+
+#############################################################################
+# Set make command correctly
+#############################################################################
+@SET_MAKE@
+
+#############################################################################
+# Version number (for RPM)
+#############################################################################
+
+VERSION_MAJOR = @VERSION_MAJOR@
+VERSION_MINOR = @VERSION_MINOR@
+VERSION_POINT = @VERSION_POINT@
+CODE_STATUS = @CODE_STATUS@
+VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
+# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
+RPM_VERSION = $(VERSION)
+RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
+
+
+#############################################################################
+# Directories for "make install"
+#############################################################################
+
+DEST = @prefix@
+CONFDEST = @prefix@@sysconfdir@
+SBIN_DEST = @prefix@@sbindir@
+MAN_DEST = @prefix@@mandir@
+
+
+#############################################################################
+# Build tools
+#############################################################################
+
+PROGRAM = privoxy@EXEEXT@
+CC = @CC@
+ECHO = echo
+GZIP_PROG = gzip
+#INSTALL = cp -f
+INSTALL = @INSTALL@
+INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
+INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
+INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
+LD = @CC@
+RM = rm -f
+STRIP_PROG = strip
+SED = sed
+CAT = cat
+RPM = rpm
+MV = mv
+TAR = tar
+LN = ln
+WDUMP = @WDUMP@ -dump
+JADEBIN = @JADEBIN@
+DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
+DB2HTML = @DB2HTML@
+DKPREFIX = @DKPREFIX@
+MAN2HTML = @MAN2HTML@
+G2H_CMD = groff -mandoc -Thtml
+TARGET_OS = @host@
+
+#User Group paras
+USER = @USER@
+GROUP = @GROUP@
+
+# Program to do LF->CRLF
+#
+# The sed version should be the most portable, but it doesn't for for me,
+# the other two do. FIXME.
+# - Jon
+#DOSFILTER = $(SED) -e $$'s,$$,\r,'
+#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
+DOSFILTER = perl -p -e 's/\n/\r\n/'
+
+#############################################################################
+# Setup for make distribution rh and suse for now
+#############################################################################
+
+TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
+RPM_BASE = @RPM_BASE@
+
+#############################################################################
+# Filenames and libraries
+#############################################################################
+
+C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
+ urlmatch.c
+
+C_OBJS = $(C_SRC:.c=.@OBJEXT@)
+C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
+
+CONFIG_FILES = config trust \
+ default.action \
+ basic.action intermediate.action advanced.action \
+ default.filter \
+ templates/*
+
+DOC_FILES = AUTHORS LICENSE README ChangeLog doc/text/* privoxy.1
+
+W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
+W32_FILES = @WIN_ONLY@w32.res
+W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
+W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
+W32_INIS = @WIN_ONLY@config.txt trust.txt
+
+PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
+PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
+PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
+
+PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
+PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
+PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
+
+# No REGEX (Either because dynamically linked pcreposix, or no regex at all):
+REGEX_SRC =
+# GNU REGEX:
+@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
+# PCRE REGEX:
+@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
+
+REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
+REGEX_HDRS = $(REGEX_SRC:.c=.h)
+
+# Dependencies introduced by #include "project.h".
+PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
+
+# Socket libraries for platforms that need them explicitly defined
+SOCKET_LIB = @SOCKET_LIB@
+
+# PThreads library, if needed.
+PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
+
+SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
+OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
+HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
+LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
+
+
+#############################################################################
+# Compiler switches
+#############################################################################
+
+# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
+# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
+# Win32 GUI build.
+# The flag "-pthread" is required if using Pthreads under Linux (and
+# possibly other OSs).
+SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
+
+# Add your flags here
+OTHER_CFLAGS =
+
+CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
+ @STATIC_PCRE_ONLY@ -Ipcre
+
+LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+
+
+#############################################################################
+# Build section.
+#
+# There should NOT be any targets above this line.
+#############################################################################
+all: $(PROGRAM)
+
+
+#############################################################################
+# Phony targets
+#############################################################################
+.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
+suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
+install
+
+
+#############################################################################
+# Define this explicitly because Solaris is broken!
