The Main Configuration File Again, the main configuration file is named config on Linux/Unix/BSD and OS/2, and config.txt on Windows. Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example: confdir /etc/privoxy Assigns the value /etc/privoxy to the option confdir and thus indicates that the configuration directory is named /etc/privoxy/. All options in the config file except for confdir and logdir are optional. Watch out in the below description for what happens if you leave them unset. The main config file controls all aspects of Privoxy's operation that are not location dependent (i.e. they apply universally, no matter where you may be surfing). ]]> @@TITLE<!-- between the @@ is stripped by Makefile -->@@ Sample Configuration File for Privoxy v&p-version; $Id: p-config.sgml,v 2.27 2008/01/17 01:49:51 hal9 Exp $ Copyright (C) 2001-2008 Privoxy Developers http://www.privoxy.org/ ################################################################# # Table of Contents # # I. INTRODUCTION # II. FORMAT OF THE CONFIGURATION FILE # # 1. LOCAL SET-UP DOCUMENTATION # 2. CONFIGURATION AND LOG FILE LOCATIONS # 3. DEBUGGING # 4. ACCESS CONTROL AND SECURITY # 5. FORWARDING # 6. WINDOWS GUI OPTIONS # # ################################################################# I. INTRODUCTION =============== This file holds Privoxy's main configuration. Privoxy detects configuration changes automatically, so you don't have to restart it unless you want to load a different configuration file. The configuration will be reloaded with the first request after the change was done, this request itself will still use the old configuration, though. In other words: it takes two requests before you see the result of your changes. Requests that are dropped due to ACL don't trigger reloads. When starting Privoxy on Unix systems, give the location of this file as last argument. On Windows systems, Privoxy will look for this file with the name 'config.txt' in the current working directory of the Privoxy process. II. FORMAT OF THE CONFIGURATION FILE ==================================== Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example, actionsfile default.action Indicates that the actionsfile is named 'default.action'. The '#' indicates a comment. Any part of a line following a '#' is ignored, except if the '#' is preceded by a '\'. Thus, by placing a # at the start of an existing configuration line, you can make it a comment and it will be treated as if it weren't there. This is called "commenting out" an option and can be useful. Removing the # again is called "uncommenting". Note that commenting out an option and leaving it at its default are two completely different things! Most options behave very differently when unset. See the "Effect if unset" explanation in each option's description for details. Long lines can be continued on the next line by using a `\' as the last character. ]]> Local Set-up Documentation If you intend to operate Privoxy for more users than just yourself, it might be a good idea to let them know how to reach you, what you block and why you do that, your policies, etc. user-manual Specifies: Location of the Privoxy User Manual. Type of value: A fully qualified URI Default value: Unset Effect if unset: http://www.privoxy.org/version/user-manual/ will be used, where version is the Privoxy version. Notes: The User Manual URI is the single best source of information on Privoxy, and is used for help links from some of the internal CGI pages. The manual itself is normally packaged with the binary distributions, so you probably want to set this to a locally installed copy. Examples: The best all purpose solution is simply to put the full local PATH to where the User Manual is located:   user-manual  /usr/share/doc/privoxy/user-manual The User Manual is then available to anyone with access to Privoxy, by following the built-in URL: http://config.privoxy.org/user-manual/ (or the shortcut: http://p.p/user-manual/). If the documentation is not on the local system, it can be accessed from a remote server, as:   user-manual  http://example.com/privoxy/user-manual/ If set, this option should be the first option in the config file, because it is used while the config file is being read on start-up. ]]> WARNING!!!
If set, this option should be the first option in the config file, because it is used while the config file is being read.
