/current; \
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" \
+ -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
+ $(RM) -rf $$TMPDIR
+ @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
-redhat-dist:
- @for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit; \
- fi; \
- done ; \
- $(MAKE) clobber; \
- [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH); \
- $(SED) 's/^\(Version:\).*/\1 $(RPM_VERSION)/g; \
- s/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' junkbuster-rh.spec > $(TMPFILE) && $(MV) -f $(TMPFILE) junkbuster-rh.spec; \
- $(TAR) --exclude "CVS" --exclude "junkbuster-suse.spec" -cvzf $(TAR_ARCH) . ; \
- $(RPM) --clean -ta $(TAR_ARCH); \
- [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH)
-
-#
-# anonymously ncftps the rpms to sourceforge
-#
-redhat-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
#############################################################################
-# sun solaris distribution
+# looks at the version of Makefile and exports a corresponding source-tree
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# privoxy-*-2.4.13.tar.gz.
#############################################################################
-solaris-dist:
- @$(ECHO) coming soon.
+create-archive:
+ make SNAPVERSION=$(SNAPVERSION) create-snapshot
#############################################################################
-# suse distribution (need to be root to build)
+# generic distribution
#############################################################################
-
-suse-dist:
- @make clobber
-# verify that i'm root needs to be done
- rm -f ../ijbswa.tar.gz
-# verify all version strings, FLAGS, etc. in the spec file
- sed 's/^\(Version:\).*/\1: $(RPM_VERSION)/g; \
- s/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' junkbuster-suse.spec > $(TMPFILE) && mv -f $(TMPFILE) junkbuster-suse.spec
- tar --exclude "CVS" --exclude "junkbuster-rh.spec" -cvzf ../ijbswa.tar.gz .
-# verify all files in their correct location needs to be done
-# never use buildroot to define the location inside the spec
-# file or suse will fuck up the build process.
- cd .. && rpm -ta --buildroot /tmp/xxx ijbswa.tar.gz
- chmod a+r /usr/src/packages/SRPMS/*
- chmod a+r /usr/src/packages/RPMS/i386/*
-
-#
-# anonymously ncftps the rpms to sourceforge
-#
-suse-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/SRPMS/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/RPMS/*/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+gen-dist: dist-check
+ @$(ECHO) ""
+ @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
+ @$(ECHO) ""
+ $(MAKE) $(PROGRAM)
+ $(STRIP_PROG) $(PROGRAM)
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+# add program
+ (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+# add config files
+ for foo in $(CONFIG_FILES); do \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add documentation
+ for foo in $(DOC_FILES); do \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Distribution with binary created.
+
+# anonymously ncftps the package to sourceforge
+gen-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
-# handle with care. use with root.
-suse-clean:
- rpm -e junkbuster-suse
- rm -rf /etc/junkbuster
- rm -rf /var/log/junkbuster
- rm -f /etc/init.d/junkbuster
- rm -f /usr/sbin/junkbuster
- rm -f /usr/sbin/rcjunkbuster
- rm -f /usr/share/man/man1/junkbuster.1.gz
+# use with care
+gen-clean:
+ $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
#############################################################################
-# Windows distribution
+# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
+# (FIXME:) only parts of the static / generated docs mix in doc/webserver
#############################################################################
-win-dist:
- $(ECHO) Not implemented.
+tarball-dist: dist-check clean clobber
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
-#############################################################################
-# Tarball distribution
-#############################################################################
-tarball-dist:
- @make clean
- make $(PROGRAM)
-# remove all objects and create the tarball with the binary
- cd .. && $(RM) ijb/a.out ijb/core ijb/*.@OBJEXT@ && tar --exclude "ijb/CVS" -cvzf ../ijb-distribution-$(VERSION).tar.gz ijb/
- chmod a+r ../../ijb-distribution-$(VERSION).tar.gz
- @$(ECHO) Tarball with binary created.
+ for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
+ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
+ -name "PACKAGERS" \)`; do \
+ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
+ done && \
+ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
+
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Tarball distribution created.
