# Note:  Makefile is built automatically from Makefile.in
#
# $Id: GNUmakefile.in,v 1.64 2002/04/04 22:14:51 oes Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
# by and Copyright (C) 1997 Anonymous Coders and 
# Junkbusters Corporation.  http://www.junkbusters.com
#
# This program is free software; you can redistribute it 
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will
# be useful, but WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.  See the GNU General Public
# License for more details.
#
# The GNU General Public License should be included with
# this file.  If not, you can view it at
# http://www.gnu.org/copyleft/gpl.html
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
#

#############################################################################
# Set make command correctly
#############################################################################
@SET_MAKE@

#############################################################################
# Version number (for RPM)
#############################################################################

VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
VERSION_POINT = @VERSION_POINT@
CODE_STATUS   = @CODE_STATUS@
VERSION       = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
RPM_VERSION   = $(VERSION)
RPM_PACKAGEV  = @VERSION_RPM_PACKAGE@


#############################################################################
# Directories for "make install"
#############################################################################

DEST        = @prefix@
CONFDEST    = @prefix@@sysconfdir@
SBIN_DEST   = @prefix@@sbindir@
MAN_DEST    = @prefix@@mandir@


#############################################################################
# Build tools
#############################################################################

PROGRAM    = privoxy@EXEEXT@
CC         = @CC@
ECHO       = echo
GZIP_PROG  = gzip
#INSTALL    = cp -f
INSTALL    = @INSTALL@
INSTALL_P  = -m 0750 -g @GROUP@ -o @USER@ -b
INSTALL_T  = -m 0640 -g @GROUP@ -o @USER@ -b
INSTALL_D  = -m 0750 -g @GROUP@ -o @USER@ -d
LD         = @CC@
RM         = rm -f
STRIP_PROG = strip
SED	   = sed
CAT        = cat
RPM        = rpm
MV	   = mv
TAR        = tar
LN         = ln
WDUMP      = @WDUMP@ -dump
JADECAT    = @JADECAT@
JADEBIN    = @JADEBIN@
DB         = $(JADEBIN) $(JADECAT) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
DB2HTML    = @DB2HTML@
DKPREFIX   = @DKPREFIX@
MAN2HTML   = @MAN2HTML@
G2H_CMD    = groff -mandoc -Thtml
TARGET_OS  = @host@

#User Group paras
USER       = @USER@
GROUP	   = @GROUP@

# Program to do LF->CRLF
#
# The sed version should be the most portable, but it doesn't for for me,
# the other two do.  FIXME.
#   - Jon
#DOSFILTER  = $(SED) -e $$'s,$$,\r,'
#DOSFILTER  = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER  = perl -p -e 's/\n/\r\n/'

#############################################################################
# Setup for make distribution rh and suse for now 
#############################################################################

TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
RPM_BASE = @RPM_BASE@

#############################################################################
# We include these files in our distributions
#############################################################################
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
CONFIG_FILES = config trust \
		default.action \
		basic.action intermediate.action advanced.action \
		default.filter \
		`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`

DOC_FILES = AUTHORS LICENSE README ChangeLog \
		`find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` privoxy.1

#############################################################################
# Filenames and libraries
#############################################################################

C_SRC  = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
         errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
         list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
         urlmatch.c

C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h

W32_SRC   = @WIN_ONLY@w32log.c w32taskbar.c win32.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS  = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
W32_HDRS  = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
W32_LIB   = @WIN_ONLY@-lwsock32 -lcomctl32
W32_INIS  = @WIN_ONLY@config.txt trust.txt

PCRS_SRC     = @STATIC_PCRS_ONLY@pcrs.c
PCRS_OBJS    = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
PCRS_HDRS    = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)

PCRE_SRC     = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
PCRE_OBJS    = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
PCRE_HDRS    = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h

# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC    =
@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c

REGEX_OBJS   = $(REGEX_SRC:.c=.@OBJEXT@)
REGEX_HDRS   = $(REGEX_SRC:.c=.h)

# Dependencies introduced by #include "project.h".
PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h

# Socket libraries for platforms that need them explicitly defined
SOCKET_LIB   = @SOCKET_LIB@

# PThreads library, if needed.
PTHREAD_LIB  = @PTHREAD_ONLY@@PTHREAD_LIB@

SRCS         = $(C_SRC)  $(W32_SRC)  $(PCRS_SRC)  $(PCRE_SRC)  $(REGEX_SRC)
OBJS         = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
HDRS         = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
LIBS         = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)


