# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.85 2002/04/14 01:05:34 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.177 2009/01/13 16:44:32 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 the SourceForge
+# Written by and Copyright (C) 2001 - 2008 the SourceForge
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
+RPM_PACKAGEV = ""
+SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
#############################################################################
-# Directories for "make install"
+# "make install" directories and variables
#############################################################################
-DEST = @prefix@
-CONFDEST = @prefix@@sysconfdir@
-SBIN_DEST = @prefix@@sbindir@
-MAN_DEST = @prefix@@mandir@
-DOK_WEB_USEM=doc/webserver/user-manual
+#User Group paras
+USER = @USER@
+GROUP = @GROUP@
+
+datarootdir = @datarootdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+CONF_BASE = @sysconfdir@
+SBIN_DEST = @sbindir@
+MAN_DIR = @mandir@
+MAN_DEST = $(MAN_DIR)/man1
+SHARE_DEST = @datadir@
+DOC_DEST = $(SHARE_DEST)/doc/privoxy
+VAR_DEST = @localstatedir@
+LOGS_DEST = $(VAR_DEST)/log/privoxy
+PIDS_DEST = $(VAR_DEST)/run
+
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# by the target rule CONF_DEST
+#
+# also if the $prefix is /usr/local and there is no
+# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
+# instead in this situation
+#
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# changes this to /var for storing the logs and pidfile
+
+# used in source dir only, the install goes to $share_dest/doc/privoxy
+DOK_WEB = doc/webserver/
+
+# Install usage should be compatible with install-sh.
+INSTALL = @INSTALL@
+# Binaries
+BIN_MODE = 0755
+# Support files, docs, etc.
+RA_MODE = 0664
+# Directory
+DIR_MODE = 0755
+# Files daemon writes to.
+RWD_MODE = 0660
+INSTALL_P = -m $(BIN_MODE)
+INSTALL_T = -m $(RA_MODE)
+INSTALL_D = -m $(DIR_MODE) -d
+INSTALL_R = -m $(RWD_MODE)
+
+# install options for superuser install
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
-#INSTALL = cp -f
-INSTALL = @INSTALL@
-INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
-INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
-INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
+
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
+ID = id
LD = @CC@
RM = rm -f
+CP = cp -f
+RMDIR = rmdir
+MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
+GREP = grep
CAT = cat
RPM = rpm
-MV = mv
+RPMBUILD = rpmbuild
+MV = mv
TAR = tar
LN = ln
+TOUCH = touch
+KILL = kill
+CHMOD = chmod
+CHOWN = chown
+CHGRP = chgrp
+GROUPS = groups
WDUMP = @WDUMP@ -dump
JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
-DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldpOK.dsl\#html
+DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
DB2HTML = @DB2HTML@
-DKPREFIX = @DKPREFIX@
MAN2HTML = @MAN2HTML@
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
PERL = perl
-
-#User Group paras
-USER = @USER@
-GROUP = @GROUP@
+DOC_DIR = doc/source
+DOC_TMP = $(DOC_DIR)/tmp
+DOC_STATUS = @DOC_STATUS@
# Program to do LF->CRLF
#
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
+CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
+#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
# Setup for make distribution rh and suse for now
#############################################################################
# We include these files in our distributions
#############################################################################
+CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
-CONFIG_FILES = config trust \
- default.action \
- basic.action intermediate.action advanced.action \
- default.filter \
+CONFIG_FILES = $(CONFIGS) \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
-DOC_FILES = AUTHORS LICENSE README ChangeLog \
- `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
- `find doc/webserver/ -name "*.html"` \
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
+ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
privoxy.1
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
+W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
W32_INIS = @WIN_ONLY@config.txt trust.txt
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
@STATIC_PCRE_ONLY@ -Ipcre
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
#
# There should NOT be any targets above this line.
#############################################################################
-all: $(PROGRAM)
+all: $(PROGRAM) default.action
#############################################################################
#############################################################################
.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install
-
+install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
+PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Define this explicitly because Solaris is broken!