+
+# anonymously ncftps the tarball to sourceforge
+tarball-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+tarball-clean:
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
#############################################################################
#
# Documentation
#
-# converts doc/source/*.sgml into html, text and man pages
+# converts doc/source/*.sgml into html and man pages
#
#############################################################################
-dok: doc/source/ldpOK.dsl
- mkdir -p doc/text doc/man
-# user manual
- rm -rf doc/webserver/user-manual
- cd doc/source && db2html -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver
- cd doc/source && db2html -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source && db2html -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver
- cd doc/source && db2html -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
-## faq
- rm -rf doc/webserver/faq
- cd doc/source && db2html -s ldpOK.dsl faq.sgml && mv faq ../webserver
- cd doc/source && db2html -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-
-redhat-dok: doc/source/ldpOK.dsl
- mkdir -p doc/text doc/man doc/source/user-manual \
- doc/source/developer-manual doc/source/faq
-## user manual
- rm -rf doc/webserver/user-manual
- cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
- mv user-manual ../webserver
- cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
- user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
- cd .. && mv developer-manual ../webserver
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
- developer-manual
-## faq
- rm -rf doc/webserver/faq
- cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-
-doc/source/ldpOK.dsl:
- if [ "$(DKPREFIX)" != "none" ]; then \
- sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
+
+# developer manual
+dok-devel:
+ $(RM) doc/webserver/developer-manual/*.html
+ $(RM) -r doc/source/developer-manual
+ mkdir -p doc/source/developer-manual
+ cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
+
+# user manual
+dok-user:
+ $(RM) doc/webserver/user-manual/*.html
+ $(RM) -r doc/source/user-manual/
+ mkdir -p doc/source/user-manual
+ cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
+ # FIXME: temp fix so same stylesheet gets in more than one place so it works
+ # for all doc set-ups, including the 'user manual' config option in local
+ # system where it MUST be in same directory as html.
+ $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
+
+# faq
+dok-faq:
+ $(RM) doc/webserver/faq/*.html
+ $(RM) -r doc/source/faq
+ mkdir -p doc/source/faq
+ cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
+
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
+ $(RM) doc/man/* doc/webserver/man-page/*.html
+ echo MAN2HTML is $(MAN2HTML)
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
+ man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html; \
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
else \
- cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
- fi
+ $(MAKE) groff2html; \
+ fi;
+
+# Build man page from sgml. This requires the SGMLSpm perl module.
+# See CPAN, or your favorite perl repository. This is the preferred
+# target for man page generation!
+man: dok-release
+ mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
+ nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' $(MAN_PAGE) ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE)
+
+# For those with man2html ala RH7s.
+man2html:
+ mkdir -p doc/webserver/man-page
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html; \
+ $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html; \
+ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html; \
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html; \
+ $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*; \
+ else \
+ $(MAKE) groff2html; \
+ fi;
+
+# Otherwise we get plain groff conversion.
+groff2html:
+ $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+
+
+# readme page and INSTALL file
+dok-readme: dok-release
+ cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../README ;\
+ $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
+ $(RM) tmp.*
+
+# index.sgml is used to create both the Home Page, and a local index
+# for documentation, etc.
+#
+# index.html for webserver:
+dok-webserver:
+ cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/'\
+ doc/webserver/index.html && $(RM) doc/webserver/*.bak
+
+# privoxy-index.html for local documentation:
+dok-index:
+ cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/' \
+ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
+
+# Main documentation target.
+dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
+ @$(ECHO) Documentation created.
+
+## Make AUTHORS file
+dok-authors:
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
+ tmp.html > ../../AUTHORS && $(RM) tmp.html
+
+# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
+# exceptions accordingly. This needs to go before any doc building (doh).
+dok-release:
+ @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
+ @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
+ s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
+ doc/source/*sgml doc/source/*/*sgml
+ $(RM) -r doc/source/*bak doc/source/*/*bak
+ @if [ $(CODE_STATUS) = "stable" ]; then \
+ $(ECHO) Setting docs to stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ else \
+ $(ECHO) Setting docs to not stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/; \
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ fi;
+ $(RM) -r doc/source/*bak doc/source/*/*bak;
+
+# Create release announcement in text and html, with short and long versions.
