1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.104.2.8 2002/07/12 10:04:32 kick_ Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
46 RPM_PACKAGEV = $(RPM_VERSION)
47 SNAPVERSION = $(RPM_PACKAGEV)-$(shell date "+%Y%m%d")
50 #############################################################################
51 # Directories for "make install"
52 #############################################################################
55 CONFDEST = @prefix@@sysconfdir@
56 SBIN_DEST = @prefix@@sbindir@
57 MAN_DEST = @prefix@@mandir@
58 DOK_WEB_USEM=doc/webserver/user-manual
60 #############################################################################
62 #############################################################################
64 PROGRAM = privoxy@EXEEXT@
70 INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
71 INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
72 INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
87 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
90 G2H_CMD = groff -mandoc -Thtml
94 DOC_TMP = $(DOC_DIR)/tmp
95 DOC_STATUS = @DOC_STATUS@
101 # Program to do LF->CRLF
103 # The sed version should be the most portable, but it doesn't for for me,
104 # the other two do. FIXME.
106 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
107 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
108 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
109 CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
110 TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
112 #############################################################################
113 # Setup for make distribution rh and suse for now
114 #############################################################################
116 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
117 RPM_BASE = @RPM_BASE@
119 #############################################################################
120 # We include these files in our distributions
121 #############################################################################
122 # take care that no CVS .cvsignore or other crappy files
124 # and escape every '#' in the find. doh.
125 CONFIG_FILES = config trust \
127 standard.action user.action \
129 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
131 DOC_FILES = AUTHORS LICENSE README ChangeLog \
132 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
133 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
134 `find doc/webserver/ -name "*.css"` \
137 #############################################################################
138 # Filenames and libraries
139 #############################################################################
141 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
142 errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
143 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
146 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
147 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
149 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
150 W32_FILES = @WIN_ONLY@w32.res
151 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
152 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
153 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
154 W32_INIS = @WIN_ONLY@config.txt trust.txt
156 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
157 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
158 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
160 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
161 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
162 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
164 # No REGEX (maybe because dynamically linked pcreposix):
166 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
168 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
169 REGEX_HDRS = $(REGEX_SRC:.c=.h)
171 # Dependencies introduced by #include "project.h".
172 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
174 # Socket libraries for platforms that need them explicitly defined
175 SOCKET_LIB = @SOCKET_LIB@
177 # PThreads library, if needed.
178 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
180 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
181 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
182 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
183 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
186 #############################################################################
188 #############################################################################
190 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
191 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
193 # The flag "-pthread" is required if using Pthreads under Linux (and
194 # possibly other OSs).
195 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
197 # Add your flags here
200 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
201 @STATIC_PCRE_ONLY@ -Ipcre
203 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
206 #############################################################################
209 # There should NOT be any targets above this line.
210 #############################################################################
211 all: $(PROGRAM) default.action
214 #############################################################################
216 #############################################################################
217 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
218 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
219 install conectiva-spec conectiva-dist conectiva-upload
222 #############################################################################
223 # Define this explicitly because Solaris is broken!
224 #############################################################################
226 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
229 #############################################################################
230 # Strip master copy comments from default.action:
231 #############################################################################
232 default.action: default.action.master
233 $(GREP) -v '^#MASTER#' $< > $@
235 #############################################################################
237 #############################################################################
239 inifiles: $(W32_INIS)
242 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
243 -e 's!\jarfile jarfile!jarfile jar.log!' \
244 -e 's!\logfile logfile!logfile privoxy.log!' \
245 -e 's!#Win32-only: !!' \
248 # LF to CRLF in default.action
249 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
250 # LF to CRLF in default.filter
251 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
254 $(DOSFILTER) < $< > $@
256 #############################################################################
258 #############################################################################
260 @if [ -d CVS ]; then \
261 $(ECHO) "***************************************************"; \
263 $(ECHO) "*** WARNING ***"; \
265 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
266 $(ECHO) "*** that you are trying to build a distribution ***"; \
267 $(ECHO) "*** package based on a checked out, not an ***"; \
268 $(ECHO) "*** exported copy of the source tree. Please ***"; \
269 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
270 $(ECHO) "*** developer manual. ***"; \
272 $(ECHO) "***************************************************"; \
273 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
274 $(ECHO) -n "really want to proceed: "; \
276 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
280 #############################################################################
281 # create tar.gz from CVS:
282 # This make-target is usually called through 'create-archive'. If you
283 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
284 # tar.gz with the current date in the name and as a releasenumber in the
285 # spec-file. But the main usage is to run it as follows (Red Hat example):
286 # make SNAPVERSION=1.6x create-snapshot
287 # This creates a tar.gz and spec-file for a Red Hat 6.x version.
