Again, the main configuration file is named config on Linux/Unix/BSD and OS/2, and config.txt on Windows. Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example:
confdir /etc/privoxy
Assigns the value /etc/privoxy to the option confdir and thus indicates that the configuration directory is named "/etc/privoxy/".
All options in the config file except for confdir and logdir are optional. Watch out in the below description for what happens if you leave them unset.
The main config file controls all aspects of Privoxy's operation that are not location dependent (i.e. they apply universally, no matter where you may be surfing).
Privoxy can (and normally does) use a number of other files for additional configuration, help and logging. This section of the configuration file tells Privoxy where to find those other files.
The user running Privoxy, must have read permission for all configuration files, and write permission to any files that would be modified, such as log files and actions files.
The directory where the other configuration files are located
Path name
/etc/privoxy (Unix) or Privoxy installation dir (Windows)
Mandatory
No trailing "/", please
When development goes modular and multi-user, the blocker, filter, and per-user config will be stored in subdirectories of "confdir". For now, the configuration directory structure is flat, except for confdir/templates, where the HTML templates for CGI output reside (e.g. Privoxy's 404 error page).
The directory where all logging takes place (i.e. where logfile and jarfile are located)
Path name
/var/log/privoxy (Unix) or Privoxy installation dir (Windows)
Mandatory
No trailing "/", please
The actions file(s) to use
File name, relative to confdir, without the .action suffix
| standard # Internal purposes, no editing recommended |
| default # Main actions file |
| user # User customizations |
No actions are taken at all. Simple neutral proxying.
Multiple actionsfile lines are permitted, and are in fact recommended!
The default values include standard.action, which is used for internal purposes and should be loaded, default.action, which is the "main" actions file maintained by the developers, and user.action, where you can make your personal additions.
Actions files are where all the per site and per URL configuration is done for ad blocking, cookie management, privacy considerations, etc. There is no point in using Privoxy without at least one actions file.
The filter file to use
File name, relative to confdir
default.filter (Unix) or default.filter.txt (Windows)
No textual content filtering takes place, i.e. all +filter{name} actions in the actions files are turned neutral.
The filter file contains content modification rules that use regular expressions. These rules permit powerful changes on the content of Web pages, e.g., you could disable your favorite JavaScript annoyances, re-write the actual displayed text, or just have some fun replacing "Microsoft" with "MicroSuck" wherever it appears on a Web page.
The +filter{name} actions rely on the relevant filter (name) to be defined in the filter file!
A pre-defined filter file called default.filter that contains a bunch of handy filters for common problems is included in the distribution. See the section on the filter action for a list.
The log file to use
File name, relative to logdir
logfile (Unix) or privoxy.log (Windows)
No log file is used, all log messages go to the console (STDERR).
The windows version will additionally log to the console.
The logfile is where all logging and error messages are written. The level of detail and number of messages are set with the debug option (see below). The logfile can be useful for tracking down a problem with Privoxy (e.g., it's not blocking an ad you think it should block) but in most cases you probably will never look at it.
Your logfile will grow indefinitely, and you will probably want to periodically remove it. On Unix systems, you can do this with a cron job (see "man cron"). For Red Hat, a logrotate script has been included.
On SuSE Linux systems, you can place a line like "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles, with the effect that cron.daily will automatically archive, gzip, and empty the log, when it exceeds 1M size.
Any log files must be writable by whatever user Privoxy is being run as (default on UNIX, user id is "privoxy").
The file to store intercepted cookies in
File name, relative to logdir
jarfile (Unix) or privoxy.jar (Windows)
Intercepted cookies are not stored at all.
The jarfile may grow to ridiculous sizes over time.
The trust file to use
File name, relative to confdir
Unset (commented out). When activated: trust (Unix) or trust.txt (Windows)
The whole trust mechanism is turned off.
The trust mechanism is an experimental feature for building white-lists and should be used with care. It is NOT recommended for the casual user.
If you specify a trust file, Privoxy will only allow access to sites that are named in the trustfile. You can also mark sites as trusted referrers (with +), with the effect that access to untrusted sites will be granted, if a link from a trusted referrer was used. The link target will then be added to the "trustfile". Possible applications include limiting Internet access for children.
If you use + operator in the trust file, it may grow considerably over time.