+# This is a standalone target, and must be invoked directly.
+# announce: dok-release
+# mkdir -p $(DOC_TMP)
+# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
+# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
+# cd $(DOC_TMP) && $(DB) announce.sgml &&\
+# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
+# mv -f *html *txt ../../..
+# rm -fr $(DOC_TMP)
+
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing. The new file is outputted
+# as config.new so that problem sections can be compared to previous
+# version. This is hardcored to w3m for html/text conversion. Also,
+# requires the shell util 'fmt'.
+config-file: dok-release
+ cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -i.bak utils/prepare-configfile.pl config.new
+
+ $(RM) *.bak
+ @$(ECHO) "****************************************************"
+ @$(ECHO) "The output file is config.new."
+ @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "In particular, check the Debug levels, the"
+ @$(ECHO) "permit-access, forward & socks examples and the"
+ @$(ECHO) "various user-manual examples, which all"
+ @$(ECHO) "probably got hammered."
+ @$(ECHO) "****************************************************"
+
+# config file, alternate version using lynx (perl stuff unfinished). Lynx
+# does not do so good a job.
+config-file-alt:
+ cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
+ $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -pi -e 's/^( )//;\
+ s/:$\/:\n/' config.new
#############################################################################
#
# moves dokumentation to webserver
#
#############################################################################
-webserver:
+webserver: clean-editor-files
@$(ECHO) -------------------------------------------------------
- @$(ECHO) You have run make dok/redhat-dok before, right?
- @$(ECHO) Note that this command scps all stuff to the webserver,
- @$(ECHO) it will not remove obsolete documents.
+ @$(ECHO) You will need to "create" a SF shell first:
+ @$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create
+ @$(ECHO) Please make sure your documentation files are up to date.
+ @$(ECHO) Note that this command updates the home page and copys
+ @$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
+ @$(ECHO) Note that a botched upload can result in the documentation
+ @$(ECHO) on the website becoming unreachable! Also the CSS files
+ @$(ECHO) currently seem to end up at the wrong place.
@$(ECHO) -------------------------------------------------------
- chmod -R a+r doc/webserver
- find doc/webserver -type d -exec chmod a+rx {} \;
- cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
+
+ @$(ECHO) Replacing the user-manual symlink
+ @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \
+ && mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual"
+
+ @$(ECHO) Uploading html
+ @cd doc/webserver; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+
+ @$(ECHO) Fixing permissions
+ @$(SSH) shell.sourceforge.net 'chmod -R 775 $(WWW_ROOT)/htdocs 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+
+web-actions: clean-editor-files
+ @$(ECHO) Uploading
+ @cd doc/webserver/actions; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd $(WWW_ROOT)/htdocs/actions; tar xvm'
+
+ @$(ECHO) Fixing permissions
+ @$(SSH) ijbswa.sourceforge.net 'find $(WWW_ROOT)/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
+ @$(SSH) ijbswa.sourceforge.net 'chmod 666 $(WWW_ROOT)/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+
+##
+dok-put:
+ tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
+ --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
+ doc/* INSTALL LICENSE AUTHORS README \
+ -czf $(DOC_FILE) ;\
+ $(ECHO) "Uploading doc package ..." ;\
+ scp $(DOC_FILE) ijbswa.sourceforge.net:$(WWW_ROOT)/htdocs/docs/
+ @$(SSH) ijbswa.sourceforge.net 'chmod 775 $(WWW_ROOT)/htdocs/docs/*gz 2>/dev/null; true'
+ $(RM) $(DOC_FILE)
+
+dok-get:
+ cd /tmp ;\
+ $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
+ $(TAR) -zxvf $(DOC_FILE)
+
+#############################################################################
+#
+# Try to clean up the generated HTML files.
+#
+# The files are a such a mess that some of them require two tidy runs
+# in row as the first abort prematurely. The vanilla tidy output renders
+# poorly as it contains a bit too much white-space, so we additionally run
+# the files through perl to fix this again.
