+# Sample Configuration File for Privoxy v3.0.19
+#
+# $Id: config,v 1.97 2011/11/19 15:20:23 fabiankeil Exp $
+#
+# Copyright (C) 2001-2011 Privoxy Developers http://www.privoxy.org/
+#
+####################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. LOCAL SET-UP DOCUMENTATION #
+# 2. CONFIGURATION AND LOG FILE LOCATIONS #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+####################################################################
+#
+#
+# I. INTRODUCTION
+# ===============
+#
+# This file holds Privoxy's main configuration. Privoxy detects
+# configuration changes automatically, so you don't have to restart
+# it unless you want to load a different configuration file.
+#
+# The configuration will be reloaded with the first request after
+# the change was done, this request itself will still use the old
+# configuration, though. In other words: it takes two requests before
+# you see the result of your changes. Requests that are dropped due
+# to ACL don't trigger reloads.
+#
+# When starting Privoxy on Unix systems, give the location of this
+# file as last argument. On Windows systems, Privoxy will look for
+# this file with the name 'config.txt' in the current working directory
+# of the Privoxy process.
+#
+#
+# II. FORMAT OF THE CONFIGURATION FILE
+# ====================================
+#
+# Configuration lines consist of an initial keyword followed by a
+# list of values, all separated by whitespace (any number of spaces
+# or tabs). For example,
+#
+# actionsfile default.action
+#
+# Indicates that the actionsfile is named 'default.action'.
+#
+# The '#' indicates a comment. Any part of a line following a '#'
+# is ignored, except if the '#' is preceded by a '\'.
+#
+# Thus, by placing a # at the start of an existing configuration
+# line, you can make it a comment and it will be treated as if it
+# weren't there. This is called "commenting out" an option and can
+# be useful. Removing the # again is called "uncommenting".
+#
+# Note that commenting out an option and leaving it at its default
+# are two completely different things! Most options behave very
+# differently when unset. See the "Effect if unset" explanation in
+# each option's description for details.
+#
+# Long lines can be continued on the next line by using a `\' as the
+# last character.
+#
+#
+#
+# 1. LOCAL SET-UP DOCUMENTATION
+# ==============================
+#
+# If you intend to operate Privoxy for more users than just yourself,
+# it might be a good idea to let them know how to reach you, what
+# you block and why you do that, your policies, etc.
+#
+#
+#
+# 1.1. user-manual
+# =================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# http://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is the single best source of information on
+# Privoxy, and is used for help links from some of the internal
+# CGI pages. The manual itself is normally packaged with the
+# binary distributions, so you probably want to set this to a
+# locally installed copy.
+#
+# Examples:
+#
+# The best all purpose solution is simply to put the full local
+# PATH to where the User Manual is located:
+#
+# user-manual /usr/share/doc/privoxy/user-manual
+#
+# The User Manual is then available to anyone with
+# access to Privoxy, by following the built-in URL:
+# http://config.privoxy.org/user-manual/ (or the shortcut:
+# http://p.p/user-manual/).
+#
+# If the documentation is not on the local system, it can be
+# accessed from a remote server, as:
+#
+# user-manual http://example.com/privoxy/user-manual/
+#
+# WARNING!!!
+#
+# If set, this option should be the first option in the config
+# file, because it is used while the config file is being read.
+#
+#user-manual http://www.privoxy.org/user-manual/
+#
+#
+# 1.2. trust-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental trust
+# mechanism has been activated. (See trustfile below.)
+#
+# If you use the trust mechanism, it is a good idea to write
+# up some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
+#trust-info-url http://www.example.com/why_we_block.html
+#trust-info-url http://www.example.com/what_we_allow.html
+#
+#
+# 1.3. admin-address
+# ===================
+#
+# Specifies:
+#
+# An email address to reach the Privoxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+#admin-address privoxy-admin@example.com
+#
+#
+# 1.4. proxy-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+# This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+#
+#
+# 2. CONFIGURATION AND LOG FILE LOCATIONS
+# ========================================
+#
+# Privoxy can (and normally does) use a number of other files for
+# additional configuration, help and logging. This section of the
+# configuration file tells Privoxy where to find those other files.
+#
+# The user running Privoxy, must have read permission for all
+# configuration files, and write permission to any files that would
+# be modified, such as log files and actions files.
+#
+#
+#
+# 2.1. confdir
+# =============
+#
+# Specifies:
+#
+# The directory where the other configuration files are located.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+confdir .
