+# 6.16. client-specific-tag
+# ==========================
+#
+# Specifies:
+#
+# The name of a tag that will always be set for clients that
+# requested it through the webinterface.
+#
+# Type of value:
+#
+# Tag name followed by a description that will be shown in the
+# webinterface
+#
+# Default value:
+#
+# None
+#
+# Notes:
+#
+# Client-specific tags allow Privoxy admins to create different
+# profiles and let the users chose which one they want without
+# impacting other users.
+#
+# One use case is allowing users to circumvent certain blocks
+# without having to allow them to circumvent all blocks. This is
+# not possible with the enable-remote-toggle feature because it
+# would bluntly disable all blocks for all users and also affect
+# other actions like filters. It also is set globally which
+# renders it useless in most multi-user setups.
+#
+# After a client-specific tag has been defined with the
+# client-specific-tag directive, action sections can be
+# activated based on the tag by using a CLIENT-TAG pattern. The
+# CLIENT-TAG pattern is evaluated at the same priority as URL
+# patterns, as a result the last matching pattern wins. Tags
+# that are created based on client or server headers are
+# evaluated later on and can overrule CLIENT-TAG and URL
+# patterns!
+#
+# The tag is set for all requests that come from clients that
+# requested it to be set. Note that "clients" are differentiated
+# by IP address, if the IP address changes the tag has to be
+# requested again.
+#
+# Clients can request tags to be set by using the CGI interface
+# http://config.privoxy.org/client-tags. The specific tag
+# description is only used on the web page and should be phrased
+# in away that the user understands the effect of the tag.
+#
+# Examples:
+#
+# # Define a couple of tags, the described effect requires action sections
+# # that are enabled based on CLIENT-TAG patterns.
+# client-specific-tag circumvent-blocks Overrule blocks but do not affect other actions
+# client-specific-tag disable-content-filters Disable content-filters but do not affect other actions
+# client-specific-tag overrule-redirects Overrule redirect sections
+# client-specific-tag allow-cookies Do not crunch cookies in either direction
+# client-specific-tag change-tor-socks-port Change forward-socks5 settings to use a different Tor socks port (and circuits)
+# client-specific-tag no-https-inspection Disable HTTPS inspection
+# client-specific-tag no-tls-verification Don't verify certificates when http-inspection is enabled
+#
+#
+# 6.17. client-tag-lifetime
+# ==========================
+#
+# Specifies:
+#
+# How long a temporarily enabled tag remains enabled.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# 60
+#
+# Notes:
+#
+# In case of some tags users may not want to enable them
+# permanently, but only for a short amount of time, for example
+# to circumvent a block that is the result of an overly-broad
+# URL pattern.
+#
+# The CGI interface http://config.privoxy.org/client-tags
+# therefore provides a "enable this tag temporarily" option. If
+# it is used, the tag will be set until the client-tag-lifetime
+# is over.
+#
+# Example:
+#
+# # Increase the time to life for temporarily enabled tags to 3 minutes
+# client-tag-lifetime 180
+#
+#
+# 6.18. trust-x-forwarded-for
+# ============================
+#
+# Specifies:
+#
+# Whether or not Privoxy should use IP addresses specified with
+# the X-Forwarded-For header
+#
+# Type of value:
+#
+# 0 or one
+#
+# Default value:
+#
+# 0
+#
+# Notes:
+#
+# If clients reach Privoxy through another proxy, for example a
+# load balancer, Privoxy can't tell the client's IP address from
+# the connection. If multiple clients use the same proxy, they
+# will share the same client tag settings which is usually not
+# desired.
+#
+# This option lets Privoxy use the X-Forwarded-For header value
+# as client IP address. If the proxy sets the header, multiple
+# clients using the same proxy do not share the same client tag
+# settings.
+#
+# This option should only be enabled if Privoxy can only be
+# reached through a proxy and if the proxy can be trusted to set
+# the header correctly. It is recommended that ACL are used to
+# make sure only trusted systems can reach Privoxy.