+#
+#############################################################################
+dok-tidy:
+ for html_file in `find doc/webserver -name "*.html"`; do \
+ $(TIDY) $$html_file || $(TIDY) $$html_file; \
+ $(PERL) -i'' -e 's@^\s*<br>\s*$$@@; s@ +$$@@;' -n -p $$html_file; \
+ done
+
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
# Win32
w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
+win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/junkbust.ico config.h
+w32.res: w32.rc w32res.h icons/radar-01.ico icons/radar-02.ico icons/radar-03.ico icons/radar-04.ico icons/radar-05.ico icons/radar-06.ico icons/radar-07.ico icons/radar-08.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@else
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
+@AMIGAOS_ONLY@endif
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS)
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
+ `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
-clobber: clean
- $(RM) $(PROGRAM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` TAGS junkbuster.log config.cache *~ *.tar.gz
+clean-editor-files:
+ $(RM) `find . -name "*~"`
+ $(RM) `find . -name "#*#"` # Emacs backup files
+ $(RM) `find . -name ".\#*"`
-tags: $(SRCS) $(HDRS)
- etags $(SRCS) $(HDRS)
+clobber: clean-editor-files
+ $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
+ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
+ $(RM) -r autom4te.cache
-tarball-src: clobber
- $(LN) -s current ../ijb-$(VERSION)-$(CODE_STATUS)
- $(TAR) -C.. -cvhzf ijb-$(VERSION)-$(CODE_STATUS)-src.tar.gz ijb-$(VERSION)-$(CODE_STATUS)
- $(RM) ../ijb-$(VERSION)-$(CODE_STATUS)
-
-install: all
- #
- # FIXME: This is a dirty hack to have an install target
- # that works at least for some setups. This needs
- # to be fixed!
- #
- $(STRIP_PROG) $(PROGRAM)
- $(INSTALL) $(PROGRAM) $(SBIN_DEST)
- mkdir -p $(DEST)/user-manual
- mkdir -p $(DEST)/templates
- cp -r doc/webserver/user-manual $(DEST)
- cp -r templates $(DEST)
- $(INSTALL) config ijb.action re_filterfile trust $(DEST)
- # FIXME $(ECHO) junkbuster.logrotate junkbuster.monthly junkbuster.weekly
- # FIXME: Need new manual! $(GZIP_PROG) -c junkbuster.1 > $(MAN_DEST)/junkbuster.1.gz
- $(INSTALL) junkbuster.init /etc/init.d/junkbuster
+#
+# FIXME: What is all this?
+#
+ $(RM) cscope.* *.pdb *.lib *.exp
+distclean: clobber
-#############################################################################
+tags: $(SRCS) $(HDRS)
+ etags $(SRCS) $(HDRS)
-## Local Variables:
-## tab-width: 3
-## end:
+CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
+ $(ECHO) "$(CONF_BASE)/privoxy";\
+ else\
+ $(ECHO) "$(CONF_BASE)";\
+ fi)
+
+LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
+ $(ECHO) "/var/log/privoxy" ;\
+ else\
+ $(ECHO) "$(LOGS_DEST)";\
+ fi)
+
+PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
+ $(ECHO) "/var/run" ;\
+ else\
+ $(ECHO) "$(PIDS_DEST)";\
+ fi)
+
+check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
+ $(ECHO) "1";\
+ else\
+ $(ECHO) "0";\
+ fi)
+
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
+
+install-strip:
+ $(MAKE) install STRIP=-s
+
+# FIXME: Test USER and GROUP on Slack to make sure this works as
+# intended.
+#
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
+# Perhaps the whole user/group validation should be done here, and simplified.
+PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ @# Quick test for valid USER.
+ @if [ -n "$(USER)" ]; then \
+ $(ID) $(USER) >/dev/null || exit 1;\
+ fi
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# for file ownership purposes.
+# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
+# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+# fi
+
+ @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
+ $(CHMOD) $(DIR_MODE) $(MKDIR)
+ @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
+ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
+ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
+ @# Install the executable binary, strip if invoked as install-strip
+ @test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
+ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
+
+ @# Install the DOCS and man page. install-sh only does one file at a time.