#############################################################################
# Compiler switches
#############################################################################

# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
# Win32 GUI build.
# The flag "-pthread" is required if using Pthreads under Linux (and
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@

# Add your flags here 
OTHER_CFLAGS =   

CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
         @STATIC_PCRE_ONLY@ -Ipcre 

LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)


#############################################################################
# Build section.
#
# There should NOT be any targets above this line.
#############################################################################
all: $(PROGRAM)


#############################################################################
# Phony targets
#############################################################################
.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
install


#############################################################################
# Define this explicitly because Solaris is broken!
#############################################################################
%.o: %.c
	$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@


#############################################################################
# Win32 config files
#############################################################################

inifiles: $(W32_INIS)

config.txt: config
	$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
	       -e 's!\jarfile jarfile!jarfile jar.log!' \
	       -e 's!\logfile logfile!logfile privoxy.log!' \
	       -e 's!#Win32-only: !!' \
	       < $< | \
	       $(DOSFILTER) > $@
	# LF to CRLF in default.action
	$(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
	# LF to CRLF in default.filter
	$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter

trust.txt: trust
	$(DOSFILTER) < $< > $@ 

re_filterfile.txt: re_filterfile
	$(DOSFILTER) < $< > $@ 

#############################################################################
# RPM specifice stuff (SuSE or Redhat, ..)
#############################################################################
rpm-stuff: clean clobber
	for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
		if [ ! -w $(RPM_BASE)/$$dir ]; then \
			$(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
			$(ECHO) "Or add a suitable path to .rpmmacros like."; \
			$(ECHO) "%_topdir /home/foo/rpm-build"; \
			exit 1; \
		fi; \
	done; \

#############################################################################
# redhat distribution alpha and x86
#############################################################################
redhat-dist: rpm-stuff
	TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
	if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
             -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
              privoxy-rh.spec > $$TMPFILE ; then \
	$(MV) -f $$TMPFILE privoxy-rh.spec; \
	else \
		$(ECHO) "Could not set version info in specfile."; \
	exit 1;\
	fi

	$(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
	$(RPM) --clean -ta  $(TAR_ARCH)
	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi

# anonymously ncftps the rpms to sourceforge
redhat-upload:
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
	@$(ECHO) -------------------------------------------------------
	@$(ECHO) Now goto
	@$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
	@$(ECHO) ... and release the files.
	@$(ECHO) -------------------------------------------------------
     # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118

#############################################################################
# suse distribution. works fine. no need to be root. 
#############################################################################
suse-dist: rpm-stuff
	TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
	if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
             -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
              privoxy-suse.spec > $$TMPFILE ; then \
	$(MV) -f $$TMPFILE privoxy-suse.spec; \
	else \
		$(ECHO) "Could not set version info in specfile."; \
	exit 1;\
	fi

	$(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
	$(RPM) --clean -ta  $(TAR_ARCH)
	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi

# anonymously ncftps the rpms to sourceforge
suse-upload:
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
	@$(ECHO) -------------------------------------------------------
	@$(ECHO) Now goto
	@$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
	@$(ECHO) ... and release the files.
	@$(ECHO) -------------------------------------------------------

# handle with care. use with root.
suse-clean:
	rpm -e junkbuster-suse || true
	rm -rf /etc/junkbuster
	rm -rf /etc/rc.d/junkbuster*
	rm -rf /var/run/junkbuster.pid 
	rm -rf /var/log/junkbuster
	rm -f /etc/init.d/junkbuster
	rm -f /usr/sbin/junkbuster
	rm -f /usr/sbin/rcjunkbuster
	rm -f /usr/share/man/man1/junkbuster.1.gz
	rpm -e privoxy-suse || true
	rm -rf /etc/privoxy
	rm -rf /etc/rc.d/privoxy*
	rm -rf /var/run/privoxy.pid 
	rm -rf /var/log/privoxy
	rm -f /etc/init.d/privoxy
	rm -f /usr/sbin/privoxy
	rm -f /usr/sbin/rcprivoxy
	rm -f /usr/share/man/man1/privoxy.1.gz

#############################################################################
# generic distribution
#############################################################################
gen-dist:
	@$(ECHO) ""
	@$(ECHO) "You have run autoconf && autoheader && ./configure right?"
	@$(ECHO) ""
	$(MAKE) $(PROGRAM)
	$(STRIP_PROG) $(PROGRAM)
	$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
# add program
	(cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
# add config files
	for foo in $(CONFIG_FILES); do \
		(cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done; 
# add documentation
	for foo in $(DOC_FILES); do \
		(cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done;
# and zip the archive
	$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
	$(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
	@$(ECHO) Distribution with binary created.

