# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.1 2001/12/01 11:22:57 jongfoster Exp $
+# $Id: GNUmakefile.in,v 1.177 2009/01/13 16:44:32 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 the SourceForge
-# IJBSWA team. http://ijbswa.sourceforge.net
+# Written by and Copyright (C) 2001 - 2008 the SourceForge
+# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
# by and Copyright (C) 1997 Anonymous Coders and
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
-# $Log: GNUmakefile.in,v $
-# Revision 1.1 2001/12/01 11:22:57 jongfoster
-# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-# make break in a more obvious way.
-# Adding .PHONY section.
-#
-# Revision 1.40 2001/12/01 00:24:11 jongfoster
-# Renaming various config files
-# Fixing CR->CRLF under Win32 (I hope)
-#
-# Revision 1.39 2001/11/06 12:07:30 steudten
-# Add --clean for building rpm in target redhat-dist.
-#
-# Revision 1.38 2001/11/05 21:35:23 steudten
-# Complete rewrite for the 'redhat-dist' target.
-# Checks for writeable RPM build directories for calling user.
-# So you must not be root, just set the modes to 1777 to
-# build a RH package.
-# Fix the upload-target to be arch independant.
-# Add target for 'solaris-dist' - coming soon.
-#
-# Revision 1.37 2001/11/01 00:52:04 hal9
-# Redhat-upload stuff per Stefan.
-#
-# Revision 1.36 2001/10/31 19:26:13 swa
-# automate process of uploading new releases
-# to sf.
-#
-# Revision 1.35 2001/10/15 22:14:59 joergs
-# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
-# the general CFLAGS already.
-#
-# Revision 1.34 2001/10/15 18:28:06 steudten
-# remove config.cache for target clobber.
-# Cleanup make dist for RH and S.u.S.E.
-#
-# Revision 1.33 2001/10/10 12:43:33 oes
-# Added ugly hack to make install target work at least for some setups.
-#
-# Revision 1.32 2001/10/09 22:38:19 jongfoster
-# Correcting actionsfile filename for Win32 INI build
-#
-# Revision 1.31 2001/09/23 10:13:48 swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30 2001/09/19 17:55:49 oes
-# Fixed CFLAGS
-#
-# Revision 1.29 2001/09/16 17:34:27 jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28 2001/09/13 15:19:08 swa
-# we want text files as well.
-#
-# Revision 1.27 2001/09/13 13:11:37 steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26 2001/09/12 23:44:54 david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25 2001/09/12 22:55:45 joergs
-# AmigaOS support added.
-#
-# Revision 1.24 2001/09/12 17:28:59 david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23 2001/09/12 16:28:42 swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22 2001/09/10 16:31:23 swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21 2001/09/10 11:12:49 oes
-# Turning on -Wall
-#
-# Revision 1.20 2001/08/02 22:04:29 jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19 2001/07/30 22:14:03 jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18 2001/07/29 17:09:17 jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-# which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17 2001/07/28 16:44:54 oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16 2001/07/15 19:45:33 jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15 2001/07/13 13:48:07 oes
-# - Moved STATIC #define for pcre to (ac)config.h
-# - Made -Ipcre depandant on static pcre compilation to
-# avoid version conflicts
-# - Included compilation and depandancies for new deanimate.c
-# - Made changes to the pcre/pcreposix/pcrs build process
-# as required by the new library autodetection in
-# configure.in
-#
-# Revision 1.14 2001/07/01 16:27:44 oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13 2001/06/29 13:18:36 oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12 2001/06/12 17:15:56 swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
-#
-# Revision 1.11 2001/06/11 11:26:35 sarantis
-# RPM version should be the same as ijbswa version. The rpm release is
-# specified in the specfile.
-#
-# Revision 1.10 2001/06/07 17:27:45 swa
-# added suse build section
-#
-# Revision 1.9 2001/06/04 18:31:58 swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.8 2001/06/04 10:44:57 swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-# Revision 1.7 2001/06/03 17:09:09 swa
-# swa for oes: reversed my earlier change
-#
-# Revision 1.6 2001/06/03 17:07:27 swa
-# swa for oes
-#
-# Revision 1.5 2001/06/03 13:57:26 swa
-# compile cgi.c (for andreas' GUI)
-#
-# Revision 1.4 2001/05/31 21:18:45 jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
-#
-# Revision 1.3 2001/05/29 20:02:48 joergs
-# Changes for AmigaOS added.
-#
-# Revision 1.2 2001/05/17 22:23:23 oes
-# - Added auto-generation of CRLFs for Win32 config files
-# - Added comment-prefix to all Win32-only options in the config file
-# and provided auto stripping of this prefix for the Win32 platform by make
-#
-# Revision 1.1.1.1 2001/05/15 13:59:00 oes
-# Initial import of version 2.9.3 source tree
-#
-#
+
+#############################################################################
+# Set make command correctly
+#############################################################################
+@SET_MAKE@
#############################################################################
# Version number (for RPM)
VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
VERSION_POINT = @VERSION_POINT@
+CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = 2
+RPM_PACKAGEV = ""
+SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
#############################################################################
-# Directories for "make install"
+# "make install" directories and variables
#############################################################################
-DEST = @sysconfdir@/junkbuster
-SBIN_DEST = @sbindir@
-MAN_DEST = @mandir@
-
+#User Group paras
+USER = @USER@
+GROUP = @GROUP@
+
+datarootdir = @datarootdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+CONF_BASE = @sysconfdir@
+SBIN_DEST = @sbindir@
+MAN_DIR = @mandir@
+MAN_DEST = $(MAN_DIR)/man1
+SHARE_DEST = @datadir@
+DOC_DEST = $(SHARE_DEST)/doc/privoxy
+VAR_DEST = @localstatedir@
+LOGS_DEST = $(VAR_DEST)/log/privoxy
+PIDS_DEST = $(VAR_DEST)/run
+
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# by the target rule CONF_DEST
+#
+# also if the $prefix is /usr/local and there is no
+# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
+# instead in this situation
+#
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# changes this to /var for storing the logs and pidfile
+
+# used in source dir only, the install goes to $share_dest/doc/privoxy
+DOK_WEB = doc/webserver/
+
+# Install usage should be compatible with install-sh.
+INSTALL = @INSTALL@
+# Binaries
+BIN_MODE = 0755
+# Support files, docs, etc.
+RA_MODE = 0664
+# Directory
+DIR_MODE = 0755
+# Files daemon writes to.
+RWD_MODE = 0660
+INSTALL_P = -m $(BIN_MODE)
+INSTALL_T = -m $(RA_MODE)
+INSTALL_D = -m $(DIR_MODE) -d
+INSTALL_R = -m $(RWD_MODE)
+
+# install options for superuser install
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
#############################################################################
-PROGRAM = junkbuster@EXEEXT@
+PROGRAM = privoxy@EXEEXT@
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
-INSTALL = cp -f
+
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
+ID = id
LD = @CC@
RM = rm -f
+CP = cp -f
+RMDIR = rmdir
+MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
+GREP = grep
CAT = cat
RPM = rpm
-MV = mv
+RPMBUILD = rpmbuild
+MV = mv
TAR = tar
-MAKE = make
+LN = ln
+TOUCH = touch
+KILL = kill
+CHMOD = chmod
+CHOWN = chown
+CHGRP = chgrp
+GROUPS = groups
+WDUMP = @WDUMP@ -dump
+JADECAT = @JADECAT@
+JADEBIN = @JADEBIN@
+DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
+DB2HTML = @DB2HTML@
+MAN2HTML = @MAN2HTML@
+G2H_CMD = groff -mandoc -Thtml
+TARGET_OS = @host@
+PERL = perl
+DOC_DIR = doc/source
+DOC_TMP = $(DOC_DIR)/tmp
+DOC_STATUS = @DOC_STATUS@
# Program to do LF->CRLF
#
# - Jon
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
-DOSFILTER = perl -p -e 's/\n/\r\n/'
+DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
+CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
+#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
# Setup for make distribution rh and suse for now
#############################################################################
-TAR_ARCH = /tmp/ijbswa-$(RPM_VERSION).tar.gz
-RPM_BASE = /usr/src/redhat
+TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
+RPM_BASE = @RPM_BASE@
+
+#############################################################################
+# We include these files in our distributions
+#############################################################################
+CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
+# take care that no CVS .cvsignore or other crappy files
+# are included here
+# and escape every '#' in the find. doh.
+CONFIG_FILES = $(CONFIGS) \
+ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
+
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
+ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
+ `find doc/webserver/ -name "*.css"` \
+ privoxy.1
#############################################################################
# Filenames and libraries
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
- list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c
+ errlog.c filters.c gateway.c jbsockets.c jcc.c \
+ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
+ urlmatch.c
C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
+W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
-W32_INIS = @WIN_ONLY@config.txt trust.txt re_filterfile.txt
+W32_INIS = @WIN_ONLY@config.txt trust.txt
PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
-# No REGEX (Either because dynamically linked pcreposix, or no regex at all):
+# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
-# GNU REGEX:
-@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
-# PCRE REGEX:
-@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
+@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
REGEX_HDRS = $(REGEX_SRC:.c=.h)
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
@STATIC_PCRE_ONLY@ -Ipcre
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
#
# There should NOT be any targets above this line.
#############################################################################
-all: $(PROGRAM)
+all: $(PROGRAM) default.action
#############################################################################
# Phony targets
#############################################################################
.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok webserver clean clobber tags install
-
+suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
+install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
+PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Define this explicitly because Solaris is broken!
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+#############################################################################
+# Strip master copy comments from default.action:
+#############################################################################
+default.action: default.action.master
+ $(GREP) -v '^#MASTER#' $< > $@
+
#############################################################################
# Win32 config files
#############################################################################
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
- -e 's!\logfile logfile!logfile junkbuster.log!' \
- -e 's!\re_filterfile re_filterfile!re_filterfile re_filterfile.txt!' \
+ -e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
$(DOSFILTER) > $@
- # LF to CRLF in ijb.action
- $(DOSFILTER) <ijb.action >ijb.action.txt && mv ijb.action.txt ijb.action
+ # LF to CRLF in default.action
+ $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
+ # LF to CRLF in default.filter
+ $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
$(DOSFILTER) < $< > $@
-re_filterfile.txt: re_filterfile
- $(DOSFILTER) < $< > $@
+#############################################################################
+# Pre-dist check:
+#############################################################################
+dist-check:
+ @if [ -d CVS ]; then \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** WARNING ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
+ $(ECHO) "*** that you are trying to build a distribution ***"; \
+ $(ECHO) "*** package based on a checked out, not an ***"; \
+ $(ECHO) "*** exported copy of the source tree. Please ***"; \
+ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
+ $(ECHO) "*** developer manual. ***"; \
+ $(ECHO) "*** ***"; \
+ $(ECHO) "***************************************************"; \
+ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
+ $(ECHO) -n "really want to proceed: "; \
+ read answer; \
+ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
+ fi;
#############################################################################
-# redhat distribution alpha and x86
+# create tar.gz from CVS:
+# This make-target is usually called through 'create-archive'. If you
+# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
+# tar.gz with the current date in the name and as a releasenumber in the
+# spec-file. But the main usage is to run it as follows (Red Hat example):
+# make SNAPVERSION=1.6x create-snapshot
+# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+#############################################################################
+create-snapshot:
+ @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
+ [ x"$$tag" = x"(none)" ] && tag=HEAD; \
+ echo "*** Creating package from $$tag!"; \
+ TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
+ cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
+ cd $$TMPDIR/current; \
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-rh.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-rh.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi;\
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-suse.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-suse.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi; \
+ $(RM) $$TMPFILE; \
+ cd $$TMPDIR/current; \
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" \
+ -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
+ $(RM) -rf $$TMPDIR
+ @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
+
+
#############################################################################
+# looks at the version of Makefile and exports a corresponding source-tree
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
+# Red Hat and one for SuSe (different spec-files)
+#############################################################################
+create-archive:
+ make SNAPVERSION=$(SNAPVERSION) create-snapshot
-redhat-dist:
- @for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
+#############################################################################
+# RPM specifice stuff (SuSE or Redhat, ..)
+#############################################################################
+rpm-stuff: dist-check clean clobber
+ for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
if [ ! -w $(RPM_BASE)/$$dir ]; then \
$(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- exit; \
+ $(ECHO) "Or add a suitable path to .rpmmacros like."; \
+ $(ECHO) "%_topdir /home/foo/rpm-build"; \
+ exit 1; \
fi; \
- done ; \
- $(MAKE) clobber; \
- [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH); \
- $(CAT) junkbuster-rh.spec | \
- $(SED) 's/^Version:.*/Version: $(RPM_VERSION)/g;s/^Release:.*/Release: $(RPM_PACKAGEV)/g' > abc && \
- $(MV) -f abc junkbuster-rh.spec; \
- $(CAT) junkbuster.init | \
- $(SED) 's#JB_PID=.*/\(.*\.pid\).*#JB_PID=@PID_FILE_PATH@/\1#g' > abc && \
- $(MV) -f abc junkbuster.init; \
- $(TAR) --exclude "CVS" --exclude "junkbuster-suse.spec" -cvzf $(TAR_ARCH) . ; \
- $(RPM) --clean -ta $(TAR_ARCH); \
- [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH)
+ done; \
+
+check-release:
+ @if [ "$(RPM_PACKAGEV)" = "" ]; then \
+ echo ; \
+ echo " ERROR: NO RPM_PACKAGEV VALUE"; \
+ echo " No value given for RPM_PACKAGEV. Please use:"; \
+ echo " make dist-upload RPM_PACKAGEV=release"; \
+ echo " where \"release\" is the release number you want to and"; \
+ echo " where \"dist\" is the name of the distro (redhat or suse)"; \
+ echo ; \
+ echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
+ echo ""; \
+ echo "ATTENTION: If your distribution use a specific tag on the"; \
+ echo " release field (like \"cl\" for Conectiva, and"; \
+ echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
+ echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
+ echo " Do it like you would do for a redhat package,"; \
+ echo " (i.e. just the number)."; \
+ echo ; \
+ exit 1; \
+ fi
+
+
+#############################################################################
+# Create Conectiva specfile from RedHat specfile
+#############################################################################
+conectiva-spec:
+ $(RM) privoxy-cl.spec
+ chmod a+x genclspec.sh
+ ./genclspec.sh
+
+#############################################################################
+# Conectiva distribution for x86
+#############################################################################
+conectiva-dist: rpm-stuff conectiva-spec
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+conectiva-upload: check-release
+ make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
+
+#############################################################################
+# redhat distribution alpha and x86
+#############################################################################
+redhat-dist: rpm-stuff
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+# For testing build issues only! Use redhat-dist for official releases.
+redhat-test:
+ echo $(CONFIG_FILES)
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -tb $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+ @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
-#
# anonymously ncftps the rpms to sourceforge
-#
-redhat-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+redhat-upload: check-release
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+
#############################################################################
-# sun solaris distribution
+# Creates a Red Hat sourcepackage from CVS (not from the current sources
+# on disk)
#############################################################################
-solaris-dist:
- @$(ECHO) coming soon.
+redhat-srpm:
+ make create-archive
+ $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
+
#############################################################################
-# suse distribution (need to be root to build)
+# suse distribution. works fine. no need to be root.
#############################################################################
+suse-dist: rpm-stuff
+# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+# privoxy-suse.spec > $$TMPFILE ; then \
+# $(MV) -f $$TMPFILE privoxy-suse.spec; \
+# else \
+# $(ECHO) "Could not set version info in specfile."; \
+# exit 1;\
+# fi
+
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-suse-dist:
- @make clobber
-# verify that i'm root needs to be done
- rm -f ../ijbswa.tar.gz
-# verify all version strings, FLAGS, etc. in the spec file
- cat junkbuster-suse.spec | sed 's/^Version:.*/Version: $(RPM_VERSION)/g' | sed 's/^Release:.*/Release: $(RPM_PACKAGEV)/g' > abc && mv -f abc junkbuster-suse.spec
- tar --exclude "CVS" --exclude "junkbuster-rh.spec" -cvzf ../ijbswa.tar.gz .
-# verify all files in their correct location needs to be done
-# never use buildroot to define the location inside the spec
-# file or suse will fuck up the build process.