+#
+#
+# 2.2. templdir
+# ==============
+#
+# Specifies:
+#
+# An alternative directory where the templates are loaded from.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# unset
+#
+# Effect if unset:
+#
+# The templates are assumed to be located in confdir/template.
+#
+# Notes:
+#
+# Privoxy's original templates are usually overwritten with each
+# update. Use this option to relocate customized templates that
+# should be kept. As template variables might change between
+# updates, you shouldn't expect templates to work with Privoxy
+# releases other than the one they were part of, though.
+#
+#templdir .
+#
+#
+# 2.3. logdir
+# ============
+#
+# Specifies:
+#
+# The directory where all logging takes place (i.e. where the
+# logfile is located).
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+logdir .
+#
+#
+# 2.4. actionsfile
+# =================
+#
+# Specifies:
+#
+# The actions file(s) to use
+#
+# Type of value:
+#
+# Complete file name, relative to confdir
+#
+# Default values:
+#
+# match-all.action # Actions that are applied to all sites and maybe overruled later on.
+#
+# default.action # Main actions file
+#
+# user.action # User customizations
+#
+# Effect if unset:
+#
+# No actions are taken at all. More or less neutral proxying.
+#
+# Notes:
+#
+# Multiple actionsfile lines are permitted, and are in fact
+# recommended!
+#
+# The default values are default.action, which is the "main"
+# actions file maintained by the developers, and user.action,
+# where you can make your personal additions.
+#
+# Actions files contain all the per site and per URL configuration
+# for ad blocking, cookie management, privacy considerations,
+# etc. There is no point in using Privoxy without at least one
+# actions file.
+#
+# Note that since Privoxy 3.0.7, the complete filename, including
+# the ".action" extension has to be specified. The syntax change
+# was necessary to be consistent with the other file options and
+# to allow previously forbidden characters.
+#
+actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
+actionsfile default.action # Main actions file
+actionsfile user.action # User customizations
+#
+#
+# 2.5. filterfile
+# ================
+#
+# Specifies:
+#
+# The filter file(s) to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.filter (Unix) or default.filter.txt (Windows)
+#
+# Effect if unset:
+#
+# No textual content filtering takes place, i.e. all +filter{name}
+# actions in the actions files are turned neutral.
+#
+# Notes:
+#
+# Multiple filterfile lines are permitted.
+#
+# The filter files contain content modification rules that use
+# regular expressions. These rules permit powerful changes on the
+# content of Web pages, and optionally the headers as well, e.g.,
+# you could try to disable your favorite JavaScript annoyances,
+# re-write the actual displayed text, or just have some fun
+# playing buzzword bingo with web pages.
+#
+# The +filter{name} actions rely on the relevant filter (name)
+# to be defined in a filter file!
+#
+# A pre-defined filter file called default.filter that contains a
+# number of useful filters for common problems is included in the
+# distribution. See the section on the filter action for a list.
+#
+# It is recommended to place any locally adapted filters into a
+# separate file, such as user.filter.
+#
+filterfile default.filter
+filterfile user.filter # User customizations
+#
+#
+# 2.6. logfile
+# =============
+#
+# Specifies:
+#
+# The log file to use
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: logfile (Unix) or
+# privoxy.log (Windows).
+#
+# Effect if unset:
+#
+# No logfile is written.
+#
+# Notes:
+#
+# The logfile is where all logging and error messages are
+# written. The level of detail and number of messages are set with
+# the debug option (see below). The logfile can be useful for
+# tracking down a problem with Privoxy (e.g., it's not blocking
+# an ad you think it should block) and it can help you to monitor
+# what your browser is doing.
+#
+# Depending on the debug options below, the logfile may be a
+# privacy risk if third parties can get access to it. As most
+# users will never look at it, Privoxy 3.0.7 and later only log
+# fatal errors by default.
+#
+# For most troubleshooting purposes, you will have to change that,
+# please refer to the debugging section for details.
+#
+# Your logfile will grow indefinitely, and you will probably
+# want to periodically remove it. On Unix systems, you can do
+# this with a cron job (see "man cron"). For Red Hat based Linux
+# distributions, a logrotate script has been included.
+#
+# Any log files must be writable by whatever user Privoxy is
+# being run as (on Unix, default user id is "privoxy").
+#
+logfile logfile
+#
+#
+# 2.7. trustfile
+# ===============
+#
+# Specifies:
+#
+# The name of the trust file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: trust (Unix) or trust.txt
+# (Windows)
+#
+# Effect if unset:
+#
+# The entire trust mechanism is disabled.
+#
+# Notes:
+#
+# The trust mechanism is an experimental feature for building
+# white-lists and should be used with care. It is NOT recommended
+# for the casual user.
+#
+# If you specify a trust file, Privoxy will only allow access to
+# sites that are specified in the trustfile. Sites can be listed
+# in one of two ways:
+#
+# Prepending a ~ character limits access to this site only (and
+# any sub-paths within this site), e.g. ~www.example.com allows
+# access to ~www.example.com/ features/news.html, etc.
+#
+# Or, you can designate sites as trusted referrers, by prepending
+# the name with a + character. The effect is that access to
+# untrusted sites will be granted -- but only if a link from
+# this trusted referrer was used to get there. The link target
+# will then be added to the "trustfile" so that future, direct
+# accesses will be granted. Sites added via this mechanism do
+# not become trusted referrers themselves (i.e. they are added
+# with a ~ designation). There is a limit of 512 such entries,
+# after which new entries will not be made.
+#
+# If you use the + operator in the trust file, it may grow
+# considerably over time.
+#
+# It is recommended that Privoxy be compiled with the
+# --disable-force, --disable-toggle and --disable-editor options,
+# if this feature is to be used.
+#
+# Possible applications include limiting Internet access for
+# children.
+#
+#trustfile trust
+#
+#
+# 3. DEBUGGING
+# =============
+#
+# These options are mainly useful when tracing a problem. Note that
+# you might also want to invoke Privoxy with the --no-daemon command
+# line option when debugging.
+#
+#
+#
+# 3.1. debug
+# ===========
+#
+# Specifies:
+#
+# Key values that determine what information gets logged.
+#
+# Type of value:
+#
+# Integer values
+#
+# Default value:
+#
+# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
+#
+# Effect if unset:
+#
+# Default value is used (see above).
+#
+# Notes:
+#
+# The available debug levels are:
+#
+# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data written to the network
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filters
+# debug 128 # debug redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
+# debug 32768 # log all data read from the network
+#
+#
+# To select multiple debug levels, you can either add them or
+# use multiple debug lines.
+#
+# A debug level of 1 is informative because it will show you each
+# request as it happens. 1, 1024, 4096 and 8192 are recommended
+# so that you will notice when things go wrong. The other levels
+# are probably only of interest if you are hunting down a specific
+# problem. They can produce a hell of an output (especially 16).
+#
+# Privoxy used to ship with the debug levels recommended above
+# enabled by default, but due to privacy concerns 3.0.7 and later
+# are configured to only log fatal errors.
+#
+# If you are used to the more verbose settings, simply enable
+# the debug lines below again.
+#
+# If you want to use pure CLF (Common Log Format), you should set
+# "debug 512" ONLY and not enable anything else.
+#
+# Privoxy has a hard-coded limit for the length of log messages. If
+# it's reached, messages are logged truncated and marked with
+# "... [too long, truncated]".
+#
+# Please don't file any support requests without trying to
+# reproduce the problem with increased debug level first. Once
+# you read the log messages, you may even be able to solve the
+# problem on your own.
+#
+#debug 1 # Log the destination for each request Privoxy let through.
+#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+#debug 4096 # Startup banner and warnings
+#debug 8192 # Non-fatal errors
+#
+#
+# 3.2. single-threaded
+# =====================
+#
+# Specifies:
+#
+# Whether to run only one server thread.
+#
+# Type of value:
+#
+# None
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Multi-threaded (or, where unavailable: forked) operation,
+# i.e. the ability to serve multiple requests simultaneously.
+#
+# Notes:
+#
+# This option is only there for debugging purposes. It will
+# drastically reduce performance.
+#
+#single-threaded
+#
+#
+# 3.3. hostname
+# ==============
+#
+# Specifies:
+#
+# The hostname shown on the CGI pages.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# The hostname provided by the operating system is used.
+#
+# Notes:
+#
+# On some misconfigured systems resolving the hostname fails or
+# takes too much time and slows Privoxy down. Setting a fixed
+# hostname works around the problem.
+#
+# In other circumstances it might be desirable to show a hostname
+# other than the one returned by the operating system. For example
+# if the system has several different hostnames and you don't
+# want to use the first one.
+#
+# Note that Privoxy does not validate the specified hostname value.