+#
+# If access to Privoxy isn't limited to trusted systems, this
+# option would allow malicious clients to change the client tags
+# for other clients or increase Privoxy's memory requirements by
+# registering lots of client tag settings for clients that don't
+# exist.
+#
+# Example:
+#
+# # Allow systems that can reach Privoxy to provide the client
+# # IP address with a X-Forwarded-For header.
+# trust-x-forwarded-for 1
+#
+#
+# 6.19. receive-buffer-size
+# ==========================
+#
+# Specifies:
+#
+# The size of the buffer Privoxy uses to receive data from the
+# server.
+#
+# Type of value:
+#
+# Size in bytes
+#
+# Default value:
+#
+# 5000
+#
+# Notes:
+#
+# Increasing the receive-buffer-size increases Privoxy's memory
+# usage but can lower the number of context switches and thereby
+# reduce the cpu usage and potentially increase the throughput.
+#
+# This is mostly relevant for fast network connections and large
+# downloads that don't require filtering.
+#
+# Reducing the buffer size reduces the amount of memory Privoxy
+# needs to handle the request but increases the number of
+# systemcalls and may reduce the throughput.
+#
+# A dtrace command like: "sudo dtrace -n 'syscall::read:return /
+# execname == "privoxy"/ { @[execname] = llquantize(arg0, 10, 0,
+# 5, 20); @m = max(arg0)}'" can be used to properly tune the
+# receive-buffer-size. On systems without dtrace, strace or
+# truss may be used as less convenient alternatives.
+#
+# If the buffer is too large it will increase Privoxy's memory
+# footprint without any benefit. As the memory is (currently)
+# cleared before using it, a buffer that is too large can
+# actually reduce the throughput.
+#
+# Example:
+#
+# # Increase the receive buffer size
+# receive-buffer-size 32768
+#
+#
+# 7. HTTPS INSPECTION
+# ====================
+#
+# HTTPS inspection allows to filter encrypted requests and
+# responses. This is only supported when Privoxy has been built with
+# FEATURE_HTTPS_INSPECTION. If you aren't sure if your version
+# supports it, have a look at http://config.privoxy.org/show-status.
+#
+#
+# 7.1. ca-directory
+# ==================
+#
+# Specifies:
+#
+# Directory with the CA key, the CA certificate and the trusted
+# CAs file.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# ./CA
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the directory where the CA key, the
+# CA certificate and the trusted CAs file are located.
+#
+# The permissions should only let Privoxy and the Privoxy admin
+# access the directory.
+#
+# Example:
+#
+# ca-directory /usr/local/etc/privoxy/CA
+#
+#ca-directory /usr/local/etc/privoxy/CA
+#
+# 7.2. ca-cert-file
+# ==================
+#
+# Specifies:
+#
+# The CA certificate file in ".crt" format.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# cacert.crt
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the name of the CA certificate file
+# in ".crt" format.
+#
+# The file is used by Privoxy to generate website certificates
+# when https inspection is enabled with the https-inspection
+# action.
+#
+# Privoxy clients should import the certificate so that they can
+# validate the generated certificates.
+#
+# The file can be generated with: openssl req -new -x509
+# -extensions v3_ca -keyout cakey.pem -out cacert.crt -days 3650
+#
+# Example:
+#
+# ca-cert-file root.crt
+#
+#ca-cert-file cacert.crt
+#
+# 7.3. ca-key-file
+# =================
+#
+# Specifies:
+#
+# The CA key file in ".pem" format.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# cacert.pem
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the name of the CA key file in ".pem"
+# format. The ca-cert-file section contains a command to
+# generate it.
+#
+# The CA key is used by Privoxy to sign generated certificates.
+#
+# Access to the key should be limited to Privoxy.
+#
+# Example:
+#
+# ca-key-file cakey.pem
+#
+#ca-key-file cakey.pem
+#
+# 7.4. ca-password
+# =================
+#
+# Specifies: