--------------------------------------------------------------------
ChangeLog for Privoxy
--------------------------------------------------------------------
-*** Since 3.0.10
+*** Version 3.0.22 stable ***
-- The mingw32 version uses mutex locks now which prevents
- log message corruption under load. As a side effect,
- the "no thread-safe PRNG" warning could be removed as well.
+- Bug fixes:
+ - Fixed a memory leak when rejecting client connections due to
+ the socket limit being reached (CID 66382). This affected
+ Privoxy 3.0.21 when compiled with IPv6 support (on most
+ platforms this is the default).
+ - Fixed an immediate-use-after-free bug (CID 66394) and two
+ additional unconfirmed use-after-free complaints made by
+ Coverity scan (CID 66391, CID 66376).
+ - Actually show the FORCE_PREFIX value on the show-status page
+ - Properly deal with Keep-Alive headers with timeout= parameters
+ If the timeout still can't be parsed, use the configured
+ timeout instead of preventing the client from keeping the
+ connection alive. Fixes #3615312/#870 reported by Bernard Guillot.
+ - Not using any filter files no longer results in warning messages
+ unless an action file is referencing header taggers or filters.
+ Reported by Stefan Kurtz in #3614835.
+ - Fixed a bug that prevented Privoxy from reusing some reusable
+ connections. Two bit masks with different purpose unintentionally
+ shared the same bit.
+ - A couple of additional bugs were discovered by Coverity Scan.
+ The fixes that are not expected to affect users are not explicitly
+ mentioned here, for details please have a look at the CVS logs.
+
+- General improvements:
+ -Introduced negative tag patterns NO-REQUEST-TAG and NO-RESPONSE-TAG.
+ They apply if no matching tag is found after parsing client or
+ server headers.
+ - Add support for external filters which allow to process the
+ response body with a script or program written in any language
+ the platform supports. External filters are enabled with
+ +external-filter{} after they have been defined in one of the
+ filter files with a header line starting with "EXTERNAL-FILTER:".
+ External filter support is experimental, not compiled by default
+ and known not to work on all platforms.
+ - Add support for the 'PATCH' method as defined in RFC5789.
+ - Reject requests with unsupported Expect header values.
+ Fixes a couple of Co-Advisor tests.
+ - Normalize the HTTP-version in forwarded requests and responses.
+ This is an explicit RFC 2616 MUST and RFC 7230 mandates that
+ intermediaries send their own HTTP-version in forwarded
+ messages.
+ - Client 'Keep-Alive' headers are no longer forwarded. From a user's
+ point of view it doesn't really matter, but RFC 2616 (obsolete)
+ mandates that the header is removed and this fixes a Co-Advisor
+ complaint.
+ - Change declared template file encoding to UTF-8. The templates
+ already used a subset of UTF-8 anyway and changing the declaration
+ allows to properly display UTF-8 characters used in the action files.
+ This change may require existing action files with ISO-8859-1
+ characters that aren't valid UTF-8 to be converted to UTF-8.
+ Requested by Sam Chen in #582.
+ - Do not pass rejected keep-alive timeouts to the server. It might
+ not have caused any problems (we know of), but doing the right
+ thing shouldn't hurt either.
+ - Let log_error() use its own buffer size #define to make changing
+ the log buffer size slightly less inconvenient.
+ - Turned single-threaded into a "proper" toggle directive with arguments.
+ - CGI templates no longer enforce new windows for some links.
+ - Remove an undocumented workaround ('HOST' header removal) for
+ an Apple iTunes bug that according to #729900 got fixed in 2003.
+
+- Action file improvements:
+ - The pattern 'promotions.' is no longer being blocked.
+ Reported by rakista in #3608540.
+ - Disable fast-redirects for .microsofttranslator.com/.
+ - Disable filter{banners-by-size} for .dgb-tagungszentren.de/.
+ - Add adn.speedtest.net as a site-specific unblocker.
+ Support request #3612908.
+ - Disable filter{banners-by-size} for creativecommons.org/.
+ - Block requests to data.gosquared.com/. Reported by cbug in #3613653.
+ - Unblock .conrad./newsletter/. Reported by David Bo in #3614238.
+ - Unblock .bundestag.de/.
+ - Unblock .rote-hilfe.de/.
+ - Disable fast-redirects for .facebook.com/plugins/like.php.
+ - Unblock Stackexchange popup URLs that aren't used to serve ads.
+ Reported by David Wagner in #3615179.
+ - Disable fast-redirects for creativecommons.org/.
+ - Unblock .stopwatchingus.info/.
+ - Block requests for .adcash.com/script/.
+ Reported by Tyrexionibus in #3615289.
+ - Disable HTML filters if the response was tagged as JavaScript.
+ Filtering JavaScript code with filters intended to deal with HTML
+ is usually a waste of time and, more importantly, may break stuff.
+ - Use a custom redirect{} for .washingtonpost.com/wp-apps/imrs\.php\?src=
+ Previously enabling the 'Advanced' settings (or manually enabling
+ +fast-redirects{}) prevented some images from being loaded properly.
+ - Unblock "adina*." Fixes #919 reported by Morton A. Goldberg.
+ - Block '/.*DigiAd'.
+ - Unblock 'adele*.'. Reported by Adele Lime in #1663.
+ - Disable banners-by-size for kggp.de/.
+
+- Filter file improvements & bug fixes:
+ - Decrease the chances that js-annoyances creates invalid JavaScript.
+ Submitted by John McGowan on ijbswa-users@.
+ - Let the msn filter hide 'related' ads again.
+ - Remove a stray '1' in the 'html-annoyances' filter.
+ - Prevent img-reorder from messing up img tags with empty src
+ attributes. Fixes #880 reported by Duncan.
+
+- Documentation improvements:
+ - Updated the 'Would you like to donate?' section.
+ - Note that invalid forward-override{} parameter syntax isn't
+ detected until the parameter is used.
+ - Add another +redirect{} example: a shortcut for illumos bugs.
+ - Make it more obvious that many operating systems support log
+ rotation out of the box.
+ - Fixed dead links. Reported by Mark Nelson in #3614557.
+ - Rephrased the 'Why is the configuration so complicated?' answer
+ to be slightly less condescending. Anonymously suggested in #3615122.
+ - Be more explicit about accept-intercepted-requests's lack of MITM support.
+ - Make 'demoronizer' FAQ entries more generic.
+ - Add an example hostname to the --pre-chroot-nslookup description.
+ - Add an example for a host pattern that matches an IP address.
+ - Rename the 'domain pattern' to 'host pattern' as it may
+ contain IP addresses as well.
+ - Recommend forward-socks5t when using Tor. It seems to work fine and
+ modifying the Tor configuration to profit from it hasn't been necessary
+ for a while now.
+ - Add another redirect{} example to stress that redirect loops can
+ and should be avoided.
+ - The usual spelling and grammar fixes. Parts of them were
+ reported by Reuben Thomas in #3615276.
+ - Mention the PCRS option letters T and D in the filter section.
+ - Clarify that handle-as-empty-doc-returns-ok is still useful
+ and will not be removed without replacement.
+ - Note that security issues shouldn't be reported using the bug tracker.
+ - Clarify what Privoxy does if both +block{} and +redirect{} apply.
+ - Removed the obsolete bookmarklets section.
+
+- Build system improvements
+ - Let --with-group properly deal with secondary groups.
+ Patch submitted by Anatoly Arzhnikov in #3615187.
+ - Fix web-actions target.
+ - Add a web-faq target that only updates the FAQ on the webserver.
+ - Remove already-commented-out non-portable DOSFILTER alternatives.
+ - Remove the obsolete targets dok-put and dok-get.
+ - Add a sf-shell target.
+
+*** Version 3.0.21 stable ***
+
+- Bug fixes:
+ - On POSIX-like platforms, network sockets with file descriptor
+ values above FD_SETSIZE are properly rejected. Previously they
+ could cause memory corruption in configurations that allowed
+ the limit to be reached.
+ - Proxy authentication headers are removed unless the new directive
+ enable-proxy-authentication-forwarding is used. Forwarding the
+ headers potentially allows malicious sites to trick the user
+ into providing them with login information.
+ Reported by Chris John Riley.
+ - Compiles on OS/2 again now that unistd.h is only included
+ on platforms that have it.
+
+- General improvements:
+ - The show-status page shows the FEATURE_STRPTIME_SANITY_CHECKS status.
+ - A couple of assert()s that could theoretically dereference
+ NULL pointers in debug builds have been relocated.
+ - Added an LSB info block to the generic start script.
+ Based on a patch from Natxo Asenjo.
+ - The max-client-connections default has been changed to 128
+ which should be more than enough for most setups.
+
+- Action file improvements:
+ - Block rover.ebay./ar.*\&adtype= instead of "/.*\&adtype=" which
+ caused too man false positives.
+ Reported by u302320 in #360284, additional feedback from Adam Piggott.
+ - Unblock '.advrider.com/' and '/.*ADVrider'.
+ Anonymously reported in #3603636.
+ - Stop blocking '/js/slider\.js'.
+ Reported by Adam Piggott in #3606635 and _lvm in #2791160.
+
+- Filter file improvements:
+ - Added an iframes filter.
+
+- Documentation improvements:
+ - The whole GPLv2 text is included in the user manual now,
+ so Privoxy can serve it itself and the user can read it
+ without having to wade through GPLv3 ads first.
+ - Properly numbered and underlined a couple of section titles
+ in the config that where previously overlooked due to a flaw
+ in the conversion script. Reported by Ralf Jungblut.
+ - Improved the support instruction to hopefully make it harder to
+ unintentionally provide insufficient information when requesting
+ support. Previously it wasn't obvious that the information we need
+ in bug reports is usually also required in support requests.
