const char loadcfg_rcs[] = "$Id: loadcfg.c,v 1.86 2009/02/08 19:18:57 fabiankeil Exp $"; /********************************************************************* * * File : $Source: /cvsroot/ijbswa/current/loadcfg.c,v $ * * Purpose : Loads settings from the configuration file into * global variables. This file contains both the * routine to load the configuration and the global * variables it writes to. * * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge * Privoxy team. http://www.privoxy.org/ * * Based on the Internet Junkbuster originally written * by and Copyright (C) 1997 Anonymous Coders and * Junkbusters Corporation. http://www.junkbusters.com * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General * Public License as published by the Free Software * Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY; without even the * implied warranty of MERCHANTABILITY or FITNESS FOR A * PARTICULAR PURPOSE. See the GNU General Public * License for more details. * * The GNU General Public License should be included with * this file. If not, you can view it at * http://www.gnu.org/copyleft/gpl.html * or write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Revisions : * $Log: loadcfg.c,v $ * Revision 1.86 2009/02/08 19:18:57 fabiankeil * Now that we have the match-all.action file, the other action * files changed their position in config->actions_file[] back * to the way it was before standard.action got removed and the * changes from revision 1.84 have to be reverted. * * Revision 1.85 2009/01/22 12:06:26 fabiankeil * Don't keep connections alive when running single-threaded. * * Revision 1.84 2009/01/14 16:14:36 fabiankeil * Due to the standard.action file removal, the other action * files changed their position in config->actions_file[]. * Update mingw32 kludge accordingly. * * Revision 1.83 2008/12/20 14:53:55 fabiankeil * Add config option socket-timeout to control the time * Privoxy waits for data to arrive on a socket. Useful * in case of stale ssh tunnels or when fuzz-testing. * * Revision 1.82 2008/11/16 12:43:49 fabiankeil * Turn keep-alive support into a runtime feature * that is disabled by setting keep-alive-timeout * to a negative value. * * Revision 1.81 2008/11/13 09:08:42 fabiankeil * Add new config option: keep-alive-timeout. * * Revision 1.80 2008/08/31 15:59:03 fabiankeil * There's no reason to let remote toggling support depend * on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't. * * Revision 1.79 2008/08/30 12:03:07 fabiankeil * Remove FEATURE_COOKIE_JAR. * * Revision 1.78 2008/08/02 08:23:22 fabiankeil * If the enforce-blocks directive is used with FEATURE_FORCE_LOAD * disabled, log a message that blocks will always be enforced * instead of complaining about an unrecognized directive. * Reported by Pietro Leone. * * Revision 1.77 2008/05/26 16:13:22 fabiankeil * Reuse directive_hash and don't hash the same directive twice. * * Revision 1.76 2008/05/10 09:03:16 fabiankeil * - Merge three string_append() calls. * - Remove useless assertion. * * Revision 1.75 2008/03/30 14:52:05 fabiankeil * Rename load_actions_file() and load_re_filterfile() * as they load multiple files "now". * * Revision 1.74 2008/03/26 18:07:07 fabiankeil * Add hostname directive. Closes PR#1918189. * * Revision 1.73 2008/02/16 16:54:51 fabiankeil * Fix typo. * * Revision 1.72 2008/02/03 13:46:15 fabiankeil * Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes. * * Revision 1.71 2007/12/23 15:24:56 fabiankeil * Reword "unrecognized directive" warning, use better * mark up and add a
. Fixes parts of #1856559. * * Revision 1.70 2007/12/15 14:24:05 fabiankeil * Plug memory leak if listen-address only specifies the port. * * Revision 1.69 2007/10/27 13:02:27 fabiankeil * Relocate daemon-mode-related log messages to make sure * they aren't shown again in case of configuration reloads. * * Revision 1.68 2007/10/19 16:32:34 fabiankeil * Plug memory leak introduced with my last commit. * * Revision 1.67 2007/10/14 14:12:41 fabiankeil * When in daemon mode, close stderr after the configuration file has been * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436. * * Revision 1.66 2007/08/05 14:02:09 fabiankeil * #1763173 from Stefan Huehner: declare unload_configfile() static. * * Revision 1.65 2007/07/21 11:51:36 fabiankeil * As Hal noticed, checking dispatch_cgi() as the last cruncher * looks like a bug if CGI requests are blocked unintentionally, * so don't do it unless the user enabled the new config option * "allow-cgi-request-crunching". * * Revision 1.64 2007/05/21 10:44:08 fabiankeil * - Use strlcpy() instead of strcpy(). * - Stop treating actions files special. Expect a complete file name * (with or without path) like it's done for the rest of the files. * Closes FR#588084. * - Remove an unnecessary temporary memory allocation. * - Don't log anything to the console when running as * daemon and no errors occurred. * * Revision 1.63 2007/04/09 18:11:36 fabiankeil * Don't mistake VC++'s _snprintf() for a snprintf() replacement. * * Revision 1.62 2007/03/17 15:20:05 fabiankeil * New config option: enforce-blocks. * * Revision 1.61 2007/03/16 16:47:35 fabiankeil * - Mention other reasons why acl directive loading might have failed. * - Don't log the acl source if the acl destination is to blame. * * Revision 1.60 2007/01/27 13:09:16 fabiankeil * Add new config option "templdir" to * change the templates directory. * * Revision 1.59 2006/12/31 17:56:38 fabiankeil * Added config option accept-intercepted-requests * and disabled it by default. * * Revision 1.58 2006/12/31 14:24:29 fabiankeil * Fix gcc43 compiler warnings. * * Revision 1.57 2006/12/21 12:57:48 fabiankeil * Add config option "split-large-forms" * to work around the browser bug reported * in BR #1570678. * * Revision 1.56 2006/12/17 17:04:51 fabiankeil * Move the
in the generated HTML for the config * options from the beginning of the string to its end. * Keeps the white space in balance. * * Revision 1.55 2006/11/28 15:31:52 fabiankeil * Fix memory leak in case of config file reloads. * * Revision 1.54 2006/10/21 16:04:22 fabiankeil * Modified kludge for win32 to make ming32 menu * "Options/Edit Filters" (sort of) work again. * Same limitations as for the action files apply. * Fixes BR 1567373. * * Revision 1.53 2006/09/06 18:45:03 fabiankeil * Incorporate modified version of Roland Rosenfeld's patch to * optionally access the user-manual via Privoxy. Closes patch 679075. * * Formatting changed to Privoxy style, added call to * cgi_error_no_template if the requested file doesn't * exist and modified check whether or not Privoxy itself * should serve the manual. Should work cross-platform now. * * Revision 1.52 2006/09/06 10:43:32 fabiankeil * Added config option enable-remote-http-toggle * to specify if Privoxy should recognize special * headers (currently only X-Filter) to change its * behaviour. Disabled by default. * * Revision 1.51 2006/09/06 09:23:37 fabiankeil * Make number of retries in case of forwarded-connect problems * a config file option (forwarded-connect-retries) and use 0 as * default. * * Revision 1.50 2006/07/18 14:48:46 