288 #############################################################################
290 @tag=`cvs status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
291 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
292 echo "*** Creating package from $$tag!"; \
293 cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
294 @$(MV) $(TMPDIR)/current $(TMPDIR)/$(PROGRAM)-$(VERSION); \
295 cd $(TMPDIR)/$(PROGRAM)-$(VERSION); \
296 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
297 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
298 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
299 privoxy-rh.spec > $$TMPFILE ; then \
300 $(MV) -f $$TMPFILE privoxy-rh.spec; \
302 $(ECHO) "Could not set version info in specfile."; \
305 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
306 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
307 privoxy-suse.spec > $$TMPFILE ; then \
308 $(MV) -f $$TMPFILE privoxy-suse.spec; \
310 $(ECHO) "Could not set version info in specfile."; \
315 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
316 "privoxy-suse.spec" -czf $(PROGRAM)-rh-$(VERSION).tar.gz \
317 $(PROGRAM)-$(VERSION); \
318 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
319 "privoxy-rh.spec" -czf $(PROGRAM)-suse-$(VERSION).tar.gz \
320 $(PROGRAM)-$(VERSION);
321 @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
322 @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
324 @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
325 @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
328 #############################################################################
329 # looks at the version of Makefile and exports a corresponding source-tree
330 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
331 # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
332 # Red Hat and one for SuSe (different spec-files)
333 #############################################################################
335 make SNAPVERSION=$(SNAPVERSION) create-snapshot
337 #############################################################################
338 # RPM specifice stuff (SuSE or Redhat, ..)
339 #############################################################################
340 rpm-stuff: dist-check clean clobber
341 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
342 if [ ! -w $(RPM_BASE)/$$dir ]; then \
343 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
344 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
345 $(ECHO) "%_topdir /home/foo/rpm-build"; \
351 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
353 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
354 echo " No value given for RPM_PACKAGEV. Please use:"; \
355 echo " make dist-upload RPM_PACKAGEV=release"; \
356 echo " where \"release\" is the release number you want to and"; \
357 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
359 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
361 echo "ATTENTION: If your distribution use a specific tag on the"; \
362 echo " release field (like \"cl\" for Conectiva, and"; \
363 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
364 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
365 echo " Do it like you would do for a redhat package,"; \
366 echo " (i.e. just the number)."; \
372 #############################################################################
373 # Create Conectiva specfile from RedHat specfile
374 #############################################################################
376 $(RM) privoxy-cl.spec
377 chmod a+x genclspec.sh
380 #############################################################################
381 # Conectiva distribution for x86
382 #############################################################################
383 conectiva-dist: rpm-stuff conectiva-spec
385 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
386 $(RPMBUILD) --clean -ta $(TAR_ARCH)
387 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
389 conectiva-upload: check-release
390 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
392 #############################################################################
393 # redhat distribution alpha and x86
394 #############################################################################
395 redhat-dist: rpm-stuff
397 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
398 $(RPMBUILD) --clean -ta $(TAR_ARCH)
399 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
401 # anonymously ncftps the rpms to sourceforge
402 redhat-upload: check-release
403 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
404 # better should use `arch` here instead of ix86 to support other platforms too
405 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
406 @$(ECHO) -------------------------------------------------------
408 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
409 @$(ECHO) ... and release the files.
410 @$(ECHO) -------------------------------------------------------
411 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
414 #############################################################################
415 # Creates a Red Hat sourcepackage from CVS (not from the current sources
417 #############################################################################
420 $(MV) $(PROGRAM)-rh-$(VERSION).tar.gz $(PROGRAM)-$(VERSION).tar.gz
421 $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
424 #############################################################################
425 # suse distribution. works fine. no need to be root.
426 #############################################################################
428 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
429 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
430 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
431 # privoxy-suse.spec > $$TMPFILE ; then \
432 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
434 # $(ECHO) "Could not set version info in specfile."; \
438 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
439 $(RPMBUILD) --clean -ta $(TAR_ARCH)
440 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
442 # anonymously ncftps the rpms to sourceforge
443 suse-upload: check-release
444 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
445 # better should use `arch` here instead of ix86 to support other platforms too
446 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
447 @$(ECHO) -------------------------------------------------------
449 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
450 @$(ECHO) ... and release the files.
451 @$(ECHO) -------------------------------------------------------
453 # handle with care. use with root.
455 $(RPM) -e junkbuster-suse || true
456 $(RM) -r /etc/junkbuster
457 $(RM) -r /etc/rc.d/junkbuster*
458 $(RM) -r /var/run/junkbuster.pid
459 $(RM) -r /var/log/junkbuster
460 $(RM) /etc/init.d/junkbuster
461 $(RM) /usr/sbin/junkbuster
462 $(RM) /usr/sbin/rcjunkbuster
463 $(RM) /usr/share/man/man1/junkbuster.1.gz
464 $(RPM) -e privoxy-suse || true
465 $(RM) -r /etc/privoxy
466 $(RM) -r /etc/rc.d/privoxy*
467 $(RM) -r /var/run/privoxy.pid
468 $(RM) -r /var/log/privoxy
469 $(RM) /etc/init.d/privoxy
470 $(RM) /usr/sbin/privoxy
471 $(RM) /usr/sbin/rcprivoxy
472 $(RM) /usr/share/man/man1/privoxy.1.gz
474 #############################################################################
475 # generic distribution
476 #############################################################################
479 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
482 $(STRIP_PROG) $(PROGRAM)
483 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
485 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
487 for foo in $(CONFIG_FILES); do \
488 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
491 for foo in $(DOC_FILES); do \
492 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
494 # and zip the archive
495 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
496 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
497 @$(ECHO) Distribution with binary created.
499 # anonymously ncftps the package to sourceforge
501 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
502 @$(ECHO) -------------------------------------------------------
504 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
505 @$(ECHO) ... and release the files.
506 @$(ECHO) -------------------------------------------------------
510 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
512 #############################################################################
513 # solaris distribution. verified on SF machines by swa.