If you intend to operate Privoxy for more users than just yourself, it might be a good idea to let them know how to reach you, what you block and why you do that, your policies, etc.
Location of the Privoxy User Manual.
A fully qualified URI
Unset
http://www.privoxy.org/version/user-manual/ will be used, where version is the Privoxy version.
The User Manual URI is used for help links from some of the internal CGI pages. The manual itself is normally packaged with the binary distributions, so you probably want to set this to a locally installed copy. For multi-user setups, you could provide a copy on a local webserver for all your users and use the corresponding URL here.
Examples:
Unix, in local filesystem:
user-manual file:///usr/share/doc/privoxy-2.9.15/user-manual/ |
Any platform, on local webserver (called "local-webserver"):
user-manual http://local-webserver/privoxy-user-manual/ |
| Warning |
If set, this option should be the first option in the config file, because it is used while the config file is being read. |
A URL to be displayed in the error page that users will see if access to an untrusted page is denied.
URL
Two example URL are provided
No links are displayed on the "untrusted" error page.
The value of this option only matters if the experimental trust mechanism has been activated. (See trustfile above.)
If you use the trust mechanism, it is a good idea to write up some on-line documentation about your trust policy and to specify the URL(s) here. Use multiple times for multiple URLs.
The URL(s) should be added to the trustfile as well, so users don't end up locked out from the information on why they were locked out in the first place!
An email address to reach the proxy administrator.
Email address
Unset
No email address is displayed on error pages and the CGI user interface.
If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown.
A URL to documentation about the local Privoxy setup, configuration or policies.
URL
Unset
No link to local documentation is displayed on error pages and the CGI user interface.
If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown.
This URL shouldn't be blocked ;-)
These options are mainly useful when tracing a problem. Note that you might also want to invoke Privoxy with the --no-daemon command line option when debugging.
Key values that determine what information gets logged to the logfile.
Integer values
12289 (i.e.: URLs plus informational and warning messages)
Nothing gets logged.
The available debug levels are:
debug 1 # show each GET/POST/CONNECT request debug 2 # show each connection status debug 4 # show I/O status debug 8 # show header parsing debug 16 # log all data into the logfile debug 32 # debug force feature debug 64 # debug regular expression filter debug 128 # debug fast redirects debug 256 # debug GIF de-animation debug 512 # Common Log Format debug 1024 # debug kill pop-ups debug 4096 # Startup banner and warnings. debug 8192 # Non-fatal errors |
To select multiple debug levels, you can either add them or use multiple debug lines.
A debug level of 1 is informative because it will show you each request as it happens. 1, 4096 and 8192 are highly recommended so that you will notice when things go wrong. The other levels are probably only of interest if you are hunting down a specific problem. They can produce a hell of an output (especially 16).
The reporting of fatal errors (i.e. ones which crash Privoxy) is always on and cannot be disabled.
If you want to use CLF (Common Log Format), you should set "debug 512" ONLY and not enable anything else.
Whether to run only one server thread
None
Unset
Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to serve multiple requests simultaneously.
This option is only there for debug purposes and you should never need to use it. It will drastically reduce performance.
This section of the config file controls the security-relevant aspects of Privoxy's configuration.
The IP address and TCP port on which Privoxy will listen for client requests.
[IP-Address]:Port
127.0.0.1:8118
Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for home users who run Privoxy on the same machine as their browser.
You will need to configure your browser(s) to this proxy address and port.
If you already have another service running on port 8118, or if you want to serve requests from other machines (e.g. on your local network) as well, you will need to override the default.
If you leave out the IP address, Privoxy will bind to all interfaces (addresses) on your machine and may become reachable from the Internet. In that case, consider using access control lists (ACL's, see below), and/or a firewall.
If you open Privoxy to untrusted users, you will also want to turn off the enable-edit-actions and enable-remote-toggle options!
Suppose you are running Privoxy on a machine which has the address 192.168.0.1 on your local private network (192.168.0.0) and has another outside connection with a different address. You want it to serve requests from inside only:
listen-address 192.168.0.1:8118 |
Initial state of "toggle" status
1 or 0
1
Act as if toggled on
If set to 0, Privoxy will start in "toggled off" mode, i.e. behave like a normal, content-neutral proxy where all ad blocking, filtering, etc are disabled. See enable-remote-toggle below. This is not really useful anymore, since toggling is much easier via the web interface than via editing the conf file.