david__schmidt * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) * with what was really the latest development (the v_3_0_branch branch) * * Revision 1.48.2.7 2006/02/02 17:29:16 david__schmidt * Don't forget to malloc space for the null terminator... * * Revision 1.48.2.6 2006/01/29 23:10:56 david__schmidt * Multiple filter file support * * Revision 1.48.2.5 2003/05/08 15:17:25 oes * Closed two memory leaks; hopefully the last remaining ones * (in the main execution paths, anyway). * * Revision 1.48.2.4 2003/04/11 12:06:14 oes * Addressed bug #719435 * - Extraneous filterfile directives now logged as errors * - This and unrecnonised directives now really obvious on status page * * Revision 1.48.2.3 2003/03/11 11:53:59 oes * Cosmetic: Renamed cryptic variable * * Revision 1.48.2.2 2002/11/12 16:28:20 oes * Move unrelated variable declaration out of #ifdef FEATURE_ACL; fixes bug #636655 * * Revision 1.48.2.1 2002/08/21 17:58:05 oes * Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) * * Revision 1.48 2002/05/14 21:30:38 oes * savearg now uses own linking code instead of (now special-cased) add_help_link * * Revision 1.47 2002/05/12 21:36:29 jongfoster * Correcting function comments * * Revision 1.46 2002/04/26 12:55:14 oes * - New option "user-manual", defaults to our site * via project.h #define * - savearg now embeds option names in help links * * Revision 1.45 2002/04/24 02:11:54 oes * Jon's multiple AF patch: Allow up to MAX_AF_FILES actionsfile options * * Revision 1.44 2002/04/08 20:37:13 swa * fixed JB spelling * * Revision 1.43 2002/04/08 20:36:50 swa * fixed JB spelling * * Revision 1.42 2002/04/05 15:50:15 oes * fix for invalid HTML proxy_args * * Revision 1.41 2002/03/31 17:19:00 jongfoster * Win32 only: Enabling STRICT to fix a VC++ compile warning. * * Revision 1.40 2002/03/26 22:29:55 swa * we have a new homepage! * * Revision 1.39 2002/03/24 13:25:43 swa * name change related issues * * Revision 1.38 2002/03/24 13:05:48 jongfoster * Renaming re_filterfile to filterfile * * Revision 1.37 2002/03/16 23:54:06 jongfoster * Adding graceful termination feature, to help look for memory leaks. * If you enable this (which, by design, has to be done by hand * editing config.h) and then go to http://i.j.b/die, then the program * will exit cleanly after the *next* request. It should free all the * memory that was used. * * Revision 1.36 2002/03/13 00:27:05 jongfoster * Killing warnings * * Revision 1.35 2002/03/07 03:52:44 oes * Set logging to tty for --no-daemon mode * * Revision 1.34 2002/03/06 23:14:35 jongfoster * Trivial cosmetic changes to make function comments easier to find. * * Revision 1.33 2002/03/05 04:52:42 oes * Deleted non-errlog debugging code * * Revision 1.32 2002/03/04 18:24:53 oes * Re-enabled output of unknown config directive hash * * Revision 1.31 2002/03/03 15:07:20 oes * Re-enabled automatic config reloading * * Revision 1.30 2002/01/22 23:31:43 jongfoster * Replacing strsav() with string_append() * * Revision 1.29 2002/01/17 21:02:30 jongfoster * Moving all our URL and URL pattern parsing code to urlmatch.c. * * Renaming free_url to free_url_spec, since it frees a struct url_spec. * * Revision 1.28 2001/12/30 14:07:32 steudten * - Add signal handling (unix) * - Add SIGHUP handler (unix) * - Add creation of pidfile (unix) * - Add action 'top' in rc file (RH) * - Add entry 'SIGNALS' to manpage * - Add exit message to logfile (unix) * * Revision 1.27 2001/11/07 00:02:13 steudten * Add line number in error output for lineparsing for * actionsfile and configfile. * Special handling for CLF added. * * Revision 1.26 2001/11/05 21:41:43 steudten * Add changes to be a real daemon just for unix os. * (change cwd to /, detach from controlling tty, set * process group and session leader to the own process. * Add DBG() Macro. * Add some fatal-error log message for failed malloc(). * Add '-d' if compiled with 'configure --with-debug' to * enable debug output. * * Revision 1.25 2001/10/25 03:40:48 david__schmidt * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple * threads to call select() simultaneously. So, it's time to do a real, live, * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ * (native). Both versions will work, but using __OS2__ offers multi-threading. * * Revision 1.24 2001/10/23 21:40:30 jongfoster * Added support for enable-edit-actions and enable-remote-toggle config * file options. * * Revision 1.23 2001/10/07 15:36:00 oes * Introduced new config option "buffer-limit" * * Revision 1.22 2001/09/22 16:36:59 jongfoster * Removing unused parameter fs from read_config_line() * * Revision 1.21 2001/09/16 17:10:43 jongfoster * Moving function savearg() here, since it was the only thing left in * showargs.c. * * Revision 1.20 2001/07/30 22:08:36 jongfoster * Tidying up #defines: * - All feature #defines are now of the form FEATURE_xxx * - Permanently turned off WIN_GUI_EDIT * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS * * Revision 1.19 2001/07/15 17:45:16 jongfoster * Removing some unused #includes * * Revision 1.18 2001/07/13 14:01:14 oes * - Removed all #ifdef PCRS * - Removed vim-settings * * Revision 1.17 2001/06/29 13:31:03 oes * - Improved comments * - Fixed (actionsfile) and sorted hashes * - Introduced admin_address and proxy-info-url * as config parameters * - Renamed config->proxy_args_invocation (which didn't have * the invocation but the options!) to config->proxy_args * - Various adaptions * - Removed logentry from cancelled commit * * Revision 1.16 2001/06/09 10:55:28 jongfoster * Changing BUFSIZ ==> BUFFER_SIZE * * Revision 1.15 2001/06/07 23:13:40 jongfoster * Merging ACL and forward files into config file. * Cosmetic: Sorting config file options alphabetically. * Cosmetic: Adding brief syntax comments to config file options. * * Revision 1.14 2001/06/07 14:46:25 joergs * Missing make_path() added for re_filterfile. * * Revision 1.13 2001/06/05 22:33:54 jongfoster * * Fixed minor memory leak. * Also now uses make_path to prepend the pathnames. * * Revision 1.12 2001/06/05 20:04:09 jongfoster * Now uses _snprintf() in place of snprintf() under Win32. * * Revision 1.11 2001/06/04 18:31:58 swa * files are now prefixed with either `confdir' or `logdir'. * `make redhat-dist' replaces both entries confdir and logdir * with redhat values * * Revision 1.10 2001/06/03 19:11:54 oes * introduced confdir option * * Revision 1.9 2001/06/01 20:06:24 jongfoster * Removed support for "tinygif" option - moved to actions file. * * Revision 1.8 2001/05/31 21:27:13 jongfoster * Removed many options from the config file and into the * "actions" file: add_forwarded, suppress_vanilla_wafer, * wafer, add_header, user_agent, referer, from * Also globally replaced "permission" with "action". * * Revision 1.7 2001/05/29 09:50:24 jongfoster * Unified blocklist/imagelist/permissionslist. * File format is still under discussion, but the internal changes * are (mostly) done. * * Also modified interceptor behaviour: * - We now intercept all URLs beginning with one of the following * prefixes (and *only* these prefixes): * * http://i.j.b/ * * http://ijbswa.sf.net/config/ * * http://ijbswa.sourceforge.net/config/ * - New interceptors "home page" - go to http://i.j.b/ to see it. * - Internal changes so that intercepted and fast redirect pages * are not replaced with an image. * - Interceptors now have the option to send a binary page direct * to the client. (i.e. ijb-send-banner uses this) * - Implemented show-url-info interceptor. (Which is why I needed * the above interceptors changes - a typical URL is * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". * The previous mechanism would not have intercepted that, and * if it had been intercepted then it then it would have replaced * it with an image.) * * Revision 1.6 2001/05/26 00:28:36 jongfoster * Automatic reloading of config file. * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). * Most of the global variables have been moved to a new * struct configuration_spec, accessed through csp->config->globalname * Most of the globals remaining are used by the Win32 GUI. * * Revision 1.5 2001/05/25 22:34:30 jongfoster * Hard tabs->Spaces * * Revision 1.4 2001/05/22 18:46:04 oes * * - Enabled filtering banners by size rather than URL * by adding patterns that replace all standard banner * sizes with the "Junkbuster" gif to the re_filterfile * * - Enabled filtering WebBugs by providing a pattern * which kills all 1x1 images * * - Added support for PCRE_UNGREEDY behaviour to pcrs, * which is selected by the (nonstandard and therefore * capital) letter 'U' in the option string. * It causes the quantifiers to be ungreedy by default. * Appending a ? turns back to greedy (!). * * - Added a new interceptor ijb-send-banner, which * sends back the "Junkbuster" gif. Without imagelist or * MSIE detection support, or if tinygif = 1, or the * URL isn't recognized as an imageurl, a lame HTML * explanation is sent instead. * * - Added new feature, which permits blocking remote * script redirects and firing back a local redirect * to the browser. * The feature is conditionally compiled, i.e. it * can be disabled with --disable-fast-redirects, * plus it must be activated by a "fast-redirects" * line in the config file, has its own log level * and of course wants to be displayed by show-proxy-args * Note: Boy, all the #ifdefs in 1001 locations and * all the fumbling with configure.in and acconfig.h * were *way* more work than the feature itself :-( * * - Because a generic redirect template was needed for * this, tinygif = 3 now uses the same. * * - Moved GIFs, and other static HTTP response templates * to project.h * * - Some minor fixes * * - Removed some >400 CRs again (Jon, you really worked * a lot! ;-) * * Revision 1.3 2001/05/20 01:21:20 jongfoster * Version 2.9.4 checkin. * - Merged popupfile and cookiefile, and added control over PCRS * filtering, in new "permissionsfile". * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration * file error you now get a message box (in the Win32 GUI) rather * than the program exiting with no explanation. * - Made killpopup use the PCRS MIME-type checking and HTTP-header * skipping. * - Removed tabs from "config" * - Moved duplicated url parsing code in "loaders.c" to a new funcition. * - Bumped up version number. * * Revision 1.2 2001/05/17 23:01:01 oes * - Cleaned CRLF's from the sources and related files * * Revision 1.1.1.1 2001/05/15 13:58:58 oes * Initial import of version 2.9.3 source tree * * *********************************************************************/ #include "config.h" #include #include #include #include #include #include #include #include #include #ifdef _WIN32 # ifndef STRICT # define STRICT # endif # include # include "win32.h" # ifndef _WIN_CONSOLE # include "w32log.h" # endif /* ndef _WIN_CONSOLE */ #else /* ifndef _WIN32 */ #ifndef __OS2__ # include # include #endif # include # include # include #endif #include "loadcfg.h" #include "list.h" #include "jcc.h" #include "filters.h" #include "loaders.h" #include "miscutil.h" #include "errlog.h" #include "ssplit.h" #include "encode.h" #include "urlmatch.h" #include "cgi.h" #include "gateway.h" const char loadcfg_h_rcs[] = LOADCFG_H_VERSION; /* * Fix a problem with Solaris. There should be no effect on other * platforms. * Solaris's isspace() is a macro which uses it's argument directly * as an array index. Therefore we need to make sure that high-bit * characters generate +ve values, and ideally we also want to make * the argument match the declared parameter type of "int". */ #define ijb_isupper(__X) isupper((int)(unsigned char)(__X)) #define ijb_tolower(__X) tolower((int)(unsigned char)(__X)) #ifdef FEATURE_TOGGLE /* Privoxy is enabled by default. */ int global_toggle_state = 1; #endif /* def FEATURE_TOGGLE */ /* The filename of the configfile */ const char *configfile = NULL; /* * CGI functions will later need access to the invocation args, * so we will make argc and argv global. */ int Argc = 0; const char **Argv = NULL; static struct file_list *current_configfile = NULL; /* * This takes the "cryptic" hash of each keyword and aliases them to * something a little more readable. This also makes changing the * hash values easier if they should change or the hash algorthm changes. * Use the included "hash" program to find out what the hash will be * for any string supplied on the command line. (Or just put it in the * config file and read the number from the error message in the log). * * Please keep this list sorted alphabetically (but with the Windows * console and GUI specific options last). */ #define hash_actions_file 1196306641ul /* "actionsfile" */ #define hash_accept_intercepted_requests 1513024973ul /* "accept-intercepted-requests" */ #define hash_admin_address 4112573064ul /* "admin-address" */ #define hash_allow_cgi_request_crunching 258915987ul /* "allow-cgi-request-crunching" */ #define hash_buffer_limit 1881726070ul /* "buffer-limit */ #define hash_confdir 1978389ul /* "confdir" */ #define hash_debug 78263ul /* "debug" */ #define hash_deny_access 1227333715ul /* "deny-access" */ #define hash_enable_edit_actions 2517097536ul /* "enable-edit-actions" */ #define hash_enable_remote_toggle 2979744683ul /* "enable-remote-toggle" */ #define hash_enable_remote_http_toggle 110543988ul /* "enable-remote-http-toggle" */ #define hash_enforce_blocks 1862427469ul /* "enforce-blocks" */ #define hash_filterfile 250887266ul /* "filterfile" */ #define hash_forward 2029845ul /* "forward" */ #define hash_forward_socks4 3963965521ul /* "forward-socks4" */ #define hash_forward_socks4a 2639958518ul /* "forward-socks4a" */ #define hash_forward_socks5 3963965522ul /* "forward-socks5" */ #define hash_forwarded_connect_retries 101465292ul /* "forwarded-connect-retries" */ #define hash_hostname 10308071ul /* "hostname" */ #define hash_keep_alive_timeout 3878599515ul /* "keep-alive-timeout" */ #define hash_listen_address 1255650842ul /* "listen-address" */ #define hash_logdir 422889ul /* "logdir" */ #define hash_logfile 2114766ul /* "logfile" */ #define hash_permit_access 3587953268ul /* "permit-access" */ #define hash_proxy_info_url 3903079059ul /* "proxy-info-url" */ #define hash_single_threaded 4250084780ul /* "single-threaded" */ #define hash_socket_timeout 1809001761ul /* "socket-timeout" */ #define hash_split_large_cgi_forms 671658948ul /* "split-large-cgi-forms" */ #define hash_suppress_blocklists 1948693308ul /* "suppress-blocklists" */ #define hash_templdir 11067889ul /* "templdir" */ #define hash_toggle 447966ul /* "toggle" */ #define hash_trust_info_url 430331967ul /* "trust-info-url" */ #define hash_trustfile 56494766ul /* "trustfile" */ #define hash_usermanual 1416668518ul /* "user-manual" */ #define hash_activity_animation 1817904738ul /* "activity-animation" */ #define hash_close_button_minimizes 3651284693ul /* "close-button-minimizes" */ #define hash_hide_console 2048809870ul /* "hide-console" */ #define hash_log_buffer_size 2918070425ul /* "log-buffer-size" */ #define hash_log_font_name 2866730124ul /* "log-font-name" */ #define hash_log_font_size 2866731014ul /* "log-font-size" */ #define hash_log_highlight_messages 4032101240ul /* "log-highlight-messages" */ #define hash_log_max_lines 2868344173ul /* "log-max-lines" */ #define hash_log_messages 2291744899ul /* "log-messages" */ #define hash_show_on_task_bar 215410365ul /* "show-on-task-bar" */ static void savearg(char *command, char *argument, struct configuration_spec * config); /********************************************************************* * * Function : unload_configfile * * Description : Free the config structure and all components. * * Parameters : * 1 : data: struct configuration_spec to unload * * Returns : N/A * *********************************************************************/ static void unload_configfile (void * data) { struct configuration_spec * config = (struct configuration_spec *)data; struct forward_spec *cur_fwd = config->forward; int i; #ifdef FEATURE_ACL struct access_control_list *cur_acl = config->acl; while (cur_acl != NULL) { struct access_control_list * next_acl = cur_acl->next; free(cur_acl); cur_acl = next_acl; } config->acl = NULL; #endif /* def FEATURE_ACL */ while (cur_fwd != NULL) { struct forward_spec * next_fwd = cur_fwd->next; free_url_spec(cur_fwd->url); freez(cur_fwd->gateway_host); freez(cur_fwd->forward_host); free(cur_fwd); cur_fwd = next_fwd; } config->forward = NULL; freez(config->confdir); freez(config->logdir); freez(config->templdir); freez(config->hostname); freez(config->haddr); freez(config->logfile); for (i = 0; i < MAX_AF_FILES; i++) { freez(config->actions_file_short[i]); freez(config->actions_file[i]); freez(config->re_filterfile_short[i]); freez(config->re_filterfile[i]); } freez(config->admin_address); freez(config->proxy_info_url); freez(config->proxy_args); freez(config->usermanual); #ifdef FEATURE_TRUST freez(config->trustfile); list_remove_all(config->trust_info); #endif /* def FEATURE_TRUST */ for (i = 0; i < MAX_AF_FILES; i++) { freez(config->re_filterfile[i]); } freez(config); } #ifdef FEATURE_GRACEFUL_TERMINATION /********************************************************************* * * Function : unload_current_config_file * * Description : Unloads current config file - reset to state at * beginning of program. * * Parameters : None * * Returns : N/A * *********************************************************************/ void unload_current_config_file(void) { if (current_configfile) { current_configfile->unloader = unload_configfile; current_configfile = NULL; } } #endif /********************************************************************* * * Function : load_config * * Description : Load the config file and all parameters. * * XXX: more than thousand lines long * and thus in serious need of refactoring. * * Parameters : None * * Returns : The configuration_spec, or NULL on error. * *********************************************************************/ struct configuration_spec * load_config(void) { char buf[BUFFER_SIZE]; char *p, *q; FILE *configfp = NULL; struct configuration_spec * config = NULL; struct client_state * fake_csp; struct file_list *fs; unsigned long linenum = 0; int i; char *logfile = NULL; #ifdef FEATURE_CONNECTION_KEEP_ALIVE int keep_alive_timeout = DEFAULT_KEEP_ALIVE_TIMEOUT; #endif if ( !check_file_changed(current_configfile, configfile, &fs)) { /* No need to load */ return ((struct configuration_spec *)current_configfile->f); } if (!fs) { log_error(LOG_LEVEL_FATAL, "can't check configuration file '%s': %E", configfile); } if (NULL != current_configfile) { log_error(LOG_LEVEL_INFO, "Reloading configuration file '%s'", configfile); } #ifdef FEATURE_TOGGLE global_toggle_state = 1; #endif /* def FEATURE_TOGGLE */ fs->f = config = (struct configuration_spec *)zalloc(sizeof(*config)); if (config==NULL) { freez(fs->filename); freez(fs); log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ } /* * This is backwards from how it's usually done. * Following the usual pattern, "fs" would be stored in a member * variable in "csp", and then we'd access "config" from "fs->f", * using a cast. However, "config" is used so often that a * cast each time would be very ugly, and the extra indirection * would waste CPU cycles. Therefore we store "config" in * "csp->config", and "fs" in "csp->config->config_file_list". */ config->config_file_list = fs; /* * Set to defaults */ config->multi_threaded = 1; config->hport = HADDR_PORT; config->buffer_limit = 4096 * 1024; config->usermanual = strdup(USER_MANUAL_URL); config->proxy_args = strdup(""); config->forwarded_connect_retries = 0; config->socket_timeout = 300; /* XXX: Should be a macro. */ config->feature_flags &= ~RUNTIME_FEATURE_CGI_TOGGLE; config->feature_flags &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS; config->feature_flags &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; if ((configfp = fopen(configfile, "r")) == NULL) { log_error(LOG_LEVEL_FATAL, "can't open configuration file '%s': %E", configfile); /* Never get here - LOG_LEVEL_FATAL causes program exit */ } while (read_config_line(buf, sizeof(buf), configfp, &linenum) != NULL) { char cmd[BUFFER_SIZE]; char arg[BUFFER_SIZE]; char tmp[BUFFER_SIZE]; #ifdef FEATURE_ACL struct access_control_list *cur_acl; #endif /* def FEATURE_ACL */ struct forward_spec *cur_fwd; int vec_count; char *vec[3]; unsigned long directive_hash; strlcpy(tmp, buf, sizeof(tmp)); /* Copy command (i.e. up to space or tab) into cmd */ p = buf; q = cmd; while (*p && (*p != ' ') && (*p != '\t')) { *q++ = *p++; } *q = '\0'; /* Skip over the whitespace in buf */ while (*p && ((*p == ' ') || (*p == '\t'))) { p++; } /* Copy the argument into arg */ strlcpy(arg, p, sizeof(arg)); /* Should never happen, but check this anyway */ if (*cmd == '\0') { continue; } /* Make sure the command field is lower case */ for (p=cmd; *p; p++) { if (ijb_isupper(*p)) { *p = (char)ijb_tolower(*p); } } /* Save the argument for show-proxy-args */ savearg(cmd, arg, config); directive_hash = hash_string(cmd); switch (directive_hash) { /* ************************************************************************* * actionsfile actions-file-name * In confdir by default * *************************************************************************/ case hash_actions_file : i = 0; while ((i < MAX_AF_FILES) && (NULL != config->actions_file[i])) { i++; } if (i >= MAX_AF_FILES) { log_error(LOG_LEVEL_FATAL, "Too many 'actionsfile' directives in config file - limit is %d.