+ @# FIXME: only handles jpegs.
+ -@if [ $(check_doc) = 0 ]; then \
+ DOC=$(DOC_DEST) ;\
+ else \
+ DOC=$(prefix)/doc/privoxy ;\
+ fi;\
+ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
+ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
+ if [ -d "$(DOK_WEB)" ]; then \
+ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
+ for i in user-manual developer-manual faq; do \
+ for ii in $(DOK_WEB)/$$i/*html; do \
+ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
+ done ;\
+ done ;\
+ for i in $(DOK_WEB)/user-manual/*jpg; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
+ done ;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
+ fi
+ @# Not all platforms support gzipped man pages.
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
+ -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
+
+ @# Change the config file default directories according to the configured ones
+ @$(ECHO) Rewriting config for this installation
+ @if [ -f config.base ] ; then \
+ $(CAT) config >config~ ;\
+ $(MV) config.base config ;\
+ fi
+ $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
+ -@if [ $(check_doc) = 0 ]; then \
+ $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
+ else \
+ $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
+ fi;\
+ $(MV) config config.base
+ $(MV) config.updated config
+
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
+ @# configure. Later, install init script if appropriate.
+ @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
+ @for i in `find templates -type f`; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
+ done
+
+ @# FIXME: group/user validation is overly convoluted.
+ @# If superuser install ... we require a minimum of group ownership
+ @# of those files the daemon writes to, to be non-root owned.
+ @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ if [ x$(USER) = x ] || [ $(USER) = root ]; then \
+ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
+ if [ "`$(ID) privoxy`" ] && \
+ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
+ $(ECHO) "Warning: Setting group owner to privoxy";\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
+ $(ECHO) " and to install the config files as that user and/or group!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
+ else \
+ GROUP_T=$(GROUP) ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
+ else \
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
+ GROUP_T=$(GROUP_T) ;\
+ fi ;\
+ else \
+ if [ ! "`id $(USER)`" = "`id`" ] ;then \
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R)" ;\
+ fi ;\
+ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
+ $(ECHO) Installing fresh $$i;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ elif [ -s "$(CONF_DEST)/$$i" ]; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
+ fi ;\
+ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ x$$USER != x ]; then \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ if [ x$$GROUP_T != x ]; then \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
+ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
+ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
+ fi ;\
+ else \
+ $(ECHO) "No init script installed, install it manually if needed" ;\
+ fi
+ $(RM) config.base config.tmp
+ @# mmmmm, good.
+ @$(ECHO) "$(PROGRAM_V) installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
+
+# rmdir is used as a precaution since it will not remove non-empty
+# directories. RH init script creates lock file and pid file.
+uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
+ @$(ECHO) Starting Privoxy uninstallation
+ @# KILL privoxy if running
+ @# XXX: the chkconfig line may need a DESTDIR prefix.
+ -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
+ -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
+
+ @# Program binary
+ @$(ECHO) Removing $(PROGRAM) binary
+ $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+
+ @# config files and dir, and maybe old install backups
+ -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ cd $(DESTDIR)$(CONF_DEST) ;\
+ for i in $(DESTDIR)$(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ done ;\
+ fi
+ @$(ECHO) Removing $(PROGRAM) config files
+ -@for i in $(DESTDIR)$(CONFIGS); do \
+ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
+ done
+ -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
+
+ @# man page and docs
+ @$(ECHO) Removing $(PROGRAM) docs
+ -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)*
+ -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
+
+ @# Log and pidfile
+ @$(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
+
+ @# Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ @$(ECHO) Removing $(PROGRAM) directories
+ @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
+ @if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
+ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
+ $(ECHO) Removing $(DESTDIR)$(prefix) ;\
+ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
+ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
+ fi;\
+ fi
+
+ @# init scripts
+ @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f $(DESTDIR)/etc/slackware-version ] && \
+ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
+ fi
+ @$(ECHO) Privoxy uninstalled, bye
+
+coffee:
+ @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
+ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
+ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
+ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
+ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
+ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
+ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat