+# Thus, by placing a # at the start of an existing configuration
+# line, you can make it a comment and it will be treated as if it
+# weren't there. This is called "commenting out" an option and can
+# be useful. Removing the # again is called "uncommenting".
+#
+# Note that commenting out an option and leaving it at its default
+# are two completely different things! Most options behave very
+# differently when unset. See the "Effect if unset" explanation in
+# each option's description for details.
+#
+# Long lines can be continued on the next line by using a `\' as the
+# last character.
+#
+#
+# 1. LOCAL SET-UP DOCUMENTATION
+# ==============================
+#
+# If you intend to operate Privoxy for more users than just
+# yourself, it might be a good idea to let them know how to reach
+# you, what you block and why you do that, your policies, etc.
+#
+#
+# 1.1. user-manual
+# =================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# https://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is the single best source of information
+# on Privoxy, and is used for help links from some of the
+# internal CGI pages. The manual itself is normally packaged
+# with the binary distributions, so you probably want to set
+# this to a locally installed copy.
+#
+# Examples:
+#
+# The best all purpose solution is simply to put the full local
+# PATH to where the User Manual is located:
+#
+# user-manual /usr/share/doc/privoxy/user-manual
+#
+# The User Manual is then available to anyone with access to
+# Privoxy, by following the built-in URL: http://
+# config.privoxy.org/user-manual/ (or the shortcut: http://p.p/
+# user-manual/).
+#
+# If the documentation is not on the local system, it can be
+# accessed from a remote server, as:
+#
+# user-manual http://example.com/privoxy/user-manual/
+#
+# WARNING!!!
+#
+# If set, this option should be the first option in the
+# config file, because it is used while the config file is
+# being read.
+#
+#user-manual https://www.privoxy.org/user-manual/
+#
+# 1.2. trust-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental
+# trust mechanism has been activated. (See trustfile below.)
+#
+# If you use the trust mechanism, it is a good idea to write up
+# some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
+#trust-info-url http://www.example.com/why_we_block.html
+#trust-info-url http://www.example.com/what_we_allow.html
+#
+# 1.3. admin-address
+# ===================
+#
+# Specifies:
+#
+# An email address to reach the Privoxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not be
+# shown.
+#
+#admin-address privoxy-admin@example.com
+#
+# 1.4. proxy-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not be
+# shown.
+#
+# This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+#
+# 2. CONFIGURATION AND LOG FILE LOCATIONS
+# ========================================
+#
+# Privoxy can (and normally does) use a number of other files for
+# additional configuration, help and logging. This section of the
+# configuration file tells Privoxy where to find those other files.
+#
+# The user running Privoxy, must have read permission for all
+# configuration files, and write permission to any files that would
+# be modified, such as log files and actions files.
+#
+#
+# 2.1. confdir
+# =============
+#
+# Specifies:
+#
+# The directory where the other configuration files are located.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+confdir .
+#
+# 2.2. templdir
+# ==============
+#
+# Specifies:
+#
+# An alternative directory where the templates are loaded from.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# unset
+#
+# Effect if unset:
+#
+# The templates are assumed to be located in confdir/template.
+#
+# Notes:
+#
+# Privoxy's original templates are usually overwritten with each
+# update. Use this option to relocate customized templates that
+# should be kept. As template variables might change between
+# updates, you shouldn't expect templates to work with Privoxy
+# releases other than the one they were part of, though.
+#
+#templdir .
+#
+# 2.3. temporary-directory
+# =========================
+#
+# Specifies:
+#
+# A directory where Privoxy can create temporary files.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# unset
+#
+# Effect if unset:
+#
+# No temporary files are created, external filters don't work.
+#
+# Notes:
+#
+# To execute external filters, Privoxy has to create temporary
+# files. This directive specifies the directory the temporary
+# files should be written to.
+#
+# It should be a directory only Privoxy (and trusted users) can
+# access.
+#
+#temporary-directory .
+#
+# 2.4. logdir
+# ============
+#
+# Specifies:
+#
+# The directory where all logging takes place (i.e. where the
+# logfile is located).
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+logdir .
+#
+# 2.5. actionsfile
+# =================
+#
+# Specifies:
+#
+# The actions file(s) to use
+#
+# Type of value:
+#
+# Complete file name, relative to confdir
+#
+# Default values:
+#
+# match-all.action # Actions that are applied to all sites and maybe overruled later on.
+#
+# default.action # Main actions file
+#
+# user.action # User customizations
+#
+# Effect if unset:
+#
+# No actions are taken at all. More or less neutral proxying.