514 #############################################################################
515 solaris-dist: gen-dist
517 # anonymously ncftps the package to sourceforge
518 solaris-upload: gen-upload
521 solaris-clean: gen-clean
524 #############################################################################
526 #############################################################################
528 @$(ECHO) coming soon.
530 @$(ECHO) coming soon.
532 #############################################################################
533 # debian distribution
534 #############################################################################
536 @$(ECHO) coming soon.
538 @$(ECHO) coming soon.
540 #############################################################################
541 # macosx distribution
542 #############################################################################
544 @$(ECHO) coming soon.
546 @$(ECHO) coming soon.
548 #############################################################################
550 #############################################################################
552 @$(ECHO) coming soon.
554 @$(ECHO) coming soon.
556 #############################################################################
557 # freebsd distribution. verified on SF machines by swa.
558 #############################################################################
559 freebsd-dist: gen-dist
561 # anonymously ncftps the package to sourceforge
562 freebsd-upload: gen-upload
565 freebsd-clean: gen-clean
568 #############################################################################
569 # Windows distribution
570 #############################################################################
572 $(ECHO) Not implemented.
575 #############################################################################
576 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
577 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
578 #############################################################################
580 tarball-dist: dist-check clean clobber
581 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
583 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
584 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
585 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
587 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
589 # and zip the archive
590 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
591 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
592 @$(ECHO) Tarball distribution created.
594 # anonymously ncftps the tarball to sourceforge
596 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
597 @$(ECHO) -------------------------------------------------------
599 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
600 @$(ECHO) ... and release the files.
601 @$(ECHO) -------------------------------------------------------
604 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
606 #############################################################################
610 # converts doc/source/*.sgml into html, text and man pages
612 #############################################################################
616 $(RM) doc/webserver/developer-manual/*.html
617 $(RM) -r doc/source/developer-manual
618 mkdir -p doc/text doc/source/developer-manual
619 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
620 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
624 $(RM) doc/webserver/user-manual/*.html
625 $(RM) -r doc/source/user-manual/
626 mkdir -p doc/text doc/source/user-manual
627 cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
628 cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
632 $(RM) doc/webserver/faq/*.html
633 $(RM) -r doc/source/faq
634 mkdir -p doc/text doc/source/faq
635 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
636 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
640 $(RM) doc/man/* doc/webserver/man-page/*.html
641 ifneq ($(MAN2HTML),false)
642 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
643 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
644 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
651 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
652 $(WDUMP) tmp.html > ../../README && $(RM) -r tmp.html
654 # index.sgml is used to create both the Home Page, and a local index
655 # for documentation, etc.
657 # index.html for webserver:
659 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
660 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
661 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
662 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
664 doc/webserver/index.html && $(RM) doc/webserver/*.bak
666 # privoxy-index.html for local documentation:
668 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
669 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
670 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
671 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
673 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
676 # Main documentation target.
677 dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
678 @$(ECHO) Documentation created.
681 # an alternative to the above dok. disabled man page creation for the moment
683 redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
684 @$(ECHO) Documentation created.
686 # For those with man2html ala RH7s.
688 mkdir -p doc/webserver/man-page
689 ifneq ($(MAN2HTML),false)
690 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
691 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
692 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
693 # Twice because my version of man2html is pulling in commas and periods in URLs.
694 $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
695 $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
696 # Get rid of spurious
\a from conversion. (How to do this with perl?)
697 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
703 # Otherwise we get plain groff conversion.
705 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
709 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
710 tmp.html > ../../README && $(RM) -r tmp.html
714 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
715 tmp.html > ../../AUTHORS && $(RM) tmp.html
717 # make a man page, and then (lousy) HTML version.
718 # Requires docbook2man (short perl script), see comments
719 # in privoxy-man-page.sgml. This target is not invoked from other dok targets.
720 # It is built separately due to dependencies on perl scripts.
722 mkdir -p doc/source/man
723 cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
724 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
725 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
726 mv -f index.html privoxy-man-page.html
727 # This html is not used. See make man2html.
728 mv -f doc/source/man/privoxy.1 privoxy.1
731 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
732 # exceptions accordingly. This needs to go before any doc building (doh).
734 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
735 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
736 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
737 doc/source/*sgml doc/source/*/*sgml
738 $(RM) -r doc/source/*bak doc/source/*/*bak
739 ifeq ($(CODE_STATUS),stable)
740 @$(ECHO) Setting docs to stable $(VERSION)
741 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
742 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
743 doc/source/*sgml doc/source/*/*sgml
744 $(RM) -r doc/source/*bak doc/source/*/*bak
746 @$(ECHO) Setting docs to not stable $(VERSION)
747 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
748 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
749 doc/source/*sgml doc/source/*/*sgml
750 $(RM) -r doc/source/*bak doc/source/*/*bak
755 cp -f doc/source/*.sgml doc/pdf
756 cp -f doc/source/*.dsl doc/pdf
757 cd doc/pdf && db2pdf --pdf -s ldp.dsl user-manual.sgml && mv user-manual.pdf privoxy-user-manual.pdf > /dev/null 2>&1
758 cd doc/pdf && db2pdf --pdf -s ldp.dsl developer-manual.sgml && mv developer-manual.pdf privoxy-developer-manual.pdf > /dev/null 2>&1
759 cd doc/pdf && db2pdf --pdf -s ldp.dsl faq.sgml && mv faq.pdf privoxy-faq.pdf > /dev/null 2>&1
760 $(RM) doc/pdf/*.sgml doc/pdf/*.dsl doc/pdf/*.out doc/pdf/*.tex doc/pdf/*.log doc/pdf/*.aux
762 # the layout and style with db2pdf sucks, here is an alternative
763 dok-pdf2: dok-release
764 mkdir -p doc/source/temp # this directory not in cvs
765 cd doc/source && $(DB) -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
766 cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
767 cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
768 # one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
770 # Create release announcement in text and html, with short and long versions.