]]> @@#user-manual http://www.privoxy.org/user-manual/]]> trust-info-url Specifies: A URL to be displayed in the error page that users will see if access to an untrusted page is denied. Type of value: URL Default value: Two example URLs are provided Effect if unset: No links are displayed on the "untrusted" error page. Notes: The value of this option only matters if the experimental trust mechanism has been activated. (See trustfile below.) If you use the trust mechanism, it is a good idea to write up some on-line documentation about your trust policy and to specify the URL(s) here. Use multiple times for multiple URLs. The URL(s) should be added to the trustfile as well, so users don't end up locked out from the information on why they were locked out in the first place! @@trust-info-url http://www.example.com/why_we_block.html]]> @@trust-info-url http://www.example.com/what_we_allow.html]]> admin-address Specifies: An email address to reach the Privoxy administrator. Type of value: Email address Default value: Unset Effect if unset: No email address is displayed on error pages and the CGI user interface. Notes: If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown. @@#admin-address privoxy-admin@example.com]]> proxy-info-url Specifies: A URL to documentation about the local Privoxy setup, configuration or policies. Type of value: URL Default value: Unset Effect if unset: No link to local documentation is displayed on error pages and the CGI user interface. Notes: If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown. This URL shouldn't be blocked ;-) @@#proxy-info-url http://www.example.com/proxy-service.html]]> Configuration and Log File Locations Privoxy can (and normally does) use a number of other files for additional configuration, help and logging. This section of the configuration file tells Privoxy where to find those other files. The user running Privoxy, must have read permission for all configuration files, and write permission to any files that would be modified, such as log files and actions files. confdir Specifies: The directory where the other configuration files are located. Type of value: Path name Default value: /etc/privoxy (Unix) or Privoxy installation dir (Windows) Effect if unset: Mandatory Notes: No trailing /, please. @@confdir .]]> templdir Specifies: An alternative directory where the templates are loaded from. Type of value: Path name Default value: unset Effect if unset: The templates are assumed to be located in confdir/template. Notes: Privoxy's original templates are usually overwritten with each update. Use this option to relocate customized templates that should be kept. As template variables might change between updates, you shouldn't expect templates to work with Privoxy releases other than the one they were part of, though. @@#templdir .]]> logdir Specifies: The directory where all logging takes place (i.e. where logfile and jarfile are located). Type of value: Path name Default value: /var/log/privoxy (Unix) or Privoxy installation dir (Windows) Effect if unset: Mandatory Notes: No trailing /, please. @@logdir .]]> actionsfile Specifies: The actions file(s) to use Type of value: Complete file name, relative to confdir Default values: standard.action # Internal purposes, no editing recommended default.action # Main actions file user.action # User customizations Effect if unset: No actions are taken at all. More or less neutral proxying. Notes: Multiple actionsfile lines are permitted, and are in fact recommended! The default values include standard.action, which is used for internal purposes and should be loaded, default.action, which is the main actions file maintained by the developers, and user.action, where you can make your personal additions. Actions files contain all the per site and per URL configuration for ad blocking, cookie management, privacy considerations, etc. There is no point in using Privoxy without at least one actions file. Note that since Privoxy 3.0.7, the complete filename, including the .action extension has to be specified. The syntax change was necessary to be consistent with the other file options and to allow previously forbidden characters. @@actionsfile standard.action # Internal purpose, recommended]]> @@actionsfile default.action # Main actions file]]> @@actionsfile user.action # User customizations]]> filterfile Specifies: The filter file(s) to use Type of value: File name, relative to confdir Default value: default.filter (Unix) or default.filter.txt (Windows) Effect if unset: No textual content filtering takes place, i.e. all +filter{name} actions in the actions files are turned neutral. Notes: Multiple filterfile lines are permitted. The filter files contain content modification rules that use regular expressions. These rules permit powerful changes on the content of Web pages, and optionally the headers as well, e.g., you could try to disable your favorite JavaScript annoyances, re-write the actual displayed text, or just have some fun playing buzzword bingo with web pages. The +filter{name} actions rely on the relevant filter (name) to be defined in a filter file! A pre-defined filter file called default.filter that contains a number of useful filters for common problems is included in the distribution. See the section on the filter action for a list. It is recommended to place any locally adapted filters into a separate file, such as user.filter. @@filterfile default.filter]]> @@#filterfile user.filter # User customizations]]> logfile Specifies: The log file to use Type of value: File name, relative to logdir Default value: Unset (commented out). When activated: logfile (Unix) or privoxy.log (Windows). Effect if unset: No logfile is written. Notes: The logfile is where all logging and error messages are written. The level of detail and number of messages are set with the debug option (see