+#
+# Notes:
+#
+# Multiple actionsfile lines are permitted, and are in fact
+# recommended!
+#
+# The default values are default.action, which is the "main"
+# actions file maintained by the developers, and user.action,
+# where you can make your personal additions.
+#
+# Actions files contain all the per site and per URL
+# configuration for ad blocking, cookie management, privacy
+# considerations, etc.
+#
+actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
+actionsfile default.action # Main actions file
+actionsfile user.action # User customizations
+#
+# 2.6. filterfile
+# ================
+#
+# Specifies:
+#
+# The filter file(s) to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.filter (Unix) or default.filter.txt (Windows)
+#
+# Effect if unset:
+#
+# No textual content filtering takes place, i.e. all +filter{name}
+# actions in the actions files are turned neutral.
+#
+# Notes:
+#
+# Multiple filterfile lines are permitted.
+#
+# The filter files contain content modification rules that use
+# regular expressions. These rules permit powerful changes on
+# the content of Web pages, and optionally the headers as well,
+# e.g., you could try to disable your favorite JavaScript
+# annoyances, re-write the actual displayed text, or just have
+# some fun playing buzzword bingo with web pages.
+#
+# The +filter{name} actions rely on the relevant filter (name)
+# to be defined in a filter file!
+#
+# A pre-defined filter file called default.filter that contains
+# a number of useful filters for common problems is included in
+# the distribution. See the section on the filter action for a
+# list.
+#
+# It is recommended to place any locally adapted filters into a
+# separate file, such as user.filter.
+#
+filterfile default.filter
+filterfile user.filter # User customizations
+#
+# 2.7. logfile
+# =============
+#
+# Specifies:
+#
+# The log file to use
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: logfile (Unix) or
+# privoxy.log (Windows).
+#
+# Effect if unset:
+#
+# No logfile is written.
+#
+# Notes:
+#
+# The logfile is where all logging and error messages are
+# written. The level of detail and number of messages are set
+# with the debug option (see below). The logfile can be useful
+# for tracking down a problem with Privoxy (e.g., it's not
+# blocking an ad you think it should block) and it can help you
+# to monitor what your browser is doing.
+#
+# Depending on the debug options below, the logfile may be a
+# privacy risk if third parties can get access to it. As most
+# users will never look at it, Privoxy only logs fatal errors by
+# default.
+#
+# For most troubleshooting purposes, you will have to change
+# that, please refer to the debugging section for details.
+#
+# Any log files must be writable by whatever user Privoxy is
+# being run as (on Unix, default user id is "privoxy").
+#
+# To prevent the logfile from growing indefinitely, it is
+# recommended to periodically rotate or shorten it. Many
+# operating systems support log rotation out of the box, some
+# require additional software to do it. For details, please
+# refer to the documentation for your operating system.
+#
+logfile logfile
+#
+# 2.8. trustfile
+# ===============
+#
+# Specifies:
+#
+# The name of the trust file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: trust (Unix) or
+# trust.txt (Windows)
+#
+# Effect if unset:
+#
+# The entire trust mechanism is disabled.
+#
+# Notes:
+#
+# The trust mechanism is an experimental feature for building
+# white-lists and should be used with care. It is NOT
+# recommended for the casual user.
+#
+# If you specify a trust file, Privoxy will only allow access to
+# sites that are specified in the trustfile. Sites can be listed
+# in one of two ways:
+#
+# Prepending a ~ character limits access to this site only (and
+# any sub-paths within this site), e.g. ~www.example.com allows
+# access to ~www.example.com/features/news.html, etc.
+#
+# Or, you can designate sites as trusted referrers, by
+# prepending the name with a + character. The effect is that
+# access to untrusted sites will be granted -- but only if a
+# link from this trusted referrer was used to get there. The
+# link target will then be added to the "trustfile" so that
+# future, direct accesses will be granted. Sites added via this
+# mechanism do not become trusted referrers themselves (i.e.
+# they are added with a ~ designation). There is a limit of 512
+# such entries, after which new entries will not be made.
+#
+# If you use the + operator in the trust file, it may grow
+# considerably over time.
+#
+# It is recommended that Privoxy be compiled with the
+# --disable-force, --disable-toggle and --disable-editor
+# options, if this feature is to be used.
+#
+# Possible applications include limiting Internet access for
+# children.
+#
+#trustfile trust
+#
+# 3. DEBUGGING
+# =============
+#
+# These options are mainly useful when tracing a problem. Note that
+# you might also want to invoke Privoxy with the --no-daemon command
+# line option when debugging.