771 # This is a standalone target, and must be invoked directly.
772 announce: dok-release
774 cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
775 mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
776 cd $(DOC_TMP) && $(DB) announce.sgml &&\
777 mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
778 mv -f *html *txt ../../..
781 # The main Privoxy config file, generated from sgml sources.
782 # NOTE: This will require some hand editing. The new file is outputted
783 # as config.new so that problem sections can be compared to previous
784 # version. This is hardcored to w3m for html/text conversion. Also,
785 # requires the shell util 'fmt'.
786 config-file: dok-release
787 cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
788 w3m -dump __tmp.html |fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
789 $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
790 /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
791 $$header_len=0 unless $$hit_header;\
794 for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
798 $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
799 $$header_len = length($$_);\
800 s/^/# /; /^# #{12,}/ && s/^# #/####/;\
801 s/^.*$$// if $$hit_option;\
803 s/^\n//; s/^#\s*-{20,}//;\
804 $$hit_option=1 if s/^#\s+@@//;' config.new
806 @$(ECHO) "****************************************************"
807 @$(ECHO) "The output file is config.new."
808 @$(ECHO) "Now -- you need to hand edit the results!!!"
809 @$(ECHO) "In particular, check the Debug levels, and the"
810 @$(ECHO) "permit-access, forward & socks examples. They"
811 @$(ECHO) "probably got hammered."
812 @$(ECHO) "****************************************************"
814 # config file, alternate verison using lynx (perl stuff unfinished). Lynx
815 # does not do so good a job.
817 cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
818 $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
819 lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
820 $(PERL) -pi -e 's/^( )//;\
821 s/:$\/:\n/' config.new
823 #############################################################################
827 # moves dokumentation to webserver
829 #############################################################################
831 @$(ECHO) -------------------------------------------------------
832 @$(ECHO) You have run make dok/redhat-dok before, right?
833 @$(ECHO) Note that this command scps all stuff to the webserver,
834 @$(ECHO) it will not remove obsolete documents.
835 @$(ECHO) -------------------------------------------------------
839 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
840 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
842 @$(ECHO) Fixing permissions
843 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
844 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
845 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
850 @cd doc/webserver/actions; \
851 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
852 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
854 @$(ECHO) Fixing permissions
855 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
856 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
858 #############################################################################
859 # Source file dependencies
860 #############################################################################
862 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
863 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
864 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
865 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
866 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
867 encode.@OBJEXT@: encode.c encode.h config.h
868 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
869 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
870 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
871 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
872 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
873 killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
874 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
875 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
876 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
877 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
878 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
879 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
880 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
883 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
886 pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
889 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
890 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
891 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
892 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
893 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
895 # An auxiliary program makes the PCRE default character table source
897 pcre/chartables.c: pcre/dftables@EXEEXT@
898 pcre/dftables@EXEEXT@ >pcre/chartables.c
900 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
901 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
904 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
905 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
906 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
908 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
909 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
912 @AMIGAOS_ONLY@OBJS += amiga.o
913 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
914 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
915 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
916 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
919 $(PROGRAM): $(OBJS) $(W32_FILES)
920 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
923 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags`
926 $(RM) `find . -name "*~"`
927 # $(RM) `find . -name "#*#"` # what is this for??
928 $(RM) `find . -name ".\#*"`
931 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
932 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl
935 # FIXME: What is all this?
937 $(RM) cscope.* *.pdb *.lib *.exp
941 tags: $(SRCS) $(HDRS)
942 etags $(SRCS) $(HDRS)
946 # FIXME: This is a dirty hack to have an install target
947 # that works at least for some setups. This needs
950 $(STRIP_PROG) $(PROGRAM)
951 $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
952 $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
953 $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
954 $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
955 $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
956 if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
957 $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
958 $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
959 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
960 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
961 $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
964 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
965 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
966 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
967 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
968 193,51,228,11,1,0,0);'|zcat
970 #############################################################################
976 # $Log: GNUmakefile.in,v $
977 # Revision 1.104.2.8 2002/07/12 10:04:32 kick_
978 # added helper targets to the makefile. They shouldn't break anything, but
979 # make my life a lot easier.
981 # The new rpm has been splitted into two parts, one for package installation/
982 # removal, one for package building.
983 # Therefore rpm -ta isn't a valid command anymore and needs to be replaced
984 # by rpmbuild -ta (this is backwards compatible)
986 # Revision 1.104.2.7 2002/06/07 00:23:47 hal9
987 # Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
988 # thus breaking them completely.