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+#############################################################################
+# Strip master copy comments from default.action:
+#############################################################################
+default.action: default.action.master
+ $(GREP) -v '^#MASTER#' $< > $@
+
#############################################################################
# Win32 config files
#############################################################################
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
-e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
trust.txt: trust
$(DOSFILTER) < $< > $@
-re_filterfile.txt: re_filterfile
- $(DOSFILTER) < $< > $@
-
-
#############################################################################
# Pre-dist check:
#############################################################################
fi;
+#############################################################################
+# create tar.gz from CVS:
+# This make-target is usually called through 'create-archive'. If you
+# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
+# tar.gz with the current date in the name and as a releasenumber in the
+# spec-file. But the main usage is to run it as follows (Red Hat example):
+# make SNAPVERSION=1.6x create-snapshot
+# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+#############################################################################
+create-snapshot:
+ @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
+ [ x"$$tag" = x"(none)" ] && tag=HEAD; \
+ echo "*** Creating package from $$tag!"; \
+ TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
+ cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
+ cd $$TMPDIR/current; \
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-rh.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-rh.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi;\
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-suse.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-suse.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi; \
+ $(RM) $$TMPFILE; \
+ cd $$TMPDIR/current; \
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" \
+ -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
+ $(RM) -rf $$TMPDIR
+ @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
+
+
+#############################################################################
+# looks at the version of Makefile and exports a corresponding source-tree
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
+# Red Hat and one for SuSe (different spec-files)
+#############################################################################
+create-archive:
+ make SNAPVERSION=$(SNAPVERSION) create-snapshot
+
#############################################################################
# RPM specifice stuff (SuSE or Redhat, ..)
#############################################################################
fi; \
done; \
+check-release:
+ @if [ "$(RPM_PACKAGEV)" = "" ]; then \
+ echo ; \
+ echo " ERROR: NO RPM_PACKAGEV VALUE"; \
+ echo " No value given for RPM_PACKAGEV. Please use:"; \
+ echo " make dist-upload RPM_PACKAGEV=release"; \
+ echo " where \"release\" is the release number you want to and"; \
+ echo " where \"dist\" is the name of the distro (redhat or suse)"; \
+ echo ; \
+ echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
+ echo ""; \
+ echo "ATTENTION: If your distribution use a specific tag on the"; \
+ echo " release field (like \"cl\" for Conectiva, and"; \
+ echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
+ echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
+ echo " Do it like you would do for a redhat package,"; \
+ echo " (i.e. just the number)."; \
+ echo ; \
+ exit 1; \
+ fi
+
+
+#############################################################################
+# Create Conectiva specfile from RedHat specfile
+#############################################################################
+conectiva-spec:
+ $(RM) privoxy-cl.spec
+ chmod a+x genclspec.sh
+ ./genclspec.sh
+
+#############################################################################
+# Conectiva distribution for x86
+#############################################################################
+conectiva-dist: rpm-stuff conectiva-spec
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+conectiva-upload: check-release
+ make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
+
#############################################################################
# redhat distribution alpha and x86
#############################################################################
redhat-dist: rpm-stuff
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- privoxy-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
+# For testing build issues only! Use redhat-dist for official releases.
+redhat-test:
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -tb $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+ @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
# anonymously ncftps the rpms to sourceforge
-redhat-upload:
+redhat-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+
+#############################################################################
+# Creates a Red Hat sourcepackage from CVS (not from the current sources
+# on disk)
+#############################################################################
+redhat-srpm:
+ make create-archive
+ $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
+
+
#############################################################################
# suse distribution. works fine. no need to be root.
#############################################################################
suse-dist: rpm-stuff
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- privoxy-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
+# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+# privoxy-suse.spec > $$TMPFILE ; then \
+# $(MV) -f $$TMPFILE privoxy-suse.spec; \
+# else \
+# $(ECHO) "Could not set version info in specfile."; \
+# exit 1;\
+# fi
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# anonymously ncftps the rpms to sourceforge
-suse-upload:
+suse-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# handle with care. use with root.