+#
+#
+# 3.1. debug
+# ===========
+#
+# Specifies:
+#
+# Key values that determine what information gets logged.
+#
+# Type of value:
+#
+# Integer values
+#
+# Default value:
+#
+# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are
+# logged)
+#
+# Effect if unset:
+#
+# Default value is used (see above).
+#
+# Notes:
+#
+# The available debug levels are:
+#
+# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data written to the network
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filters
+# debug 128 # debug redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
+# debug 32768 # log all data read from the network
+# debug 65536 # Log the applying actions
+#
+# To select multiple debug levels, you can either add them or
+# use multiple debug lines.
+#
+# A debug level of 1 is informative because it will show you
+# each request as it happens. 1, 1024, 4096 and 8192 are
+# recommended so that you will notice when things go wrong. The
+# other levels are probably only of interest if you are hunting
+# down a specific problem. They can produce a hell of an output
+# (especially 16).
+#
+# If you are used to the more verbose settings, simply enable
+# the debug lines below again.
+#
+# If you want to use pure CLF (Common Log Format), you should
+# set "debug 512" ONLY and not enable anything else.
+#
+# Privoxy has a hard-coded limit for the length of log messages.
+# If it's reached, messages are logged truncated and marked with
+# "... [too long, truncated]".
+#
+# Please don't file any support requests without trying to
+# reproduce the problem with increased debug level first. Once
+# you read the log messages, you may even be able to solve the
+# problem on your own.
+#
+#debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+#debug 4096 # Startup banner and warnings
+#debug 8192 # Non-fatal errors
+#
+# 3.2. single-threaded
+# =====================
+#
+# Specifies:
+#
+# Whether to run only one server thread.
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Multi-threaded (or, where unavailable: forked) operation, i.e.
+# the ability to serve multiple requests simultaneously.
+#
+# Notes:
+#
+# This option is only there for debugging purposes. It will
+# drastically reduce performance.
+#
+#single-threaded 1
+#
+# 3.3. hostname
+# ==============
+#
+# Specifies:
+#
+# The hostname shown on the CGI pages.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# The hostname provided by the operating system is used.
+#
+# Notes:
+#
+# On some misconfigured systems resolving the hostname fails or
+# takes too much time and slows Privoxy down. Setting a fixed
+# hostname works around the problem.
+#
+# In other circumstances it might be desirable to show a
+# hostname other than the one returned by the operating system.
+# For example if the system has several different hostnames and
+# you don't want to use the first one.
+#
+# Note that Privoxy does not validate the specified hostname
+# value.
+#
+#hostname hostname.example.org
+#
+# 4. ACCESS CONTROL AND SECURITY
+# ===============================
+#
+# This section of the config file controls the security-relevant
+# aspects of Privoxy's configuration.
+#
+#
+# 4.1. listen-address
+# ====================
+#
+# Specifies:
+#
+# The address and TCP port on which Privoxy will listen for
+# client requests.
+#
+# Type of value:
+#
+# [IP-Address]:Port
+#
+# [Hostname]:Port
+#
+# Default value:
+#
+# 127.0.0.1:8118
+#
+# Effect if unset:
+#
+# Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is
+# suitable and recommended for home users who run Privoxy on the
+# same machine as their browser.
+#
+# Notes:
+#
+# You will need to configure your browser(s) to this proxy
+# address and port.
+#
+# If you already have another service running on port 8118, or
+# if you want to serve requests from other machines (e.g. on
+# your local network) as well, you will need to override the
+# default.
+#
+# You can use this statement multiple times to make Privoxy
+# listen on more ports or more IP addresses. Suitable if your
+# operating system does not support sharing IPv6 and IPv4
+# protocols on the same socket.
+#
+# If a hostname is used instead of an IP address, Privoxy will
+# try to resolve it to an IP address and if there are multiple,
+# use the first one returned.
+#
+# If the address for the hostname isn't already known on the
+# system (for example because it's in /etc/hostname), this may
+# result in DNS traffic.
+#
+# If the specified address isn't available on the system, or if
+# the hostname can't be resolved, Privoxy will fail to start.
+#
+# IPv6 addresses containing colons have to be quoted by
+# brackets. They can only be used if Privoxy has been compiled
+# with IPv6 support. If you aren't sure if your version supports
+# it, have a look at http://config.privoxy.org/show-status.