# anonymously ncftps the package to sourceforge
gen-upload:
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
	@$(ECHO) -------------------------------------------------------
	@$(ECHO) Now goto
	@$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
	@$(ECHO) ... and release the files.
	@$(ECHO) -------------------------------------------------------

# use with care
gen-clean:
	$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*

#############################################################################
# solaris distribution. verified on SF machines by swa.
#############################################################################
solaris-dist: gen-dist
	@$(ECHO) Done.
# anonymously ncftps the package to sourceforge
solaris-upload: gen-upload
	@$(ECHO) Done.
# use with care
solaris-clean: gen-clean
	@$(ECHO) Done.

#############################################################################
# hpux distribution
#############################################################################
hpux-dist:
	@$(ECHO) coming soon. 
hpux-upload:
	@$(ECHO) coming soon. 

#############################################################################
# debian distribution
#############################################################################
debian-dist:
	@$(ECHO) coming soon. 
debian-upload:
	@$(ECHO) coming soon. 

#############################################################################
# macosx distribution
#############################################################################
macosx-dist:
	@$(ECHO) coming soon. 
macosx-upload:
	@$(ECHO) coming soon. 

#############################################################################
# amiga distribution
#############################################################################
amiga-dist:
	@$(ECHO) coming soon. 
amiga-upload:
	@$(ECHO) coming soon. 

#############################################################################
# freebsd distribution. verified on SF machines by swa.
#############################################################################
freebsd-dist: gen-dist
	@$(ECHO) Done.
# anonymously ncftps the package to sourceforge
freebsd-upload: gen-upload
	@$(ECHO) Done.
# use with care
freebsd-clean: gen-clean
	@$(ECHO) Done.

#############################################################################
# Windows distribution
#############################################################################
win-dist:
	$(ECHO) Not implemented.


#############################################################################
# Tarball distribution. Only source files. No binaries.
#############################################################################

MISC_FILES = install-sh config.sub configure.in GNUmakefile.in config.h.in config.guess privoxy*

tarball-dist:
	$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
# add source files
	for foo in `find . -name "*.c"`; do \
		(cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done; 
# add header files
	for foo in `find . -name "*.h"`; do \
		(cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done; 
# add config files
	for foo in $(CONFIG_FILES); do \
		(cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done; 
# add misc files
	for foo in $(MISC_FILES); do \
		(cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done; 
# add documentation
	for foo in $(DOC_FILES); do \
		(cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
	done;
# and zip the archive
	$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
	$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
	@$(ECHO) Tarball distribution created.

# anonymously ncftps the tarball to sourceforge
tarball-upload:
	ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
	@$(ECHO) -------------------------------------------------------
	@$(ECHO) Now goto
	@$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
	@$(ECHO) ... and release the files.
	@$(ECHO) -------------------------------------------------------

# handle with care
tarball-clean:
	$(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz

#############################################################################
#
# Documentation
#
# converts doc/source/*.sgml into html, text and man pages
#
#############################################################################

# our style file
doc/source/ldpOK.dsl:
	if [ "$(DKPREFIX)" != "none" ]; then \
		sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
	else \
		cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
	fi

# Otherwise we get plain groff conversion.
groff2html:
	$(G2H_CMD) ./privoxy.1 > doc/webserver/man-page/privoxy-man-page.html

# developer manual
dok-devel: doc/source/ldpOK.dsl
	rm -rf doc/webserver/developer-manual doc/source/developer-manual
	mkdir -p doc/text doc/source/developer-manual
	cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && mv developer-manual ../webserver
	cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual

# user manual
dok-user: doc/source/ldpOK.dsl
	rm -rf doc/webserver/user-manual doc/source/user-manual
	mkdir -p doc/text doc/source/user-manual
	cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && mv user-manual ../webserver
	cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual

# faq
dok-faq: doc/source/ldpOK.dsl
	rm -rf doc/webserver/faq doc/source/faq
	mkdir -p doc/text doc/source/faq
	cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
	cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq

# man page
dok-man: doc/source/ldpOK.dsl
	rm -rf doc/man doc/webserver/man-page
	mkdir -p doc/man -p doc/webserver/man-page
	if [ "$(MAN2HTML)" != "false" ]; then \
		$(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
		man ./privoxy.1 | $(MAN2HTML) -bare \
		 >> doc/webserver/man-page/privoxy-man-page.html; \
		$(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
     else \
          $(MAKE) groff2html; \
	fi

# readme page
dok-readme: doc/source/ldpOK.dsl
	cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\
	$(WDUMP) tmp.html > ../../README && rm -rf tmp.html

dok: dok-devel dok-user dok-faq dok-man dok-readme
# kludge to force recreation on next run. Rodgrigo?
	@rm -f doc/source/ldpOK.dsl
	@$(ECHO) Documentation created.

#
# an alternative to the above dok
#
redhat-dok: doc/source/ldpOK.dsl man2html
	mkdir -p doc/text doc/man doc/source/user-manual \
          doc/source/developer-manual doc/source/faq
##  user manual
	rm -rf doc/webserver/user-manual
	cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
          mv user-manual ../webserver
	cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
          $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
          user-manual
##  developer manual
	rm -rf doc/webserver/developer-manual
	cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
          cd .. && mv developer-manual ../webserver
	cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
          $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
          developer-manual
##  faq
	rm -rf doc/webserver/faq
	cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
	cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
          tmp.html > ../text/faq.txt && rm -rf tmp.html faq
## readme
	$(MAKE) redhat-readme
# kludge to force recreation on next run. Rodgrigo?
	@rm -f doc/source/ldpOK.dsl

# For those with man2html ala RH7's.
man2html:
	mkdir -p doc/webserver/man-page
	if [ "$(MAN2HTML)" != "false" ]; then \
		$(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \
           perl -pi -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' doc/webserver/man-page/privoxy-man-page.html; \
     else \
          $(MAKE) groff2html; \
	fi

## Make README
redhat-readme: doc/source/ldpOK.dsl
	cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
          tmp.html > ../../README && rm -rf tmp.html
     # kludge to force recreation on next run. Rodgrigo?
	@rm -f doc/source/ldpOK.dsl

#### WIP targets HB ##################
## Make AUTHORS file
authors: doc/source/ldpOK.dsl
	cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
          tmp.html > ../../AUTHORS && rm -f tmp.html
     # kludge to force recreation on next run. Rodgrigo?
	@rm -f doc/source/ldpOK.dsl

# make a man page, and then (lousy) HTML version.
man: doc/source/ldpOK.dsl
	mkdir -p doc/source/man
	cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
	perl -pi -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
	cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
     mv -f index.html privoxy-man-page.html
     # kludge to force recreation on next run. Rodgrigo?
	@rm -f doc/source/ldpOK.dsl

#############################################################################
#
# Webserver
#
# moves dokumentation to webserver
#
#############################################################################
webserver: tidy
	@$(ECHO) -------------------------------------------------------
	@$(ECHO) You have run make dok/redhat-dok before, right?
	@$(ECHO) Note that this command scps all stuff to the webserver,
	@$(ECHO) it will not remove obsolete documents.
	@$(ECHO) -------------------------------------------------------

	@$(ECHO) Uploading 
	@cd doc/webserver; \
          upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
          $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xv'

	@$(ECHO) Fixing permissions
	@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type d | xargs chmod 775 2>/dev/null'
	@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type f | xargs chmod 664 2>/dev/null'

web-actions: tidy
	@$(ECHO) Uploading 
	@cd doc/webserver/actions; \
          upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
          $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xv'

	@$(ECHO) Fixing permissions
	@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/* -type f | xargs chmod 664 2>/dev/null'	

#############################################################################
# Source file dependencies
#############################################################################

actions.@OBJEXT@:   actions.c   actions.h   config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
cgi.@OBJEXT@:       cgi.c       cgi.h       config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
cgiedit.@OBJEXT@:   cgiedit.c   cgiedit.h   config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@:    encode.c    encode.h    config.h
errlog.@OBJEXT@:    errlog.c    errlog.h    config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
filters.@OBJEXT@:   filters.c   filters.h   config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h 
gateway.@OBJEXT@:   gateway.c   gateway.h   config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
jcc.@OBJEXT@:       jcc.c       jcc.h       config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
list.@OBJEXT@:      list.c      list.h      config.h $(PROJECT_H_DEPS) list.h miscutil.h
loadcfg.@OBJEXT@:   loadcfg.c   loadcfg.h   config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@:   loaders.c   loaders.h   config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@:  miscutil.c  miscutil.h  config.h
parsers.@OBJEXT@:   parsers.c   parsers.h   config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@:    ssplit.c    ssplit.h    config.h miscutil.h
urlmatch.@OBJEXT@:  urlmatch.c  urlmatch.h  config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h