below). The logfile can be useful for tracking down a problem with Privoxy (e.g., it's not blocking an ad you think it should block) and it can help you to monitor what your browser is doing. Depending on the debug options below, the logfile may be a privacy risk if third parties can get access to it. As most users will never look at it, Privoxy 3.0.7 and later only log fatal errors by default. For most troubleshooting purposes, you will have to change that, please refer to the debugging section for details. Your logfile will grow indefinitely, and you will probably want to periodically remove it. On Unix systems, you can do this with a cron job (see man cron). For Red Hat based Linux distributions, a logrotate script has been included. Any log files must be writable by whatever user Privoxy is being run as (on Unix, default user id is privoxy). @@logfile logfile]]> jarfile Specifies: The file to store intercepted cookies in Type of value: File name, relative to logdir Default value: Unset (commented out). When activated: jarfile (Unix) or privoxy.jar (Windows). Effect if unset: Intercepted cookies are not stored in a dedicated log file. Notes: The jarfile may grow to ridiculous sizes over time. If debug 8 (show header parsing) is enabled, cookies are also written to the logfile with the rest of the headers. Therefore this option isn't very useful and may be removed in future releases. Please report to the developers if you are still using it. @@#jarfile jarfile]]> trustfile Specifies: The name of the trust file to use Type of value: File name, relative to confdir Default value: Unset (commented out). When activated: trust (Unix) or trust.txt (Windows) Effect if unset: The entire trust mechanism is disabled. Notes: The trust mechanism is an experimental feature for building white-lists and should be used with care. It is NOT recommended for the casual user. If you specify a trust file, Privoxy will only allow access to sites that are specified in the trustfile. Sites can be listed in one of two ways: Prepending a ~ character limits access to this site only (and any sub-paths within this site), e.g. ~www.example.com allows access to ~www.example.com/features/news.html, etc. Or, you can designate sites as trusted referrers, by prepending the name with a + character. The effect is that access to untrusted sites will be granted -- but only if a link from this trusted referrer was used to get there. The link target will then be added to the trustfile so that future, direct accesses will be granted. Sites added via this mechanism do not become trusted referrers themselves (i.e. they are added with a ~ designation). There is a limit of 512 such entries, after which new entries will not be made. If you use the + operator in the trust file, it may grow considerably over time. It is recommended that Privoxy be compiled with the --disable-force, --disable-toggle and --disable-editor options, if this feature is to be used. Possible applications include limiting Internet access for children. @@#trustfile trust]]> Debugging These options are mainly useful when tracing a problem. Note that you might also want to invoke Privoxy with the --no-daemon command line option when debugging. debug Specifies: Key values that determine what information gets logged. Type of value: Integer values Default value: 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged) Effect if unset: Default value is used (see above). Notes: The available debug levels are: debug 1 # log each request destination (and the crunch reason if &my-app; intercepted the request) debug 2 # show each connection status debug 4 # show I/O status debug 8 # show header parsing debug 16 # log all data written to the network into the logfile debug 32 # debug force feature debug 64 # debug regular expression filters debug 128 # debug redirects debug 256 # debug GIF de-animation debug 512 # Common Log Format debug 1024 # debug kill pop-ups debug 2048 # CGI user interface debug 4096 # Startup banner and warnings. debug 8192 # Non-fatal errors To select multiple debug levels, you can either add them or use multiple debug lines. A debug level of 1 is informative because it will show you each request as it happens. 1, 4096 and 8192 are recommended so that you will notice when things go wrong. The other levels are probably only of interest if you are hunting down a specific problem. They can produce a hell of an output (especially 16). &my-app; used to ship with the debug levels recommended above enabled by default, but due to privacy concerns 3.0.7 and later are configured to only log fatal errors. If you are used to the more verbose settings, simply enable the debug lines below again. If you want to use pure CLF (Common Log Format), you should set debug 512 ONLY and not enable anything else. Privoxy has a hard-coded limit for the length of log messages. If it's reached, messages are logged truncated and marked with ... [too long, truncated]. Please don't file any support requests without trying to reproduce the problem with increased debug level first. Once you read the log messages, you may even be able to solve the