+#
+# Some operating systems will prefer IPv6 to IPv4 addresses even
+# if the system has no IPv6 connectivity which is usually not
+# expected by the user. Some even rely on DNS to resolve
+# localhost which mean the "localhost" address used may not
+# actually be local.
+#
+# It is therefore recommended to explicitly configure the
+# intended IP address instead of relying on the operating
+# system, unless there's a strong reason not to.
+#
+# If you leave out the address, Privoxy will bind to all IPv4
+# interfaces (addresses) on your machine and may become
+# reachable from the Internet and/or the local network. Be aware
+# that some GNU/Linux distributions modify that behaviour
+# without updating the documentation. Check for non-standard
+# patches if your Privoxy version behaves differently.
+#
+# If you configure Privoxy to be reachable from the network,
+# consider using access control lists (ACL's, see below), and/or
+# a firewall.
+#
+# If you open Privoxy to untrusted users, you will also want to
+# make sure that the following actions are disabled:
+# enable-edit-actions and enable-remote-toggle
+#
+# Example:
+#
+# Suppose you are running Privoxy on a machine which has the
+# address 192.168.0.1 on your local private network
+# (192.168.0.0) and has another outside connection with a
+# different address. You want it to serve requests from inside
+# only:
+#
+# listen-address 192.168.0.1:8118
+#
+# Suppose you are running Privoxy on an IPv6-capable machine and
+# you want it to listen on the IPv6 address of the loopback
+# device:
+#
+# listen-address [::1]:8118
+#
+listen-address 127.0.0.1:8118
+#
+# 4.2. toggle
+# ============
+#
+# Specifies:
+#
+# Initial state of "toggle" status
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Act as if toggled on
+#
+# Notes:
+#
+# If set to 0, Privoxy will start in "toggled off" mode, i.e.
+# mostly behave like a normal, content-neutral proxy with both
+# ad blocking and content filtering disabled. See
+# enable-remote-toggle below.
+#
+toggle 1
+#
+# 4.3. enable-remote-toggle
+# ==========================
+#
+# Specifies:
+#
+# Whether or not the web-based toggle feature may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based toggle feature is disabled.
+#
+# Notes:
+#
+# When toggled off, Privoxy mostly acts like a normal,
+# content-neutral proxy, i.e. doesn't block ads or filter
+# content.
+#
+# Access to the toggle feature can not be controlled separately
+# by "ACLs" or HTTP authentication, so that everybody who can
+# access Privoxy (see "ACLs" and listen-address above) can
+# toggle it for all users. So this option is not recommended for
+# multi-user environments with untrusted users.
+#
+# Note that malicious client side code (e.g Java) is also
+# capable of using this option.
+#
+# As a lot of Privoxy users don't read documentation, this
+# feature is disabled by default.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-remote-toggle 0
+#
+# 4.4. enable-remote-http-toggle
+# ===============================
+#
+# Specifies:
+#
+# Whether or not Privoxy recognizes special HTTP headers to
+# change its behaviour.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores special HTTP headers.
+#
+# Notes:
+#
+# When toggled on, the client can change Privoxy's behaviour by
+# setting special HTTP headers. Currently the only supported
+# special header is "X-Filter: No", to disable filtering for the
+# ongoing request, even if it is enabled in one of the action
+# files.
+#
+# This feature is disabled by default. If you are using Privoxy
+# in a environment with trusted clients, you may enable this
+# feature at your discretion. Note that malicious client side
+# code (e.g Java) is also capable of using this feature.
+#
+# This option will be removed in future releases as it has been
+# obsoleted by the more general header taggers.
+#
+enable-remote-http-toggle 0
+#
+# 4.5. enable-edit-actions
+# =========================
+#
+# Specifies:
+#
+# Whether or not the web-based actions file editor may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based actions file editor is disabled.
+#
+# Notes:
+#
+# Access to the editor can not be controlled separately by
+# "ACLs" or HTTP authentication, so that everybody who can
+# access Privoxy (see "ACLs" and listen-address above) can
+# modify its configuration for all users.
+#
+# This option is not recommended for environments with untrusted
+# users and as a lot of Privoxy users don't read documentation,
+# this feature is disabled by default.
+#
+# Note that malicious client side code (e.g Java) is also
+# capable of using the actions editor and you shouldn't enable
+# this options unless you understand the consequences and are
+# sure your browser is configured correctly.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-edit-actions 0
+#
+# 4.6. enforce-blocks
+# ====================
+#
+# Specifies:
+#
+# Whether the user is allowed to ignore blocks and can "go there
+# anyway".
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Blocks are not enforced.