# GNU regex
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h

# PCRS
pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h

# PCRE
pcre/get.@OBJEXT@:        pcre/get.c        pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/pcre.@OBJEXT@:       pcre/pcre.c       pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c 
pcre/pcreposix.@OBJEXT@:  pcre/pcreposix.c  pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.@OBJEXT@:      pcre/study.c      pcre/config.h pcre/internal.h pcre/pcre.h

# An auxiliary program makes the PCRE default character table source

pcre/chartables.c:   pcre/dftables@EXEEXT@
		pcre/dftables@EXEEXT@ >pcre/chartables.c

pcre/dftables@EXEEXT@:       pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
		$(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c

# Win32
w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h

w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
	windres -D__MINGW32__=0.2 -O coff -i $< -o $@

# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h


$(PROGRAM): $(OBJS) $(W32_FILES)
	$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)

clean:
	$(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags` 

tidy:
	$(RM) `find . -name "*~" -o -name "#*#"`

clobber: tidy
	$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar
#
# FIXME: What is all this? 
#
	$(RM) cscope.*  *.pdb *.lib *.exp 

distclean: clobber

tags: $(SRCS) $(HDRS)
	etags $(SRCS) $(HDRS)

install: all
	#
	# FIXME: This is a dirty hack to have an install target
	#        that works at least for some setups. This needs
	#        to be fixed!
	#
	$(STRIP_PROG) $(PROGRAM)
	$(INSTALL) $(INSTALL_D) $(SBIN_DEST)
	$(INSTALL) $(INSTALL_D) $(DEST)/user-manual
	$(INSTALL) $(INSTALL_D) $(DEST)/templates
	$(INSTALL) $(INSTALL_D) $(CONFDEST)
	$(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
	if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi
	$(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates
	$(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
	# FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
	# FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
	$(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy


#############################################################################

## Local Variables:
## tab-width: 3
## end:

# $Log: GNUmakefile.in,v $
# Revision 1.64  2002/04/04 22:14:51  oes
# No longer rely on find honoring -iname
#
# Revision 1.63  2002/04/04 21:06:22  swa
# cosmetics.
#
# Revision 1.62  2002/04/04 20:49:50  swa
# attempt to consolidate the
# different dokbook versions.
#
# Revision 1.61  2002/04/04 19:18:21  swa
# readme was leftover directory. use w3m instead
# of lynx to be consistent among developers. use
# consistent target naming.
#
# Revision 1.60  2002/04/04 12:25:41  oes
# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
#
# Revision 1.59  2002/04/04 08:32:45  swa
# wrong name for tarball-dist target. further fixed content of tarball dist
#
# Revision 1.58  2002/04/04 06:32:58  hal9
# New dok targets for make readme.
#
# Revision 1.57  2002/04/04 00:36:36  gliptak
# always use pcre for matching
#
# Revision 1.56  2002/04/03 22:28:03  gliptak
# Removed references to gnu_regex
#
# Revision 1.55  2002/04/03 19:54:29  swa
# freebsd tested to work. attempt to move tarball dist target forward
#
# Revision 1.54  2002/04/03 14:54:07  oes
# Standard clean and clobber semantics II
#
# Revision 1.53  2002/04/03 14:19:16  oes
# Standard clean and clobber semantics
#
# Revision 1.52  2002/04/03 02:56:18  hal9
# Revert previous FAQ numbering kludge.
#
# Revision 1.51  2002/04/02 13:03:56  oes
# Added fix for webserver permissions
#
# Revision 1.50  2002/04/02 03:46:24  hal9
# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
#
# Revision 1.49  2002/03/30 22:20:12  swa
# cd didn't work. neither did find.
#
# Revision 1.48  2002/03/30 19:04:06  swa
# people release differently. no good.
# I want to make parts of the docs only.
#
# Revision 1.47  2002/03/30 09:05:21  swa
# better packaging. better rpm building.
# tar failed on sun (no exclude there).
#
# Revision 1.46  2002/03/29 20:09:01  swa
# al's patch
#
# Revision 1.45  2002/03/29 19:45:45  swa
# for lazy swa
#
# Revision 1.44  2002/03/29 17:42:44  gliptak
# Correcting for Solaris tar limitations
#
# Revision 1.43  2002/03/29 07:40:03  swa
# fixed make webserver. doh
#
# Revision 1.42  2002/03/29 06:59:04  swa
# other users could not modify files on webserver
#
# Revision 1.41  2002/03/28 20:43:00  swa
# set make correctly
#
# Revision 1.40  2002/03/28 04:22:44  hal9
# More on man2html stuff.
#
# Revision 1.39  2002/03/28 01:04:14  hal9
# More man2html stuff for docs.
#
# Revision 1.38  2002/03/27 16:02:30  swa
# have a generic target
#
# Revision 1.37  2002/03/27 15:30:26  swa
# have a consistent appearance
#
# Revision 1.36  2002/03/27 14:58:08  swa
# can be used by mutilple targets
#
# Revision 1.35  2002/03/27 14:53:19  swa
# added solaris-dist
#
# Revision 1.34  2002/03/27 10:30:11  swa
# we want a html man file on the webserver
#
# Revision 1.33  2002/03/27 03:05:35  hal9
# Added man2html target for docs (redhat-dok only for now)
#
# Revision 1.32  2002/03/26 22:29:54  swa
# we have a new homepage!
#
# Revision 1.31  2002/03/26 14:00:18  swa
# fixed make tarball, tarball-dist, tarball-clean
#
# Revision 1.30  2002/03/25 12:52:25  swa
# new targets
#
# Revision 1.29  2002/03/24 17:03:55  jongfoster
# Name change
#
# Revision 1.28  2002/03/24 16:19:48  swa
# configure needs to be generated.
#
# Revision 1.27  2002/03/24 16:13:57  swa
# generated files are a nono in cvs
#
# Revision 1.26  2002/03/24 15:36:02  swa
# did not build.
#
# Revision 1.25  2002/03/24 14:31:08  swa
# remove more crappy files. set RPM
# release version correctly.
#
# Revision 1.24  2002/03/24 14:19:55  swa
# set rpm package release in configure.in. nowhere else.
#
# Revision 1.23  2002/03/24 13:06:49  swa
# suse-clean now runs fine
#
# Revision 1.22  2002/03/24 12:56:21  swa
# name change related issues.
#
# Revision 1.21  2002/03/24 12:43:57  swa
# name change
#
# Revision 1.20  2002/03/24 11:39:17  jongfoster
# Renaming config files
#
# Revision 1.19  2002/03/22 20:53:03  morcego
# - Ongoing process to change name to JunkbusterNG
# - configure/configure.in: no change needed
# - GNUmakefile.in:
#         - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
#         - PROGRAM    = jbng@EXEEXT@
#         - rh-spec now references as junkbusterng-rh.spec
#         - redhat-upload: references changed to junkbusterng-* (package names)
#         - tarball-dist: references changed to JunkbusterNG-distribution-*
#         - tarball-src: now JunkbusterNG-*
#         - install: initscript now junkbusterng.init and junkbusterng (when
#                    installed)
# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