- cd .. && rpm -ta --buildroot /tmp/xxx ijbswa.tar.gz
- chmod a+r /usr/src/packages/SRPMS/*
- chmod a+r /usr/src/packages/RPMS/i386/*
-
-#
# anonymously ncftps the rpms to sourceforge
-#
-suse-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/SRPMS/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+suse-upload: check-release
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/RPMS/*/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# handle with care. use with root.
suse-clean:
- rpm -e junkbuster-suse
- rm -rf /etc/junkbuster
- rm -rf /var/log/junkbuster
- rm -f /etc/init.d/junkbuster
- rm -f /usr/sbin/junkbuster
- rm -f /usr/sbin/rcjunkbuster
- rm -f /usr/share/man/man1/junkbuster.1.gz
+ $(RPM) -e junkbuster-suse || true
+ $(RM) -r /etc/junkbuster
+ $(RM) -r /etc/rc.d/junkbuster*
+ $(RM) -r /var/run/junkbuster.pid
+ $(RM) -r /var/log/junkbuster
+ $(RM) /etc/init.d/junkbuster
+ $(RM) /usr/sbin/junkbuster
+ $(RM) /usr/sbin/rcjunkbuster
+ $(RM) /usr/share/man/man1/junkbuster.1.gz
+ $(RPM) -e privoxy-suse || true
+ $(RM) -r /etc/privoxy
+ $(RM) -r /etc/rc.d/privoxy*
+ $(RM) -r /var/run/privoxy.pid
+ $(RM) -r /var/log/privoxy
+ $(RM) /etc/init.d/privoxy
+ $(RM) /usr/sbin/privoxy
+ $(RM) /usr/sbin/rcprivoxy
+ $(RM) /usr/share/man/man1/privoxy.1.gz
+
+#############################################################################
+# generic distribution
+#############################################################################
+gen-dist: dist-check
+ @$(ECHO) ""
+ @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
+ @$(ECHO) ""
+ $(MAKE) $(PROGRAM)
+ $(STRIP_PROG) $(PROGRAM)
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+# add program
+ (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+# add config files
+ for foo in $(CONFIG_FILES); do \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add documentation
+ for foo in $(DOC_FILES); do \
+ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Distribution with binary created.
+
+# anonymously ncftps the package to sourceforge
+gen-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# use with care
+gen-clean:
+ $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
+
+#############################################################################
+# solaris distribution. verified on SF machines by swa.
+#############################################################################
+solaris-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the package to sourceforge
+solaris-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+solaris-clean: gen-clean
+ @$(ECHO) Done.
+
+#############################################################################
+# hpux distribution
+#############################################################################
+hpux-dist:
+ @$(ECHO) coming soon.
+hpux-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# debian distribution
+#############################################################################
+debian-dist:
+ @$(ECHO) coming soon.
+debian-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# macosx distribution
+#############################################################################
+macosx-dist:
+ @$(ECHO) coming soon.
+macosx-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# amiga distribution
+#############################################################################
+amiga-dist:
+ @$(ECHO) coming soon.
+amiga-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# freebsd distribution. verified on SF machines by swa.
+#############################################################################
+freebsd-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the package to sourceforge
+freebsd-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+freebsd-clean: gen-clean
+ @$(ECHO) Done.
#############################################################################
# Windows distribution
#############################################################################
-# Tarball distribution
+# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
+# (FIXME:) only parts of the static / generated docs mix in doc/webserver
#############################################################################
-tarball-dist:
- @make clean
- make $(PROGRAM)
-# remove all objects and create the tarball with the binary
- cd .. && $(RM) ijb/a.out ijb/core ijb/*.@OBJEXT@ && tar --exclude "ijb/CVS" -cvzf ../ijb-distribution-$(VERSION).tar.gz ijb/
- chmod a+r ../../ijb-distribution-$(VERSION).tar.gz
- @$(ECHO) Tarball with binary created.
+
+tarball-dist: dist-check clean clobber
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+
+ for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
+ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
+ -name "PACKAGERS" \)`; do \
+ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
+ done && \
+ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
+
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Tarball distribution created.
+
+# anonymously ncftps the tarball to sourceforge
+tarball-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+tarball-clean:
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
#############################################################################
#
# Documentation
#
-# converts doc/source/*.sgml into html, text and man pages
+# converts doc/source/*.sgml into html and man pages
#
#############################################################################
-dok:
- mkdir -p doc/text doc/man
-# user manual
- rm -rf doc/webserver/user-manual
- cd doc/source && db2html -s ldp.dsl user-manual.sgml && mv user-manual ../webserver
- cd doc/source && db2html -s ldp.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source && db2html -s ldp.dsl developer-manual.sgml && mv developer-manual ../webserver
- cd doc/source && db2html -s ldp.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
-## faq
- rm -rf doc/webserver/faq
- cd doc/source && db2html -s ldp.dsl faq.sgml && mv faq ../webserver
- cd doc/source && db2html -s ldp.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-#############################################################################
+# developer manual
+dok-devel:
+ $(RM) doc/webserver/developer-manual/*.html
+ $(RM) -r doc/source/developer-manual
+ mkdir -p doc/source/developer-manual
+ cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
+
+# user manual
+dok-user:
+ $(RM) doc/webserver/user-manual/*.html
+ $(RM) -r doc/source/user-manual/
+ mkdir -p doc/source/user-manual
+ cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
+ # FIXME: temp fix so same stylesheet gets in more than one place so it works
+ # for all doc set-ups, including the 'user manual' config option in local
+ # system where it MUST be in same directory as html.
+ $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
+
+# faq
+dok-faq:
+ $(RM) doc/webserver/faq/*.html
+ $(RM) -r doc/source/faq
+ mkdir -p doc/source/faq
+ cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
+
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
+ $(RM) doc/man/* doc/webserver/man-page/*.html
+ifneq ($(MAN2HTML),false)
+ $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
+ man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
+else
+ $(MAKE) groff2html
+endif
+
+# Build man page from sgml. This requires the SGMLSpm perl module.
+# See CPAN, or your favorite perl repository. This is the preferred
+# target for man page generation!
+man: dok-release
+ mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
+ nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
+
+# For those with man2html ala RH7s.
+man2html:
+ mkdir -p doc/webserver/man-page
+ifneq ($(MAN2HTML),false)
+ $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
+ $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
+ $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
+# Twice because my version of man2html is pulling in commas and periods in URLs.
+ $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
+ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
+# Get rid of spurious \a from conversion. (How to do this with perl?)
+ $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
+else
+ $(MAKE) groff2html
+endif
+
+
+# Otherwise we get plain groff conversion.
+groff2html:
+ $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+
+
+# readme page and INSTALL file
+dok-readme: dok-release
+ cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../README ;\
+ $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
+ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
+ $(RM) tmp.*
+
+# index.sgml is used to create both the Home Page, and a local index
+# for documentation, etc.
#
-# Webserver
+# index.html for webserver:
+dok-webserver:
+ cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/'\
+ doc/webserver/index.html && $(RM) doc/webserver/*.bak
+
+# privoxy-index.html for local documentation:
+dok-index:
+ cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
+ $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
+ s/\.\d\. //;\
+ s/__copy/©/' \
+ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
+
+# Main documentation target.
+dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
+ @$(ECHO) Documentation created.
+
#
-# moves dokumentation to webserver
+# an alternative to the above dok. disabled man page creation for the moment
+#
+redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
+ @$(ECHO) Documentation created.
+
+## Make README
+redhat-readme:
+ cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
+ tmp.html > ../../README && $(RM) -r tmp.html
+
+## Make AUTHORS file
+dok-authors:
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
+ tmp.html > ../../AUTHORS && $(RM) tmp.html
+
+# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
+# exceptions accordingly. This needs to go before any doc building (doh).
+dok-release:
+ @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
+ @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
+ s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
+ doc/source/*sgml doc/source/*/*sgml
+ $(RM) -r doc/source/*bak doc/source/*/*bak
+ifeq ($(CODE_STATUS),stable)
+ @$(ECHO) Setting docs to stable $(VERSION)
+ @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
+ doc/source/*sgml doc/source/*/*sgml
+ $(RM) -r doc/source/*bak doc/source/*/*bak
+else
+ @$(ECHO) Setting docs to not stable $(VERSION)
+ @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
+ doc/source/*sgml doc/source/*/*sgml
+ $(RM) -r doc/source/*bak doc/source/*/*bak
+endif
+
+# Create release announcement in text and html, with short and long versions.