suse-clean:
- rpm -e junkbuster-suse || true
- rm -rf /etc/junkbuster
- rm -rf /etc/rc.d/junkbuster*
- rm -rf /var/run/junkbuster.pid
- rm -rf /var/log/junkbuster
- rm -f /etc/init.d/junkbuster
- rm -f /usr/sbin/junkbuster
- rm -f /usr/sbin/rcjunkbuster
- rm -f /usr/share/man/man1/junkbuster.1.gz
- rpm -e privoxy-suse || true
- rm -rf /etc/privoxy
- rm -rf /etc/rc.d/privoxy*
- rm -rf /var/run/privoxy.pid
- rm -rf /var/log/privoxy
- rm -f /etc/init.d/privoxy
- rm -f /usr/sbin/privoxy
- rm -f /usr/sbin/rcprivoxy
- rm -f /usr/share/man/man1/privoxy.1.gz
+ $(RPM) -e junkbuster-suse || true
+ $(RM) -r /etc/junkbuster
+ $(RM) -r /etc/rc.d/junkbuster*
+ $(RM) -r /var/run/junkbuster.pid
+ $(RM) -r /var/log/junkbuster
+ $(RM) /etc/init.d/junkbuster
+ $(RM) /usr/sbin/junkbuster
+ $(RM) /usr/sbin/rcjunkbuster
+ $(RM) /usr/share/man/man1/junkbuster.1.gz
+ $(RPM) -e privoxy-suse || true
+ $(RM) -r /etc/privoxy
+ $(RM) -r /etc/rc.d/privoxy*
+ $(RM) -r /var/run/privoxy.pid
+ $(RM) -r /var/log/privoxy
+ $(RM) /etc/init.d/privoxy
+ $(RM) /usr/sbin/privoxy
+ $(RM) /usr/sbin/rcprivoxy
+ $(RM) /usr/share/man/man1/privoxy.1.gz
#############################################################################
# generic distribution
$(STRIP_PROG) $(PROGRAM)
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
# add program
- (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+ (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
# add config files
for foo in $(CONFIG_FILES); do \
- (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# add documentation
for foo in $(DOC_FILES); do \
- (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
- -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" \)`; do \
+ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
+ -name "PACKAGERS" \)`; do \
files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
done && \
- cd .. && $(TAR) cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
+ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
#
# Documentation
#
-# converts doc/source/*.sgml into html, text and man pages
+# converts doc/source/*.sgml into html and man pages
#
#############################################################################
-# our style file
-doc/source/ldpOK.dsl:
- if [ "$(DKPREFIX)" != "none" ]; then \
- sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
- else \
- cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
- fi
-
-# Otherwise we get plain groff conversion.
-groff2html:
- $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
-
# developer manual
-dok-devel: doc/source/ldpOK.dsl
- rm -f doc/webserver/developer-manual/*.html
- rm -rf doc/source/developer-manual
- mkdir -p doc/text doc/source/developer-manual
+dok-devel:
+ $(RM) doc/webserver/developer-manual/*.html
+ $(RM) -r doc/source/developer-manual
+ mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
# user manual
-dok-user: doc/source/ldpOK.dsl
- rm -f doc/webserver/user-manual/*.html
- rm -rf doc/source/user-manual/
- mkdir -p doc/text doc/source/user-manual
- cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
- cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
+dok-user:
+ $(RM) doc/webserver/user-manual/*.html
+ $(RM) -r doc/source/user-manual/
+ mkdir -p doc/source/user-manual
+ cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
+ # FIXME: temp fix so same stylesheet gets in more than one place so it works
+ # for all doc set-ups, including the 'user manual' config option in local
+ # system where it MUST be in same directory as html.
+ $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
# faq
-dok-faq: doc/source/ldpOK.dsl
- rm -f doc/webserver/faq/*.html
- rm -rf doc/source/faq
- mkdir -p doc/text doc/source/faq
+dok-faq:
+ $(RM) doc/webserver/faq/*.html
+ $(RM) -r doc/source/faq
+ mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-# man page
-dok-man: doc/source/ldpOK.dsl
- rm -f doc/man/* doc/webserver/man-page/*.html
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
+ $(RM) doc/man/* doc/webserver/man-page/*.html
ifneq ($(MAN2HTML),false)
$(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
$(MAKE) groff2html
endif
-# readme page
-dok-readme: doc/source/ldpOK.dsl
- cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\
- $(WDUMP) tmp.html > ../../README && rm -rf tmp.html
-
-# webserver files
-dok-webserver: doc/source/ldpOK.dsl
- cd doc/source/webserver && $(DB) -V nochunks index.sgml > ../../webserver/index.html
- $(PERL) -pi.bak -e 's/..\/p_doc.css/p_web.css/;\
- s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/'\
- doc/webserver/index.html && rm -f doc/source/webserver/*.bak
-
-# Main documentation target.
-dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver authors
-# kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
- @$(ECHO) Documentation created.
-
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver authors
-# kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
- @$(ECHO) Documentation created.
-
-# For those with man2html ala RH7's.
+# Build man page from sgml. This requires the SGMLSpm perl module.
+# See CPAN, or your favorite perl repository. This is the preferred
+# target for man page generation!
+man: dok-release
+ mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
+ nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
+
+# For those with man2html ala RH7s.
man2html:
mkdir -p doc/webserver/man-page
ifneq ($(MAN2HTML),false)
$(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
$(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
$(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
+# Twice because my version of man2html is pulling in commas and periods in URLs.
+ $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
+ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
# Get rid of spurious \a from conversion. (How to do this with perl?)
- $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && rm -f tmp.*
+ $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
else
$(MAKE) groff2html
endif
+
+# Otherwise we get plain groff conversion.