+ - Removed documentation about packages that haven't been provided
+ in years.
+
+- Privoxy-Regression-Test:
+ - Only log the test number when not running in verbose mode
+ The position of the test is rarely relevant and it previously
+ wasn't exactly obvious which one of the numbers was useful to
+ repeat the test with --test-number.
+
+- GNUmakefile improvements:
+ - Factor generate-config-file out of config-file to make testing
+ more convenient.
+ - The clean target now also takes care of patch leftovers.
+
+*** Version 3.0.20 beta ***
+
+- Bug fixes:
+ - Client sockets are now properly shutdown and drained before being
+ closed. This fixes page truncation issues with clients that aggressively
+ pipeline data on platforms that otherwise discard already written data.
+ The issue mainly affected Opera users and was initially reported
+ by Kevin in #3464439, szotsaki provided additional information to track
+ down the cause.
+ - Fix latency calculation for shared connections (disabled by default).
+ It was broken since their introduction in 2009. The calculated latency
+ for most connections would be 0 in which case the timeout detection
+ failed to account for the real latency.
+ - Reject URLs with invalid port. Previously they were parsed incorrectly and
+ characters between the port number and the first slash were silently
+ dropped as shown by curl test 187.
+ - The default-server-timeout and socket-timeout directives accept 0 as
+ valid value.
+ - Fix a race condition on Windows that could cause Privoxy to become
+ unresponsive after toggling it on or off through the taskbar icon.
+ Reported by Tim H. in #3525694.
+ - Fix the compilation on Windows when configured without IPv6 support.
+ - Fix an assertion that could cause debug builds to abort() in case of
+ socks5 connection failures with "debug 2" enabled.
+ - Fix an assertion that could cause debug builds to abort() if a filter
+ contained nul bytes in the replacement text.
+
+- General improvements:
+ - Significantly improved keep-alive support for both client and server
+ connections.
+ - New debug log level 65536 which logs all actions that were applied to
+ the request.
+ - New directive client-header-order to forward client headers in a
+ different order than the one in which they arrived.
+ - New directive tolerate-pipelining to allow client-side pipelining.
+ If enabled (3.0.20 beta enables it by default), Privoxy will keep
+ pipelined client requests around to deal with them once the current
+ request has been served.
+ - New --config-test option to let Privoxy exit after checking whether or not
+ the configuration seems valid. The limitations noted in TODO #22 and #23
+ still apply. Based on a patch by Ramkumar Chinchani.
+ - New limit-cookie-lifetime{} action to let cookies expire before the end
+ of the session. Suggested by Rick Sykes in #1049575.
+ - Increase the hard-coded maximum number of actions and filter files from
+ 10 to 30 (each). It doesn't significantly affect Privoxy's memory usage
+ and recompiling wasn't an option for all Privoxy users that reached the
+ limit.
+ - Add support for chunk-encoded client request bodies. Previously
+ chunk-encoded request bodies weren't guaranteed to be forwarded correctly,
+ so this can also be considered a bug fix although chunk-encoded request
+ bodies aren't commonly used in the real world.
+ - Add support for Tor's optimistic-data SOCKS extension, which can reduce the
+ latency for requests on newly created connections. Currently only the
+ headers are sent optimistically and only if the client request has already
+ been read completely which rules out requests with large bodies.
+ - After preventing the client from pipelining, don't signal keep-alive
+ intentions. When looking at the response headers alone, it previously
+ wasn't obvious from the client's perspective that no additional responses
+ should be expected.
+ - Stop considering client sockets tainted after receiving a request with body.
+ It hasn't been necessary for a while now and unnecessarily causes test
+ failures when using curl's test suite.
+ - Allow HTTP/1.0 clients to signal interest in keep-alive through the
+ Proxy-Connection header. While such client are rare in the real world, it
+ doesn't hurt and couple of curl tests rely on it.
+ - Only remove duplicated Content-Type headers when filters are enabled.
+ If they are not it doesn't cause ill effects and the user might not want it.
+ Downgrade the removal message to LOG_LEVEL_HEADER to clarify that it's not
+ an error in Privoxy and is unlikely to cause any problems in general.
+ Anonymously reported in #3599335.
+ - Set the socket option SO_LINGER for the client socket.
+ - Move several variable declarations to the beginning of their code block.
+ It's required when compiling with gcc 2.95 which is still used on some
+ platforms. Initial patch submitted by Simon South in #3564815.
+ - Optionally try to sanity-check strptime() results before trusting them.
+ Broken strptime() implementations have caused problems in the past and
+ the most recent offender seems to be FreeBSD's libc (standards/173421).
+ - When filtering is enabled, let Range headers pass if the range starts at
+ the beginning. This should work around (or at least reduce) the video
+ playback issues with various Apple clients as reported by Duc in #3426305.
+ - Do not confuse a client hanging up with a connection time out. If a client
+ closes its side of the connection without sending a request line, do not
+ send the CLIENT_CONNECTION_TIMEOUT_RESPONSE, but report the condition
+ properly.
+ - Allow closing curly braces as part of action values as long as they are
+ escaped.
+ - On Windows, the logfile is now written before showing the GUI error
+ message which blocks until the user acknowledges it.
+ Reported by Adriaan in #3593603.
+ - Remove an unreasonable parameter limit in the CGI interface. The new
+ parameter limit depends on the memory available and is currently unlikely
+ to be reachable, due to other limits in both Privoxy and common clients.
+ Reported by Andrew on ijbswa-users@.
+ - Decrease the chances of parse failures after requests with unsupported
+ methods were sent to the CGI interface.
+
+- Action file improvements:
+ - Remove the comment that indicated that updated default.action versions
+ are released on their own.
+ - Block 'optimize.indieclick.com/' and 'optimized-by.rubiconproject.com/'
+ - Unblock 'adjamblog.wordpress.com/' and 'adjamblog.files.wordpress.com/'.
+ Reported by Ryan Farmer in #3496116.
+ - Unblock '/.*Bugtracker'. Reported by pwhk in #3522341.
+ - Add test URLs for '.freebsd.org' and '.watson.org'.
+ - Unblock '.urbandictionary.com/popular'.
+ - Block '.adnxs.com/'.
+ - Block 'farm.plista.com/widgetdata.php'.
+ - Block 'rotation.linuxnewmedia.com/'.
+ - Block 'reklamy.sfd.pl/'. Reported by kacperdominik in #3399948.
+ - Block 'g.adspeed.net/'.
+ - Unblock 'websupport.wdc.com/'. Reported by Adam Piggot in #3577851.
+ - Block '/openx/www/delivery/'.
+ - Disable fast-redirects for '.googleapis.com/'.
+ - Block 'imp.double.net/'. Reported by David Bo in #3070411.
+ - Block 'gm-link.com/' which is used for email tracking.
+ Reported by David Bo in #1812733.
+ - Verify that requests to "bwp." are blocked. URL taken from #1736879
+ submitted by Francois Marier.
+ - Block '/.*bannerid='. Reported by Adam Piggott in #2975779.
+ - Block 'cltomedia.info/delivery/' and '.adexprt.com/'.
+ Anonymously reported in #2965254.
+ - Block 'de17a.com/'. Reported by David Bo in #3061472.
+ - Block 'oskar.tradera.com/'. Reported by David Bo in #3060596.
+ - Block '/scripts/webtrends\.js'. Reported by johnd16 in #3002729.
+ - Block requests for 'pool.*.adhese.com/'. Reported by johnd16 in #3002716.
+ - Update path pattern for Coremetrics and add tests.
+ Pattern and URLs submitted by Adam Piggott #3168443.
+ - Enable +fast-redirects{check-decoded-url} for 'tr.anp.se/'.
+ Reported by David Bo in #3268832.
+ - Unblock '.conrad.se/newsletter/banners/'. Reported by David Bo in #3413824.
+ - Block '.tynt.com/'. Reported by Dan Stahlke in #3421767.
+ - Unblock '.bbci.co.uk/radio/'. Reported by Adam Piggott in #3569603.
+ - Block requests to 'service.maxymiser.net/'.
+ Reported by johnd16 in #3118401 (with a previous URL).
+ - Disable fast-redirects for Google's "let's pretend your computer is
+ infected" page.
+ - Unblock '/.*download' to resolve actionsfile feedback #3498129.
+ Submitted by Steven Kolins (soundcloud.com not working).
+ - Unblock '.wlxrs.com/' which is required by hotmail.com.
+ Fixes #3413827 submitted by David Bo.
+ - Add two unblock patterns for popup radio and TV players.
+ Submitted by Adam Piggott in #3596089.
+
+- Filter file improvements & bug fixes:
+ - Add a referer tagger.
+ - Reduce the likelihood that the google filter messes up HTML-generating
+ JavaScript. Reported by Zeno Kugy in #3520260.
+
+- Documentation improvements:
+ - Revised all OS X sections due to new packaging module (OSXPackageBuilder).
+ - Update the list of supported operating systems to clarify that all Windows
+ versions after 95 are expected to work and note that the platform-specific
+ code for AmigaOS and QNX currently isn't maintained.
+ - Update 'Signals' section, the only explicitly handled signals are SIGINT,
+ SIGTERM and SIGHUP.
+ - Add Haiku to the list of operating systems on which Privoxy is known to
+ run.
+ - Add DragonFly to the list of BSDs on which Privoxy is known to run.
+ - Removed references to redhat-specific documentation set since it no longer
+ exists.
+ - Removed references to building PDFs since we no longer do so.
+ - Multiple listen-address directives are supported since 3.0.18, correct the
+ documentation to say so.
+ - Remove bogus section about long and short being preferable to int.