+#
+# Notes:
+#
+# Privoxy is mainly used to block and filter requests as a
+# service to the user, for example to block ads and other junk
+# that clogs the pipes. Privoxy's configuration isn't perfect
+# and sometimes innocent pages are blocked. In this situation it
+# makes sense to allow the user to enforce the request and have
+# Privoxy ignore the block.
+#
+# In the default configuration Privoxy's "Blocked" page contains
+# a "go there anyway" link to adds a special string (the force
+# prefix) to the request URL. If that link is used, Privoxy will
+# detect the force prefix, remove it again and let the request
+# pass.
+#
+# Of course Privoxy can also be used to enforce a network
+# policy. In that case the user obviously should not be able to
+# bypass any blocks, and that's what the "enforce-blocks" option
+# is for. If it's enabled, Privoxy hides the "go there anyway"
+# link. If the user adds the force prefix by hand, it will not
+# be accepted and the circumvention attempt is logged.
+#
+# Examples:
+#
+# enforce-blocks 1
+#
+enforce-blocks 0
+#
+# 4.7. ACLs: permit-access and deny-access
+# =========================================
+#
+# Specifies:
+#
+# Who can access what.
+#
+# Type of value:
+#
+# src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]]
+#
+# Where src_addr and dst_addr are IPv4 addresses in dotted
+# decimal notation or valid DNS names, port is a port number,
+# and src_masklen and dst_masklen are subnet masks in CIDR
+# notation, i.e. integer values from 2 to 30 representing the
+# length (in bits) of the network address. The masks and the
+# whole destination part are optional.
+#
+# If your system implements RFC 3493, then src_addr and dst_addr
+# can be IPv6 addresses delimeted by brackets, port can be a
+# number or a service name, and src_masklen and dst_masklen can
+# be a number from 0 to 128.
+#
+# Default value:
+#
+# Unset
+#
+# If no port is specified, any port will match. If no
+# src_masklen or src_masklen is given, the complete IP address
+# has to match (i.e. 32 bits for IPv4 and 128 bits for IPv6).
+#
+# Effect if unset:
+#
+# Don't restrict access further than implied by listen-address
+#
+# Notes:
+#
+# Access controls are included at the request of ISPs and
+# systems administrators, and are not usually needed by
+# individual users. For a typical home user, it will normally
+# suffice to ensure that Privoxy only listens on the localhost
+# (127.0.0.1) or internal (home) network address by means of the
+# listen-address option.
+#
+# Please see the warnings in the FAQ that Privoxy is not
+# intended to be a substitute for a firewall or to encourage
+# anyone to defer addressing basic security weaknesses.
+#
+# Multiple ACL lines are OK. If any ACLs are specified, Privoxy
+# only talks to IP addresses that match at least one
+# permit-access line and don't match any subsequent deny-access
+# line. In other words, the last match wins, with the default
+# being deny-access.
+#
+# If Privoxy is using a forwarder (see forward below) for a
+# particular destination URL, the dst_addr that is examined is
+# the address of the forwarder and NOT the address of the
+# ultimate target. This is necessary because it may be
+# impossible for the local Privoxy to determine the IP address
+# of the ultimate target (that's often what gateways are used
+# for).
+#
+# You should prefer using IP addresses over DNS names, because
+# the address lookups take time. All DNS names must resolve! You
+# can not use domain patterns like "*.org" or partial domain
+# names. If a DNS name resolves to multiple IP addresses, only
+# the first one is used.
+#
+# Some systems allow IPv4 clients to connect to IPv6 server
+# sockets. Then the client's IPv4 address will be translated by
+# the system into IPv6 address space with special prefix
+# ::ffff:0:0/96 (so called IPv4 mapped IPv6 address). Privoxy
+# can handle it and maps such ACL addresses automatically.
+#
+# Denying access to particular sites by ACL may have undesired
+# side effects if the site in question is hosted on a machine
+# which also hosts other sites (most sites are).