+groff2html:
+ $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+
+
+# readme page and INSTALL file
+dok-readme: dok-release
+ cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../README ;\
+ $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
+ $(RM) tmp.*
+
+# index.sgml is used to create both the Home Page, and a local index
+# for documentation, etc.
+#
+# index.html for webserver:
+dok-webserver:
+ cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/'\
+ doc/webserver/index.html && $(RM) doc/webserver/*.bak
+
+# privoxy-index.html for local documentation:
+dok-index:
+ cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/' \
+ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
+
+# Main documentation target.
+dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
+ @$(ECHO) Documentation created.
+
+#
+# an alternative to the above dok. disabled man page creation for the moment
+#
+redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
+ @$(ECHO) Documentation created.
+
## Make README
-redhat-readme: doc/source/ldpOK.dsl
- cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../README && rm -rf tmp.html
- # kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
+redhat-readme:
+ cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
+ tmp.html > ../../README && $(RM) -r tmp.html
## Make AUTHORS file
-authors: doc/source/ldpOK.dsl
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../AUTHORS && rm -f tmp.html
- # kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
-
-# make a man page, and then (lousy) HTML version.
-# Requires docbook2man (short perl script), see comments
-# in privoxy-man-page.sgml. This target is not invoked from other dok targets.
-# It is built separately due to dependencies on perl scripts.
-man: doc/source/ldpOK.dsl
- mkdir -p doc/source/man
- cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
- perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
- cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
- mv -f index.html privoxy-man-page.html
- # This html is not used. See make man2html.
- mv -f doc/source/man/privoxy.1 privoxy.1
- $(MAKE) man2html
- # kludge to force recreation on next run. Rodgrigo?
- @rm -fr doc/source/ldpOK.dsl doc/source/man
+dok-authors:
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
+ tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
# exceptions accordingly. This needs to go before any doc building (doh).
@$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
doc/source/*sgml doc/source/*/*sgml
- rm -fr doc/source/*bak doc/source/*/*bak
+ $(RM) -r doc/source/*bak doc/source/*/*bak
ifeq ($(CODE_STATUS),stable)
@$(ECHO) Setting docs to stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
doc/source/*sgml doc/source/*/*sgml
- rm -fr doc/source/*bak doc/source/*/*bak
+ $(RM) -r doc/source/*bak doc/source/*/*bak
else
@$(ECHO) Setting docs to not stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
doc/source/*sgml doc/source/*/*sgml
- rm -fr doc/source/*bak doc/source/*/*bak
+ $(RM) -r doc/source/*bak doc/source/*/*bak
endif
+# Create release announcement in text and html, with short and long versions.
+# This is a standalone target, and must be invoked directly.
+# announce: dok-release
+# mkdir -p $(DOC_TMP)
+# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
+# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
+# cd $(DOC_TMP) && $(DB) announce.sgml &&\
+# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
+# mv -f *html *txt ../../..
+# rm -fr $(DOC_TMP)
+
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing. The new file is outputted
+# as config.new so that problem sections can be compared to previous
+# version. This is hardcored to w3m for html/text conversion. Also,
+# requires the shell util 'fmt'.
+config-file: dok-release
+ cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -i.bak utils/prepare-configfile.pl config.new
+
+ $(RM) *.bak
+ @$(ECHO) "****************************************************"
+ @$(ECHO) "The output file is config.new."
+ @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "In particular, check the Debug levels, the"
+ @$(ECHO) "permit-access, forward & socks examples and the"
+ @$(ECHO) "various user-manual examples, which all"
+ @$(ECHO) "probably got hammered."
+ @$(ECHO) "****************************************************"
+
+# config file, alternate version using lynx (perl stuff unfinished). Lynx
+# does not do so good a job.
+config-file-alt:
+ cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
+ $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -pi -e 's/^( )//;\
+ s/:$\/:\n/' config.new
+
#############################################################################
#
# Webserver
@$(ECHO) it will not remove obsolete documents.
@$(ECHO) -------------------------------------------------------
- @$(ECHO) Uploading
+ @$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
$(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
@ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+##
+dok-put:
+ tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
+ --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
+ doc/* INSTALL LICENSE AUTHORS README \
+ -czf $(DOC_FILE) ;\
+ $(ECHO) "Uploading doc package ..." ;\
+ scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
+ @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
+ $(RM) $(DOC_FILE)
+
+dok-get:
+ cd /tmp ;\
+ $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
+ $(TAR) -zxvf $(DOC_FILE)
+
+
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
# Win32
w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
+win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@else
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
+@AMIGAOS_ONLY@endif
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags`
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
tidy:
$(RM) `find . -name "*~"`
-# $(RM) `find . -name "#*#"` # what is this for??