+ - Corrected some Internet JunkBuster references to Privoxy.
+ - Removed references to www.junkbusters.com since it is no longer
+ maintained. Reported by Angelina Matson.
+ - Various grammar and spelling corrections
+ - Add a client-header-tagger{} example for disabling filtering for range
+ requests.
+ - Correct a URL in the "Privoxy with Tor" FAQ.
+ - Spell 'refresh-tags' correctly. Reported by Don in #3571927.
+ - Sort manpage options alphabetically.
+ - Remove an incorrect sentence in the toggle section. The toggle state
+ doesn't affect whether or not the Windows version uses the tray icon.
+ Reported by Zeno Kugy in #3596395.
+ - Add new contributors since 3.0.19.
+
+- Log message improvements:
+ - When stopping to watch a client socket due to pipelining, additionally log
+ the socket number.
+ - Log the client socket and its condition before closing it. This makes it
+ more obvious that the socket actually gets closed and should help when
+ diagnosing problems like #3464439.
+ - In case of SOCKS5 failures, do not explicitly log the server's response.
+ It hasn't helped so far and the response can already be logged by enabling
+ "debug 32768" anyway. This reverts v1.81 and the follow-up bug fix v1.84.
+ - Relocate the connection-accepted message from listen_loop() to serve().
+ This way it's printed by the thread that is actually serving the
+ connection which is nice when grepping for thread ids in log files.
+
+- Code cleanups:
+ - Remove compatibility layer for versions prior to 3.0 since it has been
+ obsolete for more than 10 years now.
+ - Remove the ijb_isupper() and ijb_tolower() macros from parsers.c since
+ they aren't used in this file.
+ - Removed the 'Functions declared include:' comment sections since they tend
+ to be incomplete, incorrect and out of date and the benefit seems
+ questionable.
+ - Various comment grammar and comprehensibility improvements.
+ - Remove a pointless fflush() call in chat(). Flushing all streams pretty
+ much all the time for no obvious reason is ridiculous.
+ - Relocate ijb_isupper()'s definition to project.h and get the ijb_tolower()
+ definition from there, too.
+ - Relocate ijb_isdigit()'s definition to project.h.
+ - Rename ijb_foo macros to privoxy_foo.
+ - Add malloc_or_die() which will allow to simplify code paths where malloc()
+ failures don't need to be handled gracefully.
+ - Add strdup_or_die() which will allow to simplify code paths where strdup()
+ failures don't need to be handled gracefully.
+ - Replace strdup() calls with strdup_or_die() calls where it's safe and
+ simplifies the code.
+ - Fix white-space around parentheses.
+ - Add missing white-space behind if's and the following parentheses.
+ - Unwrap a memcpy() call in resolve_hostname_to_ip().
+ - Declare pcrs_get_delimiter()'s delimiters[] static const.
+ - Various optimisations to remove dead code and merge inefficient code
+ structures for improved clarity, performance or code compactness.
+ - Various data type corrections.
+ - Change visibility of several code segments when compiling without
+ FEATURE_CONNECTION_KEEP_ALIVE enabled for clarity.
+ - In pcrs_get_delimiter(), do not use delimiters outside the ASCII range.
+ Fixes a clang complaint.
+ - Fix an error message in get_last_url() nobody is supposed to see.
+ Reported by Matthew Fischer in #3507301.
+ - Fix a typo in the no-zlib-support complaint. Patch submitted by Matthew
+ Fischer in #3507304.
+ - Shorten ssplit()'s prototype by removing the last two arguments. We always
+ want to skip empty fields and ignore leading delimiters, so having
+ parameters for this only complicates the API.
+ - Use an enum for the type of the action value.
+ - Rename action_name's member takes_value to value_type as it isn't used as
+ boolean.
+ - Turn family mismatches in match_sockaddr() into fatal errors.
+ - Let enlist_unique_header() verify that the caller didn't pass a header
+ containing either \r or \n.
+ - Change the hashes used in load_config() to unsigned int. That's what
+ hash_string() actually returns and using a potentially larger type
+ is at best useless.
+ - Use privoxy_tolower() instead of vanilla tolower() with manual casting of
+ the argument.
+ - Catch ssplit() failures in parse_cgi_parameters().
+
+- Privoxy-Regression-Test:
+ - Add an 'Overwrite condition' directive to skip any matching tests before
+ it. As it has a global scope, using it is more convenient than clowning
+ around with the Ignore directive.
+ - Log to STDOUT instead of STDERR.
+ - Include the Privoxy version in the output.
+ - Various grammar and spelling corrections in documentation and code.
+ - Additional tests for range requests with filtering enabled.
+ - Tests with mostly invalid range request.
+ - Add a couple of hide-if-modified-since{} tests with different date formats.
+ - Cleaned up the format of the regression-tests.action file to match the
+ format of default.action.
+ - Remove the "Copyright" line from print_version(). When using --help, every
+ line of screen space matters and thus shouldn't be wasted on things the
+ user doesn't care about.
+
+- Privoxy-Log-Parser:
+ - Improve the --statistics performance by skipping sanity checks for input
+ that shouldn't affect the results anyway. Add a --strict-checks option
+ that enables some of the checks again, just in case anybody cares.
+ - The distribution of client requests per connection is included in
+ the --statistic output.
+ - The --accept-unknown-messages option has been removed and the behavior
+ is now the default.
+ - Accept and (mostly) highlight new log messages introduced with
+ Privoxy 3.0.20.
+
+- uagen:
+ - Bump generated Firefox version to 17.
+
+- GNUmakefile improvements:
+ - The dok-tidy target no longer taints documents with a tidy-mark
+ - Change RA_MODE from 0664 to 0644. Suggested by Markus Dittrich in
+ #3505445.
+ - Remove tidy's clean flag as it changes the scope of attributes.
+ Link-specific colors end up being applied to all text. Reported by Adam
+ Piggott in #3569551.
+ - Leave it up to the user whether or not smart tags are inserted.
+ - Let w3m itself do the line wrapping for the config file. It works better
+ than fmt as it can honour pre tags causing less unintentional line breaks.
+ - Ditch a pointless '-r' passed to rm to delete files.
+ - The config-file target now requires less manual intervention and updates
+ the original config.
+ - Change WDUMP to generate ASCII. Add WDUMP_UTF8 to allow UTF-8 in the
+ AUTHORS file so the names are right.
+ - Stop pretending that lynx and links are supported for the documentation.
+
+- configure improvements:
+ - On Haiku, do not pass -lpthread to the compiler. Haiku's pthreads
+ implementation is contained in its system library, libroot, so no
+ additional library needs to be searched.
+ Patch submitted by Simon South in #3564815.
+ - Additional Haiku-specific improvements. Disable checks intended for
+ multi-user systems as Haiku is presently single-user. Group Haiku-specific
+ settings in their own section, following the pattern for Solaris, OS/2 and
+ AmigaOS. Add additional library-related settings to remove the need for
+ providing configure with custom LDFLAGS.
+ Submitted by Simon South in #3574538.
+
+*** Version 3.0.19 Stable ***
+
+- Bug fixes:
+ - Prevent a segmentation fault when de-chunking buffered content.
+ It could be triggered by malicious web servers if Privoxy was
+ configured to filter the content and running on a platform
+ where SIZE_T_MAX isn't larger than UINT_MAX, which probably
+ includes most 32-bit systems. On those platforms, all Privoxy
+ versions before 3.0.19 appear to be affected.
+ To be on the safe side, this bug should be presumed to allow
+ code execution as proving that it doesn't seems unrealistic.
+ - Do not expect a response from the SOCKS4/4A server until it
+ got something to respond to. This regression was introduced
+ in 3.0.18 and prevented the SOCKS4/4A negotiation from working.
+ Reported by qqqqqw in #3459781.
+
+- General improvements:
+ - Fix an off-by-one in an error message about connect failures.
+ - Use a GNUMakefile variable for the webserver root directory and
+ update the path. Sourceforge changed it which broke various
+ web-related targets.
+ - Update the CODE_STATUS description.
+
+*** Version 3.0.18 Stable ***
+
+- Bug fixes:
+ - If a generated redirect URL contains characters RFC 3986 doesn't
+ permit, they are (re)encoded. Not doing this makes Privoxy versions
+ from 3.0.5 to 3.0.17 susceptible to HTTP response splitting (CWE-113)
+ attacks if the +fast-redirects{check-decoded-url} action is used.
+ - Fix a logic bug that could cause Privoxy to reuse a server
+ socket after it got tainted by a server-header-tagger-induced
+ block that was triggered before the whole server response had
+ been read. If keep-alive was enabled and the request following
+ the blocked one was to the same host and using the same forwarding
+ settings, Privoxy would send it on the tainted server socket.
+ While the server would simply treat it as a pipelined request,
+ Privoxy would later on fail to properly parse the server's
+ response as it would try to parse the unread data from the
+ first response as server headers for the second one.
+ Regression introduced in 3.0.17.
+ - When implying keep-alive in client_connection(), remember that
+ the client didn't. Fixes a regression introduced in 3.0.13 that
+ would cause Privoxy to wait for additional client requests after
+ receiving a HTTP/1.1 request with "Connection: close" set
+ and connection sharing enabled.
+ With clients which terminates the client connection after detecting
+ that the whole body has been received it doesn't really matter,
+ but with clients that don't the connection would be kept open until
+ it timed out.
+ - Fix a subtle race condition between prepare_csp_for_next_request()
+ and sweep(). A thread preparing itself for the next client request
+ could briefly appear to be inactive.
+ If all other threads were already using more recent files,
+ the thread could get its files swept away under its feet.