\n" "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).", MAX_AF_FILES); } config->actions_file_short[i] = strdup(arg); config->actions_file[i] = make_path(config->confdir, arg); continue; /* ************************************************************************* * accept-intercepted-requests * *************************************************************************/ case hash_accept_intercepted_requests: if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; } else { config->feature_flags &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; } continue; /* ************************************************************************* * admin-address email-address * *************************************************************************/ case hash_admin_address : freez(config->admin_address); config->admin_address = strdup(arg); continue; /* ************************************************************************* * allow-cgi-request-crunching * *************************************************************************/ case hash_allow_cgi_request_crunching: if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_CGI_CRUNCHING; } else { config->feature_flags &= ~RUNTIME_FEATURE_CGI_CRUNCHING; } continue; /* ************************************************************************* * buffer-limit n * *************************************************************************/ case hash_buffer_limit : config->buffer_limit = (size_t)(1024 * atoi(arg)); continue; /* ************************************************************************* * confdir directory-name * *************************************************************************/ case hash_confdir : freez(config->confdir); config->confdir = make_path( NULL, arg); continue; /* ************************************************************************* * debug n * Specifies debug level, multiple values are ORed together. * *************************************************************************/ case hash_debug : config->debug |= atoi(arg); continue; /* ************************************************************************* * deny-access source-ip[/significant-bits] [dest-ip[/significant-bits]] * *************************************************************************/ #ifdef FEATURE_ACL case hash_deny_access: vec_count = ssplit(arg, " \t", vec, SZ(vec), 1, 1); if ((vec_count != 1) && (vec_count != 2)) { log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " "deny-access directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Wrong number of parameters for " "deny-access directive in configuration file.

\n"); continue; } /* allocate a new node */ cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl)); if (cur_acl == NULL) { log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ continue; } cur_acl->action = ACL_DENY; if (acl_addr(vec[0], cur_acl->src) < 0) { log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask " "for deny-access directive in configuration file: \"%s\"", vec[0]); string_append(&config->proxy_args, "
\nWARNING: Invalid source address, port or netmask " "for deny-access directive in configuration file: \""); string_append(&config->proxy_args, vec[0]); string_append(&config->proxy_args, "\"

\n"); freez(cur_acl); continue; } if (vec_count == 2) { if (acl_addr(vec[1], cur_acl->dst) < 0) { log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask " "for deny-access directive in configuration file: \"%s\"", vec[1]); string_append(&config->proxy_args, "
\nWARNING: Invalid destination address, port or netmask " "for deny-access directive in configuration file: \""); string_append(&config->proxy_args, vec[1]); string_append(&config->proxy_args, "\"

\n"); freez(cur_acl); continue; } } /* * Add it to the list. Note we reverse the list to get the * behaviour the user expects. With both the ACL and * actions file, the last match wins. However, the internal * implementations are different: The actions file is stored * in the same order as the file, and scanned completely. * With the ACL, we reverse the order as we load it, then * when we scan it we stop as soon as we get a match. */ cur_acl->next = config->acl; config->acl = cur_acl; continue; #endif /* def FEATURE_ACL */ /* ************************************************************************* * enable-edit-actions 0|1 * *************************************************************************/ #ifdef FEATURE_CGI_EDIT_ACTIONS case hash_enable_edit_actions: if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_CGI_EDIT_ACTIONS; } else { config->feature_flags &= ~RUNTIME_FEATURE_CGI_EDIT_ACTIONS; } continue; #endif /* def FEATURE_CGI_EDIT_ACTIONS */ /* ************************************************************************* * enable-remote-toggle 0|1 * *************************************************************************/ #ifdef FEATURE_TOGGLE case hash_enable_remote_toggle: if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_CGI_TOGGLE; } else { config->feature_flags &= ~RUNTIME_FEATURE_CGI_TOGGLE; } continue; #endif /* def FEATURE_TOGGLE */ /* ************************************************************************* * enable-remote-http-toggle 0|1 * *************************************************************************/ case hash_enable_remote_http_toggle: if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_HTTP_TOGGLE; } else { config->feature_flags &= ~RUNTIME_FEATURE_HTTP_TOGGLE; } continue; /* ************************************************************************* * enforce-blocks 0|1 * *************************************************************************/ case hash_enforce_blocks: #ifdef FEATURE_FORCE_LOAD if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_ENFORCE_BLOCKS; } else { config->feature_flags &= ~RUNTIME_FEATURE_ENFORCE_BLOCKS; } #else log_error(LOG_LEVEL_ERROR, "Ignoring directive 'enforce-blocks'. " "FEATURE_FORCE_LOAD is disabled, blocks will always be enforced."); #endif /* def FEATURE_FORCE_LOAD */ continue; /* ************************************************************************* * filterfile file-name * In confdir by default. * *************************************************************************/ case hash_filterfile : i = 0; while ((i < MAX_AF_FILES) && (NULL != config->re_filterfile[i])) { i++; } if (i >= MAX_AF_FILES) { log_error(LOG_LEVEL_FATAL, "Too many 'filterfile' directives in config file - limit is %d.\n" "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).", MAX_AF_FILES); } config->re_filterfile_short[i] = strdup(arg); config->re_filterfile[i] = make_path(config->confdir, arg); continue; /* ************************************************************************* * forward url-pattern (.