problem on your own. @@#debug 1 # log each request destination (and the crunch reason if &my-app; intercepted the request)]]> @@#debug 4096 # Startup banner and warnings]]> @@#debug 8192 # Non-fatal errors]]> single-threaded Specifies: Whether to run only one server thread. Type of value: None Default value: Unset Effect if unset: Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to serve multiple requests simultaneously. Notes: This option is only there for debugging purposes. It will drastically reduce performance. @@#single-threaded]]> Access Control and Security This section of the config file controls the security-relevant aspects of Privoxy's configuration. listen-address Specifies: The IP address and TCP port on which Privoxy will listen for client requests. Type of value: [IP-Address]:Port Default value: 127.0.0.1:8118 Effect if unset: Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for home users who run Privoxy on the same machine as their browser. Notes: You will need to configure your browser(s) to this proxy address and port. If you already have another service running on port 8118, or if you want to serve requests from other machines (e.g. on your local network) as well, you will need to override the default. If you leave out the IP address, Privoxy will bind to all interfaces (addresses) on your machine and may become reachable from the Internet. In that case, consider using access control lists (ACL's, see below), and/or a firewall. If you open Privoxy to untrusted users, you will also want to make sure that the following actions are disabled: enable-edit-actions and enable-remote-toggle Example: Suppose you are running Privoxy on a machine which has the address 192.168.0.1 on your local private network (192.168.0.0) and has another outside connection with a different address. You want it to serve requests from inside only: listen-address 192.168.0.1:8118 @@listen-address 127.0.0.1:8118]]> toggle Specifies: Initial state of "toggle" status Type of value: 1 or 0 Default value: 1 Effect if unset: Act as if toggled on Notes: If set to 0, Privoxy will start in toggled off mode, i.e. mostly behave like a normal, content-neutral proxy with both ad blocking and content filtering disabled. See enable-remote-toggle below. The windows version will only display the toggle icon in the system tray if this option is present. @@toggle 1]]> enable-remote-toggle Specifies: Whether or not the web-based toggle feature may be used Type of value: 0 or 1 Default value: 0 Effect if unset: The web-based toggle feature is disabled. Notes: When toggled off, Privoxy mostly acts like a normal, content-neutral proxy, i.e. doesn't block ads or filter content. Access to the toggle feature can not be controlled separately by ACLs or HTTP authentication, so that everybody who can access Privoxy (see ACLs and listen-address above) can toggle it for all users. So this option is not recommended for multi-user environments with untrusted users. Note that malicious client side code (e.g Java) is also capable of using this option. As a lot of Privoxy users don't read documentation, this feature is disabled by default. Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect. @@enable-remote-toggle 0]]> enable-remote-http-toggle Specifies: Whether or not Privoxy recognizes special HTTP headers to change its behaviour. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy ignores special HTTP headers. Notes: When toggled on, the client can change Privoxy's behaviour by setting special HTTP headers. Currently the only supported special header is X-Filter: No, to disable filtering for the ongoing request, even if it is enabled in one of the action files. This feature is disabled by default. If you are using Privoxy in a environment with trusted clients, you may enable this feature at your discretion. Note that malicious client side code (e.g Java) is also capable of using this feature. This option will be removed in future releases as it has been obsoleted by the more general header taggers. @@enable-remote-http-toggle 0]]> enable-edit-actions Specifies: Whether or not the web-based actions file editor may be used Type of value: 0 or 1 Default value: 0 Effect if unset: The web-based actions file editor is disabled. Notes: Access to the editor can not be controlled separately by ACLs or HTTP authentication, so that everybody who can access Privoxy (see ACLs and listen-address above) can modify its configuration for all users. This option is not recommended for environments with untrusted users and as a lot of Privoxy users don't read documentation, this feature is disabled by default. Note that malicious client side code (e.g Java) is also capable of using the actions editor and you shouldn't enable this options unless you understand the consequences and are sure your browser is configured correctly. Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect. @@enable-edit-actions 0]]> enforce-blocks Specifies: Whether the user is allowed to ignore blocks and can go there anyway. Type of value: 0 or 1 Default value: 0 Effect if unset: Blocks are not enforced. Notes: Privoxy is mainly used to block and filter requests as a service to the user, for example to block ads and other junk that clogs the pipes. Privoxy's configuration isn't perfect and sometimes innocent pages are blocked. In this situation it makes sense to allow the user to enforce the request and have Privoxy ignore the block. In the default configuration Privoxy's Blocked page contains a go there anyway link to adds a special string (the force prefix) to the request URL. If that link is used, Privoxy will detect the force prefix, remove it again and let the request pass. Of course Privoxy can also be used to enforce a network policy. In that case the user obviously should not be able to bypass any blocks, and that's what the enforce-blocks option is for. If it's enabled, Privoxy hides the go there anyway link. If the user adds the force prefix by hand, it will not be accepted and the circumvention attempt is logged. Examples: enforce-blocks 1 @@enforce-blocks 0]]> ACLs: permit-access and deny-access Specifies: Who can access what. Type of value: src_addr[/src_masklen] [dst_addr[/dst_masklen]] Where src_addr and dst_addr are IP addresses in dotted decimal notation or valid DNS names, and src_masklen and dst_masklen are subnet masks in CIDR notation, i.e. integer values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole destination part are optional. Default value: Unset Effect if unset: Don't restrict access further than implied by listen-address Notes: Access controls are included at the request of ISPs and systems administrators, and are not usually needed by individual users. For a typical home user, it will normally suffice to ensure that Privoxy only listens on the localhost (127.0.0.1) or internal (home) network address by means of the listen-address option. Please see the warnings in the FAQ that Privoxy is not intended to be a substitute for a firewall or to encourage anyone to defer addressing basic security weaknesses. Multiple ACL lines are OK. If any ACLs are specified, Privoxy only talks to IP addresses that match at least one permit-access line and don't match any subsequent deny-access line. In other words, the last match wins, with the default being deny-access. If Privoxy is using a forwarder (see forward below) for a particular destination URL, the dst_addr that is examined is the address of the forwarder and NOT the address of the ultimate target. This is necessary because it may be impossible for the local Privoxy to determine the IP address of the ultimate target (that's often what gateways are used for). You should prefer using IP addresses over DNS names, because the address lookups take time. All DNS names must resolve! You can not use domain patterns like *.org or partial domain names. If a DNS name resolves to multiple IP addresses, only the first one is used. Denying access to particular sites by ACL may have undesired side effects if the site in question is hosted on a machine which also hosts other sites (most sites are). Examples: Explicitly define the default behavior if no ACL and listen-address are set: localhost is OK. The absence of a dst_addr implies that all destination addresses are OK: permit-access localhost Allow any host on the same class C subnet as www.privoxy.org access to nothing but www.example.com (or other domains hosted on the same system): permit-access www.privoxy.org/24 www.example.com/32 Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere, with the exception that 192.168.45.73 may not access the IP address behind www.dirty-stuff.example.com: permit-access 192.168.45.64/26 deny-access 192.168.45.73 www.dirty-stuff.example.com buffer-limit Specifies: Maximum size of the buffer for content filtering. Type of value: Size in Kbytes Default value: 4096 Effect if unset: Use a 4MB (4096 KB) limit. Notes: For content filtering, i.e. the +filter and +deanimate-gif actions, it is necessary that Privoxy buffers the entire document body. This can be potentially dangerous, since a server could just keep sending data indefinitely and wait for your RAM to exhaust -- with nasty consequences. Hence this option. When a document buffer size reaches the buffer-limit, it is flushed to the client unfiltered and no further attempt to filter the rest of the document is made. Remember that there may be multiple threads running, which might require up to buffer-limit Kbytes each, unless you have enabled single-threaded above. @@buffer-limit 4096]]> Forwarding This feature allows routing of HTTP requests through a chain of multiple proxies. Forwarding can be used to chain Privoxy with a caching proxy to speed up browsing. Using a parent proxy may also be necessary if the machine that Privoxy runs on has no direct Internet access. Note that parent proxies can severely decrease your privacy level. For example a parent proxy could add your IP address to the request headers and if it's a caching proxy it may add the Etag header to revalidation requests again, even though you configured Privoxy to remove it. It may also ignore Privoxy's header time randomization and use the original values which could be used by the server as cookie replacement to track your steps between visits. Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4 and SOCKS 4A protocols. forward Specifies: To which parent HTTP proxy specific requests should be routed. Type of value: target_pattern http_parent[:port] where target_pattern is a URL pattern that specifies to which requests (i.e. URLs) this forward rule shall apply. Use / to denote all URLs. http_parent[:port] is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded, optionally followed by its listening port (default: 8080). Use a single dot (.) to denote no forwarding. Default value: Unset Effect if unset: Don't use parent HTTP proxies. Notes: If http_parent is ., then requests are not forwarded to another HTTP proxy but are made directly to the web servers. Multiple lines are OK, they are checked in sequence, and the last match wins. Examples: Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle): forward / parent-proxy.example.org:8080 forward :443 . Everything goes to our example ISP's caching proxy, except for requests to that ISP's sites: forward / caching-proxy.isp.example.net:8000 forward .isp.example.net . forward-socks4, forward-socks4a and forward-socks5 Specifies: Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed. Type of value: target_pattern socks_proxy[:port] http_parent[:port] where target_pattern is a URL pattern that specifies to which requests (i.e. URLs) this forward rule shall apply. Use / to denote all URLs. http_parent and socks_proxy are IP addresses in dotted decimal notation or valid DNS names (http_parent may be . to denote no HTTP forwarding), and the optional port parameters are TCP ports, i.e. integer values from 1 to 65535 Default value: Unset Effect if unset: Don't use SOCKS proxies. Notes: Multiple lines are OK, they are checked in sequence, and the last match wins. The difference between forward-socks4 and forward-socks4a is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS server, while in SOCKS 4 it happens locally. With forward-socks5 the DNS resolution will happen on the remote server as well. If http_parent is ., then requests are not forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through a SOCKS proxy. Examples: From the company example.com, direct connections are made to all internal domains, but everything outbound goes through their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to the Internet. forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 forward .example.com . A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this: forward-socks4 / socks-gw.example.com:1080 . To chain Privoxy and Tor, both running on the same system, you would use something like: forward-socks4a / 127.0.0.1:9050 . The public Tor network can't be used to reach your local network, if you need to access local servers you therefore might want to make some exceptions: forward 192.168.*.*/ . forward 10.*.*.*/ . forward 127.*.*.*/ . Unencrypted connections to systems in these address ranges will be as (un)secure as the local network is, but the alternative is that you can't reach the local network through Privoxy at all. Of course this may actually be desired and there is no reason to make these exceptions if you aren't sure you need them. If you also want to be able to reach servers in your local network by using their names, you will need additional exceptions that look like this: forward localhost/ . Advanced Forwarding Examples If you have links to multiple ISPs that provide various special content only to their subscribers, you can configure multiple Privoxies which have connections to the respective ISPs to act as forwarders to each other, so that your users can see the internal content of all ISPs. Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to isp-b.example.org. Both run Privoxy. Their forwarding configuration can look like this: host-a: forward / . forward .isp-b.example.net host-b:8118 host-b: forward / . forward .isp-a.example.org host-a:8118 Now, your users can set their browser's proxy to use either host-a or host-b and be able to browse the internal content of both isp-a and isp-b. If you intend to chain Privoxy and squid locally, then chaining as browser -> squid -> privoxy is the recommended way. Assuming that Privoxy and squid run on the same box, your squid configuration could then look like this: # Define Privoxy as parent proxy (without ICP) cache_peer 127.0.0.1 parent 8118 7 no-query # Define ACL for protocol FTP acl ftp proto FTP # Do not forward FTP requests to Privoxy always_direct allow ftp # Forward all the rest to Privoxy never_direct allow all You would then need to change your browser's proxy settings to squid's address and port. Squid normally uses port 3128. If unsure consult http_port in squid.conf. You could just as well decide to only forward requests you suspect of leading to Windows executables through a virus-scanning parent proxy, say, on antivir.example.com, port 8010: forward / . forward /.*\.