+# This is a standalone target, and must be invoked directly.
+# announce: dok-release
+# mkdir -p $(DOC_TMP)
+# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
+# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
+# cd $(DOC_TMP) && $(DB) announce.sgml &&\
+# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
+# mv -f *html *txt ../../..
+# rm -fr $(DOC_TMP)
+
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing. The new file is outputted
+# as config.new so that problem sections can be compared to previous
+# version. This is hardcored to w3m for html/text conversion. Also,
+# requires the shell util 'fmt'.
+config-file: dok-release
+ cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -i.bak utils/prepare-configfile.pl config.new
+
+ $(RM) *.bak
+ @$(ECHO) "****************************************************"
+ @$(ECHO) "The output file is config.new."
+ @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "In particular, check the Debug levels, the"
+ @$(ECHO) "permit-access, forward & socks examples and the"
+ @$(ECHO) "various user-manual examples, which all"
+ @$(ECHO) "probably got hammered."
+ @$(ECHO) "****************************************************"
+
+# config file, alternate version using lynx (perl stuff unfinished). Lynx
+# does not do so good a job.
+config-file-alt:
+ cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
+ $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
+ lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -pi -e 's/^( )//;\
+ s/:$\/:\n/' config.new
+
+#############################################################################
+#
+# Webserver
+#
+# moves dokumentation to webserver
#
#############################################################################
-webserver:
+webserver: tidy
@$(ECHO) -------------------------------------------------------
- @$(ECHO) You have run make dok before, right?
+ @$(ECHO) You have run make dok/redhat-dok before, right?
@$(ECHO) Note that this command scps all stuff to the webserver,
@$(ECHO) it will not remove obsolete documents.
@$(ECHO) -------------------------------------------------------
- chmod -R a+r doc/webserver
- find doc/webserver -type d -exec chmod a+rx {} \;
- cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
+
+ @$(ECHO) Uploading html
+ @cd doc/webserver; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+
+ @$(ECHO) Fixing permissions
+ @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+ @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
+
+
+web-actions: tidy
+ @$(ECHO) Uploading
+ @cd doc/webserver/actions; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+
+ @$(ECHO) Fixing permissions
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
+ @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+
+##
+dok-put:
+ tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
+ --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
+ doc/* INSTALL LICENSE AUTHORS README \
+ -czf $(DOC_FILE) ;\
+ $(ECHO) "Uploading doc package ..." ;\
+ scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
+ @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
+ $(RM) $(DOC_FILE)
+
+dok-get:
+ cd /tmp ;\
+ $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
+ $(TAR) -zxvf $(DOC_FILE)
+
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
+urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
# GNU regex
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
# Win32
w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
+win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/junkbust.ico config.h
+w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@else
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
+@AMIGAOS_ONLY@endif
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS)
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
-clobber: clean
- $(RM) $(PROGRAM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` TAGS junkbuster.log config.cache
+tidy:
+ $(RM) `find . -name "*~"`
+ $(RM) `find . -name "#*#"` # Emacs backup files
+ $(RM) `find . -name ".\#*"`
+
+clobber: tidy
+ $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
+ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
+ $(RM) -r autom4te.cache
+
+#
+# FIXME: What is all this?
+#
+ $(RM) cscope.* *.pdb *.lib *.exp
+
+distclean: clobber
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
-install: all
- #
- # FIXME: This is a dirty hack to have an install target
- # that works at least for some setups. This needs
- # to be fixed!
- #
- $(STRIP_PROG) $(PROGRAM)
- $(INSTALL) $(PROGRAM) $(SBIN_DEST)
- mkdir -p $(DEST)/user-manual
- mkdir -p $(DEST)/templates
- cp -r doc/webserver/user-manual $(DEST)
- cp -r templates $(DEST)
- $(INSTALL) config ijb.action re_filterfile trust $(DEST)
- # FIXME $(ECHO) junkbuster.logrotate junkbuster.monthly junkbuster.weekly
- # FIXME: Need new manual! $(GZIP_PROG) -c junkbuster.1 > $(MAN_DEST)/junkbuster.1.gz
- $(INSTALL) junkbuster.init /etc/init.d/junkbuster
-
+CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
+ $(ECHO) "$(CONF_BASE)/privoxy";\
+ else\
+ $(ECHO) "$(CONF_BASE)";\
+ fi)
+
+LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
+ $(ECHO) "/var/log/privoxy" ;\
+ else\
+ $(ECHO) "$(LOGS_DEST)";\
+ fi)
+
+PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
+ $(ECHO) "/var/run" ;\
+ else\
+ $(ECHO) "$(PIDS_DEST)";\
+ fi)
+
+check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
+ $(ECHO) "1";\
+ else\
+ $(ECHO) "0";\
+ fi)
+
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
+
+install-strip:
+ $(MAKE) install STRIP=-s
+
+# FIXME: Test USER and GROUP on Slack to make sure this works as
+# intended.
+#
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
+# Perhaps the whole user/group validation should be done here, and simplified.
+PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ @# Quick test for valid USER.
+ @if [ -n "$(USER)" ]; then \
+ $(ID) $(USER) >/dev/null || exit 1;\
+ fi
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# for file ownership purposes.
+# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
+# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+# fi
+
+ @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
+ $(CHMOD) $(DIR_MODE) $(MKDIR)
+ @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
+ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
+ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
+ @# Install the executable binary, strip if invoked as install-strip
+ @test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
+ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
+
+ @# Install the DOCS and man page. install-sh only does one file at a time.
+ @# FIXME: only handles jpegs.
+ -@if [ $(check_doc) = 0 ]; then \
+ DOC=$(DOC_DEST) ;\
+ else \
+ DOC=$(prefix)/doc/privoxy ;\
+ fi;\
+ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
+ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
+ if [ -d "$(DOK_WEB)" ]; then \
+ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
+ for i in user-manual developer-manual faq; do \
+ for ii in $(DOK_WEB)/$$i/*html; do \
+ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
+ done ;\
+ done ;\
+ for i in $(DOK_WEB)/user-manual/*jpg; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
+ done ;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
+ fi
+ @# Not all platforms support gzipped man pages.
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
+
+ @# Change the config file default directories according to the configured ones
+ @$(ECHO) Rewriting config for this installation
+ @if [ -f config.base ] ; then \
+ $(CAT) config >config~ ;\
+ $(MV) config.base config ;\
+ fi
+ $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
+ -@if [ $(check_doc) = 0 ]; then \
+ $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
+ else \
+ $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
+ fi;\
+ $(MV) config config.base
+ $(MV) config.updated config
+
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
+ @# configure. Later, install init script if appropriate.
+ @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
+ @for i in `find templates -type f`; do \
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
+ done
+
+ @# FIXME: group/user validation is overly convoluted.
+ @# If superuser install ... we require a minimum of group ownership
+ @# of those files the daemon writes to, to be non-root owned.
+ @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ if [ x$(USER) = x ] || [ $(USER) = root ]; then \
+ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
+ if [ "`$(ID) privoxy`" ] && \
+ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
+ $(ECHO) "Warning: Setting group owner to privoxy";\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
+ $(ECHO) " and to install the config files as that user and/or group!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
+ else \
+ GROUP_T=$(GROUP) ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
+ else \
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
+ GROUP_T=$(GROUP_T) ;\
+ fi ;\
+ else \
+ if [ ! "`id $(USER)`" = "`id`" ] ;then \
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R)" ;\
+ fi ;\
+ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
+ $(ECHO) Installing fresh $$i;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ elif [ -s "$(CONF_DEST)/$$i" ]; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
+ fi ;\
+ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ x$$USER != x ]; then \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ if [ x$$GROUP_T != x ]; then \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
+ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
+ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
+ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
+ $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
+ $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
+ $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
+ $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
+ $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
+ $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
+ fi ;\
+ else \
+ $(ECHO) "No init script installed, install it manually if needed" ;\
+ fi
+ $(RM) config.base config.tmp
+ @# mmmmm, good.
+ @$(ECHO) "$(PROGRAM_V) installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
+
+# rmdir is used as a precaution since it will not remove non-empty
+# directories. RH init script creates lock file and pid file.
+uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
+ @$(ECHO) Starting Privoxy uninstallation
+ @# KILL privoxy if running
+ @# XXX: the chkconfig line may need a DESTDIR prefix.
+ -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
+ $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
+ chkconfig --del $(PROGRAM) 2>/dev/null;\
+ fi
+ -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
+ -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
+
+ @# Program binary
+ @$(ECHO) Removing $(PROGRAM) binary
+ $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+
+ @# config files and dir, and maybe old install backups
+ -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ cd $(DESTDIR)$(CONF_DEST) ;\
+ for i in $(DESTDIR)$(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ done ;\
+ fi
+ @$(ECHO) Removing $(PROGRAM) config files
+ -@for i in $(DESTDIR)$(CONFIGS); do \
+ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
+ done
+ -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
+
+ @# man page and docs
+ @$(ECHO) Removing $(PROGRAM) docs
+ -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
+
+ @# Log and pidfile
+ @$(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
+
+ @# Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ @$(ECHO) Removing $(PROGRAM) directories
+ @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
+ @if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
+ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
+ $(ECHO) Removing $(DESTDIR)$(prefix) ;\
+ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
+ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
+ fi;\
+ fi
+
+ @# init scripts and logrotate
+ @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f $(DESTDIR)/etc/slackware-version ] && \
+ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
+ elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
+ && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
+ fi
+ @$(ECHO) Privoxy uninstalled, bye
+
+coffee:
+ @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
+ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
+ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
+ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
+ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
+ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
+ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
#############################################################################
## Local Variables:
## tab-width: 3
## end:
+
+# $Log: GNUmakefile.in,v $
+# Revision 1.177 2009/01/13 16:44:32 fabiankeil
+# Delete the standard.action file after moving
+# the pre-settings over to the default actions.
+#
+# Revision 1.176 2008/09/21 13:24:37 fabiankeil
+# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
+#
+# Revision 1.175 2008/08/30 12:03:07 fabiankeil
+# Remove FEATURE_COOKIE_JAR.
+#
+# Revision 1.174 2008/07/18 17:50:47 fabiankeil
+# Fix whitespace.
+#
+# Revision 1.173 2008/06/18 18:28:42 fabiankeil
+# Remove PDF-related stuff.
+#
+# Revision 1.172 2008/06/17 16:16:08 fabiankeil
+# - Stop building text files nobody cares about.
+# - Update copyright year.
+#
+# Revision 1.171 2008/06/13 15:24:57 fabiankeil
+# Move previously inline'd Perl code for the config-file target
+# into a separate file, have it work with older perl releases,
+# clean it up a bit and fix the "underlining" code.
+#
+# Revision 1.170 2008/06/12 16:38:50 fabiankeil
+# Add third-level domain to URL in dok-get target.
+#
+# Revision 1.169 2008/06/09 17:28:31 fabiankeil
+# - Recommend https for releasing files.
+# - Fix a warning about datarootdir being ignored.
+#
+# Revision 1.168 2008/05/23 18:03:12 fabiankeil
+# - Shorten meta description inserted in dok-webserver
+# and dok-index target.
+# - In config-file target, unset LANG for w3m as we
+# might otherwise end up with multi-byte characters.
+#
+# Revision 1.167 2008/05/23 14:39:09 fabiankeil
+# Silence dok-user complaint about @# not being found.
+#
+# Revision 1.166 2008/05/23 14:04:57 fabiankeil
+# - Get config-file target working with more recent Perl
+# versions. The generated file is still messed up, though.
+# - Fix comment typo.
+#
+# Revision 1.165 2008/05/22 16:57:23 fabiankeil
+# Fix coffee machine.
+#
+# Revision 1.164 2008/05/22 10:26:26 fabiankeil
+# - Remove parsers.@OBJEXT@'s dependency on encode.h.
+# - Include Emacs backup files in tidy target again.
+#
+# Revision 1.163 2008/05/04 18:01:53 fabiankeil
+# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
+#
+# Revision 1.162 2008/03/30 13:31:42 fabiankeil
+# Add DESTDIR support for the uninstall target.
+#
+# Revision 1.161 2008/03/30 13:19:13 fabiankeil
+# Add DESTDIR support for the install target. Closes PR#1910612.
+# Patch by Radoslaw Zielinski with minor modifications.
+#
+# Revision 1.160 2008/03/27 18:27:19 fabiankeil
+# Remove kill-popups action.
+#
+# Revision 1.159 2008/03/21 11:13:53 fabiankeil
+# Only gather host information if it's actually needed.
+# Also move the code out of accept_connection() so it's less likely
+# to delay other incoming connections if the host is misconfigured.
+#
+# Revision 1.158 2007/12/11 21:29:25 fabiankeil
+# Fix dependency list for cgiedit.c.
+#
+# Revision 1.157 2007/12/10 02:28:02 hal9
+# Unset $LANG for text processing of docs so we get pure text.
+#
+# Revision 1.156 2007/11/15 03:17:43 hal9
+# Some workaround changes to the config file perl stuff and comments, which is
+# broken here all by itself on perl 5.8.8.
+#
+# Revision 1.155 2007/09/22 16:23:25 fabiankeil
+# Update copyright line.
+#
+# Revision 1.154 2007/02/07 11:52:40 fabiankeil
+# Fix suse-dist as described in BR#1654052.
+# (I didn't test it, but it's done the same
+# way in redhat-dist which is known to work).
+#
+# Revision 1.153 2007/01/07 07:36:36 joergs
+# Added AmigaOS4 support.
+#
+# Revision 1.152 2006/12/13 14:53:51 etresoft
+# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
+#
+# Revision 1.151 2006/11/30 01:08:55 hal9
+# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
+#
+# Revision 1.150 2006/10/25 11:55:45 fabiankeil
+# Fix sed regexes for rewriting "confdir ." and "logdir .".
+# Thanks to Darel Henman for reporting this.
+#
+# Revision 1.149 2006/10/11 01:40:28 hal9
+# Apply patch from Neil McCalden to fix syntax issue.
+#
+# Revision 1.148 2006/09/26 10:57:58 hal9
+# Including Karsten's patch to fix make create-snapshot.
+#
+# Revision 1.147 2006/09/13 01:25:16 hal9
+# Make sure install forces in new default.action, default.filter, and
+# standard.filter. These are privoxy files, not user files.
+#
+# Revision 1.146 2006/09/08 23:57:19 hal9
+# User manual images are now user-manual doc directory, and fix make install
+# target accordingly.
+#
+# Revision 1.145 2006/09/08 02:32:00 hal9
+# Various changes to implement building and installing docs to be compatible
+# with the new "user-manual" settings in config from Roland. Docbook does not
+# seem to like dealing with more than one css file, so workaround that here.
+# Change 'make install' so it provides p_doc.css in the user-manual doc
+# directory so that functions well, and lastly modify 'make install' so that the
+# PATH is automatically set, and the 'user-manual' directive should done during
+# the install.
+#
+# Revision 1.144 2006/09/07 22:53:20 hal9
+# Make sure config sgml build related artifacts are cleaned out.
+#
+# Revision 1.143 2006/09/02 15:59:40 hal9
+# Add to code status to make install output.
+#
+# Revision 1.142 2006/08/29 01:46:24 hal9
+# Add user.filter to $CONFIGS.
+#
+# Revision 1.141 2006/08/12 03:54:37 david__schmidt
+# Windows service integration
+#
+# Revision 1.140 2006/07/18 14:48:45 david__schmidt
+# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
+# with what was really the latest development (the v_3_0_branch branch)
+#
+# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
+# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
+# only place it is used.
+#
+# Revision 1.104.2.27 2004/02/07 16:11:10 oes
+# Make clobber remove the autom4te.cache dir.
+# Closes BR #889300
+#
+# Revision 1.104.2.26 2004/01/31 16:32:25 oes
+# Adding a check for an htmldoc variant from the debian diff
+#
+# Revision 1.104.2.25 2004/01/31 01:15:33 oes
+# Fixed a typo; updated copyright notice
+#
+# Revision 1.104.2.24 2003/12/03 10:30:02 oes
+# - Added new dependency: actions.c -> ssplit.h
+# - Excluded PDF docs from src tarball
+#
+# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
+# Strip trailing spaces from config-file generation, bug #724596.