+ So far this has only been reproduced while stress testing in
+ valgrind while touching action files in a loop. It's unlikely
+ to have caused any actual problems in the real world.
+ - Disable filters if SDCH compression is used unless filtering is forced.
+ If SDCH was combined with a supported compression algorithm, Privoxy
+ previously could try to decompress it and ditch the Content-Encoding
+ header even though the SDCH compression wasn't dealt with.
+ Reported by zebul666 in #3225863.
+ - Make a copy of the --user value and only mess with that when splitting
+ user and group. On some operating systems modifying the value directly
+ is reflected in the output of ps and friends and can be misleading.
+ Reported by zepard in #3292710.
+ - If forwarded-connect-retries is set, only retry if Privoxy is actually
+ forwarding the request. Previously direct connections would be retried
+ as well.
+ - Fixed a small memory leak when retrying connections with IPv6
+ support enabled.
+ - Remove an incorrect assertion in compile_dynamic_pcrs_job_list()
+ It could be triggered by a pcrs job with an invalid pcre
+ pattern (for example one that contains a lone quantifier).
+ - If the --user argument user[.group] contains a dot, always bail out
+ if no group has been specified. Previously the intended, but undocumented
+ (and apparently untested), behaviour was to try interpreting the whole
+ argument as user name, but the detection was flawed and checked for '0'
+ instead of '\0', thus merely preventing group names beginning with a zero.
+ - In html_code_map[], use a numeric character reference instead of '
+ which wasn't standardized before XHTML 1.0.
+ - Fix an invalid free when compiled with FEATURE_GRACEFUL_TERMINATION
+ and shut down through http://config.privoxy.org/die
+ - In get_actions(), fix the "temporary" backwards compatibility hack
+ to accept block actions without reason.
+ It also covered other actions that should be rejected as invalid.
+ Reported by Billy Crook.
+
+- General improvements:
+ - Privoxy can (re)compress buffered content before delivering
+ it to the client. Disabled by default as most users wouldn't
+ benefit from it.
+ - The +fast-redirects{check-decoded-url} action checks URL
+ segments separately. If there are other parameters behind
+ the redirect URL, this makes it unnecessary to cut them off
+ by additionally using a +redirect{} pcrs command.
+ Initial patch submitted by Jamie Zawinski in #3429848.
+ - When loading action sections, verify that the referenced filters
+ exist. Currently missing filters only result in an error message,
+ but eventually the severity will be upgraded to fatal.
+ - Allow to bind to multiple separate addresses.
+ Patch set submitted by Petr Pisar in #3354485.
+ - Set socket_error to errno if connecting fails in rfc2553_connect_to().
+ Previously rejected direct connections could be incorrectly reported
+ as DNS issues if Privoxy was compiled with IPv6 support.
+ - Adjust url_code_map[] so spaces are replaced with %20 instead of '+'
+ While '+' can be used by client's submitting form data, this is not
+ actually what Privoxy is using the lookups for. This is more of a
+ cosmetic issue and doesn't fix any known problems.
+ - When compiled without FEATURE_FAST_REDIRECTS, do not silently
+ ignore +fast-redirect{} directives
+ - Added a workaround for GNU libc's strptime() reporting negative
+ year values when the parsed year is only specified with two digits.
+ On affected systems cookies with such a date would not be turned
+ into session cookies by the +session-cookies-only action.
+ Reported by Vaeinoe in #3403560
+ - Fixed bind failures with certain GNU libc versions if no non-loopback
+ IP address has been configured on the system. This is mainly an issue
+ if the system is using DHCP and Privoxy is started before the network
+ is completely configured.
+ Reported by Raphael Marichez in #3349356.
+ Additional insight from Petr Pisar.
+ - Privoxy log messages now use the ISO 8601 date format %Y-%m-%d.
+ It's only slightly longer than the old format, but contains
+ the full date including the year and allows sorting by date
+ (when grepping in multiple log files) without hassle.
+ - In get_last_url(), do not bother trying to decode URLs that do
+ not contain at least one '%' sign. It reduces the log noise and
+ a number of unnecessary memory allocations.
+ - In case of SOCKS5 failures, dump the socks response in the log message.
+ - Simplify the signal setup in main().
+ - Streamline socks5_connect() slightly.
+ - In socks5_connect(), require a complete socks response from the server.
+ Previously Privoxy didn't care how much data the server response
+ contained as long as the first two bytes contained the expected
+ values. While at it, shrink the buffer size so Privoxy can't read
+ more than a whole socks response.
+ - In chat(), do not bother to generate a client request in case of
+ direct CONNECT requests. It will not be used anyway.
+ - Reduce server_last_modified()'s stack size.
+ - Shorten get_http_time() by using strftime().
+ - Constify the known_http_methods pointers in unknown_method().
+ - Constify the time_formats pointers in parse_header_time().
+ - Constify the formerly_valid_actions pointers in action_used_to_be_valid().
+ - Introduce a GNUMakefile MAN_PAGE variable that defaults to privoxy.1.
+ The Debian package uses section 8 for the man page and this
+ should simplify the patch.
+ - Deduplicate the INADDR_NONE definition for Solaris by moving it to jbsockets.h
+ - In block_url(), ditch the obsolete workaround for ancient Netscape versions
+ that supposedly couldn't properly deal with status code 403.
+ - Remove a useless NULL pointer check in load_trustfile().
+ - Remove two useless NULL pointer checks in load_one_re_filterfile().
+ - Change url_code_map[] from an array of pointers to an array of arrays
+ It removes an unnecessary layer of indirection and on 64bit system reduces
+ the size of the binary a bit.
+ - Fix various typos. Fixes taken from Debian's 29_typos.dpatch by Roland Rosenfeld.
+ - Add a dok-tidy GNUMakefile target to clean up the messy HTML
+ generated by the other dok targets.
+ - GNUisms in the GNUMakefile have been removed.
+ - Change the HTTP version in static responses to 1.1
+ - Synced config.sub and config.guess with upstream
+ 2011-11-11/386c7218162c145f5f9e1ff7f558a3fbb66c37c5.
+ - Add a dedicated function to parse the values of toggles. Reduces duplicated
+ code in load_config() and provides better error handling. Invalid or missing
+ toggle values are now a fatal error instead of being silently ignored.
+ - Terminate HTML lines in static error messages with \n instead of \r\n.
+ - Simplify cgi_error_unknown() a bit.
+ - In LogPutString(), don't bother looking at pszText when not
+ actually logging anything.
+ - Change ssplit()'s fourth parameter from int to size_t.
+ Fixes a clang complaint.
+ - Add a warning that the statistics currently can't be trusted.
+ Mention Privoxy-Log-Parser's --statistics option as
+ an alternative for the time being.
+ - In rfc2553_connect_to(), start setting cgi->error_message on error.
+ - Change the expected status code returned for http://p.p/die depending
+ on whether or not FEATURE_GRACEFUL_TERMINATION is available.
+ - In cgi_die(), mark the client connection for closing.
+ If the client will fetch the style sheet through another connection
+ it gets the main thread out of the accept() state and should thus
+ trigger the actual shutdown.
+ - Add a proper CGI message for cgi_die().
+ - Don't enforce a logical line length limit in read_config_line().
+ - Slightly refactor server_last_modified() to remove useless gmtime*() calls.
+ - In get_content_type(), also recognize '.jpeg' as JPEG extension.
+ - Add '.png' to the list of recognized file extensions in get_content_type().
+ - In block_url(), consistently use the block reason "Request blocked by Privoxy"
+ In two places the reason was "Request for blocked URL" which hides the
+ fact that the request got blocked by Privoxy and isn't necessarily
+ correct as the block may be due to tags.
+ - In listen_loop(), reload the configuration files after accepting
+ a new connection instead of before.
+ Previously the first connection that arrived after a configuration
+ change would still be handled with the old configuration.
+ - In chat()'s receive-data loop, skip a client socket check if
+ the socket will be written to right away anyway. This can
+ increase the transfer speed for unfiltered content on fast
+ network connections.
+ - The socket timeout is used for SOCKS negotiations as well which
+ previously couldn't timeout.
+ - Don't keep the client connection alive if any configuration file
+ changed since the time the connection came in. This is closer to
+ Privoxy's behaviour before keep-alive support for client connection
+ has been added and also less confusing in general.
+ - Treat all Content-Type header values containing the pattern
+ 'script' as a sign of text. Reported by pribog in #3134970.
+
+- Action file improvements:
+ - Moved the site-specific block pattern section below the one for the
+ generic patterns so for requests that are matched in both, the block
+ reason for the domain is shown which is usually more useful than showing
+ the one for the generic pattern.
+ - Remove -prevent-compression from the fragile alias. It's no longer
+ used anywhere by default and isn't known to break stuff anyway.
+ - Add a (disabled) section to block various Facebook tracking URLs.
+ Reported by Dan Stahlke in #3421764.
+ - Add a (disabled) section to rewrite and redirect click-tracking
+ URLs used on news.google.com.
+ Reported by Dan Stahlke in #3421755.
+ - Unblock linuxcounter.net/.
+ Reported by Dan Stahlke in #3422612.
+ - Block 'www91.intel.com/' which is used by Omniture.
+ Reported by Adam Piggott in #3167370.
+ - Disable the handle-as-empty-doc-returns-ok option and mark it as deprecated.
+ Reminded by tceverling in #2790091.
+ - Add ".ivwbox.de/" to the "Cross-site user tracking" section.
+ Reported by Nettozahler in #3172525.
+ - Unblock and fast-redirect ".awin1.com/.*=http://".
+ Reported by Adam Piggott in #3170921.
+ - Block "b.collective-media.net/".
+ - Widen the Debian popcon exception to "qa.debian.org/popcon".