+#
+#hostname hostname.example.org
+#
+#
+# 4. ACCESS CONTROL AND SECURITY
+# ===============================
+#
+# This section of the config file controls the security-relevant
+# aspects of Privoxy's configuration.
+#
+#
+#
+# 4.1. listen-address
+# ====================
+#
+# Specifies:
+#
+# The address and TCP port on which Privoxy will listen for
+# client requests.
+#
+# Type of value:
+#
+# [IP-Address]:Port
+#
+# [Hostname]:Port
+#
+# Default value:
+#
+# 127.0.0.1:8118
+#
+# Effect if unset:
+#
+# Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is suitable
+# and recommended for home users who run Privoxy on the same
+# machine as their browser.
+#
+# Notes:
+#
+# You will need to configure your browser(s) to this proxy address
+# and port.
+#
+# If you already have another service running on port 8118, or
+# if you want to serve requests from other machines (e.g. on your
+# local network) as well, you will need to override the default.
+#
+# You can use this statement multiple times to make Privoxy listen
+# on more ports or more IP addresses. Suitable if your operating
+# system does not support sharing IPv6 and IPv4 protocols on the
+# same socket.
+#
+# If a hostname is used instead of an IP address, Privoxy will
+# try to resolve it to an IP address and if there are multiple,
+# use the first one returned.
+#
+# If the address for the hostname isn't already known on the
+# system (for example because it's in /etc/hostname), this may
+# result in DNS traffic.
+#
+# If the specified address isn't available on the system, or if
+# the hostname can't be resolved, Privoxy will fail to start.
+#
+# IPv6 addresses containing colons have to be quoted by
+# brackets. They can only be used if Privoxy has been compiled
+# with IPv6 support. If you aren't sure if your version supports
+# it, have a look at http://config.privoxy.org/ show-status.
+#
+# Some operating systems will prefer IPv6 to IPv4 addresses even if
+# the system has no IPv6 connectivity which is usually not expected
+# by the user. Some even rely on DNS to resolve localhost which
+# mean the "localhost" address used may not actually be local.
+#
+# It is therefore recommended to explicitly configure the intended
+# IP address instead of relying on the operating system, unless
+# there's a strong reason not to.
+#
+# If you leave out the address, Privoxy will bind to all IPv4
+# interfaces (addresses) on your machine and may become reachable
+# from the Internet and/ or the local network. Be aware that
+# some GNU/Linux distributions modify that behaviour without
+# updating the documentation. Check for non-standard patches if
+# your Privoxyversion behaves differently.
+#
+# If you configure Privoxyto be reachable from the network,
+# consider using access control lists (ACL's, see below), and/or
+# a firewall.
+#
+# If you open Privoxy to untrusted users, you will also
+# want to make sure that the following actions are disabled:
+# enable-edit-actions and enable-remote-toggle
+#
+# With the exception noted above, listening on multiple addresses
+# is currently not supported by Privoxy directly. It can be done
+# on most operating systems by letting a packet filter redirect
+# request for certain addresses to Privoxy, though.
+#
+# Example:
+#
+# Suppose you are running Privoxy on a machine which has the
+# address 192.168.0.1 on your local private network (192.168.0.0)
+# and has another outside connection with a different address. You
+# want it to serve requests from inside only:
+#
+# listen-address 192.168.0.1:8118
+#
+# Suppose you are running Privoxy on an IPv6-capable machine and
+# you want it to listen on the IPv6 address of the loopback device:
+#
+# listen-address [::1]:8118
+#
+listen-address 127.0.0.1:8118
+#
+#
+# 4.2. toggle
+# ============
+#
+# Specifies:
+#
+# Initial state of "toggle" status
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Act as if toggled on
+#
+# Notes:
+#
+# If set to 0, Privoxy will start in "toggled off" mode,
+# i.e. mostly behave like a normal, content-neutral proxy
+# with both ad blocking and content filtering disabled. See
+# enable-remote-toggle below.
+#
+# The windows version will only display the toggle icon in the
+# system tray if this option is present.
+#
+toggle 1
+#
+#
+# 4.3. enable-remote-toggle
+# ==========================
+#
+# Specifies:
+#
+# Whether or not the web-based toggle feature may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based toggle feature is disabled.
+#
+# Notes:
+#
+# When toggled off, Privoxy mostly acts like a normal,
+# content-neutral proxy, i.e. doesn't block ads or filter content.