990 # Revision 1.104.2.6 2002/06/02 03:26:25 hal9
991 # Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
992 # index.html and team/index.html)
994 # Revision 1.104.2.5 2002/05/30 15:35:01 hal9
995 # This is more cleanup on the make config-file target. Most issues for
996 # automatic generation are taken care of. There are still some problems
997 # that require hand editing. Namely, some of the examples that are > 80 chars.
999 # Revision 1.104.2.4 2002/05/29 02:12:17 hal9
1000 # Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
1001 # new target is 'make config-file', _not_ make config.
1003 # Revision 1.104.2.3 2002/05/29 02:05:48 hal9
1004 # 'make config' target added (WIP) for future generation of config file from
1005 # text in u-m so the two are in sync. New generated config, which requires
1006 # some hand editing for the time being.
1008 # Revision 1.104.2.2 2002/05/28 02:32:55 hal9
1009 # New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
1010 # not being cleaned up in doc/webserver.
1012 # Revision 1.104.2.1 2002/05/26 17:19:34 hal9
1013 # Remove Table of Contents from readme with oes's dsl trick.
1015 # Revision 1.104 2002/05/24 00:03:49 oes
1016 # Use p_doc.css for the Homepage for consistency
1018 # Revision 1.103 2002/05/23 23:19:00 oes
1019 # Use dsl without TOC for the homepage
1021 # Revision 1.102 2002/05/16 01:20:17 hal9
1022 # make announce target added.
1024 # Revision 1.101 2002/05/15 12:28:46 oes
1025 # Trying to keep Hal happy :)
1027 # Revision 1.100 2002/05/08 13:48:18 hal9
1028 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1030 # Revision 1.99 2002/05/08 13:42:07 hal9
1031 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1032 # perl, since its way too convoluted to try to fix proper with docbook.
1034 # Revision 1.98 2002/05/03 14:33:06 oes
1035 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1037 # Revision 1.97 2002/04/27 20:27:43 swa
1038 # no longer needed due to new
1039 # PACKAGE_VERSION process
1041 # Revision 1.96 2002/04/27 17:44:32 morcego
1042 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1043 # - Using the RM macro everywhere rm is called (either we use, or don't)
1046 # Revision 1.95 2002/04/27 15:37:25 swa
1047 # replacing directory in document creation process
1048 # no longer necessary.
1050 # Revision 1.94 2002/04/27 08:23:29 swa
1051 # pdf process reviewed and cleaned up
1053 # Revision 1.93 2002/04/27 04:55:53 morcego
1054 # privoxy-cl.spec now gets removed by clobber target
1056 # Revision 1.92 2002/04/27 04:53:40 morcego
1057 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1060 # Revision 1.91 2002/04/27 04:44:51 morcego
1061 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1062 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1063 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1065 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1066 # for Conectiva Linux
1068 # Revision 1.90 2002/04/26 17:46:53 swa
1071 # Revision 1.89 2002/04/26 17:20:54 swa
1072 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1074 # Revision 1.88 2002/04/25 19:13:57 morcego
1075 # Removed RPM release number declaration on configure.in
1076 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1077 # targets (will produce an error, explaining who to do it, if no value
1080 # Revision 1.87 2002/04/23 14:10:59 swa
1081 # now create pdf documents
1083 # Revision 1.86 2002/04/15 04:30:27 hal9
1084 # Missed two -pi.bak's on perl/cygwin problem.
1086 # Revision 1.85 2002/04/14 01:05:34 hal9
1087 # Revert dok-webserver change for SF logo.
1089 # Revision 1.84 2002/04/13 22:43:25 hal9
1090 # -Fix dok-webserver for SF logo (more perl).
1091 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1093 # Revision 1.83 2002/04/12 09:39:25 oes
1094 # Excluding yet more files from tarball; making dist warning yet more scary
1096 # Revision 1.82 2002/04/11 21:07:11 oes
1097 # Excluding more files from tarball build
1099 # Revision 1.81 2002/04/11 14:40:27 oes
1100 # Fixed typo -- Thanks, Moritz!
1102 # Revision 1.80 2002/04/11 12:50:00 oes
1103 # Fixed tarball-dist target
1105 # Revision 1.79 2002/04/11 06:49:28 oes
1106 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1108 # Revision 1.78 2002/04/09 13:37:11 sarantis
1109 # fix tar options typo
1111 # Revision 1.77 2002/04/09 13:28:53 swa
1112 # build suse and gen-dist with html docs
1114 # Revision 1.76 2002/04/08 22:43:41 oes
1115 # Fix: Include dotfiles in fixing webserver permissions
1117 # Revision 1.75 2002/04/08 22:14:59 oes
1118 # Silencing tar warnings in the web* targets
1120 # Revision 1.74 2002/04/08 15:22:44 hal9
1121 # This has finishing touches for dok building. Should be ready to go.
1122 # -The main doc build is now 'make dok', should work on Redhat too.
1123 # -Removed man page from main doc build. It is built separately due to
1124 # perl scripts that most aren't likely to have.
1126 # Revision 1.73 2002/04/08 14:03:24 oes
1127 # oes for al: Fix install target
1129 # Revision 1.72 2002/04/08 13:42:11 oes
1130 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1132 # Revision 1.71 2002/04/07 20:32:03 hal9
1133 # -Add meta data kludge for make dok-webserver via $(PERL).
1134 # -Add subdirs for 'make dok-release'.