The windows version will only display the toggle icon in the system tray if this option is present.
Whether or not the web-based toggle feature may be used
0 or 1
1
The web-based toggle feature is disabled.
When toggled off, Privoxy acts like a normal, content-neutral proxy, i.e. it acts as if none of the actions applied to any URL.
For the time being, access to the toggle feature can not be controlled separately by "ACLs" or HTTP authentication, so that everybody who can access Privoxy (see "ACLs" and listen-address above) can toggle it for all users. So this option is not recommended for multi-user environments with untrusted users.
Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect.
Whether or not the web-based actions file editor may be used
0 or 1
1
The web-based actions file editor is disabled.
For the time being, access to the editor can not be controlled separately by "ACLs" or HTTP authentication, so that everybody who can access Privoxy (see "ACLs" and listen-address above) can modify its configuration for all users. So this option is not recommended for multi-user environments with untrusted users.
Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect.
Who can access what.
src_addr[/src_masklen] [dst_addr[/dst_masklen]]
Where src_addr and dst_addr are IP addresses in dotted decimal notation or valid DNS names, and src_masklen and dst_masklen are subnet masks in CIDR notation, i.e. integer values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole destination part are optional.
Unset
Don't restrict access further than implied by listen-address
Access controls are included at the request of ISPs and systems administrators, and are not usually needed by individual users. For a typical home user, it will normally suffice to ensure that Privoxy only listens on the localhost (127.0.0.1) or internal (home) network address by means of the listen-address option.
Please see the warnings in the FAQ that this proxy is not intended to be a substitute for a firewall or to encourage anyone to defer addressing basic security weaknesses.
Multiple ACL lines are OK. If any ACLs are specified, then the Privoxy talks only to IP addresses that match at least one permit-access line and don't match any subsequent deny-access line. In other words, the last match wins, with the default being deny-access.
If Privoxy is using a forwarder (see forward below) for a particular destination URL, the dst_addr that is examined is the address of the forwarder and NOT the address of the ultimate target. This is necessary because it may be impossible for the local Privoxy to determine the IP address of the ultimate target (that's often what gateways are used for).
You should prefer using IP addresses over DNS names, because the address lookups take time. All DNS names must resolve! You can not use domain patterns like "*.org" or partial domain names. If a DNS name resolves to multiple IP addresses, only the first one is used.
Denying access to particular sites by ACL may have undesired side effects if the site in question is hosted on a machine which also hosts other sites.
Explicitly define the default behavior if no ACL and listen-address are set: "localhost" is OK. The absence of a dst_addr implies that all destination addresses are OK:
permit-access localhost |
Allow any host on the same class C subnet as www.privoxy.org access to nothing but www.example.com:
permit-access www.privoxy.org/24 www.example.com/32 |
Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere, with the exception that 192.168.45.73 may not access www.dirty-stuff.example.com:
permit-access 192.168.45.64/26 deny-access 192.168.45.73 www.dirty-stuff.example.com |
Maximum size of the buffer for content filtering.
Size in Kbytes
4096
Use a 4MB (4096 KB) limit.
For content filtering, i.e. the +filter and +deanimate-gif actions, it is necessary that Privoxy buffers the entire document body. This can be potentially dangerous, since a server could just keep sending data indefinitely and wait for your RAM to exhaust -- with nasty consequences. Hence this option.
When a document buffer size reaches the buffer-limit, it is flushed to the client unfiltered and no further attempt to filter the rest of the document is made. Remember that there may be multiple threads running, which might require up to buffer-limit Kbytes each, unless you have enabled "single-threaded" above.
This feature allows routing of HTTP requests through a chain of multiple proxies. It can be used to better protect privacy and confidentiality when accessing specific domains by routing requests to those domains through an anonymous public proxy (see e.g. http://www.multiproxy.org/anon_list.htm) Or to use a caching proxy to speed up browsing. Or chaining to a parent proxy may be necessary because the machine that Privoxy runs on has no direct Internet access.
Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4 and SOCKS 4A protocols.
To which parent HTTP proxy specific requests should be routed.
target_domain[:port] http_parent[/port]
Where target_domain is a domain name pattern (see the chapter on domain matching in the default.action file), http_parent is the address of the parent HTTP proxy as an IP addresses in dotted decimal notation or as a valid DNS name (or "." to denote "no forwarding", and the optional port parameters are TCP ports, i.e. integer values from 1 to 64535
Unset
Don't use parent HTTP proxies.