+#
+# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
+# Minor changes for Privoxy home page:
+# - Handle © more sanely
+# - include link to announce.txt
+# Also, disable 'make announce' target.
+#
+# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
+# Catch up with main trunk install/uninstall. Quiet output, etc.
+#
+# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
+# Port of make install, etc from main trunk. Needs testing! Add Slackware
+# support, and other related changes. Update related docs.
+#
+# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
+# New user-manual examples in config-file are getting wrapped. Add warning.
+#
+# Revision 1.104.2.18 2002/08/23 12:22:40 oes
+# Added warning to broken install target
+#
+# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
+# More (minor) cleanup of html before pdf processing to make some relative
+# links work as pdf -> pdf. Upload pdf as zip archive now.
+#
+# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
+# Added pdf docs to make webserver target.
+#
+# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
+# New targets for man page (make man) and pdf (make dok-pdf) targets.
+#
+# Revision 1.104.2.14 2002/08/10 11:19:37 oes
+# - Make -Ipcre (again) conditional on STATIC_PCRE
+# - $(RPMBUILD) -> $(RPM) for SuSE
+# - Add dependency: pcrs.o deps on config.h
+#
+# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
+# Remove pdf2 target, and make it dok-shtml (single page html for pdf
+# conversion).
+#
+# Revision 1.104.2.12 2002/08/06 11:29:36 oes
+# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
+#
+# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
+# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
+# *I think* it was supposed to be (was breaking upload targets since it was
+# set to RPM_VERSION).
+#
+# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
+# cleanups of the redhat-srpm target
+#
+# Revision 1.104.2.9 2002/07/26 15:17:02 oes
+# - Added generation of default.action from defaul.action.master
+# - Deleted obsolete re_filterfile.txt generation
+#
+# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
+# added helper targets to the makefile. They shouldn't break anything, but
+# make my life a lot easier.
+#
+# The new rpm has been splitted into two parts, one for package installation/
+# removal, one for package building.
+# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
+# by rpmbuild -ta (this is backwards compatible)
+#
+# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
+# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
+# thus breaking them completely.
+#
+# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
+# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
+# index.html and team/index.html)
+#
+# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
+# This is more cleanup on the make config-file target. Most issues for
+# automatic generation are taken care of. There are still some problems
+# that require hand editing. Namely, some of the examples that are > 80 chars.
+#
+# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
+# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
+# new target is 'make config-file', _not_ make config.
+#
+# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
+# 'make config' target added (WIP) for future generation of config file from
+# text in u-m so the two are in sync. New generated config, which requires
+# some hand editing for the time being.
+#
+# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
+# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
+# not being cleaned up in doc/webserver.
+#
+# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
+# Remove Table of Contents from readme with oes's dsl trick.
+#
+# Revision 1.104 2002/05/24 00:03:49 oes
+# Use p_doc.css for the Homepage for consistency
+#
+# Revision 1.103 2002/05/23 23:19:00 oes
+# Use dsl without TOC for the homepage
+#
+# Revision 1.102 2002/05/16 01:20:17 hal9
+# make announce target added.
+#
+# Revision 1.101 2002/05/15 12:28:46 oes
+# Trying to keep Hal happy :)
+#
+# Revision 1.100 2002/05/08 13:48:18 hal9
+# Ooops, that trashed JB v2.0.2 comment. Fixed.
+#
+# Revision 1.99 2002/05/08 13:42:07 hal9
+# This fixes the numbering problem on index.html in contact info section (.1.). Using
+# perl, since its way too convoluted to try to fix proper with docbook.
+#
+# Revision 1.98 2002/05/03 14:33:06 oes
+# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
+#
+# Revision 1.97 2002/04/27 20:27:43 swa
+# no longer needed due to new
+# PACKAGE_VERSION process
+#
+# Revision 1.96 2002/04/27 17:44:32 morcego
+# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
+# - Using the RM macro everywhere rm is called (either we use, or don't)
+# - Same for RPM
+#
+# Revision 1.95 2002/04/27 15:37:25 swa
+# replacing directory in document creation process
+# no longer necessary.
+#
+# Revision 1.94 2002/04/27 08:23:29 swa
+# pdf process reviewed and cleaned up
+#
+# Revision 1.93 2002/04/27 04:55:53 morcego
+# privoxy-cl.spec now gets removed by clobber target
+#
+# Revision 1.92 2002/04/27 04:53:40 morcego
+# Adding --exclude "PACKAGERS" to every tar command that applies (not for
+# webserver target)
+#
+# Revision 1.91 2002/04/27 04:44:51 morcego
+# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
+# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
+# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
+# conectiva-upload
+# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
+# for Conectiva Linux
+#
+# Revision 1.90 2002/04/26 17:46:53 swa
+# be consistent
+#
+# Revision 1.89 2002/04/26 17:20:54 swa
+# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
+#
+# Revision 1.88 2002/04/25 19:13:57 morcego
+# Removed RPM release number declaration on configure.in
+# Changed makefile to use given value for RPM_PACKAGEV when on uploading
+# targets (will produce an error, explaining who to do it, if no value
+# if provided).
+#
+# Revision 1.87 2002/04/23 14:10:59 swa
+# now create pdf documents
+#
+# Revision 1.86 2002/04/15 04:30:27 hal9
+# Missed two -pi.bak's on perl/cygwin problem.
+#
+# Revision 1.85 2002/04/14 01:05:34 hal9
+# Revert dok-webserver change for SF logo.
+#
+# Revision 1.84 2002/04/13 22:43:25 hal9
+# -Fix dok-webserver for SF logo (more perl).
+# -Change all perl -pi to perl -pi.bak for Cygwin problem.
+#
+# Revision 1.83 2002/04/12 09:39:25 oes
+# Excluding yet more files from tarball; making dist warning yet more scary
+#
+# Revision 1.82 2002/04/11 21:07:11 oes
+# Excluding more files from tarball build
+#
+# Revision 1.81 2002/04/11 14:40:27 oes
+# Fixed typo -- Thanks, Moritz!
+#
+# Revision 1.80 2002/04/11 12:50:00 oes
+# Fixed tarball-dist target
+#
+# Revision 1.79 2002/04/11 06:49:28 oes
+# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
+#
+# Revision 1.78 2002/04/09 13:37:11 sarantis
+# fix tar options typo
+#
+# Revision 1.77 2002/04/09 13:28:53 swa
+# build suse and gen-dist with html docs
+#
+# Revision 1.76 2002/04/08 22:43:41 oes
+# Fix: Include dotfiles in fixing webserver permissions
+#
+# Revision 1.75 2002/04/08 22:14:59 oes
+# Silencing tar warnings in the web* targets
+#
+# Revision 1.74 2002/04/08 15:22:44 hal9
+# This has finishing touches for dok building. Should be ready to go.
+# -The main doc build is now 'make dok', should work on Redhat too.
+# -Removed man page from main doc build. It is built separately due to
+# perl scripts that most aren't likely to have.
+#
+# Revision 1.73 2002/04/08 14:03:24 oes
+# oes for al: Fix install target
+#
+# Revision 1.72 2002/04/08 13:42:11 oes
+# Added safety check to *-dist targets; fixed permissions for feedback logfile
+#
+# Revision 1.71 2002/04/07 20:32:03 hal9
+# -Add meta data kludge for make dok-webserver via $(PERL).
+# -Add subdirs for 'make dok-release'.
+#
+# Revision 1.70 2002/04/07 08:59:40 swa
+# generated files. do NOT edit.
+# fixed directory bug in makefile.
+#
+# Revision 1.69 2002/04/07 08:10:47 swa
+# create some of the webserver docs
+# automatically (in particular if
+# those docs recycle other documentation
+# fragments). Now committed webserver's
+# index file.
+#
+# Revision 1.68 2002/04/07 07:58:11 swa
+# create some of the webserver docs
+# automatically (in particular if
+# those docs recycle other documentation
+# fragments)
+#
+# Revision 1.67 2002/04/07 05:31:42 hal9
+# Add 'dok-release' target:
+# -Set doc entities to VERSION and CODE_STATUS during make.
+# -Set doc conditional content flags (stable vs non-stable).