+#############################################################################
+%.o: %.c
+ $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+
+#############################################################################
+# Win32 config files
+#############################################################################
+
+inifiles: $(W32_INIS)
+
+config.txt: config
+ $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
+ -e 's!\jarfile jarfile!jarfile jar.log!' \
+ -e 's!\logfile logfile!logfile privoxy.log!' \
+ -e 's!#Win32-only: !!' \
+ < $< | \
+ $(DOSFILTER) > $@
+ # LF to CRLF in default.action
+ $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
+ # LF to CRLF in default.filter
+ $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
+
+trust.txt: trust
+ $(DOSFILTER) < $< > $@
+
+re_filterfile.txt: re_filterfile
+ $(DOSFILTER) < $< > $@
+
+
+#############################################################################
+# redhat distribution alpha and x86
+#############################################################################
+
+redhat-dist:
+ for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
+ if [ ! -w $(RPM_BASE)/$$dir ]; then \
+ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
+ $(ECHO) "Or add a suitable path to .rpmmacros like."; \
+ $(ECHO) "%_topdir /home/foo/rpm-build"; \
+ exit 1; \
+ fi; \
+ done; \
+
+ $(MAKE) clobber
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+ privoxy-rh.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-rh.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi
+
+ $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
+ $(RPM) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+#
+# anonymously ncftps the rpms to sourceforge
+#
+redhat-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+# better should use `arch` here instead of ix86 to support other platforms too
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+ # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+
+#############################################################################
+# generic distribution
+#############################################################################
+
+gen-dist:
+ @$(ECHO) ""
+ @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
+ @$(ECHO) ""
+ $(MAKE) $(PROGRAM)
+ $(STRIP_PROG) $(PROGRAM)
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+# add program
+ cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)
+# add config files
+ for foo in $(CONFIG_FILES); do \
+ cd .. && $(TAR) --exclude "CVS" --exclude "#*" --exclude ".#*" --exclude ".cvsignore" -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo; \
+ done;
+# add documentation
+ for foo in $(DOC_FILES); do \
+ cd .. && $(TAR) --exclude "CVS" --exclude "#*" --exclude ".#*" --exclude ".cvsignore" -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo; \
+ done;
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Distribution with binary created.
+
+# anonymously ncftps the tarball to sourceforge
+gen-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# use with care
+gen-clean:
+ $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
+
+#############################################################################
+# solaris distribution
+#############################################################################
+solaris-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the tarball to sourceforge
+solaris-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+solaris-clean: gen-clean
+ @$(ECHO) Done.
+
+#############################################################################
+# hpux distribution
+#############################################################################
+hpux-dist:
+ @$(ECHO) coming soon.
+hpux-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# debian distribution
+#############################################################################
+debian-dist:
+ @$(ECHO) coming soon.
+debian-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# macosx distribution
+#############################################################################
+macosx-dist:
+ @$(ECHO) coming soon.
+macosx-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# amiga distribution
+#############################################################################
+amiga-dist:
+ @$(ECHO) coming soon.
+amiga-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# freebsd distribution
+#############################################################################
+freebsd-dist:
+ @$(ECHO) coming soon.
+freebsd-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# suse distribution. works fine. no need to be root.
+#############################################################################
+suse-dist:
+ for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
+ if [ ! -w $(RPM_BASE)/$$dir ]; then \
+ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
+ $(ECHO) "Or add a suitable path to .rpmmacros like."; \
+ $(ECHO) "%_topdir /home/foo/rpm-build"; \
+ exit 1; \
+ fi; \
+ done; \
+
+ $(MAKE) clobber
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSIO)/g' \
+ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+ privoxy-suse.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-suse.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi
+
+ $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
+ $(RPM) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+#
+# anonymously ncftps the rpms to sourceforge
+#
+suse-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+# better should use `arch` here instead of ix86 to support other platforms too
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# handle with care. use with root.
+suse-clean:
+ rpm -e junkbuster-suse || true
+ rm -rf /etc/junkbuster
+ rm -rf /etc/rc.d/junkbuster*
+ rm -rf /var/run/junkbuster.pid
+ rm -rf /var/log/junkbuster
+ rm -f /etc/init.d/junkbuster
+ rm -f /usr/sbin/junkbuster
+ rm -f /usr/sbin/rcjunkbuster
+ rm -f /usr/share/man/man1/junkbuster.1.gz
+ rpm -e privoxy-suse || true
+ rm -rf /etc/privoxy
+ rm -rf /etc/rc.d/privoxy*
+ rm -rf /var/run/privoxy.pid
+ rm -rf /var/log/privoxy
+ rm -f /etc/init.d/privoxy
+ rm -f /usr/sbin/privoxy
+ rm -f /usr/sbin/rcprivoxy
+ rm -f /usr/share/man/man1/privoxy.1.gz
+
+#############################################################################
+# Windows distribution
+#############################################################################
+win-dist:
+ $(ECHO) Not implemented.
+
+
+#############################################################################
+# Tarball distribution
+#############################################################################
+tarball-dist: clobber
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+ cd .. && $(TAR) --exclude "CVS" --exclude "#*" --exclude ".#*" --exclude ".cvsignore" -cvhzf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz privoxy-$(VERSION)-$(CODE_STATUS)
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ @$(ECHO) Tarball (without any binary) created.