+ $(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
clobber: tidy
- $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar
+ $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
+ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
+ $(RM) -r autom4te.cache
+
#
# FIXME: What is all this?
#
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
-install: all
- #
- # FIXME: This is a dirty hack to have an install target
- # that works at least for some setups. This needs
- # to be fixed!
- #
- $(STRIP_PROG) $(PROGRAM)
- $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
- $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
- $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
- $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
- $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
- if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
- $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
- $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
- # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
- # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
- $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
+CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
+ $(ECHO) "$(CONF_BASE)/privoxy";\
+ else\
+ $(ECHO) "$(CONF_BASE)";\
+ fi)
+
+LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
+ $(ECHO) "/var/log/privoxy" ;\
+ else\
+ $(ECHO) "$(LOGS_DEST)";\
+ fi)
+
+PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
+ $(ECHO) "/var/run" ;\
+ else\
+ $(ECHO) "$(PIDS_DEST)";\
+ fi)
+
+check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
+ $(ECHO) "1";\
+ else\
+ $(ECHO) "0";\
+ fi)
+
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
+
+install-strip:
+ $(MAKE) install STRIP=-s
+
+# FIXME: Test USER and GROUP on Slack to make sure this works as
+# intended.
+#
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
+# Perhaps the whole user/group validation should be done here, and simplified.
+PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ @# Quick test for valid USER.
+ @if [ -n "$(USER)" ]; then \
+ $(ID) $(USER) >/dev/null || exit 1;\
+ fi
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# for file ownership purposes.
+# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
+# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+# fi
+
+ @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
+ $(CHMOD) $(DIR_MODE) $(MKDIR)
+ @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
+ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
+ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
+ @# Install the executable binary, strip if invoked as install-strip
+ @test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
+ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
+
+ @# Install the DOCS and man page. install-sh only does one file at a time.
+ @# FIXME: only handles jpegs.
+ -@if [ $(check_doc) = 0 ]; then \
+ DOC=$(DOC_DEST) ;\
+ else \
+ DOC=$(prefix)/doc/privoxy ;\
+ fi;\
+ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
+ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
+ if [ -d "$(DOK_WEB)" ]; then \
+ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
+ for i in user-manual developer-manual faq; do \
+ for ii in $(DOK_WEB)/$$i/*html; do \
+ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
+ done ;\
+ done ;\
+ for i in $(DOK_WEB)/user-manual/*jpg; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
+ done ;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
+ fi
+ @# Not all platforms support gzipped man pages.
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
+
+ @# Change the config file default directories according to the configured ones
+ @$(ECHO) Rewriting config for this installation
+ @if [ -f config.base ] ; then \
+ $(CAT) config >config~ ;\
+ $(MV) config.base config ;\
+ fi
+ $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
+ -@if [ $(check_doc) = 0 ]; then \
+ $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
+ else \
+ $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
+ fi;\
+ $(MV) config config.base
+ $(MV) config.updated config
+
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
+ @# configure. Later, install init script if appropriate.
+ @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
+ @for i in `find templates -type f`; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
+ done
+
+ @# FIXME: group/user validation is overly convoluted.
+ @# If superuser install ... we require a minimum of group ownership
+ @# of those files the daemon writes to, to be non-root owned.
+ @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ if [ x$(USER) = x ] || [ $(USER) = root ]; then \
+ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
+ if [ "`$(ID) privoxy`" ] && \
+ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
+ $(ECHO) "Warning: Setting group owner to privoxy";\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
+ $(ECHO) " and to install the config files as that user and/or group!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
+ else \
+ GROUP_T=$(GROUP) ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
+ else \
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
+ GROUP_T=$(GROUP_T) ;\
+ fi ;\
+ else \
+ if [ ! "`id $(USER)`" = "`id`" ] ;then \
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R)" ;\
+ fi ;\
+ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
+ $(ECHO) Installing fresh $$i;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ elif [ -s "$(CONF_DEST)/$$i" ]; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
+ fi ;\
+ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ x$$USER != x ]; then \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ if [ x$$GROUP_T != x ]; then \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
+ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
+ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
+ $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
+ $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
+ $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
+ $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
+ $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
+ $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
+ fi ;\
+ else \
+ $(ECHO) "No init script installed, install it manually if needed" ;\
+ fi
+ $(RM) config.base config.tmp
+ @# mmmmm, good.
+ @$(ECHO) "$(PROGRAM_V) installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
+
+# rmdir is used as a precaution since it will not remove non-empty
+# directories. RH init script creates lock file and pid file.
+uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
+ @$(ECHO) Starting Privoxy uninstallation
+ @# KILL privoxy if running
+ @# XXX: the chkconfig line may need a DESTDIR prefix.
+ -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
+ $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
+ chkconfig --del $(PROGRAM) 2>/dev/null;\
+ fi
+ -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
+ -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
+
+ @# Program binary
+ @$(ECHO) Removing $(PROGRAM) binary
+ $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+
+ @# config files and dir, and maybe old install backups
+ -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ cd $(DESTDIR)$(CONF_DEST) ;\
+ for i in $(DESTDIR)$(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ done ;\
+ fi
+ @$(ECHO) Removing $(PROGRAM) config files
+ -@for i in $(DESTDIR)$(CONFIGS); do \
+ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
+ done
+ -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
+
+ @# man page and docs
+ @$(ECHO) Removing $(PROGRAM) docs
+ -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
+
+ @# Log and pidfile
+ @$(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
+
+ @# Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ @$(ECHO) Removing $(PROGRAM) directories
+ @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
+ @if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
+ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
+ $(ECHO) Removing $(DESTDIR)$(prefix) ;\
+ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
+ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
+ fi;\
+ fi
+
+ @# init scripts and logrotate
+ @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f $(DESTDIR)/etc/slackware-version ] && \
+ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
+ elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
+ && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
+ fi
+ @$(ECHO) Privoxy uninstalled, bye
+coffee:
+ @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
+ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
+ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
+ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
+ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
+ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
+ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
#############################################################################
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.177 2009/01/13 16:44:32 fabiankeil
+# Delete the standard.action file after moving
+# the pre-settings over to the default actions.
+#
+# Revision 1.176 2008/09/21 13:24:37 fabiankeil
+# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
+#
+# Revision 1.175 2008/08/30 12:03:07 fabiankeil
+# Remove FEATURE_COOKIE_JAR.
+#
+# Revision 1.174 2008/07/18 17:50:47 fabiankeil
+# Fix whitespace.
+#
+# Revision 1.173 2008/06/18 18:28:42 fabiankeil
+# Remove PDF-related stuff.
+#
+# Revision 1.172 2008/06/17 16:16:08 fabiankeil
+# - Stop building text files nobody cares about.
+# - Update copyright year.
+#
+# Revision 1.171 2008/06/13 15:24:57 fabiankeil
+# Move previously inline'd Perl code for the config-file target
+# into a separate file, have it work with older perl releases,
+# clean it up a bit and fix the "underlining" code.
+#
+# Revision 1.170 2008/06/12 16:38:50 fabiankeil
+# Add third-level domain to URL in dok-get target.
+#
+# Revision 1.169 2008/06/09 17:28:31 fabiankeil
+# - Recommend https for releasing files.
+# - Fix a warning about datarootdir being ignored.
+#
+# Revision 1.168 2008/05/23 18:03:12 fabiankeil
+# - Shorten meta description inserted in dok-webserver
+# and dok-index target.
+# - In config-file target, unset LANG for w3m as we
+# might otherwise end up with multi-byte characters.
+#
+# Revision 1.167 2008/05/23 14:39:09 fabiankeil
+# Silence dok-user complaint about @# not being found.
+#
+# Revision 1.166 2008/05/23 14:04:57 fabiankeil
+# - Get config-file target working with more recent Perl
+# versions. The generated file is still messed up, though.
+# - Fix comment typo.
+#
+# Revision 1.165 2008/05/22 16:57:23 fabiankeil
+# Fix coffee machine.
+#
+# Revision 1.164 2008/05/22 10:26:26 fabiankeil
+# - Remove parsers.@OBJEXT@'s dependency on encode.h.
+# - Include Emacs backup files in tidy target again.
+#
+# Revision 1.163 2008/05/04 18:01:53 fabiankeil
+# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
+#
+# Revision 1.162 2008/03/30 13:31:42 fabiankeil
+# Add DESTDIR support for the uninstall target.
+#
+# Revision 1.161 2008/03/30 13:19:13 fabiankeil
+# Add DESTDIR support for the install target. Closes PR#1910612.
+# Patch by Radoslaw Zielinski with minor modifications.
+#
+# Revision 1.160 2008/03/27 18:27:19 fabiankeil
+# Remove kill-popups action.
+#
+# Revision 1.159 2008/03/21 11:13:53 fabiankeil
+# Only gather host information if it's actually needed.
+# Also move the code out of accept_connection() so it's less likely
+# to delay other incoming connections if the host is misconfigured.