+ Seen in Debian's 05_default_action.dpatch by Roland Rosenfeld.
+ - Block ".gemius.pl/" which only seems to be used for user tracking.
+ Reported by johnd16 in #3002731. Additional input from Lee and movax.
+ - Disable banners-by-size filters for '.thinkgeek.com/'.
+ The filter only seems to catch pictures of the inventory.
+ - Block requests for 'go.idmnet.bbelements.com/please/showit/'.
+ Reported by kacperdominik in #3372959.
+ - Unblock adainitiative.org/.
+ - Add a fast-redirects exception for '.googleusercontent.com/.*=cache'.
+ - Add a fast-redirects exception for webcache.googleusercontent.com/.
+ - Unblock http://adassier.wordpress.com/ and http://adassier.files.wordpress.com/.
+
+- Filter file improvements:
+ - Let the yahoo filter hide '.ads'.
+ - Let the msn filter hide overlay ads for Facebook 'likes' in search
+ results and elements with the id 's_notf_div'. They only seem to be
+ used to advertise site 'enhancements'.
+ - Let the js-events filter additionally disarm setInterval().
+ Suggested by dg1727 in #3423775.
+
+- Documentation improvements:
+ - Clarify the effect of compiling Privoxy with zlib support.
+ Suggested by dg1727 in #3423782.
+ - Point out that the SourceForge messaging system works like a black
+ hole and should thus not be used to contact individual developers.
+ - Mention some of the problems one can experience when not explicitly
+ configuring an IP addresses as listen address.
+ - Explicitly mention that hostnames can be used instead of IP addresses
+ for the listen-address, that only the first address returned will be
+ used and what happens if the address is invalid.
+ Requested by Calestyo in #3302213.
+
+- Log message improvements:
+ - If only the server connection is kept alive, do not pretend to
+ wait for a new client request.
+ - Remove a superfluous log message in forget_connection().
+ - In chat(), properly report missing server responses as such
+ instead of calling them empty.
+ - In forwarded_connect(), fix a log message nobody should ever see.
+ - Fix a log message in socks5_connect(), a failed write operation
+ was logged as failed read operation.
+ - Let load_one_actions_file() properly complain about a missing
+ '{' at the beginning of the file.
+ Simply stating that a line is invalid isn't particularly helpful.
+ - Do not claim to listen on a socket until Privoxy actually does.
+ Patch submitted by Petr Pisar #3354485
+ - Prevent a duplicated LOG_LEVEL_CLF message when sending out
+ the "no-server-data" response.
+ - Also log the client socket when dropping a connection.
+ - Include the destination host in the 'Request ... marked for
+ blocking. limit-connect{...} doesn't allow CONNECT ...' message
+ Patch submitted by Saperski in #3296250.
+ - Prevent a duplicated log message if none of the resolved IP
+ addresses were reachable.
+ - In connect_to(), do not pretend to retry if forwarded-connect-retries
+ is zero or unset.
+ - When a specified user or group can't be found, put the name in
+ single-quotes when logging it.
+ - In rfc2553_connect_to(), explain getnameinfo() errors better.
+ - Remove a useless log message in chat().
+ - When retrying to connect, also log the maximum number of connection
+ attempts.
+ - Rephrase a log message in compile_dynamic_pcrs_job_list().
+ Divide the error code and its meaning with a colon. Call the pcrs
+ job dynamic and not the filter. Filters may contain dynamic and
+ non-dynamic pcrs jobs at the same time. Only mention the name of
+ the filter or tagger, but don't claim it's a filter when it could
+ be a tagger.
+ - In a fatal error message in load_one_actions_file(), cover both
+ URL and TAG patterns.
+ - In pcrs_strerror(), properly report unknown positive error code
+ values as such. Previously they were handled like 0 (no error).
+ - In compile_dynamic_pcrs_job_list(), also log the actual error code as
+ pcrs_strerror() doesn't handle all errors reported by pcre.
+ - Don't bother trying to continue chatting if the client didn't ask for it.
+ Reduces log noise a bit.
+ - Make two fatal error message in load_one_actions_file() more descriptive.
+ - In cgi_send_user_manual(), log when rejecting a file name due to '/' or '..'.
+ - In load_file(), log a message if opening a file failed.
+ The CGI error message alone isn't too helpful.
+ - In connection_destination_matches(), improve two log messages
+ to help understand why the destinations don't match.
+ - Rephrase a log message in serve(). Client request arrival
+ should be differentiated from closed client connections now.
+ - In serve(), log if a client connection isn't reused due to a
+ configuration file change.
+ - Let mark_server_socket_tainted() always mark the server socket tainted,
+ just don't talk about it in cases where it has no effect. It doesn't change
+ Privoxy's behaviour, but makes understanding the log file easier.
+
+- configure:
+ - Added a --disable-ipv6-support switch for platforms where support
+ is detected but doesn't actually work.
+ - Do not check for the existence of strerror() and memmove() twice
+ - Remove a useless test for setpgrp(2). Privoxy doesn't need it and
+ it can cause problems when cross-compiling.
+ - Rename the --disable-acl-files switch to --disable-acl-support.
+ Since about 2001, ACL directives are specified in the standard
+ config file.
+ - Update the URL of the 'Removing outdated PCRE version after the
+ next stable release' posting. The old URL stopped working after
+ one of SF's recent site "optimizations". Reported by Han Liu.
+
+- Privoxy-Regression-Test:
+ - Added --shuffle-tests option to increase the chances of detection race conditions.
+ - Added a --local-test-file option that allows to use Privoxy-Regression-Test without Privoxy.
+ - Added tests for missing socks4 and socks4a forwarders.
+ - The --privoxy-address option now works with IPv6 addresses containing brackets, too.
+ - Perform limited sanity checks for parameters that are supposed to have numerical values.
+ - Added a --sleep-time option to specify a number of seconds to
+ sleep between tests, defaults to 0.
+ - Disable the range-requests tagger for tests that break if it's enabled.
+ - Log messages use the ISO 8601 date format %Y-%m-%d.
+ - Fix spelling in two error messages.
+ - In the --help output, include a list of supported tests and their default levels.
+ - Adjust the tests to properly deal with FEATURE_TOGGLE being disabled.
+
+- Privoxy-Log-Parser:
+ - Perform limited sanity checks for command line parameters that
+ are supposed to have numerical values.
+ - Implement a --unbreak-lines-only option to try to revert MUA breakage.
+ - Accept and highlight: Added header: Content-Encoding: deflate
+ - Accept and highlight: Compressed content from 29258 to 8630 bytes.
+ - Accept and highlight: Client request arrived in time on socket 21.
+ - Highlight: Didn't receive data in time: a.fsdn.com:443
+ - Accept log messages with ISO 8601 time stamps, too.
+
+- uagen:
+ - Bump generated Firefox version to 8.0.
+ - Only randomize the release date if the new --randomize-release-date
+ option is enabled. Firefox versions after 4 use a fixed date string
+ without meaning.
+
+*** Version 3.0.17 Stable ***
+
+- Fixed last-chunk-detection for responses where the body was small
+ enough to be read with the headers, causing Privoxy to wait for the
+ end of the content until the server closed the connection or the
+ request timed out. Reported by "Karsten" in #3028326.
+- Responses with status code 204 weren't properly detected as body-less
+ like RFC2616 mandates. Like the previous bug, this caused Privoxy to
+ wait for the end of the content until the server closed the connection
+ or the request timed out. Fixes #3022042 and #3025553, reported by a
+ user with no visible name. Most likely also fixes a bunch of other
+ AJAX-related problem reports that got closed in the past due to
+ insufficient information and lack of feedback.
+- Fixed an ACL bug that made it impossible to build a blacklist.
+ Usually the ACL directives are used in a whitelist, which worked
+ as expected, but blacklisting is still useful for public proxies
+ where one only needs to deny known abusers access.
+- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
+ network. This should make debugging various parsing issues a lot easier.
+- The IPv6 code is enabled by default on Windows versions that support it.
+ Patch submitted by oCameLo in #2942729.
+- In mingw32 versions, the user.filter file is reachable through the
+ GUI, just like default.filter is. Feature request 3040263.
+- Added the configure option --enable-large-file-support to set a few
+ defines that are required by platforms like GNU/Linux to support files
+ larger then 2GB. Mainly interesting for users without proper logfile
+ management.
+- Logging with "debug 16" no longer stops at the first nul byte which is
+ pretty useless. Non-printable characters are replaced with their hex value
+ so the result can't span multiple lines making parsing them harder then
+ necessary.
+- Privoxy logs when reading an action, filter or trust file.
+- Fixed incorrect regression test markup which caused a test in
+ 3.0.16 to fail while Privoxy itself was working correctly.
+ While Privoxy accepts hide-referer, too, the action name is actually
+ hide-referrer which is also the name used one the final results page,
+ where the test expected the alias.
+
+- CGI interface improvements:
+ - In finish_http_response(), continue to add the 'Connection: close'
+ header if the client connection will not be kept alive.
+ Anonymously pointed out in #2987454.
+ - Apostrophes in block messages no longer cause parse errors
+ when the blocked page is viewed with JavaScript enabled.
+ Reported by dg1727 in #3062296.
+ - Fix a bunch of anchors that used underscores instead of dashes.
+ - Allow to keep the client connection alive after crunching the previous request.
+ Already opened server connections can be kept alive, too.
+ - In cgi_show_url_info(), don't forget to prefix URLs that only contain
+ http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
+ - Show the 404 CGI page if cgi_send_user_manual() is called while
+ local user manual delivery is disabled.
+
+- Action file improvements:
+ - Enable user.filter by default. Suggested by David White in #3001830.