1136 # Revision 1.70 2002/04/07 08:59:40 swa
1137 # generated files. do NOT edit.
1138 # fixed directory bug in makefile.
1140 # Revision 1.69 2002/04/07 08:10:47 swa
1141 # create some of the webserver docs
1142 # automatically (in particular if
1143 # those docs recycle other documentation
1144 # fragments). Now committed webserver's
1147 # Revision 1.68 2002/04/07 07:58:11 swa
1148 # create some of the webserver docs
1149 # automatically (in particular if
1150 # those docs recycle other documentation
1153 # Revision 1.67 2002/04/07 05:31:42 hal9
1154 # Add 'dok-release' target:
1155 # -Set doc entities to VERSION and CODE_STATUS during make.
1156 # -Set doc conditional content flags (stable vs non-stable).
1157 # A separate target for the time being but needs to be incorporated into
1158 # dok build at some point.
1159 # -Filter out a spurious ^G from new man page > html converion in man2html.
1161 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1162 # Prettifying groff2html.
1163 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1164 # (The shell "if"s were hiding errors)
1165 # "perl" -> "$(PERL)"
1166 # Spaces->tabs in a couple of places.
1168 # Revision 1.65 2002/04/06 05:16:39 hal9
1169 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1170 # -Both of these will soon be generated files.
1172 # Revision 1.64 2002/04/04 22:14:51 oes
1173 # No longer rely on find honoring -iname
1175 # Revision 1.63 2002/04/04 21:06:22 swa
1178 # Revision 1.62 2002/04/04 20:49:50 swa
1179 # attempt to consolidate the
1180 # different dokbook versions.
1182 # Revision 1.61 2002/04/04 19:18:21 swa
1183 # readme was leftover directory. use w3m instead
1184 # of lynx to be consistent among developers. use
1185 # consistent target naming.
1187 # Revision 1.60 2002/04/04 12:25:41 oes
1188 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1190 # Revision 1.59 2002/04/04 08:32:45 swa
1191 # wrong name for tarball-dist target. further fixed content of tarball dist
1193 # Revision 1.58 2002/04/04 06:32:58 hal9
1194 # New dok targets for make readme.
1196 # Revision 1.57 2002/04/04 00:36:36 gliptak
1197 # always use pcre for matching
1199 # Revision 1.56 2002/04/03 22:28:03 gliptak
1200 # Removed references to gnu_regex
1202 # Revision 1.55 2002/04/03 19:54:29 swa
1203 # freebsd tested to work. attempt to move tarball dist target forward
1205 # Revision 1.54 2002/04/03 14:54:07 oes
1206 # Standard clean and clobber semantics II
1208 # Revision 1.53 2002/04/03 14:19:16 oes
1209 # Standard clean and clobber semantics
1211 # Revision 1.52 2002/04/03 02:56:18 hal9
1212 # Revert previous FAQ numbering kludge.
1214 # Revision 1.51 2002/04/02 13:03:56 oes
1215 # Added fix for webserver permissions
1217 # Revision 1.50 2002/04/02 03:46:24 hal9
1218 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1219 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1221 # Revision 1.49 2002/03/30 22:20:12 swa
1222 # cd didn't work. neither did find.
1224 # Revision 1.48 2002/03/30 19:04:06 swa
1225 # people release differently. no good.
1226 # I want to make parts of the docs only.
1228 # Revision 1.47 2002/03/30 09:05:21 swa
1229 # better packaging. better rpm building.
1230 # tar failed on sun (no exclude there).
1232 # Revision 1.46 2002/03/29 20:09:01 swa
1235 # Revision 1.45 2002/03/29 19:45:45 swa
1238 # Revision 1.44 2002/03/29 17:42:44 gliptak
1239 # Correcting for Solaris tar limitations
1241 # Revision 1.43 2002/03/29 07:40:03 swa
1242 # fixed make webserver. doh
1244 # Revision 1.42 2002/03/29 06:59:04 swa
1245 # other users could not modify files on webserver
1247 # Revision 1.41 2002/03/28 20:43:00 swa
1248 # set make correctly
1250 # Revision 1.40 2002/03/28 04:22:44 hal9
1251 # More on man2html stuff.
1253 # Revision 1.39 2002/03/28 01:04:14 hal9
1254 # More man2html stuff for docs.
1256 # Revision 1.38 2002/03/27 16:02:30 swa
1257 # have a generic target
1259 # Revision 1.37 2002/03/27 15:30:26 swa
1260 # have a consistent appearance
1262 # Revision 1.36 2002/03/27 14:58:08 swa
1263 # can be used by mutilple targets
1265 # Revision 1.35 2002/03/27 14:53:19 swa
1266 # added solaris-dist
1268 # Revision 1.34 2002/03/27 10:30:11 swa
1269 # we want a html man file on the webserver
1271 # Revision 1.33 2002/03/27 03:05:35 hal9
1272 # Added man2html target for docs (redhat-dok only for now)
1274 # Revision 1.32 2002/03/26 22:29:54 swa
1275 # we have a new homepage!
1277 # Revision 1.31 2002/03/26 14:00:18 swa
1278 # fixed make tarball, tarball-dist, tarball-clean
1280 # Revision 1.30 2002/03/25 12:52:25 swa
1283 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1286 # Revision 1.28 2002/03/24 16:19:48 swa
1287 # configure needs to be generated.