If http_parent is ".", then requests are not forwarded to another HTTP proxy but are made directly to the web servers.
Multiple lines are OK, they are checked in sequence, and the last match wins.
Everything goes to an example anonymizing proxy, except SSL on port 443 (which it doesn't handle):
forward .* anon-proxy.example.org:8080 forward :443 . |
Everything goes to our example ISP's caching proxy, except for requests to that ISP's sites:
forward .*. caching-proxy.example-isp.net:8000 forward .example-isp.net . |
Through which SOCKS proxy (and to which parent HTTP proxy) specific requests should be routed.
target_domain[:port] socks_proxy[/port] http_parent[/port]
Where target_domain is a domain name pattern (see the chapter on domain matching in the default.action file), http_parent and socks_proxy are IP addresses in dotted decimal notation or valid DNS names (http_parent may be "." to denote "no HTTP forwarding"), and the optional port parameters are TCP ports, i.e. integer values from 1 to 64535
Unset
Don't use SOCKS proxies.
Multiple lines are OK, they are checked in sequence, and the last match wins.
The difference between forward-socks4 and forward-socks4a is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS server, while in SOCKS 4 it happens locally.
If http_parent is ".", then requests are not forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through a SOCKS proxy.
From the company example.com, direct connections are made to all "internal" domains, but everything outbound goes through their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to the Internet.
forward-socks4a .*. socks-gw.example.com:1080 www-cache.example-isp.net:8080 forward .example.com . |
A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this:
forward-socks4 .*. socks-gw.example.com:1080 . |
If you have links to multiple ISPs that provide various special content only to their subscribers, you can configure multiple Privoxies which have connections to the respective ISPs to act as forwarders to each other, so that your users can see the internal content of all ISPs.
Assume that host-a has a PPP connection to isp-a.net. And host-b has a PPP connection to isp-b.net. Both run Privoxy. Their forwarding configuration can look like this:
host-a:
forward .*. . forward .isp-b.net host-b:8118 |
host-b:
forward .*. . forward .isp-a.net host-a:8118 |
Now, your users can set their browser's proxy to use either host-a or host-b and be able to browse the internal content of both isp-a and isp-b.
If you intend to chain Privoxy and squid locally, then chain as browser -> squid -> privoxy is the recommended way.
Assuming that Privoxy and squid run on the same box, your squid configuration could then look like this:
# Define Privoxy as parent proxy (without ICP) cache_peer 127.0.0.1 parent 8118 7 no-query # Define ACL for protocol FTP acl ftp proto FTP # Do not forward FTP requests to Privoxy always_direct allow ftp # Forward all the rest to Privoxy never_direct allow all |
You would then need to change your browser's proxy settings to squid's address and port. Squid normally uses port 3128. If unsure consult http_port in squid.conf.
Privoxy has a number of options specific to the Windows GUI interface:
If "activity-animation" is set to 1, the Privoxy icon will animate when "Privoxy" is active. To turn off, set to 0.
activity-animation 1
If "log-messages" is set to 1, Privoxy will log messages to the console window:
log-messages 1
If "log-buffer-size" is set to 1, the size of the log buffer, i.e. the amount of memory used for the log messages displayed in the console window, will be limited to "log-max-lines" (see below).
Warning: Setting this to 0 will result in the buffer to grow infinitely and eat up all your memory!
log-buffer-size 1
log-max-lines is the maximum number of lines held in the log buffer. See above.
log-max-lines 200
If "log-highlight-messages" is set to 1, Privoxy will highlight portions of the log messages with a bold-faced font:
log-highlight-messages 1
The font used in the console window:
log-font-name Comic Sans MS
Font size used in the console window:
log-font-size 8
"show-on-task-bar" controls whether or not Privoxy will appear as a button on the Task bar when minimized:
show-on-task-bar 0
If "close-button-minimizes" is set to 1, the Windows close button will minimize Privoxy instead of closing the program (close with the exit option on the File menu).
close-button-minimizes 1
The "hide-console" option is specific to the MS-Win console version of Privoxy. If this option is used, Privoxy will disconnect from and hide the command console.
#hide-console