+#
+# Examples:
+#
+# Explicitly define the default behavior if no ACL and
+# listen-address are set: "localhost" is OK. The absence of a
+# dst_addr implies that all destination addresses are OK:
+#
+# permit-access localhost
+#
+# Allow any host on the same class C subnet as www.privoxy.org
+# access to nothing but www.example.com (or other domains hosted
+# on the same system):
+#
+# permit-access www.privoxy.org/24 www.example.com/32
+#
+# Allow access from any host on the 26-bit subnet 192.168.45.64
+# to anywhere, with the exception that 192.168.45.73 may not
+# access the IP address behind www.dirty-stuff.example.com:
+#
+# permit-access 192.168.45.64/26
+# deny-access 192.168.45.73 www.dirty-stuff.example.com
+#
+# Allow access from the IPv4 network 192.0.2.0/24 even if
+# listening on an IPv6 wild card address (not supported on all
+# platforms):
+#
+# permit-access 192.0.2.0/24
+#
+# This is equivalent to the following line even if listening on
+# an IPv4 address (not supported on all platforms):
+#
+# permit-access [::ffff:192.0.2.0]/120
+#
+#
+# 4.8. buffer-limit
+# ==================
+#
+# Specifies:
+#
+# Maximum size of the buffer for content filtering.
+#
+# Type of value:
+#
+# Size in Kbytes
+#
+# Default value:
+#
+# 4096
+#
+# Effect if unset:
+#
+# Use a 4MB (4096 KB) limit.
+#
+# Notes:
+#
+# For content filtering, i.e. the +filter and +deanimate-gif
+# actions, it is necessary that Privoxy buffers the entire
+# document body. This can be potentially dangerous, since a
+# server could just keep sending data indefinitely and wait for
+# your RAM to exhaust -- with nasty consequences. Hence this
+# option.
+#
+# When a document buffer size reaches the buffer-limit, it is
+# flushed to the client unfiltered and no further attempt to
+# filter the rest of the document is made. Remember that there
+# may be multiple threads running, which might require up to
+# buffer-limit Kbytes each, unless you have enabled
+# "single-threaded" above.
+#
+buffer-limit 4096
+#
+# 4.9. enable-proxy-authentication-forwarding
+# ============================================
+#
+# Specifies:
+#
+# Whether or not proxy authentication through Privoxy should
+# work.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Proxy authentication headers are removed.
+#
+# Notes:
+#
+# Privoxy itself does not support proxy authentication, but can
+# allow clients to authenticate against Privoxy's parent proxy.
+#
+# By default Privoxy (3.0.21 and later) don't do that and remove
+# Proxy-Authorization headers in requests and Proxy-Authenticate
+# headers in responses to make it harder for malicious sites to
+# trick inexperienced users into providing login information.
+#
+# If this option is enabled the headers are forwarded.
+#
+# Enabling this option is not recommended if there is no parent
+# proxy that requires authentication or if the local network
+# between Privoxy and the parent proxy isn't trustworthy. If
+# proxy authentication is only required for some requests, it is
+# recommended to use a client header filter to remove the
+# authentication headers for requests where they aren't needed.
+#
+enable-proxy-authentication-forwarding 0
+#
+# 4.10. trusted-cgi-referer
+# ==========================
+#
+# Specifies:
+#
+# A trusted website or webpage whose links can be followed to
+# reach sensitive CGI pages
+#
+# Type of value:
+#
+# URL or URL prefix
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No external pages are considered trusted referers.
+#
+# Notes:
+#
+# Before Privoxy accepts configuration changes through CGI pages
+# like client-tags or the remote toggle, it checks the Referer
+# header to see if the request comes from a trusted source.
+#
+# By default only the webinterface domains config.privoxy.org
+# and p.p are considered trustworthy. Requests originating from
+# other domains are rejected to prevent third-parties from
+# modifiying Privoxy's state by e.g. embedding images that
+# result in CGI requests.
+#
+# In some environments it may be desirable to embed links to CGI
+# pages on external pages, for example on an Intranet homepage
+# the Privoxy admin controls.
+#
+# The "trusted-cgi-referer" option can be used to add that page,
+# or the whole domain, as trusted source so the resulting
+# requests aren't rejected. Requests are accepted if the
+# specified trusted-cgi-refer is the prefix of the Referer.
+#
+# +-----------------------------------------------------+
+# | Warning |
+# |-----------------------------------------------------|
+# |Declaring pages the admin doesn't control trustworthy|
+# |may allow malicious third parties to modify Privoxy's|
+# |internal state against the user's wishes and without |
+# |the user's knowledge. |
+# +-----------------------------------------------------+
+#
+trusted-cgi-referer http://www.example.org/
+#
+#
+# 5. FORWARDING
+# ==============
+#
+# This feature allows routing of HTTP requests through a chain of
+# multiple proxies.
+#
+# Forwarding can be used to chain Privoxy with a caching proxy to
+# speed up browsing. Using a parent proxy may also be necessary if
+# the machine that Privoxy runs on has no direct Internet access.
+#
+# Note that parent proxies can severely decrease your privacy level.