|http-proxy-host[:port]) * *************************************************************************/ case hash_forward: vec_count = ssplit(arg, " \t", vec, SZ(vec), 1, 1); if (vec_count != 2) { log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for forward " "directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Wrong number of parameters for " "forward directive in configuration file."); continue; } /* allocate a new node */ cur_fwd = zalloc(sizeof(*cur_fwd)); if (cur_fwd == NULL) { log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ continue; } cur_fwd->type = SOCKS_NONE; /* Save the URL pattern */ if (create_url_spec(cur_fwd->url, vec[0])) { log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward " "directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Bad URL specifier for " "forward directive in configuration file."); continue; } /* Parse the parent HTTP proxy host:port */ p = vec[1]; if (strcmp(p, ".") != 0) { cur_fwd->forward_host = strdup(p); if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) { *p++ = '\0'; cur_fwd->forward_port = atoi(p); } if (cur_fwd->forward_port <= 0) { cur_fwd->forward_port = 8000; } } /* Add to list. */ cur_fwd->next = config->forward; config->forward = cur_fwd; continue; /* ************************************************************************* * forward-socks4 url-pattern socks-proxy[:port] (.|http-proxy[:port]) * *************************************************************************/ case hash_forward_socks4: vec_count = ssplit(arg, " \t", vec, SZ(vec), 1, 1); if (vec_count != 3) { log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " "forward-socks4 directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Wrong number of parameters for " "forward-socks4 directive in configuration file."); continue; } /* allocate a new node */ cur_fwd = zalloc(sizeof(*cur_fwd)); if (cur_fwd == NULL) { log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ continue; } cur_fwd->type = SOCKS_4; /* Save the URL pattern */ if (create_url_spec(cur_fwd->url, vec[0])) { log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4 " "directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Bad URL specifier for " "forward-socks4 directive in configuration file."); continue; } /* Parse the SOCKS proxy host[:port] */ p = vec[1]; if (strcmp(p, ".") != 0) { cur_fwd->gateway_host = strdup(p); if (NULL != (p = strchr(cur_fwd->gateway_host, ':'))) { *p++ = '\0'; cur_fwd->gateway_port = atoi(p); } if (cur_fwd->gateway_port <= 0) { cur_fwd->gateway_port = 1080; } } /* Parse the parent HTTP proxy host[:port] */ p = vec[2]; if (strcmp(p, ".") != 0) { cur_fwd->forward_host = strdup(p); if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) { *p++ = '\0'; cur_fwd->forward_port = atoi(p); } if (cur_fwd->forward_port <= 0) { cur_fwd->forward_port = 8000; } } /* Add to list. */ cur_fwd->next = config->forward; config->forward = cur_fwd; continue; /* ************************************************************************* * forward-socks4a url-pattern socks-proxy[:port] (.|http-proxy[:port]) * *************************************************************************/ case hash_forward_socks4a: case hash_forward_socks5: vec_count = ssplit(arg, " \t", vec, SZ(vec), 1, 1); if (vec_count != 3) { log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " "forward-socks4a directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Wrong number of parameters for " "forward-socks4a directive in configuration file."); continue; } /* allocate a new node */ cur_fwd = zalloc(sizeof(*cur_fwd)); if (cur_fwd == NULL) { log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ continue; } if (directive_hash == hash_forward_socks4a) { cur_fwd->type = SOCKS_4A; } else { cur_fwd->type = SOCKS_5; } /* Save the URL pattern */ if (create_url_spec(cur_fwd->url, vec[0])) { log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4a " "directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Bad URL specifier for " "forward-socks4a directive in configuration file."); continue; } /* Parse the SOCKS proxy host[:port] */ p = vec[1]; cur_fwd->gateway_host = strdup(p); if (NULL != (p = strchr(cur_fwd->gateway_host, ':'))) { *p++ = '\0'; cur_fwd->gateway_port = atoi(p); } if (cur_fwd->gateway_port <= 0) { cur_fwd->gateway_port = 1080; } /* Parse the parent HTTP proxy host[:port] */ p = vec[2]; if (strcmp(p, ".") != 0) { cur_fwd->forward_host = strdup(p); if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) { *p++ = '\0'; cur_fwd->forward_port = atoi(p); } if (cur_fwd->forward_port <= 0) { cur_fwd->forward_port = 8000; } } /* Add to list. */ cur_fwd->next = config->forward; config->forward = cur_fwd; continue; /* ************************************************************************* * forwarded-connect-retries n * *************************************************************************/ case hash_forwarded_connect_retries : config->forwarded_connect_retries = atoi(arg); continue; /* ************************************************************************* * hostname hostname-to-show-on-cgi-pages * *************************************************************************/ case hash_hostname : freez(config->hostname); config->hostname = strdup(arg); if (NULL == config->hostname) { log_error(LOG_LEVEL_FATAL, "Out of memory saving hostname."); } continue; /* ************************************************************************* * keep-alive-timeout timeout * *************************************************************************/ #ifdef FEATURE_CONNECTION_KEEP_ALIVE case hash_keep_alive_timeout : if (*arg != '\0') { int timeout = atoi(arg); if (0 <= timeout) { config->feature_flags |= RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; keep_alive_timeout = timeout; } else { config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; } } continue; #endif /* ************************************************************************* * listen-address [ip][:port] * *************************************************************************/ case hash_listen_address : freez(config->haddr); config->haddr = strdup(arg); continue; /* ************************************************************************* * logdir directory-name * *************************************************************************/ case hash_logdir : freez(config->logdir); config->logdir = make_path(NULL, arg); continue; /* ************************************************************************* * logfile log-file-name * In logdir by default * *************************************************************************/ case hash_logfile : if (!no_daemon) { logfile = make_path(config->logdir, arg); if (NULL == logfile) { log_error(LOG_LEVEL_FATAL, "Out of memory while creating logfile path"); } } continue; /* ************************************************************************* * permit-access source-ip[/significant-bits] [dest-ip[/significant-bits]] * *************************************************************************/ #ifdef FEATURE_ACL case hash_permit_access: vec_count = ssplit(arg, " \t", vec, SZ(vec), 1, 1); if ((vec_count != 1) && (vec_count != 2)) { log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " "permit-access directive in configuration file."); string_append(&config->proxy_args, "
\nWARNING: Wrong number of parameters for " "permit-access directive in configuration file.