+# A separate target for the time being but needs to be incorporated into
+# dok build at some point.
+# -Filter out a spurious ^G from new man page > html converion in man2html.
+#
+# Revision 1.66 2002/04/06 20:28:21 jongfoster
+# Prettifying groff2html.
+# Using GNU Make's conditional makefile feature rather than shell "if"s.
+# (The shell "if"s were hiding errors)
+# "perl" -> "$(PERL)"
+# Spaces->tabs in a couple of places.
+#
+# Revision 1.65 2002/04/06 05:16:39 hal9
+# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
+# -Both of these will soon be generated files.
+#
+# Revision 1.64 2002/04/04 22:14:51 oes
+# No longer rely on find honoring -iname
+#
+# Revision 1.63 2002/04/04 21:06:22 swa
+# cosmetics.
+#
+# Revision 1.62 2002/04/04 20:49:50 swa
+# attempt to consolidate the
+# different dokbook versions.
+#
+# Revision 1.61 2002/04/04 19:18:21 swa
+# readme was leftover directory. use w3m instead
+# of lynx to be consistent among developers. use
+# consistent target naming.
+#
+# Revision 1.60 2002/04/04 12:25:41 oes
+# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
+#
+# Revision 1.59 2002/04/04 08:32:45 swa
+# wrong name for tarball-dist target. further fixed content of tarball dist
+#
+# Revision 1.58 2002/04/04 06:32:58 hal9
+# New dok targets for make readme.
+#
+# Revision 1.57 2002/04/04 00:36:36 gliptak
+# always use pcre for matching
+#
+# Revision 1.56 2002/04/03 22:28:03 gliptak
+# Removed references to gnu_regex
+#
+# Revision 1.55 2002/04/03 19:54:29 swa
+# freebsd tested to work. attempt to move tarball dist target forward
+#
+# Revision 1.54 2002/04/03 14:54:07 oes
+# Standard clean and clobber semantics II
+#
+# Revision 1.53 2002/04/03 14:19:16 oes
+# Standard clean and clobber semantics
+#
+# Revision 1.52 2002/04/03 02:56:18 hal9
+# Revert previous FAQ numbering kludge.
+#
+# Revision 1.51 2002/04/02 13:03:56 oes
+# Added fix for webserver permissions
+#
+# Revision 1.50 2002/04/02 03:46:24 hal9
+# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
+# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
+#
+# Revision 1.49 2002/03/30 22:20:12 swa
+# cd didn't work. neither did find.
+#
+# Revision 1.48 2002/03/30 19:04:06 swa
+# people release differently. no good.
+# I want to make parts of the docs only.
+#
+# Revision 1.47 2002/03/30 09:05:21 swa
+# better packaging. better rpm building.
+# tar failed on sun (no exclude there).
+#
+# Revision 1.46 2002/03/29 20:09:01 swa
+# al's patch
+#
+# Revision 1.45 2002/03/29 19:45:45 swa
+# for lazy swa
+#
+# Revision 1.44 2002/03/29 17:42:44 gliptak
+# Correcting for Solaris tar limitations
+#
+# Revision 1.43 2002/03/29 07:40:03 swa
+# fixed make webserver. doh
+#
+# Revision 1.42 2002/03/29 06:59:04 swa
+# other users could not modify files on webserver
+#
+# Revision 1.41 2002/03/28 20:43:00 swa
+# set make correctly
+#
+# Revision 1.40 2002/03/28 04:22:44 hal9
+# More on man2html stuff.
+#
+# Revision 1.39 2002/03/28 01:04:14 hal9
+# More man2html stuff for docs.
+#
+# Revision 1.38 2002/03/27 16:02:30 swa
+# have a generic target
+#
+# Revision 1.37 2002/03/27 15:30:26 swa
+# have a consistent appearance
+#
+# Revision 1.36 2002/03/27 14:58:08 swa
+# can be used by mutilple targets
+#
+# Revision 1.35 2002/03/27 14:53:19 swa
+# added solaris-dist
+#
+# Revision 1.34 2002/03/27 10:30:11 swa
+# we want a html man file on the webserver
+#
+# Revision 1.33 2002/03/27 03:05:35 hal9
+# Added man2html target for docs (redhat-dok only for now)
+#
+# Revision 1.32 2002/03/26 22:29:54 swa
+# we have a new homepage!
+#
+# Revision 1.31 2002/03/26 14:00:18 swa
+# fixed make tarball, tarball-dist, tarball-clean
+#
+# Revision 1.30 2002/03/25 12:52:25 swa
+# new targets
+#
+# Revision 1.29 2002/03/24 17:03:55 jongfoster
+# Name change
+#
+# Revision 1.28 2002/03/24 16:19:48 swa
+# configure needs to be generated.
+#
+# Revision 1.27 2002/03/24 16:13:57 swa
+# generated files are a nono in cvs
+#
+# Revision 1.26 2002/03/24 15:36:02 swa
+# did not build.
+#
+# Revision 1.25 2002/03/24 14:31:08 swa
+# remove more crappy files. set RPM
+# release version correctly.
+#
+# Revision 1.24 2002/03/24 14:19:55 swa
+# set rpm package release in configure.in. nowhere else.
+#
+# Revision 1.23 2002/03/24 13:06:49 swa
+# suse-clean now runs fine
+#
+# Revision 1.22 2002/03/24 12:56:21 swa
+# name change related issues.
+#
+# Revision 1.21 2002/03/24 12:43:57 swa
+# name change
+#
+# Revision 1.20 2002/03/24 11:39:17 jongfoster
+# Renaming config files
+#
+# Revision 1.19 2002/03/22 20:53:03 morcego
+# - Ongoing process to change name to JunkbusterNG
+# - configure/configure.in: no change needed
+# - GNUmakefile.in:
+# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
+# - PROGRAM = jbng@EXEEXT@
+# - rh-spec now references as junkbusterng-rh.spec
+# - redhat-upload: references changed to junkbusterng-* (package names)
+# - tarball-dist: references changed to JunkbusterNG-distribution-*
+# - tarball-src: now JunkbusterNG-*
+# - install: initscript now junkbusterng.init and junkbusterng (when
+# installed)
+# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
+# - junkbusterng.spec:
+# - References to the expression ijb where changed where possible
+# - New package name: junkbusterng (all in lower case, acording to
+# the LSB recomendation)
+# - Version changed to: 2.9.13
+# - Release: 1
+# - Added: junkbuster to obsoletes and conflicts (Not sure this is
+# right. If it obsoletes, why conflict ? Have to check it later)
+# - Summary changed: Stefan, please check and aprove it
+# - Changes description to use the new name
+# - Sed string was NOT changed. Have to wait to the manpage to
+# change first
+# - Keeping the user junkbuster for now. It will require some aditional
+# changes on the script (scheduled for the next specfile release)
+# - Added post entry to move the old logfile to the new log directory
+# - Removing "chkconfig --add" entry (not good to have it automaticaly
+# added to the startup list).
+# - Added preun section to stop the service with the old name, as well
+# as remove it from the startup list
+# - Removed the chkconfig --del entry from the conditional block on
+# the preun scriptlet (now handled on the %files section)
+# - junkbuster.init: renamed to junkbusterng.init
+# - junkbusterng.init:
+# - Changed JB_BIN to jbng
+# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
+# be used where necessary (config dir)
+#
+# Aditional notes:
+# - The config directory is /etc/junkbuster yet. Have to change it on the
+# specfile, after it is changes on the code
+# - The only files that got renamed on the cvs tree were the rh specfile and
+# the init file. Some file references got changes on the makefile and on the
+# rh-spec (as listed above)
+#
+# Revision 1.18 2002/03/21 23:00:00 swa
+# want to autogenerate stuff.
+#
+# Revision 1.17 2002/03/19 19:30:04 morcego
+# - Fixing stylesheet checking on configure. If it is found, no further checks
+# should be done
+#
+# - configure will now check for db2html or docbook2html (should work now
+# on SuSe without the docbktls package)
+#
+# Revision 1.16 2002/03/14 22:32:32 hal9
+# Bumped the RPM version.
+#
+# Revision 1.15 2002/03/08 20:00:28 swa
+# some leftovers.