+# For example a parent proxy could add your IP address to the
+# request headers and if it's a caching proxy it may add the "Etag"
+# header to revalidation requests again, even though you configured
+# Privoxy to remove it. It may also ignore Privoxy's header time
+# randomization and use the original values which could be used by
+# the server as cookie replacement to track your steps between
+# visits.
+#
+# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
+# 4 and SOCKS 4A protocols.
+#
+#
+# 5.1. forward
+# =============
+#
+# Specifies:
+#
+# To which parent HTTP proxy specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use / to
+# denote "all URLs". http_parent[:port] is the DNS name or IP
+# address of the parent HTTP proxy through which the requests
+# should be forwarded, optionally followed by its listening port
+# (default: 8000). Use a single dot (.) to denote "no
+# forwarding".
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use parent HTTP proxies.
+#
+# Notes:
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made directly to the web servers.
+#
+# http_parent can be a numerical IPv6 address (if RFC 3493 is
+# implemented). To prevent clashes with the port delimiter, the
+# whole IP address has to be put into brackets. On the other
+# hand a target_pattern containing an IPv6 address has to be put
+# into angle brackets (normal brackets are reserved for regular
+# expressions already).
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# Examples:
+#
+# Everything goes to an example parent proxy, except SSL on port
+# 443 (which it doesn't handle):
+#
+# forward / parent-proxy.example.org:8080
+# forward :443 .
+#
+# Everything goes to our example ISP's caching proxy, except for
+# requests to that ISP's sites:
+#
+# forward / caching-proxy.isp.example.net:8000
+# forward .isp.example.net .
+#
+# Parent proxy specified by an IPv6 address:
+#
+# forward / [2001:DB8::1]:8000
+#
+# Suppose your parent proxy doesn't support IPv6:
+#
+# forward / parent-proxy.example.org:8000
+# forward ipv6-server.example.org .
+# forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> .
+#
+#
+# 5.2. forward-socks4, forward-socks4a, forward-socks5 and forward-socks5t
+# =========================================================================
+#
+# Specifies:
+#
+# Through which SOCKS proxy (and optionally to which parent HTTP
+# proxy) specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern socks_proxy[:port] http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use / to
+# denote "all URLs". http_parent and socks_proxy are IP
+# addresses in dotted decimal notation or valid DNS names (
+# http_parent may be "." to denote "no HTTP forwarding"), and
+# the optional port parameters are TCP ports, i.e. integer
+# values from 1 to 65535
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use SOCKS proxies.
+#
+# Notes:
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# The difference between forward-socks4 and forward-socks4a is
+# that in the SOCKS 4A protocol, the DNS resolution of the
+# target hostname happens on the SOCKS server, while in SOCKS 4
+# it happens locally.
+#
+# With forward-socks5 the DNS resolution will happen on the
+# remote server as well.
+#
+# forward-socks5t works like vanilla forward-socks5 but lets
+# Privoxy additionally use Tor-specific SOCKS extensions.
+# Currently the only supported SOCKS extension is optimistic
+# data which can reduce the latency for the first request made
+# on a newly created connection.
+#
+# socks_proxy and http_parent can be a numerical IPv6 address
+# (if RFC 3493 is implemented). To prevent clashes with the port
+# delimiter, the whole IP address has to be put into brackets.
+# On the other hand a target_pattern containing an IPv6 address
+# has to be put into angle brackets (normal brackets are
+# reserved for regular expressions already).
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made (HTTP-wise) directly to the
+# web servers, albeit through a SOCKS proxy.
+#
+# Examples:
+#
+# From the company example.com, direct connections are made to
+# all "internal" domains, but everything outbound goes through
+# their ISP's proxy by way of example.com's corporate SOCKS 4A
+# gateway to the Internet.
+#
+# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080
+# forward .example.com .
+#
+# A rule that uses a SOCKS 4 gateway for all destinations but no
+# HTTP parent looks like this:
+#
+# forward-socks4 / socks-gw.example.com:1080 .
+#
+# To chain Privoxy and Tor, both running on the same system, you
+# would use something like:
+#
+# forward-socks5t / 127.0.0.1:9050 .
+#
+# Note that if you got Tor through one of the bundles, you may
+# have to change the port from 9050 to 9150 (or even another
+# one). For details, please check the documentation on the Tor
+# website.
+#
+# The public Tor network can't be used to reach your local
+# network, if you need to access local servers you therefore
+# might want to make some exceptions:
+#
+# forward 192.168.*.*/ .
+# forward 10.*.*.*/ .
+# forward 127.*.*.*/ .
+#
+# Unencrypted connections to systems in these address ranges
+# will be as (un)secure as the local network is, but the
+# alternative is that you can't reach the local network through
+# Privoxy at all. Of course this may actually be desired and
+# there is no reason to make these exceptions if you aren't sure
+# you need them.
+#
+# If you also want to be able to reach servers in your local
+# network by using their names, you will need additional
+# exceptions that look like this:
+#
+# forward localhost/ .
+#
+#
+# 5.3. forwarded-connect-retries
+# ===============================
+#
+# Specifies:
+#
+# How often Privoxy retries if a forwarded connection request
+# fails.
+#
+# Type of value:
+#
+# Number of retries.
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Connections forwarded through other proxies are treated like
+# direct connections and no retry attempts are made.
+#
+# Notes:
+#
+# forwarded-connect-retries is mainly interesting for socks4a
+# connections, where Privoxy can't detect why the connections
+# failed. The connection might have failed because of a DNS
+# timeout in which case a retry makes sense, but it might also
+# have failed because the server doesn't exist or isn't
+# reachable. In this case the retry will just delay the
+# appearance of Privoxy's error message.
+#
+# Note that in the context of this option, "forwarded
+# connections" includes all connections that Privoxy forwards
+# through other proxies. This option is not limited to the HTTP
+# CONNECT method.
+#
+# Only use this option, if you are getting lots of
+# forwarding-related error messages that go away when you try
+# again manually. Start with a small value and check Privoxy's
+# logfile from time to time, to see how many retries are usually
+# needed.
+#
+# Examples:
+#
+# forwarded-connect-retries 1
+#
+forwarded-connect-retries 0
+#
+# 6. MISCELLANEOUS
+# =================
+#
+# 6.1. accept-intercepted-requests
+# =================================
+#
+# Specifies:
+#
+# Whether intercepted requests should be treated as valid.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Only proxy requests are accepted, intercepted requests are
+# treated as invalid.
+#
+# Notes:
+#
+# If you don't trust your clients and want to force them to use
+# Privoxy, enable this option and configure your packet filter
+# to redirect outgoing HTTP connections into Privoxy.
+#
+# Note that intercepting encrypted connections (HTTPS) isn't
+# supported.
+#
+# Make sure that Privoxy's own requests aren't redirected as
+# well. Additionally take care that Privoxy can't intentionally
+# connect to itself, otherwise you could run into redirection
+# loops if Privoxy's listening port is reachable by the outside
+# or an attacker has access to the pages you visit.
+#
+# If you are running Privoxy as intercepting proxy without being
+# able to intercept all client requests you may want to adjust
+# the CGI templates to make sure they don't reference content
+# from config.privoxy.org.
+#
+# Examples:
+#
+# accept-intercepted-requests 1
+#
+accept-intercepted-requests 0
+#
+# 6.2. allow-cgi-request-crunching
+# =================================
+#
+# Specifies:
+#
+# Whether requests to Privoxy's CGI pages can be blocked or
+# redirected.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores block and redirect actions for its CGI pages.
+#
+# Notes:
+#
+# By default Privoxy ignores block or redirect actions for its
+# CGI pages. Intercepting these requests can be useful in
+# multi-user setups to implement fine-grained access control,
+# but it can also render the complete web interface useless and
+# make debugging problems painful if done without care.
+#
+# Don't enable this option unless you're sure that you really
+# need it.
+#
+# Examples:
+#
+# allow-cgi-request-crunching 1
+#
+allow-cgi-request-crunching 0
+#
+# 6.3. split-large-forms
+# =======================
+#
+# Specifies:
+#
+# Whether the CGI interface should stay compatible with broken
+# HTTP clients.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The CGI form generate long GET URLs.
+#
+# Notes:
+#
+# Privoxy's CGI forms can lead to rather long URLs. This isn't a
+# problem as far as the HTTP standard is concerned, but it can
+# confuse clients with arbitrary URL length limitations.
+#
+# Enabling split-large-forms causes Privoxy to divide big forms
+# into smaller ones to keep the URL length down. It makes
+# editing a lot less convenient and you can no longer submit all
+# changes at once, but at least it works around this browser
+# bug.
+#
+# If you don't notice any editing problems, there is no reason
+# to enable this option, but if one of the submit buttons
+# appears to be broken, you should give it a try.
+#
+# Examples:
+#
+# split-large-forms 1
+#
+split-large-forms 0