+
+# anonymously ncftps the tarball to sourceforge
+tarball-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# handle with care
+tarball-clean:
+ $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+
+#############################################################################
+#
+# Documentation
+#
+# converts doc/source/*.sgml into html, text and man pages
+#
+#############################################################################
+dok: doc/source/ldpOK.dsl man2html-swa
+ mkdir -p doc/text doc/man
+# user manual
+ rm -rf doc/webserver/user-manual
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
+## developer manual
+ rm -rf doc/webserver/developer-manual
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
+## faq
+ rm -rf doc/webserver/faq
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl faq.sgml && mv faq ../webserver
+ cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
+## kludge to force recreation on next run. Rodgrigo?
+ @rm -f doc/source/ldpOK.dsl
+
+man2html-swa:
+ mkdir -p doc/webserver/man-page
+ if [ "$(MAN2HTML)" != "false" ]; then \
+ $(ECHO) "<html><head><title>Privoxy|Doc/Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
+ man ./privoxy.1 | $(MAN2HTML) -bare \
+ >> doc/webserver/man-page/privoxy-man-page.html; \
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi
+
+redhat-dok: doc/source/ldpOK.dsl man2html
+ mkdir -p doc/text doc/man doc/source/user-manual \
+ doc/source/developer-manual doc/source/faq
+## user manual
+ rm -rf doc/webserver/user-manual
+ cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
+ mv user-manual ../webserver
+ cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
+ $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
+ user-manual
+## developer manual
+ rm -rf doc/webserver/developer-manual
+ cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
+ cd .. && mv developer-manual ../webserver
+ cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
+ $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
+ developer-manual
+## faq
+ rm -rf doc/webserver/faq
+ cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
+ cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
+ tmp.html > ../text/faq.txt && rm -rf tmp.html faq
+## kludge to force recreation on next run. Rodgrigo?
+ @rm -f doc/source/ldpOK.dsl
+
+
+doc/source/ldpOK.dsl:
+ if [ "$(DKPREFIX)" != "none" ]; then \
+ sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
+ else \
+ cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
+ fi
+
+# For those with man2html ala RH7's.
+man2html:
+ mkdir -p doc/webserver/man-page
+ if [ "$(MAN2HTML)" != "false" ]; then \
+ $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \
+ perl -pi -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi
+
+# Otherwise we get plain groff conversion.
+groff2html:
+ $(G2H_CMD) ./privoxy.1 > doc/webserver/man-page/privoxy-man-page.html
+
+
+#############################################################################
+#
+# Webserver
+#
+# moves dokumentation to webserver
+#
+#############################################################################
+webserver:
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) You have run make dok/redhat-dok before, right?
+ @$(ECHO) Note that this command scps all stuff to the webserver,
+ @$(ECHO) it will not remove obsolete documents.
+ @$(ECHO) -------------------------------------------------------
+ find doc/webserver -type f -exec chmod 664 {} \;
+# not sure if we need next line.swa.
+ chmod 775 doc/webserver/redirect.php
+ find doc/webserver -type d -exec chmod a+rx {} \;
+ cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
+
+webquick:
+ find doc/webserver -type f -exec chmod 664 {} \;
+# not sure if we need next line.swa.
+ chmod 775 doc/webserver/redirect.php
+ find doc/webserver -type d -exec chmod a+rx {} \;
+ cd doc/webserver/submit && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/submit
+
+
+#############################################################################
+# Source file dependencies
+#############################################################################
+
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
+encode.@OBJEXT@: encode.c encode.h config.h
+errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
+jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
+killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
+miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
+urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
+
+# GNU regex
+gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
+
+# PCRS
+pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+
+# PCRE
+pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
+pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
+pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
+
+# An auxiliary program makes the PCRE default character table source
+
+pcre/chartables.c: pcre/dftables@EXEEXT@
+ pcre/dftables@EXEEXT@ >pcre/chartables.c
+
+pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
+ $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
+
+# Win32
+w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
+w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
+win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
+
+w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
+ windres -D__MINGW32__=0.2 -O coff -i $< -o $@
+
+# AmigaOS
+@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
+@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
+@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
+
+
+$(PROGRAM): $(OBJS) $(W32_FILES)
+ $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
+
+clean:
+ $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) junkbuster config.log
+
+clobber: clean
+ $(RM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` `find . -name TAGS` config.status config.h.in config.log junkbuster.log privoxy.log config.cache *~ *.tar.gz configure
+
+tags: $(SRCS) $(HDRS)
+ etags $(SRCS) $(HDRS)
+
+install: all
+ #
+ # FIXME: This is a dirty hack to have an install target
+ # that works at least for some setups. This needs
+ # to be fixed!
+ #
+ $(STRIP_PROG) $(PROGRAM)
+ $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
+ $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
+ $(INSTALL) $(INSTALL_D) $(DEST)/templates
+ $(INSTALL) $(INSTALL_D) $(CONFDEST)
+ $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
+ if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi
+ $(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates
+ $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
+ # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
+ # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
+ $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
+
+
+#############################################################################
+
+## Local Variables:
+## tab-width: 3
+## end:
+