+#
+# Revision 1.14 2002/03/07 18:25:56 swa
+# synced redhat and suse build process
+#
+# Revision 1.13 2002/03/07 17:17:56 oes
+# (Hopefully) fixed for older make versions
+#
+# Revision 1.12 2002/03/07 15:28:27 swa
+# more informative
+#
+# Revision 1.11 2002/03/06 14:33:18 sarantis
+# Use proper temp file, not "abc".
+#
+# Revision 1.10 2002/03/06 14:19:35 sarantis
+# Cleanup PID_FILE_PATH from redhat-dist target
+#
+# Revision 1.9 2002/03/05 17:31:11 morcego
+# Search for docbook.dsl. Should solve portability problems for SuSe.
+#
+# Revision 1.8 2002/03/05 14:07:42 morcego
+# configure now detects rpm topdir, and change GNUmakefile acordingly
+# (based on sugestion by Sarantis Paskalis)
+#
+# Revision 1.7 2002/03/05 13:43:28 morcego
+# Checking for text browser, so redhat-dok can work.
+#
+# Revision 1.6 2002/03/05 13:10:51 morcego
+# Changes to implement redhat-dok (Hal Burgiss)
+# Changes to make it work on other distros and out-of-the-shelf configurations
+#
+# Revision 1.5 2002/02/27 15:30:39 hal9
+# Reset $(RPM_PACKAGEV) to 1 (was 2)
+#
+# Revision 1.4 2002/01/17 21:44:04 jongfoster
+# Adding urlmatch.[ch]
+#
+# Revision 1.3 2002/01/04 15:26:08 oes
+# Added tarball-src target
+#
+# Revision 1.2 2001/12/30 14:07:31 steudten
+# - Add signal handling (unix)
+# - Add SIGHUP handler (unix)
+# - Add creation of pidfile (unix)
+# - Add action 'top' in rc file (RH)
+# - Add entry 'SIGNALS' to manpage
+# - Add exit message to logfile (unix)
+#
+# Revision 1.1 2001/12/01 11:22:57 jongfoster
+# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
+# make break in a more obvious way.
+# Adding .PHONY section.
+#
+# Revision 1.40 2001/12/01 00:24:11 jongfoster
+# Renaming various config files
+# Fixing CR->CRLF under Win32 (I hope)
+#
+# Revision 1.39 2001/11/06 12:07:30 steudten
+# Add --clean for building rpm in target redhat-dist.
+#
+# Revision 1.38 2001/11/05 21:35:23 steudten
+# Complete rewrite for the 'redhat-dist' target.
+# Checks for writeable RPM build directories for calling user.
+# So you must not be root, just set the modes to 1777 to
+# build a RH package.
+# Fix the upload-target to be arch independant.
+# Add target for 'solaris-dist' - coming soon.
+#
+# Revision 1.37 2001/11/01 00:52:04 hal9
+# Redhat-upload stuff per Stefan.
+#
+# Revision 1.36 2001/10/31 19:26:13 swa
+# automate process of uploading new releases
+# to sf.
+#
+# Revision 1.35 2001/10/15 22:14:59 joergs
+# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
+# the general CFLAGS already.
+#
+# Revision 1.34 2001/10/15 18:28:06 steudten
+# remove config.cache for target clobber.
+# Cleanup make dist for RH and S.u.S.E.
+#
+# Revision 1.33 2001/10/10 12:43:33 oes
+# Added ugly hack to make install target work at least for some setups.
+#
+# Revision 1.32 2001/10/09 22:38:19 jongfoster
+# Correcting actionsfile filename for Win32 INI build
+#
+# Revision 1.31 2001/09/23 10:13:48 swa
+# upload process established. run make webserver and
+# the documentation is moved to the webserver. documents
+# are now linked correctly.
+#
+# Revision 1.30 2001/09/19 17:55:49 oes
+# Fixed CFLAGS
+#
+# Revision 1.29 2001/09/16 17:34:27 jongfoster
+# Removing showargs.[ch], adding cgi(simple|edit).[ch]
+# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
+# of build problems.
+#
+# Revision 1.28 2001/09/13 15:19:08 swa
+# we want text files as well.
+#
+# Revision 1.27 2001/09/13 13:11:37 steudten
+#
+# Replace DEBUG_CFLAGS with OTHER_CFLAGS
+#
+# Revision 1.26 2001/09/12 23:44:54 david__schmidt
+# Mac OSX (Darwin) support added.
+#
+# Revision 1.25 2001/09/12 22:55:45 joergs
+# AmigaOS support added.
+#
+# Revision 1.24 2001/09/12 17:28:59 david__schmidt
+#
+# OS/2 port: update autoconf'd support for the platform.
+#
+# Revision 1.23 2001/09/12 16:28:42 swa
+# added "make dok" section to generate html pages from
+# the sgml source documents. note that the we do not want
+# generated stuff in cvs.
+#
+# Revision 1.22 2001/09/10 16:31:23 swa
+# buildroot definition in the specfile fucks up the build
+# process under suse. hence I moved it to the "rpm -ta"
+# command
+#
+# Revision 1.21 2001/09/10 11:12:49 oes
+# Turning on -Wall
+#
+# Revision 1.20 2001/08/02 22:04:29 jongfoster
+# Removing some remaining references to obsolete w32rulesdlg.[ch]
+#
+# Revision 1.19 2001/07/30 22:14:03 jongfoster
+# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
+#
+# Revision 1.18 2001/07/29 17:09:17 jongfoster
+# Major changes to build system in order to fix these bugs:
+# - pthreads under Linux was broken - changed -lpthread to -pthread
+# - Compiling in MinGW32 mode under CygWin now correctly detects
+# which shared libraries are available
+# - Solaris support (?) (Not tested under Solaris yet)
+#
+# Revision 1.17 2001/07/28 16:44:54 oes
+# Fixed sed LF->CRLF conversion and removed deprecated files
+#
+# Revision 1.16 2001/07/15 19:45:33 jongfoster
+# Added support for linking with POSIX threads library
+#
+# Revision 1.15 2001/07/13 13:48:07 oes
+# - Moved STATIC #define for pcre to (ac)config.h
+# - Made -Ipcre depandant on static pcre compilation to
+# avoid version conflicts
+# - Included compilation and depandancies for new deanimate.c
+# - Made changes to the pcre/pcreposix/pcrs build process
+# as required by the new library autodetection in
+# configure.in
+#
+# Revision 1.14 2001/07/01 16:27:44 oes
+# Fixed misplaced dependancy
+#
+# Revision 1.13 2001/06/29 13:18:36 oes
+# - added depandancy of filters.o on cgi.h
+#
+# Revision 1.12 2001/06/12 17:15:56 swa
+# fixes, because a clean build on rh6.1 was impossible.
+# GZIP confuses make, %configure confuses rpm, etc.
+#
+# Revision 1.11 2001/06/11 11:26:35 sarantis
+# RPM version should be the same as ijbswa version. The rpm release is
+# specified in the specfile.
+#
+# Revision 1.10 2001/06/07 17:27:45 swa
+# added suse build section
+#
+# Revision 1.9 2001/06/04 18:31:58 swa
+# files are now prefixed with either `confdir' or `logdir'.
+# `make redhat-dist' replaces both entries confdir and logdir
+# with redhat values
+#
+# Revision 1.8 2001/06/04 10:44:57 swa
+# `make redhatr-dist' now works. Except for the paths
+# in the config file.
+#
+# Revision 1.7 2001/06/03 17:09:09 swa
+# swa for oes: reversed my earlier change
+#
+# Revision 1.6 2001/06/03 17:07:27 swa
+# swa for oes
+#
+# Revision 1.5 2001/06/03 13:57:26 swa
+# compile cgi.c (for andreas' GUI)
+#
+# Revision 1.4 2001/05/31 21:18:45 jongfoster
+# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
+#
+# Revision 1.3 2001/05/29 20:02:48 joergs
+# Changes for AmigaOS added.
+#
+# Revision 1.2 2001/05/17 22:23:23 oes
+# - Added auto-generation of CRLFs for Win32 config files
+# - Added comment-prefix to all Win32-only options in the config file
+# and provided auto stripping of this prefix for the Win32 platform by make
+#
+# Revision 1.1.1.1 2001/05/15 13:59:00 oes
+# Initial import of version 2.9.3 source tree
+#
+#