+#
+# Revision 1.158 2007/12/11 21:29:25 fabiankeil
+# Fix dependency list for cgiedit.c.
+#
+# Revision 1.157 2007/12/10 02:28:02 hal9
+# Unset $LANG for text processing of docs so we get pure text.
+#
+# Revision 1.156 2007/11/15 03:17:43 hal9
+# Some workaround changes to the config file perl stuff and comments, which is
+# broken here all by itself on perl 5.8.8.
+#
+# Revision 1.155 2007/09/22 16:23:25 fabiankeil
+# Update copyright line.
+#
+# Revision 1.154 2007/02/07 11:52:40 fabiankeil
+# Fix suse-dist as described in BR#1654052.
+# (I didn't test it, but it's done the same
+# way in redhat-dist which is known to work).
+#
+# Revision 1.153 2007/01/07 07:36:36 joergs
+# Added AmigaOS4 support.
+#
+# Revision 1.152 2006/12/13 14:53:51 etresoft
+# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
+#
+# Revision 1.151 2006/11/30 01:08:55 hal9
+# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
+#
+# Revision 1.150 2006/10/25 11:55:45 fabiankeil
+# Fix sed regexes for rewriting "confdir ." and "logdir .".
+# Thanks to Darel Henman for reporting this.
+#
+# Revision 1.149 2006/10/11 01:40:28 hal9
+# Apply patch from Neil McCalden to fix syntax issue.
+#
+# Revision 1.148 2006/09/26 10:57:58 hal9
+# Including Karsten's patch to fix make create-snapshot.
+#
+# Revision 1.147 2006/09/13 01:25:16 hal9
+# Make sure install forces in new default.action, default.filter, and
+# standard.filter. These are privoxy files, not user files.
+#
+# Revision 1.146 2006/09/08 23:57:19 hal9
+# User manual images are now user-manual doc directory, and fix make install
+# target accordingly.
+#
+# Revision 1.145 2006/09/08 02:32:00 hal9
+# Various changes to implement building and installing docs to be compatible
+# with the new "user-manual" settings in config from Roland. Docbook does not
+# seem to like dealing with more than one css file, so workaround that here.
+# Change 'make install' so it provides p_doc.css in the user-manual doc
+# directory so that functions well, and lastly modify 'make install' so that the
+# PATH is automatically set, and the 'user-manual' directive should done during
+# the install.
+#
+# Revision 1.144 2006/09/07 22:53:20 hal9
+# Make sure config sgml build related artifacts are cleaned out.
+#
+# Revision 1.143 2006/09/02 15:59:40 hal9
+# Add to code status to make install output.
+#
+# Revision 1.142 2006/08/29 01:46:24 hal9
+# Add user.filter to $CONFIGS.
+#
+# Revision 1.141 2006/08/12 03:54:37 david__schmidt
+# Windows service integration
+#
+# Revision 1.140 2006/07/18 14:48:45 david__schmidt
+# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
+# with what was really the latest development (the v_3_0_branch branch)
+#
+# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
+# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
+# only place it is used.
+#
+# Revision 1.104.2.27 2004/02/07 16:11:10 oes
+# Make clobber remove the autom4te.cache dir.
+# Closes BR #889300
+#
+# Revision 1.104.2.26 2004/01/31 16:32:25 oes
+# Adding a check for an htmldoc variant from the debian diff
+#
+# Revision 1.104.2.25 2004/01/31 01:15:33 oes
+# Fixed a typo; updated copyright notice
+#
+# Revision 1.104.2.24 2003/12/03 10:30:02 oes
+# - Added new dependency: actions.c -> ssplit.h
+# - Excluded PDF docs from src tarball
+#
+# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
+# Strip trailing spaces from config-file generation, bug #724596.
+#
+# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
+# Minor changes for Privoxy home page:
+# - Handle © more sanely
+# - include link to announce.txt
+# Also, disable 'make announce' target.
+#
+# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
+# Catch up with main trunk install/uninstall. Quiet output, etc.
+#
+# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
+# Port of make install, etc from main trunk. Needs testing! Add Slackware
+# support, and other related changes. Update related docs.
+#
+# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
+# New user-manual examples in config-file are getting wrapped. Add warning.
+#
+# Revision 1.104.2.18 2002/08/23 12:22:40 oes
+# Added warning to broken install target
+#
+# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
+# More (minor) cleanup of html before pdf processing to make some relative
+# links work as pdf -> pdf. Upload pdf as zip archive now.
+#
+# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
+# Added pdf docs to make webserver target.
+#
+# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
+# New targets for man page (make man) and pdf (make dok-pdf) targets.