# - junkbusterng.spec:
#         - References to the expression ijb where changed where possible
#         - New package name: junkbusterng (all in lower case, acording to
#           the LSB recomendation)
#         - Version changed to: 2.9.13
#         - Release: 1
#         - Added: junkbuster to obsoletes and conflicts (Not sure this is
#           right. If it obsoletes, why conflict ? Have to check it later)
#         - Summary changed: Stefan, please check and aprove it
#         - Changes description to use the new name
#         - Sed string was NOT changed. Have to wait to the manpage to
#           change first
#         - Keeping the user junkbuster for now. It will require some aditional
#           changes on the script (scheduled for the next specfile release)
#         - Added post entry to move the old logfile to the new log directory
#         - Removing "chkconfig --add" entry (not good to have it automaticaly
#           added to the startup list).
#         - Added preun section to stop the service with the old name, as well
#           as remove it from the startup list
#         - Removed the chkconfig --del entry from the conditional block on
#           the preun scriptlet (now handled on the %files section)
# - junkbuster.init: renamed to junkbusterng.init
# - junkbusterng.init:
#         - Changed JB_BIN to jbng
#         - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
#           be used where necessary (config dir)
#
# Aditional notes:
# - The config directory is /etc/junkbuster yet. Have to change it on the
# specfile, after it is changes on the code
# - The only files that got renamed on the cvs tree were the rh specfile and
# the init file. Some file references got changes on the makefile and on the
# rh-spec (as listed above)
#
# Revision 1.18  2002/03/21 23:00:00  swa
# want to autogenerate stuff.
#
# Revision 1.17  2002/03/19 19:30:04  morcego
# - Fixing stylesheet checking on configure. If it is found, no further checks
#   should be done
#
# - configure will now check for db2html or docbook2html (should work now
#   on SuSe without the docbktls package)
#
# Revision 1.16  2002/03/14 22:32:32  hal9
# Bumped the RPM version.
#
# Revision 1.15  2002/03/08 20:00:28  swa
# some leftovers.
#
# Revision 1.14  2002/03/07 18:25:56  swa
# synced redhat and suse build process
#
# Revision 1.13  2002/03/07 17:17:56  oes
# (Hopefully) fixed for older make versions
#
# Revision 1.12  2002/03/07 15:28:27  swa
# more informative
#
# Revision 1.11  2002/03/06 14:33:18  sarantis
# Use proper temp file, not "abc".
#
# Revision 1.10  2002/03/06 14:19:35  sarantis
# Cleanup PID_FILE_PATH from redhat-dist target
#
# Revision 1.9  2002/03/05 17:31:11  morcego
# Search for docbook.dsl. Should solve portability problems for SuSe.
#
# Revision 1.8  2002/03/05 14:07:42  morcego
# configure now detects rpm topdir, and change GNUmakefile acordingly
#    (based on sugestion by Sarantis Paskalis)
#
# Revision 1.7  2002/03/05 13:43:28  morcego
# Checking for text browser, so redhat-dok can work.
#
# Revision 1.6  2002/03/05 13:10:51  morcego
# Changes to implement redhat-dok (Hal Burgiss)
# Changes to make it work on other distros and out-of-the-shelf configurations
#
# Revision 1.5  2002/02/27 15:30:39  hal9
# Reset $(RPM_PACKAGEV) to 1 (was 2)
#
# Revision 1.4  2002/01/17 21:44:04  jongfoster
# Adding urlmatch.[ch]
#
# Revision 1.3  2002/01/04 15:26:08  oes
# Added tarball-src target
#
# Revision 1.2  2001/12/30 14:07:31  steudten
# - Add signal handling (unix)
# - Add SIGHUP handler (unix)
# - Add creation of pidfile (unix)
# - Add action 'top' in rc file (RH)
# - Add entry 'SIGNALS' to manpage
# - Add exit message to logfile (unix)
#
# Revision 1.1  2001/12/01 11:22:57  jongfoster
# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
# make break in a more obvious way.
# Adding .PHONY section.
#
# Revision 1.40  2001/12/01 00:24:11  jongfoster
# Renaming various config files
# Fixing CR->CRLF under Win32 (I hope)
#
# Revision 1.39  2001/11/06 12:07:30  steudten
# Add --clean for building rpm in target redhat-dist.
#
# Revision 1.38  2001/11/05 21:35:23  steudten
# Complete rewrite for the 'redhat-dist' target.
# Checks for writeable RPM build directories for calling user.
# So you must not be root, just set the modes to 1777 to
# build a RH package.
# Fix the upload-target to be arch independant.
# Add target for 'solaris-dist' - coming soon.
#
# Revision 1.37  2001/11/01 00:52:04  hal9
# Redhat-upload stuff per Stefan.
#
# Revision 1.36  2001/10/31 19:26:13  swa
# automate process of uploading new releases
# to sf.
#
# Revision 1.35  2001/10/15 22:14:59  joergs
# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