+ - Block .sitestat.com/. Reported by johnd16 in #3002725.
+ - Block .atemda.com/. Reported by johnd16 in #3002723.
+ - Block js.adlink.net/. Reported by johnd16 in #3002720.
+ - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
+ - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
+ - Fix problems noticed on Yahoo mail and news pages.
+ - Remove the too broad yahoo section, only keeping the
+ fast-redirects exception as discussed on ijbswa-devel@.
+ - Don't block adesklets.sourceforge.net. Reported in #2974204.
+ - Block chartbeat ping tracking. Reported in #2975895.
+ - Tag CSS and image requests with cautious and medium settings, too.
+ - Don't handle view.atdmt.com as image. It's used for click-throughs
+ so users should be able to "go there anyway".
+ Reported by Adam Piggott in #2975927.
+ - Also let the refresh-tags filter remove invalid refresh tags where
+ the 'url=' part is missing. Anonymously reported in #2986382.
+ While at it, update the description to mention the fact that only
+ refresh tags with refresh times above 9 seconds are covered.
+ - javascript needs to be blocked with +handle-as-empty-document to
+ work around Firefox bug 492459. So move .js blockers from
+ +block{Might be a web-bug.} -handle-as-empty-document to
+ +block{Might be a web-bug.} +handle-as-empty-document.
+ - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
+ - Block another omniture tracking domain.
+ - Added a range-requests tagger.
+ - Added two sections to get Flickr's Ajax interface working with
+ default pre-settings. If you change the configuration to block
+ cookies by default, you'll need additional exceptions.
+ Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.
+
+- Documentation improvements:
+ - Explicitly mention how to match all URLs.
+ - Consistently recommend socks5 in the Tor FAQ entry and mention
+ its advantage compared to socks4a. Reported by David in #2960129.
+ - Slightly improve the explanation of why filtering may appear
+ slower than it is.
+ - Grammar fixes for the ACL section.
+ - Fixed a link to the 'intercepting' entry and add another one.
+ - Rename the 'Other' section to 'Mailing Lists' and reword it
+ to make it clear that nobody is forced to use the trackers
+ - Note that 'anonymously' posting on the trackers may not always
+ be possible.
+ - Suggest to enable debug 32768 when suspecting parsing problems.
+
+- Privoxy-Log-Parser improvements:
+ - Gather statistics for ressources, methods, and HTTP versions
+ used by the client.
+ - Also gather statistics for blocked and redirected requests.
+ - Provide the percentage of keep-alive offers the client accepted.
+ - Add a --url-statistics-threshold option.
+ - Add a --host-statistics-threshold option to also gather
+ statistics about how many request where made per host.
+ - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
+ - Add a --shorten-thread-ids option to replace the thread id with
+ a decimal number.
+ - Accept and ignore: Looks like we got the last chunk together
+ with the server headers. We better stop reading.
+ - Accept and ignore: Continue hack in da house.
+ - Accept and higlight: Rejecting connection from 10.0.0.2.
+ Maximum number of connections reached.
+ - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
+ - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
+ - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
+ - Accept and highlight: Reducing expected bytes to 0. Marking
+ the server socket tainted after throwing 4 bytes away.
+ - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'
+
+- Code cleanups:
+ - Remove the next member from the client_state struct. Only the main
+ thread needs access to all client states so give it its own struct.
+ - Garbage-collect request_contains_null_bytes().
+ - Ditch redundant code in unload_configfile().
+ - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
+ - In write_socket(), remove the write-only variable write_len in
+ an ifdef __OS2__ block. Spotted by cppcheck.
+ - In connect_to(), don't declare the variable 'flags' on OS/2 where
+ it isn't used. Spotted by cppcheck.
+ - Limit the scope of various variables. Spotted by cppcheck.
+ - In add_to_iob(), turn an interestingly looking for loop into a
+ boring while loop.
+ - Code cleanup in preparation for external filters.
+ - In listen_loop(), mention the socket on which we accepted the
+ connection, not just the source IP address.
+ - In write_socket(), also log the socket we're writing to.
+ - In log_error(), assert that escaped characters get logged
+ completely or not at all.
+ - In log_error(), assert that ival and sval have reasonable values.
+ There's no reason not to abort() if they don't.
+ - Remove an incorrect cgi_error_unknown() call in a
+ cannot-happen-situation in send_crunch_response().
+ - Clean up white-space in http_response definition and
+ move the crunch_reason to the beginning.
+ - Turn http_response.reason into an enum and rename it
+ to http_response.crunch_reason.
+ - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
+ - Fix white-space in a log message in remove_chunked_transfer_coding().
+ While at it, add a note that the message doesn't seem to
+ be entirely correct and should be improved later on.
+
+- GNUmakefile improvements:
+ - Use $(SSH) instead of ssh, so one only needs to specify a username once.
+ - Removed references to the action feedback thingy that hasn't been
+ working for years.
+ - Consistently use shell.sourceforge.net instead of shell.sf.net so
+ one doesn't need to check server fingerprints twice.
+ - Removed GNUisms in the webserver and webactions targets so they
+ work with standard tar.
+
+*** Version 3.0.16 Stable ***
+
+- Added the config file option handle-as-empty-doc-returns-ok to
+ work around Firefox bug #492459, which causes Firefox to hang
+ if JavaScripts are blocked in certain situations. The option is
+ enabled in the default config file.
+- Added the config file option default-server-timeout to control the
+ assumed default server timeout. Since Privoxy no longer returns
+ an error message for connection resets on reused client connections,
+ assuming larger server timeout values appears to actually work
+ pretty well as long as connections aren't shared.
+- Added optional support for FreeBSD's accf_http(9). Use the
+ configure option --enable-accept-filter to enable it.
+- Added fancier Privoxy icons for win32. Contributed by Jeff H.
+- In daemon mode, fd 0, 1 and 2 are bound to /dev/null.
+- Resolve localhost using whatever address family the operating
+ system feels like. Previous betas would try to use IPv4 as this
+ is what most users expect, but this didn't work reliably on
+ GNU/Linux systems.
+- In the action lists on CGI pages, actions and their parameters are
+ no longer separated with a space. The action file parser doesn't
+ actually allow this and will throw an invalid syntax error if actions
+ and parameters in the action files are separated. Not adding the
+ spaces means copy and pasting CGI output into the action files works.
+- The default keep-alive timeout has been reduced to 5 seconds to work
+ around hangs in clients that treat the proxy like any other host and
+ stop allowing any new connections if the "maximum number of
+ connections per host" is reached.
+- Several webbug URLs that look like they are leading to images are now
+ blocked as image instead of empty documents. Doing the latter causes
+ WebKit-based clients to show a "missing image" icon which may mess up
+ the layout.
+- The no-such-domain template is used for DNS resolution
+ problems with FEATURE_IPV6_SUPPORT enabled. Previously the
+ connect-failed template was used. Reported by 'zebul666'.
+- Accepts quoted expiration dates even though RFC 2109 10.1.2
+ doesn't seem to allow them. Reported anonymously.
+- Don't try to forget connections if connection sharing is disabled.
+ This wasn't a real problem but caused an unnecessary log message.
+- The still undocumented --enable-extended-host-patterns configure
+ option has a better description.
+- Fixed an error message that would claim a write to the server
+ failed when actually writing to the client failed.
+- Log the crunch reason before trying to write to the client.
+ The log is easier to read that way.
+- Several log messages about client connections also mention
+ the socket number.
+- handle-as-empty-document no longer depends on the image blocking
+ code being enabled.
+- Privoxy-Log-Parser is roughly 40% faster in highlighting mode.
+- uagen, a Firefox User-Agent generator for Privoxy and Mozilla
+ browsers has been imported and is available in the tarball's
+ tools directory.
+- The scripts in the tools directory treat unknown parameters
+ as fatal errors.
+
+*** Version 3.0.15 beta ***
+
+- In case of missing server data, no error message is send to the
+ client if the request arrived on a reused connection. The client
+ is then supposed to silently retry the request without bothering
+ the user. This should significantly reduce the frequency of the
+ "No server or forwarder data received" error message many users
+ reported.
+- More reliable detection of prematurely closed client sockets
+ with keep-alive enabled.
+- FEATURE_CONNECTION_KEEP_ALIVE is decoupled from
+ FEATURE_CONNECTION_SHARING and now available on
+ all platforms.
+- Improved handling of POST requests on reused connections.
+ Should fix problems with stalled connections after submitting
+ form data with some browser configurations.
+- Fixed various latency calculation issues.
+- Allows the client to pass NTLM authentication requests to a
+ forwarding proxy. This was already assumed and hinted to work
+ in 3.0.13 beta but actually didn't. Now it's confirmed to work
+ with IE, Firefox and Chrome.
+ Thanks to Francois Botha and Wan-Teh Chang
+- Fixed a calculation problem if receiving the server headers
+ takes more than two reads, that could cause Privoxy to terminate
+ the connection prematurely. Reported by Oliver.
+- Compiles again on platforms such as OpenBSD and systems
+ using earlier glibc version that don't support AI_ADDRCONFIG.
+ Anonymously submitted in #2872591.
+- A bunch of MS VC project files and Suse and Redhat RPM spec
+ files have been removed as they were no longer maintained for
+ quite some time.
+- Overly long action lines are properly rejected with a proper
+ error message. Previously they would be either rejected as
+ invalid or cause a core dump through abort().
+- Already timed-out connections are no longer temporarily remembered.
+ They weren't reused anyway, but wasted a socket slot.
+- len refers to the number of bytes actually read which might
+ differ from the ones received. Adjust log messages accordingly.
+- The optional JavaScript on the CGI page uses encodeURIComponent()
+ instead of escape() which doesn't encode all characters that matter.