+#
+# Access to the toggle feature can not be controlled separately by
+# "ACLs" or HTTP authentication, so that everybody who can access
+# Privoxy (see "ACLs" and listen-address above) can toggle it
+# for all users. So this option is not recommended for multi-user
+# environments with untrusted users.
+#
+# Note that malicious client side code (e.g Java) is also capable
+# of using this option.
+#
+# As a lot of Privoxy users don't read documentation, this feature
+# is disabled by default.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-remote-toggle 0
+#
+#
+# 4.4. enable-remote-http-toggle
+# ===============================
+#
+# Specifies:
+#
+# Whether or not Privoxy recognizes special HTTP headers to change
+# its behaviour.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores special HTTP headers.
+#
+# Notes:
+#
+# When toggled on, the client can change Privoxy's behaviour by
+# setting special HTTP headers. Currently the only supported
+# special header is "X-Filter: No", to disable filtering for
+# the ongoing request, even if it is enabled in one of the
+# action files.
+#
+# This feature is disabled by default. If you are using Privoxy in
+# a environment with trusted clients, you may enable this feature
+# at your discretion. Note that malicious client side code (e.g
+# Java) is also capable of using this feature.
+#
+# This option will be removed in future releases as it has been
+# obsoleted by the more general header taggers.
+#
+enable-remote-http-toggle 0
+#
+#
+# 4.5. enable-edit-actions
+# =========================
+#
+# Specifies:
+#
+# Whether or not the web-based actions file editor may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based actions file editor is disabled.
+#
+# Notes:
+#
+# Access to the editor can not be controlled separately by
+# "ACLs" or HTTP authentication, so that everybody who can access
+# Privoxy (see "ACLs" and listen-address above) can modify its
+# configuration for all users.
+#
+# This option is not recommended for environments with untrusted
+# users and as a lot of Privoxy users don't read documentation,
+# this feature is disabled by default.
+#
+# Note that malicious client side code (e.g Java) is also capable
+# of using the actions editor and you shouldn't enable this
+# options unless you understand the consequences and are sure
+# your browser is configured correctly.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-edit-actions 0
+#
+#
+# 4.6. enforce-blocks
+# ====================
+#
+# Specifies:
+#
+# Whether the user is allowed to ignore blocks and can "go there
+# anyway".
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Blocks are not enforced.
+#
+# Notes:
+#
+# Privoxy is mainly used to block and filter requests as a service
+# to the user, for example to block ads and other junk that clogs
+# the pipes. Privoxy's configuration isn't perfect and sometimes
+# innocent pages are blocked. In this situation it makes sense to
+# allow the user to enforce the request and have Privoxy ignore
+# the block.
+#
+# In the default configuration Privoxy's "Blocked" page contains
+# a "go there anyway" link to adds a special string (the force
+# prefix) to the request URL. If that link is used, Privoxy
+# will detect the force prefix, remove it again and let the
+# request pass.
+#
+# Of course Privoxy can also be used to enforce a network
+# policy. In that case the user obviously should not be able to
+# bypass any blocks, and that's what the "enforce-blocks" option
+# is for. If it's enabled, Privoxy hides the "go there anyway"
+# link. If the user adds the force prefix by hand, it will not
+# be accepted and the circumvention attempt is logged.
+#
+# Examples:
+#
+# enforce-blocks 1
+#
+enforce-blocks 0
+#
+#
+# 4.7. ACLs: permit-access and deny-access
+# =========================================
+#
+# Specifies:
+#
+# Who can access what.
+#
+# Type of value:
+#
+# src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]]
+#
+# Where src_addr and dst_addr are IPv4 addresses in dotted
+# decimal notation or valid DNS names, port is a port number, and
+# src_masklen and dst_masklen are subnet masks in CIDR notation,
+# i.e. integer values from 2 to 30 representing the length
+# (in bits) of the network address. The masks and the whole
+# destination part are optional.
+#
+# If your system implements RFC 3493, then src_addr and dst_addr
+# can be IPv6 addresses delimeted by brackets, port can be a
+# number or a service name, and src_masklen and dst_masklen can
+# be a number from 0 to 128.
+#
+# Default value:
+#
+# Unset
+#
+# If no port is specified, any port will match. If no src_masklen
+# or src_masklen is given, the complete IP address has to match
+# (i.e. 32 bits for IPv4 and 128 bits for IPv6).
+#
+# Effect if unset:
+#
+# Don't restrict access further than implied by listen-address