#  the general CFLAGS already.
#
# Revision 1.34  2001/10/15 18:28:06  steudten
# remove config.cache for target clobber.
# Cleanup make dist for RH and S.u.S.E.
#
# Revision 1.33  2001/10/10 12:43:33  oes
# Added ugly hack to make install target work at least for some setups.
#
# Revision 1.32  2001/10/09 22:38:19  jongfoster
# Correcting actionsfile filename for Win32 INI build
#
# Revision 1.31  2001/09/23 10:13:48  swa
# upload process established. run make webserver and
# the documentation is moved to the webserver. documents
# are now linked correctly.
#
# Revision 1.30  2001/09/19 17:55:49  oes
# Fixed CFLAGS
#
# Revision 1.29  2001/09/16 17:34:27  jongfoster
# Removing showargs.[ch], adding cgi(simple|edit).[ch]
# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
# of build problems.
#
# Revision 1.28  2001/09/13 15:19:08  swa
# we want text files as well.
#
# Revision 1.27  2001/09/13 13:11:37  steudten
#
# Replace DEBUG_CFLAGS with OTHER_CFLAGS
#
# Revision 1.26  2001/09/12 23:44:54  david__schmidt
# Mac OSX (Darwin) support added.
#
# Revision 1.25  2001/09/12 22:55:45  joergs
# AmigaOS support added.
#
# Revision 1.24  2001/09/12 17:28:59  david__schmidt
#
# OS/2 port: update autoconf'd support for the platform.
#
# Revision 1.23  2001/09/12 16:28:42  swa
# added "make dok" section to generate html pages from
# the sgml source documents. note that the we do not want
# generated stuff in cvs.
#
# Revision 1.22  2001/09/10 16:31:23  swa
# buildroot definition in the specfile fucks up the build
# process under suse. hence I moved it to the "rpm -ta"
# command
#
# Revision 1.21  2001/09/10 11:12:49  oes
# Turning on -Wall
#
# Revision 1.20  2001/08/02 22:04:29  jongfoster
# Removing some remaining references to obsolete w32rulesdlg.[ch]
#
# Revision 1.19  2001/07/30 22:14:03  jongfoster
# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
#
# Revision 1.18  2001/07/29 17:09:17  jongfoster
# Major changes to build system in order to fix these bugs:
# - pthreads under Linux was broken - changed -lpthread to -pthread
# - Compiling in MinGW32 mode under CygWin now correctly detects
#   which shared libraries are available
# - Solaris support (?) (Not tested under Solaris yet)
#
# Revision 1.17  2001/07/28 16:44:54  oes
# Fixed sed LF->CRLF conversion and removed deprecated files
#
# Revision 1.16  2001/07/15 19:45:33  jongfoster
# Added support for linking with POSIX threads library
#
# Revision 1.15  2001/07/13 13:48:07  oes
#  - Moved STATIC #define for pcre to (ac)config.h
#  - Made -Ipcre depandant on static pcre compilation to
#    avoid version conflicts
#  - Included compilation and depandancies for new deanimate.c
#  - Made changes to the pcre/pcreposix/pcrs build process
#    as required by the new library autodetection in
#    configure.in
#
# Revision 1.14  2001/07/01 16:27:44  oes
# Fixed misplaced dependancy
#
# Revision 1.13  2001/06/29 13:18:36  oes
# - added depandancy of filters.o on cgi.h
#
# Revision 1.12  2001/06/12 17:15:56  swa
# fixes, because a clean build on rh6.1 was impossible.
# GZIP confuses make, %configure confuses rpm, etc.
#
# Revision 1.11  2001/06/11 11:26:35  sarantis
# RPM version should be the same as ijbswa version.  The rpm release is
# specified in the specfile.
#
# Revision 1.10  2001/06/07 17:27:45  swa
# added suse build section
#
# Revision 1.9  2001/06/04 18:31:58  swa
# files are now prefixed with either `confdir' or `logdir'.
# `make redhat-dist' replaces both entries confdir and logdir
# with redhat values
#
# Revision 1.8  2001/06/04 10:44:57  swa
# `make redhatr-dist' now works. Except for the paths
# in the config file.
#
# Revision 1.7  2001/06/03 17:09:09  swa
# swa for oes: reversed my earlier change
#
# Revision 1.6  2001/06/03 17:07:27  swa
# swa for oes
#
# Revision 1.5  2001/06/03 13:57:26  swa
# compile cgi.c (for andreas' GUI)
#
# Revision 1.4  2001/05/31 21:18:45  jongfoster
# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
#
# Revision 1.3  2001/05/29 20:02:48  joergs
# Changes for AmigaOS added.
#
# Revision 1.2  2001/05/17 22:23:23  oes
#  - Added auto-generation of CRLFs for Win32 config files
#  - Added comment-prefix to all Win32-only options in the config file
#    and provided auto stripping of this prefix for the Win32 platform by make
#
# Revision 1.1.1.1  2001/05/15 13:59:00  oes
# Initial import of version 2.9.3 source tree
#
#