1289 # Revision 1.27 2002/03/24 16:13:57 swa
1290 # generated files are a nono in cvs
1292 # Revision 1.26 2002/03/24 15:36:02 swa
1295 # Revision 1.25 2002/03/24 14:31:08 swa
1296 # remove more crappy files. set RPM
1297 # release version correctly.
1299 # Revision 1.24 2002/03/24 14:19:55 swa
1300 # set rpm package release in configure.in. nowhere else.
1302 # Revision 1.23 2002/03/24 13:06:49 swa
1303 # suse-clean now runs fine
1305 # Revision 1.22 2002/03/24 12:56:21 swa
1306 # name change related issues.
1308 # Revision 1.21 2002/03/24 12:43:57 swa
1311 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1312 # Renaming config files
1314 # Revision 1.19 2002/03/22 20:53:03 morcego
1315 # - Ongoing process to change name to JunkbusterNG
1316 # - configure/configure.in: no change needed
1318 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1319 # - PROGRAM = jbng@EXEEXT@
1320 # - rh-spec now references as junkbusterng-rh.spec
1321 # - redhat-upload: references changed to junkbusterng-* (package names)
1322 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1323 # - tarball-src: now JunkbusterNG-*
1324 # - install: initscript now junkbusterng.init and junkbusterng (when
1326 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1327 # - junkbusterng.spec:
1328 # - References to the expression ijb where changed where possible
1329 # - New package name: junkbusterng (all in lower case, acording to
1330 # the LSB recomendation)
1331 # - Version changed to: 2.9.13
1333 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1334 # right. If it obsoletes, why conflict ? Have to check it later)
1335 # - Summary changed: Stefan, please check and aprove it
1336 # - Changes description to use the new name
1337 # - Sed string was NOT changed. Have to wait to the manpage to
1339 # - Keeping the user junkbuster for now. It will require some aditional
1340 # changes on the script (scheduled for the next specfile release)
1341 # - Added post entry to move the old logfile to the new log directory
1342 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1343 # added to the startup list).
1344 # - Added preun section to stop the service with the old name, as well
1345 # as remove it from the startup list
1346 # - Removed the chkconfig --del entry from the conditional block on
1347 # the preun scriptlet (now handled on the %files section)
1348 # - junkbuster.init: renamed to junkbusterng.init
1349 # - junkbusterng.init:
1350 # - Changed JB_BIN to jbng
1351 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1352 # be used where necessary (config dir)
1355 # - The config directory is /etc/junkbuster yet. Have to change it on the
1356 # specfile, after it is changes on the code
1357 # - The only files that got renamed on the cvs tree were the rh specfile and
1358 # the init file. Some file references got changes on the makefile and on the
1359 # rh-spec (as listed above)
1361 # Revision 1.18 2002/03/21 23:00:00 swa
1362 # want to autogenerate stuff.
1364 # Revision 1.17 2002/03/19 19:30:04 morcego
1365 # - Fixing stylesheet checking on configure. If it is found, no further checks
1368 # - configure will now check for db2html or docbook2html (should work now
1369 # on SuSe without the docbktls package)
1371 # Revision 1.16 2002/03/14 22:32:32 hal9
1372 # Bumped the RPM version.
1374 # Revision 1.15 2002/03/08 20:00:28 swa
1377 # Revision 1.14 2002/03/07 18:25:56 swa
1378 # synced redhat and suse build process
1380 # Revision 1.13 2002/03/07 17:17:56 oes
1381 # (Hopefully) fixed for older make versions
1383 # Revision 1.12 2002/03/07 15:28:27 swa
1386 # Revision 1.11 2002/03/06 14:33:18 sarantis
1387 # Use proper temp file, not "abc".
1389 # Revision 1.10 2002/03/06 14:19:35 sarantis
1390 # Cleanup PID_FILE_PATH from redhat-dist target
1392 # Revision 1.9 2002/03/05 17:31:11 morcego
1393 # Search for docbook.dsl. Should solve portability problems for SuSe.
1395 # Revision 1.8 2002/03/05 14:07:42 morcego
1396 # configure now detects rpm topdir, and change GNUmakefile acordingly
1397 # (based on sugestion by Sarantis Paskalis)
1399 # Revision 1.7 2002/03/05 13:43:28 morcego
1400 # Checking for text browser, so redhat-dok can work.
1402 # Revision 1.6 2002/03/05 13:10:51 morcego
1403 # Changes to implement redhat-dok (Hal Burgiss)
1404 # Changes to make it work on other distros and out-of-the-shelf configurations
1406 # Revision 1.5 2002/02/27 15:30:39 hal9
1407 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1409 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1410 # Adding urlmatch.[ch]
1412 # Revision 1.3 2002/01/04 15:26:08 oes
1413 # Added tarball-src target
1415 # Revision 1.2 2001/12/30 14:07:31 steudten
1416 # - Add signal handling (unix)
1417 # - Add SIGHUP handler (unix)
1418 # - Add creation of pidfile (unix)
1419 # - Add action 'top' in rc file (RH)
1420 # - Add entry 'SIGNALS' to manpage
1421 # - Add exit message to logfile (unix)
1423 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1424 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1425 # make break in a more obvious way.
1426 # Adding .PHONY section.