\n"); continue; } /* allocate a new node */ cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl)); if (cur_acl == NULL) { log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); /* Never get here - LOG_LEVEL_FATAL causes program exit */ continue; } cur_acl->action = ACL_PERMIT; if (acl_addr(vec[0], cur_acl->src) < 0) { log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask " "for permit-access directive in configuration file: \"%s\"", vec[0]); string_append(&config->proxy_args, "
\nWARNING: Invalid source address, port or netmask for " "permit-access directive in configuration file: \""); string_append(&config->proxy_args, vec[0]); string_append(&config->proxy_args, "\"

\n"); freez(cur_acl); continue; } if (vec_count == 2) { if (acl_addr(vec[1], cur_acl->dst) < 0) { log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask " "for permit-access directive in configuration file: \"%s\"", vec[1]); string_append(&config->proxy_args, "
\nWARNING: Invalid destination address, port or netmask for " "permit-access directive in configuration file: \""); string_append(&config->proxy_args, vec[1]); string_append(&config->proxy_args, "\"

\n"); freez(cur_acl); continue; } } /* * Add it to the list. Note we reverse the list to get the * behaviour the user expects. With both the ACL and * actions file, the last match wins. However, the internal * implementations are different: The actions file is stored * in the same order as the file, and scanned completely. * With the ACL, we reverse the order as we load it, then * when we scan it we stop as soon as we get a match. */ cur_acl->next = config->acl; config->acl = cur_acl; continue; #endif /* def FEATURE_ACL */ /* ************************************************************************* * proxy-info-url url * *************************************************************************/ case hash_proxy_info_url : freez(config->proxy_info_url); config->proxy_info_url = strdup(arg); continue; /* ************************************************************************* * single-threaded * *************************************************************************/ case hash_single_threaded : config->multi_threaded = 0; continue; /* ************************************************************************* * socket-timeout numer_of_seconds * *************************************************************************/ case hash_socket_timeout : if (*arg != '\0') { int socket_timeout = atoi(arg); if (0 < socket_timeout) { config->socket_timeout = socket_timeout; } else { log_error(LOG_LEVEL_FATAL, "Invalid socket-timeout: '%s'", arg); } } continue; /* ************************************************************************* * split-large-cgi-forms * *************************************************************************/ case hash_split_large_cgi_forms : if ((*arg != '\0') && (0 != atoi(arg))) { config->feature_flags |= RUNTIME_FEATURE_SPLIT_LARGE_FORMS; } else { config->feature_flags &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS; } continue; /* ************************************************************************* * templdir directory-name * *************************************************************************/ case hash_templdir : freez(config->templdir); config->templdir = make_path(NULL, arg); continue; /* ************************************************************************* * toggle (0|1) * *************************************************************************/ #ifdef FEATURE_TOGGLE case hash_toggle : global_toggle_state = atoi(arg); continue; #endif /* def FEATURE_TOGGLE */ /* ************************************************************************* * trust-info-url url * *************************************************************************/ #ifdef FEATURE_TRUST case hash_trust_info_url : enlist(config->trust_info, arg); continue; #endif /* def FEATURE_TRUST */ /* ************************************************************************* * trustfile filename * (In confdir by default.) * *************************************************************************/ #ifdef FEATURE_TRUST case hash_trustfile : freez(config->trustfile); config->trustfile = make_path(config->confdir, arg); continue; #endif /* def FEATURE_TRUST */ /* ************************************************************************* * usermanual url * *************************************************************************/ case hash_usermanual : freez(config->usermanual); config->usermanual = strdup(arg); continue; /* ************************************************************************* * Win32 Console options: * *************************************************************************/ /* ************************************************************************* * hide-console * *************************************************************************/ #ifdef _WIN_CONSOLE case hash_hide_console : hideConsole = 1; continue; #endif /*def _WIN_CONSOLE*/ /* ************************************************************************* * Win32 GUI options: * *************************************************************************/ #if defined(_WIN32) && ! defined(_WIN_CONSOLE) /* ************************************************************************* * activity-animation (0|1) * *************************************************************************/ case hash_activity_animation : g_bShowActivityAnimation = atoi(arg); continue; /* ************************************************************************* * close-button-minimizes (0|1) * *************************************************************************/ case hash_close_button_minimizes : g_bCloseHidesWindow = atoi(arg); continue; /* ************************************************************************* * log-buffer-size (0|1) * *************************************************************************/ case hash_log_buffer_size : g_bLimitBufferSize = atoi(arg); continue; /* ************************************************************************* * log-font-name fontnane * *************************************************************************/ case hash_log_font_name : strcpy( g_szFontFaceName, arg ); continue; /* ************************************************************************* * log-font-size n * *************************************************************************/ case hash_log_font_size : g_nFontSize = atoi(arg); continue; /* ************************************************************************* * log-highlight-messages (0|1) * *************************************************************************/ case hash_log_highlight_messages : g_bHighlightMessages = atoi(arg); continue; /* ************************************************************************* * log-max-lines n * *************************************************************************/ case hash_log_max_lines : g_nMaxBufferLines = atoi(arg); continue; /* ************************************************************************* * log-messages (0|1) * *************************************************************************/ case hash_log_messages : g_bLogMessages = atoi(arg); continue; /* ************************************************************************* * show-on-task-bar (0|1) * *************************************************************************/ case hash_show_on_task_bar : g_bShowOnTaskBar = atoi(arg); continue; #endif /* defined(_WIN32) && ! defined(_WIN_CONSOLE) */ /* ************************************************************************* * Warnings about unsupported features * *************************************************************************/ #ifndef FEATURE_ACL case hash_deny_access: #endif /* ndef FEATURE_ACL */ #ifndef FEATURE_CGI_EDIT_ACTIONS case hash_enable_edit_actions: #endif /* ndef FEATURE_CGI_EDIT_ACTIONS */ #ifndef FEATURE_TOGGLE case hash_enable_remote_toggle: #endif /* ndef FEATURE_TOGGLE */ #ifndef FEATURE_ACL case hash_permit_access: #endif /* ndef FEATURE_ACL */ #ifndef FEATURE_TOGGLE case hash_toggle : #endif /* ndef FEATURE_TOGGLE */ #ifndef FEATURE_TRUST case hash_trustfile : case hash_trust_info_url : #endif /* ndef FEATURE_TRUST */ #ifndef _WIN_CONSOLE case hash_hide_console : #endif /* ndef _WIN_CONSOLE */ #if defined(_WIN_CONSOLE) || ! defined(_WIN32) case hash_activity_animation : case hash_close_button_minimizes : case hash_log_buffer_size : case hash_log_font_name : case hash_log_font_size : case hash_log_highlight_messages : case hash_log_max_lines : case hash_log_messages : case hash_show_on_task_bar : #endif /* defined(_WIN_CONSOLE) || ! defined(_WIN32) */ /* These warnings are annoying - so hide them. -- Jon */ /* log_error(LOG_LEVEL_INFO, "Unsupported directive \"%s\" ignored.", cmd); */ continue; /* *************************************************************************/ default : /* *************************************************************************/ /* * I decided that I liked this better as a warning than an * error. To change back to an error, just change log level * to LOG_LEVEL_FATAL. */ log_error(LOG_LEVEL_ERROR, "Ignoring unrecognized directive '%s' (%luul) in line %lu " "in configuration file (%s).", buf, directive_hash, linenum, configfile); string_append(&config->proxy_args, " Warning: ignored unrecognized directive above.