+#
+# Revision 1.104.2.14 2002/08/10 11:19:37 oes
+# - Make -Ipcre (again) conditional on STATIC_PCRE
+# - $(RPMBUILD) -> $(RPM) for SuSE
+# - Add dependency: pcrs.o deps on config.h
+#
+# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
+# Remove pdf2 target, and make it dok-shtml (single page html for pdf
+# conversion).
+#
+# Revision 1.104.2.12 2002/08/06 11:29:36 oes
+# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
+#
+# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
+# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
+# *I think* it was supposed to be (was breaking upload targets since it was
+# set to RPM_VERSION).
+#
+# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
+# cleanups of the redhat-srpm target
+#
+# Revision 1.104.2.9 2002/07/26 15:17:02 oes
+# - Added generation of default.action from defaul.action.master
+# - Deleted obsolete re_filterfile.txt generation
+#
+# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
+# added helper targets to the makefile. They shouldn't break anything, but
+# make my life a lot easier.
+#
+# The new rpm has been splitted into two parts, one for package installation/
+# removal, one for package building.
+# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
+# by rpmbuild -ta (this is backwards compatible)
+#
+# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
+# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
+# thus breaking them completely.
+#
+# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
+# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
+# index.html and team/index.html)
+#
+# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
+# This is more cleanup on the make config-file target. Most issues for
+# automatic generation are taken care of. There are still some problems
+# that require hand editing. Namely, some of the examples that are > 80 chars.
+#
+# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
+# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
+# new target is 'make config-file', _not_ make config.
+#
+# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
+# 'make config' target added (WIP) for future generation of config file from
+# text in u-m so the two are in sync. New generated config, which requires
+# some hand editing for the time being.
+#
+# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
+# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
+# not being cleaned up in doc/webserver.
+#
+# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
+# Remove Table of Contents from readme with oes's dsl trick.
+#
+# Revision 1.104 2002/05/24 00:03:49 oes
+# Use p_doc.css for the Homepage for consistency
+#
+# Revision 1.103 2002/05/23 23:19:00 oes
+# Use dsl without TOC for the homepage
+#
+# Revision 1.102 2002/05/16 01:20:17 hal9
+# make announce target added.
+#
+# Revision 1.101 2002/05/15 12:28:46 oes
+# Trying to keep Hal happy :)
+#
+# Revision 1.100 2002/05/08 13:48:18 hal9
+# Ooops, that trashed JB v2.0.2 comment. Fixed.
+#
+# Revision 1.99 2002/05/08 13:42:07 hal9
+# This fixes the numbering problem on index.html in contact info section (.1.). Using
+# perl, since its way too convoluted to try to fix proper with docbook.
+#
+# Revision 1.98 2002/05/03 14:33:06 oes
+# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
+#
+# Revision 1.97 2002/04/27 20:27:43 swa
+# no longer needed due to new
+# PACKAGE_VERSION process
+#
+# Revision 1.96 2002/04/27 17:44:32 morcego
+# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
+# - Using the RM macro everywhere rm is called (either we use, or don't)
+# - Same for RPM
+#
+# Revision 1.95 2002/04/27 15:37:25 swa
+# replacing directory in document creation process
+# no longer necessary.
+#
+# Revision 1.94 2002/04/27 08:23:29 swa
+# pdf process reviewed and cleaned up
+#
+# Revision 1.93 2002/04/27 04:55:53 morcego
+# privoxy-cl.spec now gets removed by clobber target
+#
+# Revision 1.92 2002/04/27 04:53:40 morcego
+# Adding --exclude "PACKAGERS" to every tar command that applies (not for
+# webserver target)
+#
+# Revision 1.91 2002/04/27 04:44:51 morcego
+# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
+# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
+# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
+# conectiva-upload
+# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
+# for Conectiva Linux
+#
+# Revision 1.90 2002/04/26 17:46:53 swa
+# be consistent
+#
+# Revision 1.89 2002/04/26 17:20:54 swa
+# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
+#
+# Revision 1.88 2002/04/25 19:13:57 morcego
+# Removed RPM release number declaration on configure.in
+# Changed makefile to use given value for RPM_PACKAGEV when on uploading
+# targets (will produce an error, explaining who to do it, if no value
+# if provided).
+#
+# Revision 1.87 2002/04/23 14:10:59 swa
+# now create pdf documents
+#
+# Revision 1.86 2002/04/15 04:30:27 hal9
+# Missed two -pi.bak's on perl/cygwin problem.
+#
# Revision 1.85 2002/04/14 01:05:34 hal9
# Revert dok-webserver change for SF logo.
#