(exe|com|dll|zip)$ antivir.example.com:8010 ]]> forwarded-connect-retries Specifies: How often Privoxy retries if a forwarded connection request fails. Type of value: Number of retries. Default value: 0 Effect if unset: Connections forwarded through other proxies are treated like direct connections and no retry attempts are made. Notes: forwarded-connect-retries is mainly interesting for socks4a connections, where Privoxy can't detect why the connections failed. The connection might have failed because of a DNS timeout in which case a retry makes sense, but it might also have failed because the server doesn't exist or isn't reachable. In this case the retry will just delay the appearance of Privoxy's error message. Note that in the context of this option, forwarded connections includes all connections that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method. Only use this option, if you are getting lots of forwarding-related error messages that go away when you try again manually. Start with a small value and check Privoxy's logfile from time to time, to see how many retries are usually needed. Examples: forwarded-connect-retries 1 @@forwarded-connect-retries 0]]> accept-intercepted-requests Specifies: Whether intercepted requests should be treated as valid. Type of value: 0 or 1 Default value: 0 Effect if unset: Only proxy requests are accepted, intercepted requests are treated as invalid. Notes: If you don't trust your clients and want to force them to use Privoxy, enable this option and configure your packet filter to redirect outgoing HTTP connections into Privoxy. Make sure that Privoxy's own requests aren't redirected as well. Additionally take care that Privoxy can't intentionally connect to itself, otherwise you could run into redirection loops if Privoxy's listening port is reachable by the outside or an attacker has access to the pages you visit. Examples: accept-intercepted-requests 1 @@accept-intercepted-requests 0]]> allow-cgi-request-crunching Specifies: Whether requests to Privoxy's CGI pages can be blocked or redirected. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy ignores block and redirect actions for its CGI pages. Notes: By default Privoxy ignores block or redirect actions for its CGI pages. Intercepting these requests can be useful in multi-user setups to implement fine-grained access control, but it can also render the complete web interface useless and make debugging problems painful if done without care. Don't enable this option unless you're sure that you really need it. Examples: allow-cgi-request-crunching 1 @@allow-cgi-request-crunching 0]]> split-large-forms Specifies: Whether the CGI interface should stay compatible with broken HTTP clients. Type of value: 0 or 1 Default value: 0 Effect if unset: The CGI form generate long GET URLs. Notes: Privoxy's CGI forms can lead to rather long URLs. This isn't a problem as far as the HTTP standard is concerned, but it can confuse clients with arbitrary URL length limitations. Enabling split-large-forms causes Privoxy to divide big forms into smaller ones to keep the URL length down. It makes editing a lot less convenient and you can no longer submit all changes at once, but at least it works around this browser bug. If you don't notice any editing problems, there is no reason to enable this option, but if one of the submit buttons appears to be broken, you should give it a try. Examples: split-large-forms 1 @@split-large-forms 0]]> Windows GUI Options Privoxy has a number of options specific to the Windows GUI interface: @@]]> If activity-animation is set to 1, the Privoxy icon will animate when Privoxy is active. To turn off, set to 0. @@#activity-animation 1]]> activity-animation 1 ]]> @@]]> If log-messages is set to 1, Privoxy will log messages to the console window: @@#log-messages 1]]> log-messages 1 ]]> @@]]> If log-buffer-size is set to 1, the size of the log buffer, i.e. the amount of memory used for the log messages displayed in the console window, will be limited to log-max-lines (see below). Warning: Setting this to 0 will result in the buffer to grow infinitely and eat up all your memory! @@#log-buffer-size 1]]> log-buffer-size 1 ]]> @@]]> log-max-lines is the maximum number of lines held in the log buffer. See above. @@#log-max-lines 200]]> log-max-lines 200 ]]> @@]]> If log-highlight-messages is set to 1, Privoxy will highlight portions of the log messages with a bold-faced font: @@#log-highlight-messages 1]]> log-highlight-messages 1 ]]> @@]]> The font used in the console window: @@#log-font-name Comic Sans MS]]> log-font-name Comic Sans MS ]]> @@]]> Font size used in the console window: @@#log-font-size 8]]> log-font-size 8 ]]> @@]]> show-on-task-bar controls whether or not Privoxy will appear as a button on the Task bar when minimized: @@#show-on-task-bar 0]]> show-on-task-bar 0 ]]> @@]]> If close-button-minimizes is set to 1, the Windows close button will minimize Privoxy instead of closing the program (close with the exit option on the File menu). @@#close-button-minimizes 1]]> close-button-minimizes 1 ]]> @@]]> The hide-console option is specific to the MS-Win console version of Privoxy. If this option is used, Privoxy will disconnect from and hide the command console. @@#hide-console]]> #hide-console ]]> ]]>