"); continue; /* *************************************************************************/ } /* end switch( hash_string(cmd) ) */ } /* end while ( read_config_line(...) ) */ fclose(configfp); set_debug_level(config->debug); freez(config->logfile); if (!no_daemon) { if (NULL != logfile) { config->logfile = logfile; init_error_log(Argv[0], config->logfile); } else { disable_logging(); } } #ifdef FEATURE_CONNECTION_KEEP_ALIVE if (config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) { if (config->multi_threaded) { set_keep_alive_timeout(keep_alive_timeout); } else { /* * While we could use keep-alive without multiple threads * if we didn't bother with enforcing the connection timeout, * that might make Tor users sad, even though they shouldn't * enable the single-threaded option anyway. */ config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; log_error(LOG_LEVEL_ERROR, "Config option single-threaded disables connection keep-alive."); } } #endif if (NULL == config->proxy_args) { log_error(LOG_LEVEL_FATAL, "Out of memory loading config - insufficient memory for config->proxy_args"); } if (config->actions_file[0]) { add_loader(load_action_files, config); } if (config->re_filterfile[0]) { add_loader(load_re_filterfiles, config); } #ifdef FEATURE_TRUST if (config->trustfile) { add_loader(load_trustfile, config); } #endif /* def FEATURE_TRUST */ if ( NULL == config->haddr ) { config->haddr = strdup( HADDR_DEFAULT ); } if ( NULL != config->haddr ) { if (NULL != (p = strchr(config->haddr, ':'))) { *p++ = '\0'; if (*p) { config->hport = atoi(p); } } if (config->hport <= 0) { *--p = ':'; log_error(LOG_LEVEL_FATAL, "invalid bind port spec %s", config->haddr); /* Never get here - LOG_LEVEL_FATAL causes program exit */ } if (*config->haddr == '\0') { /* * Only the port specified. We stored it in config->hport * and don't need its text representation anymore. */ freez(config->haddr); } } /* * Want to run all the loaders once now. * * Need to set up a fake csp, so they can get to the config. */ fake_csp = (struct client_state *) zalloc (sizeof(*fake_csp)); fake_csp->config = config; if (run_loader(fake_csp)) { freez(fake_csp); log_error(LOG_LEVEL_FATAL, "A loader failed while loading config file. Exiting."); /* Never get here - LOG_LEVEL_FATAL causes program exit */ } freez(fake_csp); /* FIXME: this is a kludge for win32 */ #if defined(_WIN32) && !defined (_WIN_CONSOLE) g_default_actions_file = config->actions_file[1]; /* FIXME Hope this is default.action */ g_user_actions_file = config->actions_file[2]; /* FIXME Hope this is user.action */ g_re_filterfile = config->re_filterfile[0]; /* FIXME Hope this is default.filter */ #ifdef FEATURE_TRUST g_trustfile = config->trustfile; #endif /* def FEATURE_TRUST */ #endif /* defined(_WIN32) && !defined (_WIN_CONSOLE) */ /* FIXME: end kludge */ config->need_bind = 1; if (current_configfile) { struct configuration_spec * oldcfg = (struct configuration_spec *) current_configfile->f; /* * Check if config->haddr,hport == oldcfg->haddr,hport * * The following could be written more compactly as a single, * (unreadably long) if statement. */ config->need_bind = 0; if (config->hport != oldcfg->hport) { config->need_bind = 1; } else if (config->haddr == NULL) { if (oldcfg->haddr != NULL) { config->need_bind = 1; } } else if (oldcfg->haddr == NULL) { config->need_bind = 1; } else if (0 != strcmp(config->haddr, oldcfg->haddr)) { config->need_bind = 1; } current_configfile->unloader = unload_configfile; } fs->next = files->next; files->next = fs; current_configfile = fs; return (config); } /********************************************************************* * * Function : savearg * * Description : Called from `load_config'. It saves each non-empty * and non-comment line from config into * config->proxy_args. This is used to create the * show-proxy-args page. On error, frees * config->proxy_args and sets it to NULL * * Parameters : * 1 : command = config setting that was found * 2 : argument = the setting's argument (if any) * 3 : config = Configuration to save into. * * Returns : N/A * *********************************************************************/ static void savearg(char *command, char *argument, struct configuration_spec * config) { char * buf; char * s; assert(command); assert(argument); /* * Add config option name embedded in * link to its section in the user-manual */ buf = strdup("\nusermanual, "file://", 7) || !strncmpic(config->usermanual, "http", 4)) { string_append(&buf, config->usermanual); } else { string_append(&buf, "http://" CGI_SITE_2_HOST "/user-manual/"); } string_append(&buf, CONFIG_HELP_PREFIX); string_join (&buf, string_toupper(command)); string_append(&buf, "\">"); string_append(&buf, command); string_append(&buf, " "); if (NULL == buf) { freez(config->proxy_args); return; } if ( (NULL != argument) && ('\0' != *argument) ) { s = html_encode(argument); if (NULL == s) { freez(buf); freez(config->proxy_args); return; } if (strncmpic(argument, "http://", 7) == 0) { string_append(&buf, ""); string_join (&buf, s); string_append(&buf, ""); } else { string_join (&buf, s); } } string_append(&buf, "
"); string_join(&config->proxy_args, buf); } /* Local Variables: tab-width: 3 end: */