+ Anonymously reported in #2832722.
+- Fix gcc45 warnings in decompress_iob().
+- Various log message improvements.
+- Privoxy-Regression-Test supports redirect tests.
+- Privoxy-Log-Parser can gather some connection statistics.
+
+*** Version 3.0.14 beta ***
+
+- The latency is taken into account when evaluating whether or not to
+ reuse a connection. This should significantly reduce the number of
+ connections problems several users reported.
+- If the server doesn't specify how long the connection stays alive,
+ Privoxy errs on the safe side of caution and assumes it's only a second.
+- The error pages for connection timeouts or missing server data use a
+ Last-Modified date in the past. Retry attempts are detected and Privoxy
+ removes the If-Modified-Since header to prevent the server from responding
+ with status code 304 in which case the client would reuse the error message.
+- Setting keep-alive-timeout to 0 disables keep-alive support. Previously
+ Privoxy would claim to allow persistence but not reuse the connection.
+- Pipelined requests are less likely to be mistaken for the request
+ body of the previous request. Note that Privoxy still has no real
+ pipeline support and will either serialize pipelined requests or
+ drop them in which case the client has to resent them.
+- Fixed a crash on some Windows versions when header randomization
+ is enabled and the date couldn't be parsed.
+- Privoxy's keep-alive timeout for the current connection is reduced
+ to the one specified in the client's Keep-Alive header.
+- For HTTP/1.1 requests, Privoxy implies keep-alive support by not
+ setting any Connection header instead of using 'Connection: keep-alive'.
+- If the socket isn't reusable, Privoxy doesn't temporarily waste
+ a socket slot to remember the connection.
+- If keep-alive support is disabled but compiled in, the client's
+ Keep-Alive header is removed.
+- Fixed a bug on mingw32 where downloading large files failed if
+ keep-alive support was enabled.
+- Fixed a bug that (at least theoretically) could cause log
+ timestamps to be occasionally off by about a second.
+- No Proxy-Connection header if added if there already is one.
+- The configure script respects the $PATH variable when searching
+ for groups and id.
+
+*** Version 3.0.13 beta ***
+
+- Added IPv6 support. Thanks to Petr Pisar who not only provided
+ the initial patch but also helped a lot with the integration.
+- Added client-side keep-alive support.
+- The connection sharing code is only used if the connection-sharing
+ option is enabled.
+- The max-client-connections option has been added to restrict
+ the number of client connections below a value enforced by
+ the operating system.
+- Fixed a regression reintroduced in 3.0.12 that could cause
+ crashes on mingw32 if header date randomization was enabled.
+- Compressed content with extra fields couldn't be decompressed
+ and would get passed to the client unfiltered. This problem
+ has only be detected through statical analysis with clang as
+ nobody seems to be using extra fields anyway.
+- If the server resets the Connection after sending only the headers
+ Privoxy forwards what it got to the client. Previously Privoxy
+ would deliver an error message instead.
+- Error messages in case of connection timeouts use the right
+ HTTP status code.
+- If spawning a child to handle a request fails, the client
+ gets an error message and Privoxy continues to listen for
+ new requests right away.
+- The error messages in case of server-connection timeouts or
+ prematurely closed server connections are now template-based.
+- If zlib support isn't compiled in, Privoxy no longer tries to
+ filter compressed content unless explicitly asked to do so.
+- In case of connections that are denied based on ACL directives,
+ the memory used for the client IP is no longer leaked.
+- Fixed another small memory leak if the client request times out
+ while waiting for client headers other than the request line.
+- The client socket is kept open until the server socket has
+ been marked as unused. This should increase the chances that
+ the still-open connection will be reused for the client's next
+ request to the same destination. Note that this only matters
+ if connection-sharing is enabled.
+- A TODO list has been added to the source tarball to give potential
+ volunteers a better idea of what the current goals are. Donations
+ are still welcome too: http://www.privoxy.org/faq/general.html#DONATE
+
+*** Version 3.0.12 ***
+
+- The socket-timeout option now also works on platforms whose
+ select() implementation modifies the timeout structure.
+ Previously the timeout was triggered even if the connection
+ didn't stall. Reported by cyberpatrol.
+- The Connection: keep-alive code properly deals with files
+ larger than 2GB. Previously the connection was closed too
+ early.
+- The content length for files above 2GB is logged correctly.
+- The user-manual directive on the show-status page links to
+ the documentation location specified with the directive,
+ not to the Privoxy website.
+- When running in daemon mode, Privoxy doesn't log anything
+ to the console unless there are errors before the logfile
+ has been opened.
+- The show-status page prints warnings about invalid directives
+ on the same line as the directives themselves.
+- Fixed several justified (but harmless) compiler warnings,
+ mostly on 64 bit platforms.
+- The mingw32 version explicitly requests the default charset
+ to prevent display problems with some fonts available on more
+ recent Windows versions. Patch by Burberry.
+- The mingw32 version uses the Privoxy icon in the alt-tab
+ windows. Patch by Burberry.
+- The timestamp and the thread id is omitted in the "Fatal error"
+ message box on mingw32.
+- Fixed two related mingw32-only buffer overflows. Triggering
+ them required control over the configuration file, therefore
+ this isn't seen as a security issue.
+- In verbose mode, or if the new option --show-skipped-tests
+ is used, Privoxy-Regression-Test logs skipped tests and the
+ skip reason.
+
+*** Version 3.0.11 ***
+
+- On most platforms, outgoing connections can be kept alive and
+ reused if the server supports it. Whether or not this improves
+ things depends on the connection.
+- When dropping privileges, membership in supplementary groups
+ is given up as well. Not doing that can lead to Privoxy running
+ with more rights than necessary and violates the principle of
+ least privilege. Users of the --user option are advised to update.
+ Thanks to Matthias Drochner for reporting the problem,
+ providing the initial patch and testing the final version.
+- Passing invalid users or groups with the --user option
+ didn't lead to program exit. Regression introduced in 3.0.7.
+- The match all section has been moved from default.action
+ to a new file called match-all.action. As a result the
+ default.action no longer needs to be touched by the user
+ and can be safely overwritten by updates.
+- The standard.action file has been removed. Its content
+ is now part of the default.action file.
+- In some situations the logged content length was slightly too low.
+- Crunched requests are logged with their own log level.
+ If you used "debug 1" in the past, you'll probably want
+ to additionally enable "debug 1024", otherwise only passed
+ requests will be logged. If you only care about crunched
+ requests, simply replace "debug 1" with "debug 1024".
+- The crunch reason has been moved to the beginning of the
+ crunch message. For HTTP URLs, the protocol is logged as well.
+- Log messages are shortened by printing the thread id on its
+ own (as opposed to putting it inside the string "Privoxy()").
+- The config option socket-timeout has been added to control
+ the time Privoxy waits for data to arrive on a socket.
- Support for remote toggling is controlled by the configure
option --disable-toggle only. In previous versions it also
depended on the action editor and thus configuring with the
--disable-editor option would disable remote toggling support
as well.
+- Requests with invalid HTTP versions are rejected.
+- The template symbol @date@ can be used to include a date(1)-like
+ time string. Initial patch submitted by Endre Szabo.
+- Responses from shoutcast servers are accepted again.
+ Problem reported and fix suggested by Stefan.
- The hide-forwarded-for-headers action has been replaced with
the change-x-forwarded-for{} action which can also be used to
add X-Forwarded-For headers. The latter functionality already
existed in Privoxy versions prior to 3.0.7 but has been removed
as it was often used unintentionally (by not using the
hide-forwarded-for-headers action).
+- A "clear log" view option was added to the mingw32 version
+ to clear out all of the lines in the Privoxy log window.
+ Based on a patch submitted by T Ford.
+- The mingw32 version uses "critical sections" now, which prevents
+ log message corruption under load. As a side effect, the
+ "no thread-safe PRNG" warning could be removed as well.
+- The mingw32 version's task bar icon is crossed out and
+ the color changed to gray if Privoxy is toggled off.
*** Version 3.0.10 ***
http://www.fabiankeil.de/sourcecode/privoxy-log-parser/
Documentation is available through perldoc(1).
-*** Version 3.0.9 Beta ***
+*** Version 3.0.9 beta ***
- Added SOCKS5 support (with address resolution done by
the SOCKS5 server). Patch provided by Eric M. Hopper.
config.txt referenced a nonexisting file
- Minor documentation fixes.
-*** Version 3.0.7 Beta ***
+*** Version 3.0.7 beta ***
- Added zlib support to filter content with gzip and deflate
encoding. (Patch provided by Wil Mahan)
forbidden characters like dots.
- New trust entries are saved with a comment that contains the
trusted referring URL (Suggested by Daniel Griscom).
-- Filter descriptions are HTML encoded automatically.
+- Filter descriptions are HTML encoded automatically.
- New config option "split-large-forms" to work
around a browser bug that caused IE6 and IE7 to ignore
the Submit button on the edit-actions-for-url CGI page.
Privoxy detection "attack". Note that detecting Privoxy is
still possible through other ways and Privoxy was never intended
to be invisible anyway.
-- Added support for AmigaOS 4, fixed build for AmigaOS 3.x.
+- Added support for AmigaOS 4, fixed build for AmigaOS 3.x.
- The show-url-info CGI page displays a warning if Privoxy
is currently toggled off.
- The show-status CGI page suppresses the edit button
- for action files if Privoxy has no write access.
+ for action files if Privoxy has no write access.
- Most CGI error pages react properly to HEAD requests.
- Requests with RFC 3253 HTTP methods (used by Subversion)
are accepted. (Patch provided by Petr Kadlec)
- Improved the filters img-reorder, js-annoyances, webbugs,
banners-by-size, banners-by-link and ie-exploits to make them
less likely to break anything.