1428 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1429 # Renaming various config files
1430 # Fixing CR->CRLF under Win32 (I hope)
1432 # Revision 1.39 2001/11/06 12:07:30 steudten
1433 # Add --clean for building rpm in target redhat-dist.
1435 # Revision 1.38 2001/11/05 21:35:23 steudten
1436 # Complete rewrite for the 'redhat-dist' target.
1437 # Checks for writeable RPM build directories for calling user.
1438 # So you must not be root, just set the modes to 1777 to
1439 # build a RH package.
1440 # Fix the upload-target to be arch independant.
1441 # Add target for 'solaris-dist' - coming soon.
1443 # Revision 1.37 2001/11/01 00:52:04 hal9
1444 # Redhat-upload stuff per Stefan.
1446 # Revision 1.36 2001/10/31 19:26:13 swa
1447 # automate process of uploading new releases
1450 # Revision 1.35 2001/10/15 22:14:59 joergs
1451 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1452 # the general CFLAGS already.
1454 # Revision 1.34 2001/10/15 18:28:06 steudten
1455 # remove config.cache for target clobber.
1456 # Cleanup make dist for RH and S.u.S.E.
1458 # Revision 1.33 2001/10/10 12:43:33 oes
1459 # Added ugly hack to make install target work at least for some setups.
1461 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1462 # Correcting actionsfile filename for Win32 INI build
1464 # Revision 1.31 2001/09/23 10:13:48 swa
1465 # upload process established. run make webserver and
1466 # the documentation is moved to the webserver. documents
1467 # are now linked correctly.
1469 # Revision 1.30 2001/09/19 17:55:49 oes
1472 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1473 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1474 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1475 # of build problems.
1477 # Revision 1.28 2001/09/13 15:19:08 swa
1478 # we want text files as well.
1480 # Revision 1.27 2001/09/13 13:11:37 steudten
1482 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1484 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1485 # Mac OSX (Darwin) support added.
1487 # Revision 1.25 2001/09/12 22:55:45 joergs
1488 # AmigaOS support added.
1490 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1492 # OS/2 port: update autoconf'd support for the platform.
1494 # Revision 1.23 2001/09/12 16:28:42 swa
1495 # added "make dok" section to generate html pages from
1496 # the sgml source documents. note that the we do not want
1497 # generated stuff in cvs.
1499 # Revision 1.22 2001/09/10 16:31:23 swa
1500 # buildroot definition in the specfile fucks up the build
1501 # process under suse. hence I moved it to the "rpm -ta"
1504 # Revision 1.21 2001/09/10 11:12:49 oes
1507 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1508 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1510 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1511 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1513 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1514 # Major changes to build system in order to fix these bugs:
1515 # - pthreads under Linux was broken - changed -lpthread to -pthread
1516 # - Compiling in MinGW32 mode under CygWin now correctly detects
1517 # which shared libraries are available
1518 # - Solaris support (?) (Not tested under Solaris yet)
1520 # Revision 1.17 2001/07/28 16:44:54 oes
1521 # Fixed sed LF->CRLF conversion and removed deprecated files
1523 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1524 # Added support for linking with POSIX threads library
1526 # Revision 1.15 2001/07/13 13:48:07 oes
1527 # - Moved STATIC #define for pcre to (ac)config.h
1528 # - Made -Ipcre depandant on static pcre compilation to
1529 # avoid version conflicts
1530 # - Included compilation and depandancies for new deanimate.c
1531 # - Made changes to the pcre/pcreposix/pcrs build process
1532 # as required by the new library autodetection in
1535 # Revision 1.14 2001/07/01 16:27:44 oes
1536 # Fixed misplaced dependancy
1538 # Revision 1.13 2001/06/29 13:18:36 oes
1539 # - added depandancy of filters.o on cgi.h
1541 # Revision 1.12 2001/06/12 17:15:56 swa
1542 # fixes, because a clean build on rh6.1 was impossible.
1543 # GZIP confuses make, %configure confuses rpm, etc.
1545 # Revision 1.11 2001/06/11 11:26:35 sarantis
1546 # RPM version should be the same as ijbswa version. The rpm release is
1547 # specified in the specfile.
1549 # Revision 1.10 2001/06/07 17:27:45 swa
1550 # added suse build section
1552 # Revision 1.9 2001/06/04 18:31:58 swa
1553 # files are now prefixed with either `confdir' or `logdir'.
1554 # `make redhat-dist' replaces both entries confdir and logdir
1555 # with redhat values
1557 # Revision 1.8 2001/06/04 10:44:57 swa
1558 # `make redhatr-dist' now works. Except for the paths
1559 # in the config file.
1561 # Revision 1.7 2001/06/03 17:09:09 swa
1562 # swa for oes: reversed my earlier change
1564 # Revision 1.6 2001/06/03 17:07:27 swa
1567 # Revision 1.5 2001/06/03 13:57:26 swa
1568 # compile cgi.c (for andreas' GUI)
1570 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1571 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1573 # Revision 1.3 2001/05/29 20:02:48 joergs
1574 # Changes for AmigaOS added.
1576 # Revision 1.2 2001/05/17 22:23:23 oes
1577 # - Added auto-generation of CRLFs for Win32 config files
1578 # - Added comment-prefix to all Win32-only options in the config file
1579 # and provided auto stripping of this prefix for the Win32 platform by make
1581 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1582 # Initial import of version 2.9.3 source tree