-- Removed outdated URL patterns in default.action and added new ones.
+- Removed outdated URL patterns in default.action and added new ones.
- Added redirection from http://p.p/user-manual to http://p.p/user-manual/
- Changed webinterface default values for hide-user-agent, hide-referrer
and set-image-blocker.
-
-*** Version 3.0.5 Beta ***
+
+*** Version 3.0.5 beta ***
- Windows version can be installed/started as a service.
- Windows icon stays blue when Privoxy is idle, green when busy.
- Integrated Fabian Keil's extensive patch. See:
- http://www.fabiankeil.de/sourcecode/privoxy/. Includes the
- following new or significantly improved actions (among many
+ http://www.fabiankeil.de/sourcecode/privoxy/. Includes the
+ following new or significantly improved actions (among many
other improvements):
content-type-overwrite{}
- Added jpeg filtering to defend against MS jpeg vulnerability MS04-028
with the new inspect-jpegs action.
- Removed the "arbitrary" 1000 filter limit - addresses tracker #911950
-- Thanks to Jindrich Makovicka for a race condition fix for the log
+- Thanks to Jindrich Makovicka for a race condition fix for the log
file. The race condition remains for non-pthread implementations.
Reference patch #1175720. Various other logging enhancements.
- A pile of assorted bug fixes, memory leaks, enhancements, etc.
- Moved Actions file reporting mechanism to SF tracker.
-- Two new options for config: enable-remote-http-toggle and
+- Two new options for config: enable-remote-http-toggle and
forwarded-connect-retries.
- Trap unsupported FTP requests.
- Let text/xml be filtered.
- Numerous updates to default.action
-- Increase the compiled in limit of trusted referrers from 64 to 512
+- Increase the compiled in limit of trusted referrers from 64 to 512
(for trustfile users).
*** Version 3.0.3 ***
- Workarounds for client (iTunes etc) and server (PHP < 4.2.3) bugs
including the notorious "blank page" problem.
- Various filter improvements; most notably the unsolicited-popups
- filter became less destructive
+ filter became less destructive
- Major revamp of the actions file
-
+
*** Version 3.0.2 ***
- Fixed two memory leaks, one serious
- Fixed bug in pcrs which could cause crashes with user-defined filters
- Fixed bug in domain name matching
-- Assorted small fixes (Win32 menu, CGI URL editor, ..)
+- Assorted small fixes (Win32 menu, CGI URL editor, ..)
- Added basic support for the OPTIONS and TRACE http methods
- Added workaround for Bug in Mac OSX that made Privoxy crash occasionally
- Refined the default action file through >400 items of user feedback
- Replaced filter "popups" by choice between two modes:
- "unsolicited-popups" tries to catch only the unsolicited ones
- "all-popups" tries to kill them all (as before)
- - New filter "tiny-textforms" Help those tiny or hard-wrap textareas.
+ - New filter "tiny-textforms" Help those tiny or hard-wrap textareas.
- New filter "jumping-windows" that prevents windows from resizing
and moving themselves
- New filter "demoronizer" which fixes MS's abuse of std charsets
- Added quicktime-kioskmode filter and improved frameset-borders
- Updated default.action based on latest feedback
- New PDF doc build process
-- Add a user contrib module to cvs:
+- Add a user contrib module to cvs:
http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/contrib/
*** Version 2.9.18 ***
- Three filters fixed (again!)
- Assorted small fixes and doc enhancements
-*** Version 2.9.16 ***
+*** Version 2.9.16 ***
- Major revamp of default.action to get rid of years of cruft.
- Same for default.filter
- user-manual directive added to config for help links from within CGI
editor.
- Multiple actions files can now be specified in config.
-- Actions files are changed to: default.action, standard.action, and
+- Actions files are changed to: default.action, standard.action, and
user.action. user.action is for personal/local configuration.
- The usual many small and miscellaneous bug and security fixes.
-*** Version 2.9.14 Beta ***
+*** Version 2.9.14 beta ***
- Fix Solaris compile problem (gateway.h and filters.h)
- Makefile fixes for Solaris, FreeBSD (?)
- #include mechansim for common text in templates
- Various other minor fixes.
-*** Version 2.9.13 Beta ***
+*** Version 2.9.13 beta ***
-- *NEWS*: The project has been renamed to Privoxy! The new name is
+- *NEWS*: The project has been renamed to Privoxy! The new name is
reflected throughout (file locations, etc).
-- ijb.action is now default.action. re_filterfile is now
+- ijb.action is now default.action. re_filterfile is now
default.filter.
- http://i.j.b/ is now http://p.p/
-- The 'logo' option for replacing ad iamges is removed now. 'Pattern'
+- The 'logo' option for replacing ad iamges is removed now. 'Pattern'
(checkerboard) is now the default.
- RPM spec file make over.
-*** Version 2.9.12 Beta ***
+*** Version 2.9.12 beta ***
-- **READ**: The default listening PORT is NOW 8118!!! Changed from
- 8000 due to conflict with NAS (Network Audio Server, whatever that
+- **READ**: The default listening PORT is NOW 8118!!! Changed from
+ 8000 due to conflict with NAS (Network Audio Server, whatever that
is.)
- More CGI actions editor fixes and improvements.
- Win32 command line fix ups.
-- re_filterfile now has modular sections that can be activated on a
+- re_filterfile now has modular sections that can be activated on a
per site basis. Some new goodies there too.
- +filter now takes arguments to match FILTER sections in re_filterfile
- for even more flexibility.
-- Added a new image blocker option: +image-blocker{pattern}, which
+ for even more flexibility.
+- Added a new image blocker option: +image-blocker{pattern}, which
displays a checkerboard patthern and scales better than the logo.
- PNG images will be used in place of GIF for JB built-in images
if configured with --enable-no-gif.
- CGI Editor works on OS/2 now.
- Fix restart failure where sockets were in TIME_WAIT.
- Fixes for actions cgi editor, make sure we have right file.
-- A --pidfile command line option now, in addition to --help,
+- A --pidfile command line option now, in addition to --help,
--version, --no-daemon, --user and configfile. --no-daemon replaces
- the former -d option and _DEBUG define. --user will drop privileges
+ the former -d option and _DEBUG define. --user will drop privileges
to the specified user.
- Signal handling cleanups (*nix).
- CGI actions editor improvements and fixes.
- Error handling improvements, especially out of memory.
-- Default re_filterfile fix that caused spurious IJB logos
+- Default re_filterfile fix that caused spurious IJB logos
(instead of 'blank').
- configure.in threading fixes for Solaris.
- Various other minor fixes.
-*** Version 2.9.11 Beta Changes ***
+*** Version 2.9.11 beta Changes ***
-- Add "session" cookie concept where cookies exist for the life
-of that browser session only (ie never goes to disk).
+- Add "session" cookie concept where cookies exist for the life
+ of that browser session only (ie never goes to disk).
- Checks for correct header length.
- Fix user:pass@host.domain.com auth bug.
- Better signal handling on *nix.
- Fix CFLAGS hard-coded in configure.in
-- Fix threading bug re: gethostbyname() that caused random
-URLs to fail in some cases.
+- Fix threading bug re: gethostbyname() that caused random
+ URLs to fail in some cases.
*** Version 2.9.11 Alpha Changes ***
and the home page:
http://ijbswa.sourceforge.net/
... and various URLs which will be intercepted by Junkbuster anyway.
-TODO: Still need to do something with the URLs in Junkbuster Corp's
+TODO: Still need to do something with the URLs in Junkbuster Corp's
copyright/trademark notice on the bottom of the show-proxy-args page.
- PCRE or GNU Regex is now a #define option.
patch war ;-)
- Cut the credit for the ยง-referrer-option from the config file,
that Stefan had placed there.
-- Improved the re_filterfile
+- Improved the re_filterfile
*** Version 2.9.0 pre-Alpha Changes ***
- Now use PCRE, not GNU REGEX. I have not yet had chance to check the
syntax of the block/image/cookie file to ensure that they match what
is expected - however they seem to work.
-- Replaced "configure" script with one generated by "autoconf". Also
-use a header "config.h" (was ijbconfig.h in my previous release) for
-the #defines. "config.h" is now generated with "autoheader" from
+- Replaced "configure" script with one generated by "autoconf". Also
+use a header "config.h" (was ijbconfig.h in my previous release) for
+the #defines. "config.h" is now generated with "autoheader" from
"acconfig.h" and "configure.in". (Note that to install you do not
need autoconf or autoheader - just run "./configure".)
To see command-line options, run "./configure --help".
popup file, conditional image file, and integration of popup code.
- ACL, Jar and trust files conditionally compiled.
- New source file headers.
-- Various cosmetic changes. (But I have not consistently ordered the
+- Various cosmetic changes. (But I have not consistently ordered the
config files - I think that's worthwhile, but it's 1am and I want to
get this released!)
- RCS tags on .h files.
- Version number changes to 2.9.0
-
----------------------------------------------------------------------
-Copyright : Written by and Copyright (C) 2001-2008 the SourceForge
+Copyright : Written by and Copyright (C) 2001-2013 the
Privoxy team. http://www.privoxy.org/
Based on the Internet Junkbuster originally written
- by and Copyright (C) 1997 Anonymous Coders and
+ by and Copyright (C) 1997 Anonymous Coders and
Junkbusters Corporation. http://www.junkbusters.com/
- This program is free software; you can redistribute it
+ This program is free software; you can redistribute it
and/or modify it under the terms of the GNU General
Public License as published by the Free Software
Foundation; either version 2 of the License, or (at